HP Photosmart Plus 209a-m install for Windows 8 not working, driver problem?

I am trying to install the driver/software for HP Photosmart Plus 209a-m on my Windows 8 laptop and keep getting "the Wizard has detected a problem with the driver software for the selected printer". Seems like a catch-22 because that's why i'm trying to install it. I have a brand new hard drive (as of today) with nothing else on it except Norton, which i just installed. I shouldn't have corrupted drivers yet. if it's missing, why can't HP get it installed? I've downloaded hppiw and trying to install that. after i get the "problem with the driver" message, i select the option to install the full suite + driver, and it attempts another download (why is it doing that when i already downloaded the software?), then fails with "Your download was cancelled. You can attempt the download again by clicking Retry". Anybody know how to get me out of this loop and get the software installed?

hi,
sometimes norton does block the installation or the drivers download...
i would suggest you to turn of norton and complete the installation and then turn it back on..
Although I am an HP employee, I am speaking for myself and not for HP.
*Say thanks by clicking the "Kudos! Star" which is on the left*
Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue.
Although I am an HP employee, I am speaking for myself and not for HP.
*Say thanks by clicking the "Kudos! Star" which is on the left*
Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue.

Similar Messages

Itunes 11.1.3 for windows 7 not working

I have the same issue as the one mentioned on this page and have tried the solutions, but they have not worked for me.
http://support.apple.com/kb/TS4123
I've also looked at this long forum discussing the same issue, but it is about an older version of iTunes
https://discussions.apple.com/thread/2770908?start=0&tstart=0
The same message still hangs on my launcher, "Accessing iTunes Store", for an indefinite amount of time and it doesn't change.
I have installed itunes on a separate Windows Vista laptop, and it has the same issue.
The mulititude of proposed solutions in the aforementioned articles have not worked for me. What can I do, and any help is greatly appreciated

Can you check something for me please? I'd like to try doing a "Run as administrator" on your iTunes.
Quit iTunes first.
In Computer, open Local Disk C: or whichever drive you have your program files installed on.
If you have a 32-bit Windows, open the "Program files" folder.
If you have a 64-bit Windows, open the "Program Files (x86)" folder.
Open the "iTunes" folder.
Right-click on the iTunes.exe file and select "run as administrator".
Can you access the Store now?
(Permissions issues can sometimes mimic other problems ... if that's what is going on, the "Run as administrator" thing can sometimes get past the issue.)

Air Display for Windows 7 not working

I recently installed Air Display v1.6.1 for my iPad 2 and Air Display for Windows.
Both my laptop and iPad are connected to the same WiFi.
Whenever I click on my iPad's name in Air Display on my laptop, nothing happens. My iPad's screen still stays on the Air Display instruction screen with no flashing of the screen as I see on YouTube videos. Any help would be appreciated .

dwinpenny wrote:
Hi,
Have a new IMac and am trying to get Isight working in a Parallels Windows 7 VM environment.
Isight works fine in Mac OS (Skye, Oovoo, etc).
Tried to install the drivers from the Mac OS disk (appleisightinstaller.exe) and they appear to be installed okay.
BUT, while the device exists, I cant see any picture or when I click on settings get no settings to change. Additionally, the Isight led on the device never comes on.
Anyone got any ideas as to what I should do.
I have tried:
1. De-installing the driver and reinstalling
2. Have edited the registry in Windows to delete all references
The reason I would like to get this working is I am trying to use Polycom PVX video conferencing software (I need it for work) and so my idea was to run it in a Parallels VM as its only available for Windows.
Hope you can help
Cheers
Dave W
Welcome to Discussions, Dave (dwinpenny)
I don't use Windows®, but here are a couple things to consider if you have not already done so and do not get better help here.
(1) Does this help you? http://kb.parallels.com/5028
(2) Consider XMeeting as a possible OSX alternative for connecting to your work's Polycom system:
http://xmeeting.sourceforge.net/pages/index.php
EZ Jim
Mac Pro Quad Core (Early 2009) 2.93Ghz w/Mac OS X (10.6.2) MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.2)
LED Cinema Display G4 PowerBook 1.67GHz (10.4.11) iBookSE 366MHz (10.3.9) External iSight

Isight drivers for WIndows 7 - not working?

Hi,
Have a new IMac and am trying to get Isight working in a Parallels Windows 7 VM environment.
Isight works fine in Mac OS (Skye, Oovoo, etc).
Tried to install the drivers from the Mac OS disk (appleisightinstaller.exe) and they appear to be installed okay.
BUT, while the device exists, I cant see any picture or when I click on settings get no settings to change. Additionally, the Isight led on the device never comes on.
Anyone got any ideas as to what I should do.
I have tried:
1. De-installing the driver and reinstalling
2. Have edited the registry in Windows to delete all references
The reason I would like to get this working is I am trying to use Polycom PVX video conferencing software (I need it for work) and so my idea was to run it in a Parallels VM as its only available for Windows.
Hope you can help
Cheers
Dave W

dwinpenny wrote:
Hi,
Have a new IMac and am trying to get Isight working in a Parallels Windows 7 VM environment.
Isight works fine in Mac OS (Skye, Oovoo, etc).
Tried to install the drivers from the Mac OS disk (appleisightinstaller.exe) and they appear to be installed okay.
BUT, while the device exists, I cant see any picture or when I click on settings get no settings to change. Additionally, the Isight led on the device never comes on.
Anyone got any ideas as to what I should do.
I have tried:
1. De-installing the driver and reinstalling
2. Have edited the registry in Windows to delete all references
The reason I would like to get this working is I am trying to use Polycom PVX video conferencing software (I need it for work) and so my idea was to run it in a Parallels VM as its only available for Windows.
Hope you can help
Cheers
Dave W
Welcome to Discussions, Dave (dwinpenny)
I don't use Windows®, but here are a couple things to consider if you have not already done so and do not get better help here.
(1) Does this help you? http://kb.parallels.com/5028
(2) Consider XMeeting as a possible OSX alternative for connecting to your work's Polycom system:
http://xmeeting.sourceforge.net/pages/index.php
EZ Jim
Mac Pro Quad Core (Early 2009) 2.93Ghz w/Mac OS X (10.6.2) MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.2)
LED Cinema Display G4 PowerBook 1.67GHz (10.4.11) iBookSE 366MHz (10.3.9) External iSight

HP Help Number for Windows 7 not working

I have a problem with my Windows 7 upgrade. The instructions from HP say that in the US to call 1-888-447-0150. That number answers, there is a beep and the line is cut off.
Why is the number given in the HP instructions not working?

Yes, it doesn't work for me either. It connects, then a very short music blip plays and it's then transferred to nowhere and disconnects.
HP has gone to the dogs!
My install of Windows 7 got to the last item on the list, about three quarters of the way through the install (the green bar) and has hung for about 10 hours now without a sign of movement, and HP is nowhere to be found to help.

Apple software update for windows does not work properly

Apple software update does not work properly

I FIXED IT!! I can't believe it . I actually figured out how to make it work(well sort of). My Apple Software Updater now works (almost) perfectly and I just successfully downloaded and installed itunes 10.6.3.25 through it!!!
Ok , the way I see it, either the latest itunes update or the recent Windows Patch Tuesday on June 12th, 2012 must have inadvertently removed the Administrative Rights from the Apple Software Update Tool .lnk file.
So you must go to where the file resides on your hard drive - for me that was C:\Program Data\Microsoft\Windows\Start Menu\Programs - Right click on the Apple software Tool icon and choose properties. Click on the compatibility tab. At the bottom of this tab click on "change settings for all users" and hit Yes at the UAC pop-up. Now make sure you place a check in the "Run this program as Administrator" under the Privilege level section at the bottom. Hit Apply and then OK. The hit Ok again to get off the properties pop-up.
When I went back and clicked on the Apple Software Update shortcut, I got a UAC pop-up asking me if I wanted to proceed(something I had always, in the past, gotten but haven't since this problem started). The Apple Software Update tool came up and to my suprise the progress bar STAYED and started to slowly fill up partially with the green progress bar. Viola, the itunes 10.6.3 update showed up on the top part of the screen as a new update needing to be installed - the bottom screen, as usual, had the changelog info for the 10.6.3 update. I clicked on install and , again, Viola. the update downloaded and installed flawlessly. I had to reboot my computer and when it restarted, itunes was working perfectly and it was correctly showing as itunes v10.6.3.25.
I say it is almost or sort of fixed because when you click on the Apple Software Update shortcut after the 10.6.3 install it goes back to doing the same thing it did before(i.e. processing for a second and then saying there are new updates but showing a blank field). Maybe this is the way the software now looks if there are no updates available to install - maybe Apple is working on this to eventually get it back to normal. All I know is the process I outlined above worked for me(at least to get the ASU to recognize and properly download and install itunes 10.6.3). It's certainly not perfect, but it worked. Please try this method and let me know what results you have with it. Good luck.

ICloud Control Panel for Windows 7 not working

I installed iCloud on My pc running Windows 7 32 bit.
It installs fine, but when I go to sign in, it says "You can't sign in because of a server error."
Any ideas on how to fix such a problem?

Have you solved the problem?
I'm now struggling with it
Please post how you dealt with it.

Why isn't the download for Windows 32bit not working/showing up on the download page???

I've tried multiple browsers?

They are not showing up at all in my library. They only show up under the "on this iPhone" section when the old phone is plugged into iTunes. I have tried syncing again and still no solution. The music that is missing is all from CDs that I previously imported into iTunes.
Thank you for your reply.

Jabber Client for Windows video not working with ManyCam

Hi everyone. We've been kicking around the Cisco Jabber client and I've noticed a small issue when it comes to video. I use a software package called ManyCam (http://www.manycam.com/) which creates a web cam that allows me to put effects on my actual web cam's video feeds. Primarily I use it when I'm in a remote office and have a video stream back to the main office I can put effects on the screen like "On a conference call" and such so people won't get upset when they approach me and I fail to respond to them. I use it with other applications just fine but with Cisco Jabber (v9.2.0 Build 496) when I attempt to set it the ManyCam camera as the video source in the video configuration of Cisco Jabber the preview doesn't appear. As well when I connect to another Cisco Jabber user they do not see my video stream.
Anyone else notice this? Or does anyone else have a link to some similar software that will give me equivalent functionality to ManyCam that works with Cisco Jabber?
Thanks!

Only if they are on a Mac using iChat(gmail account).
Have a look at http://mail.google.com/videochat

Why itunes for windows is not working and downloads have errors

Hi, few days ago I download the actualization of itunes and from that day I can syncrnonize because itunes cant open because an error

What does the error message say? (Precise text, please.)

Error while installing printer software for HP Photosmart Plus 209a-m on Windows 8.1 64 bit OS

I am getting below error while installing printer software of HP Photosmart Plus 209a-m on Windows 8.1 64 bit OS. Can you please help me resolve this error? Thanks in advance.

Hi tarunkw,
Follow the steps below and check if that resolve the issue:
1. Open Mcafee software, from the Virus and Spyware Protection section click on Schedule and run scans. Click on Real time scanning and then on Turn Off. select till I restart the PC and confirm by clicking the Turn Off button.
Now try reinstalling the HP Software and check if the installation goes as expected.
If the issue persists continue following the next steps below:
2. Open the run dialog by clicking both the Windows key and the R key on your keyboard. Type %windir% and click on OK.
3. Type hpoins*.dat into the top search bar, if there are any results rename the extention into old instead of dat. (e.g. hpoins1.old)
4. Type hpwins*.dat into the top search bar, if there are any results rename the extention into old instead of dat. (e.g. hpwins1.old)
5. Launch the Run dialog by clicking both the Windows key and the R key on your keyboard. Type MSIEXEC /UNREGISTER into the Run dialog and click on OK.
6. Launch the Run dialog by clicking both the Windows key and the R key on your keyboard. Type MSIEXEC /REGSERVER into the Run dialog and click on OK.
7. Run the installation file and check for any difference.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

ITUNES 10.6 is not installing for windows 7

ITUNES 10.6 is not installing for windows 7;

Thasnk y.ou I just got my laptop and didnt get why the itunes icon wasnt popping up on my pc and i was getting no further qustions like i did when i installed it on my work computer. Well thanks again Up The Iron's Iron Maiden Rules

Windows 7 64 bit will not install itunes..it tries to install and keeps telling quick time for windows did not properly install any help?

windows 7 64 bit will not install itunes..it tries to install and keeps telling quick time for windows did not properly install any help?

Hi Tamekia,
I am sorry to hear nothing has worked yet. I have looked up some additional information and possible solutions. Follow the steps in this document to perform a level-three uninstall, register the Windows Installer Service, and then reinstall the HP software. An uninstall and reinstall of the software deletes and overwrites any of the files that might cause the error and resets the Windows Installer. HP recommends that you download the latest software from the HP Web site to remove any files that might be causing this error.
Level-three uninstall, and register the Windows Installer Service
Note: The title of this document is not specific to the issue you are experiencing or the operating system you have, but the 3 steps and instructions are what I suggest we do to resolve the issue you are experiencing.
Hope this helps.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

HT1926 iTunes will not install on my computer (Windows 8) and i tried everything in "Issues installing iTunes or QuickTime for Windows" but nothing worked. any help?

iTunes will not install on my computer (Windows 8) and i tried everything in "Issues installing iTunes or QuickTime for Windows" but nothing worked. any help?

Many thanks.
Error 7 (Windows error 127)
Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

I talked to your guys yesterday about installing correct version of Lightroom 5 which I legally owned, and your guy provided me a download link (different from Creative cloud account), but somehow it was for Windows version not for Mac version. I would ve

I talked to your guys yesterday about installing correct version of Lightroom 5 which I legally owned, and your guy provided me a download link (different from Creative cloud account), but somehow it was for Windows version not for Mac version. I would very much like to download a Mac version, so please send my correct web link. By the way my s. number for Lightroom 5 up is [removed], and I also have s.number for 4 up and 3 full.

The latest non-CC version of LR 5 is 5.7.1 and download links are available on the Adobe Updates page:
http://www.adobe.com/downloads/updates/
Both Mac and Win links are there.
If you are asking for a LR 5 CC link, which wouldn't require a serial number, please be more clear about that.

HP Photosmart Plus 209a-m install for Windows 8 not working, driver problem?

Similar Messages

Maybe you are looking for