Hp Photosmart not working with new router

My Hp Photosmart D110a will not work wirelessly with my new Netgear N600 router. This is the second new router I have tried. With the first one Belkin I could at least get it to print from my PCs. But never with my IPad. Now the printer will not print from anything. I have reset it, entered new passwords etc. spent hours on the phone with tech support. What to do now?

@Ann99, welcome to the forums
I understand your Photosmart D110a model is not working with your new router. I will gladly do my best to help you.
I have some questions and some things for you to try.
1. Is the printer connecting to the wireless network successfully when you run the wireless setup wizard from the printers front panel or is the printer not found when you are running the installation from your PC?
2. What did tech support determine the issue was when you called them?
3. Here are some guides for you to try, these 2 guides relate to the questions I had asked in the first question:
Unable to Connect to a Wireless Network When Using WEP Encryption and Shared Key Authentication
The Printer Is Not Found During a Wireless Network Installation
4. What Operating System are you running on your computer?
5. Where are you running the installation from (disk, download or HP Printer Install Wizard for Windows for Windows)?
Please let me know all of the information and results from your troubleshooting above!
Have a terrific day
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Similar Messages

Printer not working with new router

I have a new router and my laptop with Windows XP is working Ok
My printer Deskjet 3520 network test result shows successful setup But it does not print when laptop requests
What can I do

Hi @Jobrig,
Welcome to the HP Forums!
I see that your HP Deskjet 3520 is not working with your new router, and I am happy to help with this connection issue!
For further assistance, I will need to know: if you are using a Windows or Mac Operating System, and the version number. To find the exact version, visit this link. Whatsmyos, and if the printer is able to make copies.
In the meantime, please see the following:
This printing guide, Print Jobs are Stuck in the Print Queue.
This website, HP Wireless Printing Center, may also help.
Hope these guides will help you, and thank you for posting!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Flash player does not work with new ICS Android 4.0.4 OS. Has this problem been addressed?

Flash player does not work with new ICS Android 4.0.4 OS. Has this problem been addressed? I am using Firefox Beta for android and I also tried just Firefox.

Please check the Play Store app for any Flash updates and install them if present.

Home sharing does not work with new mountain lion update.

home sharing does not work with new mountain lion update. Does anyone else have the same issue. Updated all computers in my home, deauthorized and reauthorized each computer. turn off home sharing and turned it back on. don't know what else to do..please help...

Our Apple TVs continue to lose connection ever since installing Mountain Lion on the host computer. The only thing that fixes them is to quit and relaunch iTunes, which only works unti the ATV goes to sleep. If a movie is paused for more than a few minutes and the ATV goes to sleep, pressing play again on the remote is greeted with "There are no movies on this computer" or "Turn on Home Sharing."
If we stop a video on one ATV and attempt to resume it in another room, the error begins again. The other ATV can't connect until iTunes is relaunched.
My guess is that it has something to do with the new [annoying] security settings. But I still haven't found a fix other than restarting iTunes everytime we want to watch something from our downloads. Fail.

Line-in not working with new driv

Has anyone else had issues with the line-in jack not working with new drivers? Is there a way to get it to work??Very frustrated. Is there a link to the beta drivers, they worked better for me then the new one.

The line input on the mini requires a 'line-level' signal, so the only microphones that work are ones that have an amplified output. Standard mics don't generate enough voltage to drive the mini's amplifiers.
That's the reason the mics work with the Griffin device (it has an amplifier) but not the mini directly.

Zen Micro Photo not working with new XP SP2 install

Okay so my Zen Micro Photo stopped being recognised on my computer about ten months ago when I upgraded to WMP (for BBC iPlayer - it's compulsory to have it). Anyway I li'ved with this and have now got thoroughly sick of the same songs and nothing new so I have done a fresh install (on a brand new hard dri've) of Windows XP SP2 WMP9 with the sole intention of using this install/hard dri've?for the player. I used the original installation disk and it prompted me to upgrade to WMP0 as I installed everything. There were no errors during the install and I rebooted when prompted to.
When I attach the player it is recognised by the machine (task bar icon and correctly labelled in System > Hardware > Device Manager which reports it to be?working okay) but the Creative media software says "player not attached" when it is. It is not visible on My Computer as a dri've so I STILL have no access to the player. Player screen reports "docked" with a logo and is flashes a charging icon. Driver v5.2.0.0. The player plays fine but hasn't had new music on in almost a year
There is nothing else on the XP install (IE6 and everything - argh!) I did the registry permission tweak thing mentioned?here:?http://support.creative.com/kb/showa....aspx?sid=9287?but it didn't do anything.
Any help greatfully received!

Re: Zen Micro Photo not working with new XP SP2 install. Have you installed this plug-in?
Creative PlaysForSure Devices Plugin 5.00.36 for Creative MediaSource 5 Player/Organizer
Filesize : 27.9 MBDownload

Airport Express not working with wireless router

I just bought Airport Express to play music on my stereo. My PC running XP is connected to my wireless router (TeleWell TW-EA510v3) with ethernet cable and airport express wirelessly. Problem is that Airport Utility (and iTunes) can't find AE if it's not connected to router with ethernet cable.
I can connect to AE from Aiport Utility by "configure other" option so it's connected to my wireless network correctly.
Is this kind of set up even possible (pc wired to router and AE wireless)? I have tried tried WEP, WPA/WPA2 and no encryption on my wireless network and AE connects ok every time but Airport Utility still can't find it. I even tried to make a WDS network but AE was not compatible with my router. Now I can't come up with anything else to try.
Is there anything else to do? Should I buy WLAN adabter to my PC and would AE work then?
Why can't Apple make Airport Utility to recognise AE with given IP like with "configure other" option? Should not be too hard to program?!
Message was edited by: -MTL-

Follow the isntruction lisetd below...they work.
Actually, the ae is a slick device, once you get it to work.
Make sure that one (or both) checkboxes in Airport Utility > Airport Express tab
(middle of page) are not checked...if one or both are checked, they limit (hide) wireless connectivity options (e.g., WEP-64) to choose from.
P.S. You must have patience: it may take a couple of minutes to establish the connection and turn the led to solid green. So, give it a chance.
===============================================================================
OMG!!! You are da man!!!
I have this streaming perfectly now!! Here is what I did for others to see and use (it does work perfectly)
Step 1) Clear/Reset the Airport Express
Step 2) Connect the Airport Express directly to the Router/Modem via Ethernet to set up Wireless
Step 3) Do it via the Manual Set-up Effort Listed Below following:
AirPort > Base Station
o Base Station Name: <rename or leave default>
o Base Station Password: <enter desired password>
o Verify Password: <re-enter desired password>
o Remember this password in my keychain: (optional)
o Set time automatically: (unchecked)
AirPort > Wireless
o Wireless Mode: Join a wireless network
o Network Name: <existing Linksys wireless network>
o Wireless Security: <select the encryption type of the existing wireless network> I have 64bit WEP
(Same as 40bit on the drop down menu)
o Wireless Password: <enter the existing wireless network password>
o Verify Password: <re-enter the existing wireless network password>
Music
o Enable AirTunes (checked)
o iTunes Speaker Name: <enter desired speaker name>
o iTunes Speaker Password: (optional)
o Verify Password: (optional)
o Click Update to write the new settings to the AX
In iTunes:
iTunes > Preferences... > Advanced > General
o Look for remote speakers connected with AirTunes (checked)
Once it congratulates you, unplug the ethernet cable
Verify in Aitport Utility that it still recognizes (if not, repeat the above). Note this may take a few minutes, so be patient.
Now place the airport express with your stereo (or whatever) and again be patient as it tries to find the network
(mine took 4 minutes) then it turns green and you are off listening to music on your stereo downstairs in another room.
Frustrating when it does not work at first, but keep trying and it will work!!
Thanks everyone for your help!!
===============================================================================

Logitech Pro 4000 not working with new Imac 24"

Just migrated from a G4 to the new Imac 24"
Cannot get the Logitech Pro 4000 to work with new mac.
Contacted Logitech and they said
"please note that the QuickCam Pro 4000 currently only supports up to Mac OS X 10.2.6"
However,the cam DID work ,even under 10.4.8 with the old G4...
Any ideas people..
Thanks!

Your nwe iMac is Intel based, which is why the old driver failed/ You could try the driver from IOXperts. They do not mention Intel support, but they do list your camera, and have a free trial.
<http://www.ioxperts.com/products/webcamx.html>

Isub not working with new imac

the help menu is telling me to make sure that the isub is plugged in, and then to make certain it is selected under sound preferences... the only problem is that the imac is not picking up that the usb is even plugged in- there is no isub option that comes up on the sound preferences.
the isub works fine on my older mac, but just is not being read on the new one. any guesses other than my old isub is obsolete with my new imac?
thanks
-pd

The iSub is sweet! It's the best sub I've ever had! There's no reason for it to NOT work with the new Macs. It's a bummer. I still have my iSub, maybe they'll start supporting it again someday.

Recovery did not work with new hard drive

The original Toshiba HD(250G, sata1) of my laptop( ) crashed.
I bought new one (320G, sata 2, Western digit )
The problem is that, when I tried to use the recovery CD that I used to use it with old HD before, it did not work with this new HD well!?
After cd1 and cd2 finish installing it ask to take it out then restart, I do so, but when it comes to setup setting of windows.
An error message come out says " Windows Setup could not configure Windows on this computer’s hardware”
It restart and says again " Windows could not complete the installation. To install Windows on theis compuiter, restart the installation."
I have been trying to solve this a lot, but no way
I tried what in this link, but it drive me with another problem http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_install/windows-could-not-complet...
I hope that I get the right thing to do, from ur forum by this post.
Thanks a lot

Did you folks search here for "advanced format drive"? People have had numerous weird problems with the new advanced format hard drives in older Toshibas. I can't look up all the threads for you. But here is one:
http://forums.toshiba.com/t5/System-Recovery-and-Recovery/Recovery-won-t-work-on-new-upgraded-hardri...

Xml code not working with new version

Hi,
my following code is not working with the xalan 2.7.0 version. Any one can help to convert this to work on new version.
import java.io.*;
import java.util.*;
import org.xml.sax.*;
import org.apache.xalan.xslt.*;
public class XML2Edifact
public static void main(String args[])
throws SAXException, IOException
if(args.length < 3)
throw new IllegalArgumentException(
"Usage is XML2Edifact in.xml xsl.xsl out.edi");
InputStream sin = new FileInputStream(args[0]),
sxsl = new FileInputStream(args[1]);
OutputStream sout = new FileOutputStream(args[2]);
EdifactFormatter formatter = new EdifactFormatter(sout);
XSLTProcessor processor =
XSLTProcessorFactory.getProcessor();
XSLTInputSource in = new XSLTInputSource(sin),
xsl = new XSLTInputSource(sxsl);
XSLTResultTarget out = new XSLTResultTarget(formatter);
processor.process(in,xsl,out);
}

Solved, had to repair the Z10 with the PC! Would have thought that upgrading software would have saved the environment so that this step was not needed (played with this for several weeks on-and-off).

Satellite A110 - WiFi switch is not working with new WiFi card

Hello Everyone
I have a problem with my Toshiba Notebook Satellite A110-178 (PSAB0E). I replaced the original WIFI card Intel 3945abg with Intel Link 5100 and on the new wifi card wifi hardware switch is not working.
New wifi card is discovered and drivers working correct but when I try to scan for wifi networks with IntelPro/Wireless software I have message to turn on hardware switch but it's turn on and not work. On old wifi card swich is working correct - orange light is on. On new card light is off and swich is not working.
Please help

Hi
Maybe you could enable the Wlan card using different way;
Go to device manager -> WLan card properties -> Advanced tab
There you could check if there is a option which would enables the WLan.
Its worth a try
Otherwise its a compatibility issue like suggested by PinkPanther
I read in different threads that this could happens if there is a different pin assignment on miniPCI WLan card and this could not match with the miniPCI slot on the mobo...

WRT54G v6 not working with new Motorola SB6141 on Comcast (IPv4 and IPv6)

My WRT54G v6 not working with a new Motorola SB6141 Cable Modem on Comcast (IPv4 and IPv6).
Yesterday, I had my old DOCSIS 1.1 cable modem and the WRT54G had been working just fine for the past 8 years.
Last night, I swap in the DOCSIS 3.0 SB6141 cable modem, and now the WRT54G keeps losing the internet connection. When I go into the status page for the WRT54G, I often do not see DNS servers and sometimes do not even see an IP address.
If I connect a PC directly to the SB6141 cable modem, I have no problems whatsoever. But whenever I connect through the WRT54G and power cycle both devices, then I have internet connectivity for about an hour before it drops out. I have noticed my gateway IP address and DNS servers change at that time as well. I can also force the Linksys to lose connectivity by doing a DHCP release/renew on the Linksys status page.
Is this behavior because of the dual stack (IPv4 and IPv6) coming through the cable modem from Comcast now? Is there any way I can keep using my WRT54G v6 now that I have the SB6141 cable modem?

You just have to install it correctly.
http://kb.linksys.com/Linksys/ukp.aspx?pid=80&login=1&app=search&vw=1&articleid=3686

Ipod does not work with new usb

i got my computer cleaned and a usb 2.0 pci card put in and now my ipod does not work with it, can anyone help

tell me what you mean and i will tell. i ask the guy in the shop to remove any viruses and put my files in order and also put winzip on, ad-ware se peronal and windows defender. and to install a usb2.0 pci card, so that i can put music onto my ipod faster. is this enough for you

Display not working with new operating system

I recently installed OS X version 10.8.2 and now my large apple display will not work with the MacAir. Anyone know how to fix this?

Return to place of purchase while in your 14 days from date of purchase window. You may have a defective monitor or GPU.

Hp Photosmart not working with new router

Similar Messages

Maybe you are looking for