Hp photosmart plus b210 wont print on dark paper

If I use dark paper the printer will just spit it out and print on the next white page.  Is there a setting to allow printing on dark paper?
This question was solved.
View Solution.

I am glad I could help.  I hope you do not have too many of these to print - while the strips are reusable it could get a bit tiring if there are many to print .
Bob Headrick,  HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Similar Messages

  • I have a photosmart plus b210 e print and when I print with a black back ground I get lines

    I have a photosmart plus b210 e print and when I print  with a black back ground I get lines.  What can I do to eliminate the
    lines in the photo
    Thank You

    Hey appollus,
    Do you get these lines only when printing with ePrint? If not, it sounds like a printhead issue. Here are the steps to fix the issue.
    1. Go to the setup menu on the printers front screen.
    2. Go to tools.
    3. Go to clean printhead
    You may need to do this a few times to completely remove the lines in the print.
    Although I am an HP employee, I am speaking for myself and not for HP.
    If I have resolved your issue, feel free to provide Kudos and make sure you mark this thread as solution provided.

  • Photosmart Plus B210 series is stuck on "canceling job"

    Photosmart Plus B210 series printer is stuck on "canceling job."  I have tried deleting and adding it back on. Printer is working on its own and appears to be recognized by my iMac but I can't access the supply levels or print anything. Under printer setup the location is blank...suggestions? help?

    Hello @Amiera , and welcome to the HP Forums, I hope you enjoy your experience!
    I can see you're running into compatibility issues.  I would like to help.
    I would suggest Uninstalling the Printer Software.
    Once it is uninstalled, I would suggest putting your system into clean boot mode within the Microsoft configuration.  You can do so by following this document: How to perform a clean boot in Windows.
    Once the computer is in clean boot mode, I would suggest reinstalling the HP Printer Install Wizard for Windows.
    Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • OK to print iron-on transfer sheet w/HP Photosmart Plus B210 or HP Officejet 6500 E709Printer?

    I have two color printers, but want to make sure it is SAFE to print an iron-on transfer using them.  I am not sure if they are laser or inkjet printers (kind of not the tech-y type!).  I don't want to melt the paper inside the printer and break my machine.  Which machine can I print my iron-on's with:
    HP OfficeJet 6500 E709 Series
    or
    HP Photosmart Plus B210 Series

    Hi,
    I have done something similar with an inkjet printer in the past (with succesful results) but as I'm not familar with the exact transfer paper you're using I can't be sure that you'll get the same results.
    They are both inkjet printers and there shouldn't be an issue printing iron-on's as long as the transfer paper is a standard size and feeds through the printer.
    "Although I work for HP, I'm speaking for myself and not on behalf of HP"
    "Say "Thanks" by clicking the Kudos Star in the post that helped you.
    --Please mark the post that solves your problem as "Accepted Solution"

  • Photosmart Plus B210 - Error Message when attempting to add printer

    When attempting to add our Photosmart Plus B210 on a computer with Windows 7, we get the error message: "Active Directory Domain Service is currently unavailable".  We have installed the drivers from the disc and have attempted both USB and Wireless installation--neither have been successful.  We have uninstalled and reinstalled mulltiple times as well as followed another forum suggestion to run msconfig and change startup to diagnostic, etc.  HP Print & Scan doctor has not helped resolve.  Any ideas out there?

    Hello felenti,
    Please let me take a moment to say "Welcome" to the HP Forums. I hope you enjoy your experience!
    To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I see that you are having some issue with the installation of your printer to your computer.  I also see that you have ran the HP Print and Scan Doctor and it did not resolve the issue.
    One step that I do suggest we try is to run the HP Printer Install Wizard for Windows.
    Please write me back with the results of the Wizard.
    If I don't hear back from you today, I hope you have a Great Wednesday.
    Cheers,    
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • HP Photosmart Plus B210 the printhead installed is not intended for use in this printer or damaged

    I changed a black cartridge on Friday and printed a couple of pages with it.  Left work and when I came back this monday morning, I had to change the color cartridges, all three.  After doing so, I got this message and it hasnt left the screen since.
    I followed the advice on cleaning the 3 areas with coffee filters as mentioned by a similar post, reset the printer but I still got the same message after turning it back on.
    What else can I try?  The printer is about 1 year old and I only print 20 pages a month with it.

    Hello @quique123,
    Welcome to the HP Forums!
    I understand you're receiving a message on your Photosmart Plus B210 stating "The printhead installed is not intended for use in this printer or damaged". I will do my best to assist you!
    Please make sure this printer is plugged into a direct wall, not a surge protector. I just want to see if this makes a difference. Follow this entire HP document on 'Problem with Printhead,' 'Printer Failure,' 'Ink System Failure,' or a '0x...' or a 'C2...' Error M...
    If you're receiving the same error message, then please contact HP technical support for further assistance. Click here to find out: HP Worldwide Contact. Good luck.
    I worked on behalf of HP.

  • Printed photos on my HP Photosmart Plus B210 from my iphone a few times, but now it will not respond

    Printed photos on my HP Photosmart Plus B210 from my iphone a few times, but now it will not respond.  My phone still recognizes the computer, but nothing happens.

    Hi @maka4868
    Welcome to the HP Support Forums.  I understand that you are no longer able to print to your Photosmart Plus B210 printer from Microsoft Word.
     I am presuming that you are using a Mac Operating System as indicated at the top of your post.  I have done some research and found Microsoft’s document titled Troubleshooting damaged documents in Word for Mac.  It has the steps when printing from Microsoft Word 2008 for Mac.
    Please let me know the outcome.
    Regards,
    Happytohelp01
    Please click on the Thumbs Up on the right to say “Thanks” for helping!
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    I work on behalf of HP

  • Foggy pictures with Photosmart Plus B210

    Hi.
    I am having quality issues when printing my holiday pictures on my HP Photosmart Plus B210.
    The pictures have been taken with a Nikon SLR and printed directly from the SD card.
    regardless of the photo quality, all not fully lit parts of the picture becomes VERY foggy an lacks details when printed.
    And it does not even have to be that dark areas. Even just dark colors in bright pictures get foggy.
    I hope someone can give me some advise as to whether something can be done in regards to printer settings.
    regards.
    Hans Ole

    Hi there,
    This article should resolve the quality of your prints. Give the steps outlined a shot and let us know if it helps.
    Best of Luck!
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • HP Photosmart Plus B210 - Driver download -

    just got new pc.  Also gOT A CABLE FOR THE ABOVE "WIRELESS" PRINTER.
    added the printer thru the add printer process.
    Tryed to download the driver from the HP website, but continually get download failure - Failed to load C:\Program Files\HP\HP Photosmart Plus B210 series\bin\DIFxAPI.dll'.LoadLibrary error code 193
    Also have received HP instalation failure msi 1603 document and tried the details from that process.  
    No success
    I can print wirelessly from my iPhone to the printer

    Hello jwellesp ,
    Welcome to the HP Forums.
    I see that you are having some installation issues.
    Lets start off by removing the usb cable from the printer and the computer and leave it disconnected until further notice.
    Download and run the HP Printer Install Wizard for Windows.
    The wizard will give you connectivity options so please do not connect any cables until prompted to do so.
    If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
    Cheers, 
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • IPad no longer connecting to HP Photosmart Plus B210 after changing black tore cartridge

    I had my iPad nicely connected to my HP Photosmart Plus B210.  However, after changing the black tore cartridge I am no longer able to print from the iPad.  The printer statur report and the wireless network test both show everything is OK.  Most of the time the iPad recognizes the printer and accepts the print command without any error messages.  However, sometimes it returns the message that the printer is offline even though it found the printer earlier.  Any solutions?  Thanks

    I too have a B210 and the IPAD has printed marvelously via WIFI for about a half a year. Now, when the IPAD print radio button appears it still lists the B210 is available as if all is good but the printer doesn't come to life when the print command is issued. Printer sez it is connected to the router, too. I have reset the router and the printer a number of times and the printer sez everything is good. But, I can't print any longer from the IPAD. bummer.

  • HOW DO I SET UP MY FAX for a HP PHOTOSMART PLUS B210 ?

    HOW DO I SET UP MY FAX FOR A HP PHOTOSMART PLUS B210 EPRINTER ?

    Hi shea31,
    Unfortunately, this printer doesn't have a fax function. You can also check the printer's product specifications.
    ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
    Cheers!
    * If this post has helped you, the White Kudos star on the left is a great way to say thanks!
    * Please mark Accept As Solution if it solves your problem so other users can benefit as well.

  • Installed Photosmart Plus B210 not listed as an option in Windows Photo Gallery

    My new Photosmart Plus B210 us not listed in the drop-down printer menu when trying to print from Windows Photo Gallery.  I have to "add" the printer each time I want to print.
    I'm running Windows Vista.
    Thanks!

    Hello Carrie,
    How are you adding the printer? And, how are you connected to the printer?
    Miles
    HP Employee

  • I'm trying to scan a document into my computer from an printers\hpf7a4f8 (hp photosmart plus b210.

    I'm trying to schan a doc into my computer from a  Printers\HPF7A4F8 (HP Photosmart Plus B210 series).  I'm using windows 7.  All other funtions seem to work but when I try to scan the doc, the HP message says it doesn't find the printer (yes, the printer it brought up to ask what I wanted to do).

    DAReese13 wrote:
    I can't believe that iTunes doesn't have this feature, as even the most basic music players always have this.
    It does have that feature. Why would you assume that it doesn't?
    DAReese13 wrote:
    I'm trying to find an easy way to import my MP3 collection into iTunes without moving, copying or changing it.
    Okay, no problem.
    If the top bar menu is not displayed in top left of your iTunes Library, use the CTRL+B keys to turn it on:
    On that menu, use File/Add Folder to Library and navigate to the folder you wish to add:
    If you wish to add just one song, notice the File/Add File to Library command on that menu as well.
    Alternatively, you can drag-and-drop from the file's location into your iTunes Library.
    That's all there is to it.
    By the way, it is possible to have Amazon MP3s downloaded to your computer and then automatically added to the iTunes Library by the Amazon downloader. I do it all the time.
    Message was edited by: the fiend

  • Photosmart Plus B210 won't respond

    I have just purchased a Photosmart Plus B210 printer and it seems to become unresponsive after being on overnight.  I can not even turn off the printer or activate the touch screen.  If I unplug the cord and plug it back in everything seems to work again. 
    Any suggestions?
    Thanks.
    Rich

    Any updates on the firmware update?  I just bought a B210a last week and have this issue(B06998FC).  Did an online update with printer, said all updates were current.. Trying to decide whether to return printer or wait for firmware fix..

  • PhotoSmart Plus E B210A Printer Settings

    I just bought the Photosmart Plus E (B210a) printer, and I think some settings are missing in the printer properties/preferences.  Usually "Color Management" (advanced) seems to provide a wide variety of adjustments to the ink settings.  All I get are monitor/display menus. 
    The printer is very nice, and It seems to be functioning normally, but I can't find any menus to adjust color saturation (for the individual inks), brightness, cool/warmth, sharpness, etc.  There were also presets for draft, best, charts & graphs, and others to select for quick setting adjustments.
    Does the B210 not offer any of these customizations?  I've tried the driver on the CD and the driver from the website, and neither make a difference.  My previous few Photosmart printers always had these options. 
    I was told to try setting the driver for the 9800 Deskjet, but that didn't help either. 
    Maybe I am trying to find a menu that doesn't exist, but documentation seems to hint at these settings... 
    Can anyone confirm that such menus exist?  Anyone have an idea for a solution?
    Thanks for your time.
    Brian
    Windows7 32-bit Ultimate, Printer is wirelessly networked

    Wow, that was fast.  Well, before I give you a "kudos", I should've mentioned I tried that driver.  Several people referenced that, and so I used it as requested.  Still, no luck.
    I must admit, I didn't install the coupon option, or the bing bar, but I assume my color options don't depend upon those items being installed!
    So...I've tried the driver that CD came with, the driver on HP's site, and two alternate drivers (9800 and 920c deskjets). 
    I'm really stumped, as I'd like to keep the printer, but nobody seems to know how to fix this issue...or if it is, indeed, an issue.  Someone in Tokyo said those features don't exist for this printer (which I do not believe to be true). 
    I don't know if something is blocking the driver from connecting to these options, but it is very frustrating.
    Brian

Maybe you are looking for

  • .Mac Subscription, 2 Apple Accounts, 1 Big Mess

    I moved to Mac Last February and I got the subscription to .Mac which assigned me a new apple account (@apple.com ). All my purchases with my previous (@msn.com) account I was able to transfer from my IPhone to my new IMac but the problem is that whe

  • Only the first two episodes showing

    When I do a search on my podcast in the iTunes Store, the show comes up fine but only the first two episodes are listed. When I click on the show image and go to the show page only those two show up, all four of the episodes are displayed in the othe

  • MIRO - Withholding tax

    All, I am entering MIRO for a vendor which is subjected to withholding tax . In same MIRO I am entering 5 POs with 5 different materials which are subjected to 5 different withholding tax codes . Now in withholding tax tab , I need to enter different

  • Updates ruin my system

    I had 10.4.3 and I updated all the way to 10.4.10 (PPC). Then I tried to download Safari 3 (beta) after that regular safari disappeared! I cannot download anything, but every time I try to install a new download it flashes in the doc and then does no

  • Problem in database recovery thru RMAN

    I am completely new to RMAN. I took full backup thru RMAN and as per suggested by some document, I deleted controlfile, datafile and SPfile in order to learn recovery thru RMAN. now, when I try to connect to RMAN catalog I'm getting the following err