HP Photosmart Prem Web C309n-s

I cannot get this printer to actually print in Adobe Photoshop Elements 8.0 .  I choose the printer and then the HP Fax screen comes up.  Adobe says it is not their issue it is an HP issue but HP has not been able to give me any suggestions.
Any help is appreciated... it is such a pain.  I have to save documents as jpgs to print them in another program..HELP

I have Photoshop Element 8, Window 7, HP Officejet Pro 8500 A909g.
Have the same problem with PSEl8, shows fax and printer; printer is chosen, but comes up fax. How/where do I change the name of the fax to see if that will work for me.
I've sent in a case to Adobe on this. No reply as yet.
I installed latest HP from website but didn't get all features. But photoshop worked then because it only had printer listed, not fax. I uninstalled HP. Had to install latest full feature software/device from HP. And got the same problem all over again because PSEl8 showed both fax and printer.
Looks like a fax problem between HP and Photoshop interface. Hope just changing the name of the fax will do for me as well. But we shall see.
I assume PS El 8 works with 64bit. Can't find where that info is mentioned in system info. Maybe that's a problem too between HP and Photoshop. HP now works with 64bit since I installed latest software/devices. Dell Tech support told me to check all software programs to make sure they work with 64bit. Don't know where to look with PSEl8 besides system info, which shows video card driver with 64bit; but plugplug.dll shows plugplug standard dll as 32 bit.
This is a big mess that Adobe and HP better figure out.

Similar Messages

  • Photosmart Prem-Web C309n-s. No warning for low ink levels.

    Printer runs out of ink with no warning, and there is no way to verify the ink levels to monitor remaining level.  :-(

    The ink levels can be checked from the printer front panel or computer as described here.
    If the cartridges appear to run out of ink prematurely check the vents as descried in step 3, solution 6 here.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Photosmart Prem-Web C309n-s - How do I reattach parts in tray housing?

    In trying to fix a printer problem, I removed the main paper tray.  When I tried to reseat it, a plastic guide (~2" long) and a related metal torsion clip/spring (~2" long) became unattached from the opening into which the main paper tray is inserted.  How do I reinstall these parts (can't find a diagram of how they fit together in side of the tray housing)?

    I need help too!....This part just came off. How important is this part in relation to the pick up rollers? I am having a problem with these rollers not picking up and message code 0x61011beb is on display.
    Help, someone.....please.

  • Wireless Printing Problems - HP Photosmart Premium Web C309n

    I hoping someone can help me with some printing issues I am currently having with my C309n.
    When trying to print via my web browser (Firefox 3.5.7), the printer stalls while trying to respond, and when it does begin to print, it moves incredibly slow. I had the same problem when I first set up the machine when trying to print photos, but that issue seems to have resolved itself (I did nothing in particular; one day it just worked). I have no problem printing from programs such as Word, PowerPoint, etc.
    The web printing issue still remains and I was hoping that someone could confirm that I have used the optimal wireless/set up settings before I start changing things in an attempt to solve my current problem. Also, of course, if anyone is aware of a quick fix for my printing issue, I would appreciate it.
    Printer: HP Photosmart Premium Web - C309n
    Computer OS: Windows 7 x64 Professional
    Anti-Virus: Norton 360 Premier
    Connection: Wireless
    Type: Automatic DHCP
    Port: 9100
    Router: Linksys Wireless-N Gigabit Router (WRT310N)
    Firmware: v1.001
    Settings of Router are as follows:
    - Network Mode: Mixed (a, b, g, n)
    - Security: WPA2 Personal
    - Encryption: AES
    - Radio Band/Wide Channel/Standard Channel: Auto
    Also, I apologize if I provided too much info; just wanted to make sure I covered everything. Thanks in advance for any help.

    I'm also having slow print issues on the HP Photosmart Prem-Web C309n-s.
    The issue happens in multiple applications, such as printing a photo from HP Photosmart Essentials 3.5, printing an email from Internet Explorer 8, etc.  I am running Windows Vista Ultimate 64-bit with Service Pack 2.
    Also, noteable is that it happens on 2 PCs.  Same model purchased at the same time.  The issue seems intermittant and it seems to affect my wife's PC more than mine.  It may just be that she prints more???
    I did not think it was a networking issue, but both my PC and printer are wireless.  I will direct my PC and see if the issue goes away.
    My wife prints all her own photos and scrapbooks.  She is extremely frustrated and wants it out of the house.  I'm going to contact HP Support tonight.  If they cannot fix it in a reasonable time, I'm going to try and return it.
    It also seems to rip through XL ink cartridges faster than any HP printer we have had.
    Best regards.
    BarryISU

  • SW installation failure on Photosmart Premium Web c309n-s

    Hello,
    I have tried 3 times from the CD and 2 times from the downloaded compete install package from HP to load the software associated with my Photosmart Premium Web C309n-s printer to no avail.  
    I get ERROR CODE 2203 - FATAL ERROR MSI.HPPHOTOGADGET
    The printer seems to hook to the web (I can go to google, disney, etc) but when trying to download the updates it says are out there it fails.
    TIA for any helps,
    Chips

    Network status:
    Active connection type:  wireless
    URLs for Embedded web server :  http://HP0D6176
    And in the Wired or Wireless section of the report (depending on how your printer is connected): 
     - What IP Address is listed?
    IP address:  192.168.1.100
    subnet mask:  255.255.255.0
    default gateway : 192.168.1.1
    configuration source:  DHCP
    primary dns server : 192.168.1.1
    secondary dns server: 209.18.47.61
    I test use wired not wireless  it not working same
     internet connection it work  i'm sure because  i can use app  snap fish  but other appp not working
    do you have solution for fix this problem ?
    Thank so much 

  • C309n-s Photosmart Prem Web

    I have had this printer for about 2 years, no real problems.  Suddenly today every time we go to use it, the machine sounds like it's going to print, but then gives me an error message stating there is no paper in the tray.  There is.  There are no jams, and I have tried installing various amounts of paper.  I have removed all parts of the paper tray that can be removed, but when reassembled it still doesn't work.  Any suggestions?

    Thanks very much for the solution feedback… We already followed all the HP Support Instructions and in all the forums too and none worked. We are still unable to print black (and now photo black too after installing replacement printhead assembly from an Amazon.com vendor who happens to be a HP reseller). Still same problem “alignment failed” message. We did lots of uninstalling and reinstalling the C309N drivers, realigning and cleaning and resetting to factory defaults and we almost depleted 2 sets of HP Genuine 564 colors, black, and photo black that we purchased from Staples.
    Prior to buying this printer assembly part from an Amazon vendor who also happens to be a HP reseller, we already spent 72 clock hours for troubleshooting plus 1 set of inks and after we receive the order of printhead assembly, we spent 16 hours of troubleshooting time.
    We believe the problem can be any of the following: the part that supports the printhead assembly (looks like the HP Reseller only gave us the printhead that holds the cartridges but not the one that holds the printhead assembly); or HP shutdown our C309n-s printer (you never know they have secret technology to shutdown your printer after 3 years using their forced product detection technology); or their chips inside the printer went bad.
    We are out of extended warranty. Staples does not offer any warranty over than 2 years and we purchased from them the warranty. So we are toast. Hate HP now! Moreover, lost our faith in HP products too! We may not consider buying any extended warranty from Staples because they only run for maximum of 2 years which by the way is also expensive for just a 2 year plan max.
    Called HP and the best they can do is replace the printer and charge us 15% discounted of the new Photosmart Touchweb model plus we have to buy their expensive warranty too. Our small company refused this offer from HP. We only want to pay $50 max for the new Photosmart Touchweb plus 4 years of free warranty. You cannot blame us because we already spent $399 on this printer last November 2009. In addition, the countless hours of troubleshooting and wasted inks.
    ***HP we want at least $200 credit or refund on the price of the original price of the C309N printer plus 2 years of free warranty so we can purchase from you a reliable all in one printer. This is our last offer of resolution.

  • Problem with touch screen on wireless Prem Web C309n

    After the last automatic update was done the touch screen will no longer iniaialize - it just shows the hp logo and the on/off switch just continuously flashes.  I am not able to use any of the other functions like copying, scanning and faxing since the touch screen is not working.

    Had not used my c309n for several years as I found  its operation  to be unreliable.  Decided  to try to make it operational once again.  Finally, was able to install the software and drivers.  The main problem is  with the touch screen.  At first, and still,  it mainly does not go beyond initializing.  However, at times the touch  screen is populated  but  will not function.  Then a parituclar item will highlight but not work.  Even when the screen items are present  nothing works well enough to  make any settings.  Prior to this I had one of your printers for scanning slides.  It was so defective that HP replaced it with the C309n which hasn't proved much better.  I also have an HP Photosmart 8750 which thankfully works just fine. A disappointed customer - R. C. Kiser

  • Can't install drivers for HP Photosmart Prem C410 series

    OS = windows 7 SP1 64 bit.
    Printer = HP Photosmart Prem C410 series.
    Driver = PS_AIO_07_C410_FSW_Full_Win_EMEA_140_222-4
    in the middle of the install i get the following error:
    Fatal error during installation
    "sameer.el-khal" is not a valid short file name
    please go to http:// www.hp.com/support for troubleshooting information about "fatal error" and "MSI.netdevicemanager40"
    Everything craps out from there ...
    Got the same error running it general user and as administrator ...
    Please help.

    Hello @sqldraggon,
    Welcome to the HP Support Forums!  I see you are trying to install your HP Photosmart Premium C410 to your Computer running the Windows 7 Operating system.
    I would like you to start troubleshooting here: A 'Fatal Error' (MSI error) Displays on the Computer During HP Software Installation in Windows
    Please let me know the results, I will watch for your reply.
    Thanks,
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • How to print to my wireless all in one photosmart prem c410 when printer is not powered on?

    how to print to my wireless all in one  photosmart prem c410 when printer is not powered on?

    Hi,
    You cant print to a printer that you physicly turned off. Most network printer have a sleep mode, so leave it on and after a while it should go into a sleepmode. And should wake up when a printjob is being sent.
    Say "Thanks" by clicking the Kudos Star in the post that helped you.
    Although I work for HP my posts and replies are my own
    Please mark the post that solves your problem as "Accepted Solution"

  • Why is the scanner on my HP1CD560 HP Photosmart Prem C310 Series not being recognized?

    Why is the scanner on my HP1CD560 HP Photosmart Prem C310 Series not being recognized in my computer ?  I have the same printer/scanner/fax at work and I couldn't get it to scan either.  They just keep saying No scanners were detected. 
    And it tells me on the scanner to do it from the computer!!  Ugh!!!!!  I need it done yesterday!  This ePrint has been very disappointing.  Print quality is terrible, it always has errors when I try to print, and I continuously have to go to my so-called wireless printer and hit the home button to wake it up!  What good is having wireless if I have to go to it?  I might as well plug in!   Waste of money and can't afford to buy a different one   But any answers would be greatly appreciated.
    OS- Windows 7 64-bit 

    jewlz0001 wrote:
    Why is the scanner on my HP1CD560 HP Photosmart Prem C310 Series not being recognized in my computer ?  I have the same printer/scanner/fax at work and I couldn't get it to scan either.  They just keep saying No scanners were detected. 
    And it tells me on the scanner to do it from the computer!!  Ugh!!!!!  I need it done yesterday!  This ePrint has been very disappointing.  Print quality is terrible, it always has errors when I try to print, and I continuously have to go to my so-called wireless printer and hit the home button to wake it up!  What good is having wireless if I have to go to it?  I might as well plug in!   Waste of money and can't afford to buy a different one   But any answers would be greatly appreciated.
    OS- Windows 7 64-bit 

  • My Photosmart prem c310 won't print

    Hi, please can you help my Photosmart Prem 310 currently won't print, it's a wireless connection & the set up & configuration page shows all is good on my Mac & likewise on the HP set up.
    I have a MAC Computer (Mac OS X Lion 10.7.4 (11E53)
    I have tried deleting the printer & setting up from scratch but that doesn't seem to work either
    It has worked in the past but has never been100%, I used to keep holding the job then retrying & eventually it would work, but now nothing it's driving me mad please help.
    The error messages I keep getting are as follows;
    1. The printer may not exist or is unavailable at this time. 
    2. The printer is not responding.
    Kind Regards
    James
    [serial number removed for privacy]
    This question was solved.
    View Solution.

    Restart the router by pulling its power cord momentarily.
    Next, turn the printer off then back on again.
    Try it agan.
    If that does not work, make sure your Belkin router has the latest firmware.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • I have a 309g photosmart prem. I can not use the HP advanced Photo paper 10.5 mil Lb paper

    I have a 309g photosmart prem. I can not use the HP advanced photo paper 10.5mil Lb paper, when It feeds through it says mismatch. I have change the settings and everything, my same paper that is 4x6 works but not the 8x10?
    Help I want to print a 5x7 and the paper will not go through?

    In case you are not getting the option to select the paper from PSE, you can go to printer settings through the icon present in the print dialog box, there you can select the paper. The paper selected in the advanced options should be reflected in PSE as well.

  • HP Photosmart Prem C410 Unable to print - not able to connect wireless

    Initial setup of my HP Photosmart Prem c410 printer -- cannot connect to my wireless network. The password is good. There is no MAC address filtering on my wireless router. Help. ;-)
    This question was solved.
    View Solution.

    OK, I figured it was a DSL router, but wanted to be sure.
    DSL routers are rather non-standard, so we have to relieve them of some control during the printer installation:
    1. Unplug the phone line to the router.
    2. Restart the router by pulling its power plug out of the back momentarily, then plug back in.
    3. Wait for the router to restart.
    4. Install your printer, including software on your computer.
    5. When the printer is installed and working, plug the phone line back in the router.
    6. Restart the router again.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Photosmart Premium Web c309 n-s (Electronic Help)

    Photosmart Premium Web c309 n-s (Electronic Help) 
    Electronic Help is mentioned in the documentation  but I looked at the installed programs and nothing there
    also checked the cd that came with my printer  and no luck there
    also the software an drivers section for windows 7 64 bit   are not  showing  all the files for this printer
    can someone tell me what is Electronic Help anyway ?
    is it  something to install ?  or what  is it I need to look for ?
    thanks 

    It is saying offline and wrong usb and it is wireless? I don't know what to do. I have turned it off and on. Help!

  • For some unexplaine​d reason my Imac has Lost the wi-fi connection with my HP Photosmart Prem 310

    My Printer is an e-printer Photosmart Prem C310 Model CN503B.  I have recently had a new Imac and the Apple Store downloaded everything from my old Imac to the new one.   The printer worked Okay but last night I discovered that the time capsule had failed to action against the new Imac.  I input my WEP Key and it loaded okay.  Unfortunately my printer was unattached and I cannot get it back on line.  It asks me for a WPA key but I don't know where to find this out.  Please can anybody help me, I have a stack of printing to do and no means of dealing....

    It is in your Keychain.  Go to Applications > Utilities > Keychain Access.  Use the search field in the upper right of the Keychain window to search for your wireless network name.  When it finds it double click it.
    On the resulting window check the box next to "Show Password", it will ask for your Mac password, then it will reveal your WEP or WPA password (whatever you have).
    By the way, WEP is not in the least secure.  I recommend going to Applications > Utilities > Airport Utility and change to the WPA/WPA2 setting in the Wireless menu.  Choose a strong, 13+ character password and hit Apply.  Do this before you re-attach the printer to the wireless network or you will have to do it twice.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

Maybe you are looking for