HP Photosmart Printer connecting to Mac Book Pro

I have an ASUS RT-N66U router which is working fine between my iPad2; Mac Book Pro, however, I can not get my HP Photosmart wireless printer to connect. Any KISS step by step to get this fixed is greatly appreciated!

Next step is to make sure you are typing in the correct code and character set, Capitals, Upper Case letters, and the like.
Usually the newer routers have the WiFi password printed on a label someplace on the routers case. That is unless you changed it.
You can get the correct code from a PC running Windows 7 that is presently connecting to your Wifi. At the present I don't have a WiFi Win 7 PC at my disposal so I can't look up exactly where but it is in either Manage WiFi connection or in the properties of the WiFi card in that computer. There is a Check box to "Show Password".
Then again most of the newer routers also come with this WPS system, Wifi Protected Setup, and if you never disabled that on the router and typed in your own password you might try that if the printer is equiped with WPS.

Similar Messages

I'm trying to connect my mac book pro to my hp office jet 4500 with a usb and my mac and printer don't seem to be acknowledging the other

I cant seem to connect my mac book pro to my hp officejet using a usb cord the two don't seem to be acknowledging eachother and the printer never shows up in the quque

well i plug it into the computer and go to system preferences then to printers and scanners nothing shows up so i press the + in the lower left corner and their is never a printer available to add. i already updated everything like hp says to do bt i can't get it to work

How to connect my mac book pro to network printer Canon IR 2010f?

I'm desperate to know how to connect my Mac book Pro to network printer Canon IR 2010f. This printer has an independent system, therefore, no need a PC to be on, in order to print. But this printer is a network printer. Help me please.

The Canon UFR2 v2.20 driver for Mac OS X does not list the iR2010F as a supported model. The same is so for the Canon PS driver so I therefore believe this model is PCL5e only.
What you should do is open Safari and type the IP address of the iR2010F. This will connect to the internal web page of the copier and from the provided pages you should be able to see what printer languages are supported.
If it only lists PCL then you will be able to print to this copier using the Generic PCL driver included with 10.6.
So if you open Print & Fax, click + to add and then select IP > LPD for the protocol you can then enter the IP address of the iR2010F and leave the queue name blank. For the name you can change that to iR1020F and for the Print Using, select Generic PCL Laser Printer.
One note with regards to this driver. It is defaulted to 300dpi so you will need to open the print dialog when you do print and change the resolution to 600dpi to get better print quality.

Why can't I print from my Mac book Pro to my HP Deskjet 3054A. I am currently able to print wirelessly from my old PC desk top but not the laptop

Why can't I print from my Mac book Pro to my HP Deskjet 3054A. I am currently able to print wirelessly from my old PC desk top but not the laptop

I am running Mac OS X Lion 10.7.3. I believe I have the lastes drivers. I bought the laptop and got the printer free with it in December. I was initially able to print from the laptop but now says there is no connection.

How to connect my mac book pro with my TV?

I would like to know how do I connect my mac book pro to my TV, would like to watch film that I bought thru itunes onto my TV.
Thanks

You will need a mini displayport Thunderbolt to HDMI adapter and an HDMI cord.

How do I connect my Mac book pro to Apple TV wireless

I am not sure how to connect my Mac book pro to the tv with Apple TV wirelessly

You need to enable home sharing in iTunes on MBP and Apple TV. You will also choose which photos to share within iTunes.
Setting up Home Sharing for Apple TV (2nd generation and 3rd generation) - Apple Support
Any movies would need to be imported to iTunes or pointed to it if on external drive.
Back up your iTunes library by copying it to an external drive - Apple Support
The movies would also need to be compatible with Apple TV
H.264 video up to 1080p, 30 frames per second, High or Main Profile level 4.0 or lower, Baseline profile level 3.0 or lower with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats
MPEG-4 video up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats
Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format
They would then be accessed by going to the Computers icon on Apple TV.
Note: Computer needs to be on with iTunes running.

How do I connect my Mac Book Pro to a projector I have the adapter but cant get anything on the screen

How do I connect my Mac Book Pro to a projector I have the adapter but cant get anything on the screen

Go to your "screen settings". then chose "find screen" then you vill find the prosjector.
this will probably fix your problem.
if this dont works can it be something wrong with your adapter.
hope it helps

HT4356 Mavric doesn't support my 5 years old Big Screen Display, OR? Tried to connect my Mac Book Pro after installing Mavric, The Screen didn't work as before. I could only see the Desktop but not the movies for example. What can I do?

Mavric doesn't support my 5 years old Big Screen Display, OR? Tried to connect my Mac Book Pro after installing Mavric, The Screen didn't work as before. I could only see the Desktop but not the movies for example.
<E-mail Edited by Host>

It appears what happened is the installer though it was looking at a empty drive and just went ahead and installed.
I of course am assuming here you didn't use Disk Utility to format the drive first before installing, that would wipe out your files and programs for sure.
So what to do, what to do.
Well there is hope for you as long as the drive wasn't Filevaulted.
I'll explain. When a hard drive writes data for the first time to a drive, it starts at the very top and works it's way down.
When OS X was installed the first time, it was at the top of the drive, unless you upgraded then the upgraded OS X could have been written elsewhere.
Now when you just reinstalled OS X, the new OS went on the top of the drive, overwriting any data that was there previously, so what was there you have lost forever which is about 8GB or so. If it was the previous OS there, then your more in luck because only the old OS X was overwritten.
The remaining space on the drive still can have a copy of your files, provided it's not overwritten yet.
It's because when a hard drive deletes data or reformats, it doesn't remove the data off the drive or overwrites it immediately, it's just made so it's SPACE is available for new files to be written there.
So technically one can recover the deleted data off a non-encrypted/scrubbed hard drive with special software.
The way it does this is it reads the 1's and 0's of the files themselves, and through a lot of figuring out, can tell what that file is and what it belongs too.
So what you will have to do is this:
Create a data recovery/undelete external boot drive
or if you don't have the skills, then take it to a local PC/Mac tech and they can do a direct image of the drive and then you can run Data Rescue on it to rebuild your files.

We have a router at home supposed to support 10 devices but when i try to connect my mac book pro it says another device is using your computer's ip address

we have a router at home that is supposed to support 10 devices but when i try to connect my mac book pro it says another device is using my computer's ip address

Are the IP addresses statically assigned (wrong ), or does the router give them out using DHCP (right )?

Which cable do I need to connect my Mac Book Pro to my Panasonic PV-GS150 video camera for transferring video to iMovie?

which cable do I need to connect my Mac Book Pro to my Panasonic PV-GS150 video camera for transferring video to iMovie?

I totally understand.
Check some things from here, I have 2 and they have been great so far.
Check here, lots of storage and reasonable prices. Also great support, you get to speak to a person
Clean off your on the G5 drive and off you go.
I suggest buying a second drive and setting it up for a back up, Time Machine or Carbon Copy Cloner, or SuperDuper (both "bootable" back up) All searchable on the web.
http://eshop.macsales.com/search/elite+pro
You can talk to a person for REAL advice, Phone: 800.275.4576 Ask about exporting to your G5 and and exporting to your existing OSX, you may only need a small inexpensive drive for this.
Quick delivery and willing to help.
Hope this makes you back up and running :-)
Do get a back up drive, as it is not ""whether my drive will fail, as much as "when my drive fails"
All the best

I want to connect my Mac Book Pro to the internet in France without any wifi connection available? Mi Fi? Sim card?

I want to connect my Mac Book Pro to the internet in France without any wifi connection available? Mi Fi? Sim card? All we have is a phone signal in this rural French location. I want to be able to Skype to states from there. We have a friend with a 3G ipad who uses an Orange sim card to do it. I would rather not have to buy an Ipad.
thanks

I found out that the data package for one month useage with MiFi is 1G. How many minutes of online time does that correspond to?

I would like to connect my Mac Book Pro 13 Mid 2012 to an HD TV

What adapter do I need to purchase in order to connect my Mac Book Pro 13 Mid 2012 to an HD TV?

mini-displayport to HDMI

I have just tried to connect my Mac book pro to an LG Plasma TV via an iWires Mini DisplayPort to HDMI cable. All I get on my TV is the Mac wallpaper and nothing else. I am missing something really silly, could anyone help please.

I have just tried to connect my Mac book pro to an LG Plasma TV via an iWires Mini DisplayPort to HDMI cable. All I get on my TV is the Mac wallpaper and nothing else. I am missing something really silly, could anyone help please.

Hi there. I also bought an iWires mini Display port to HDMI cable and have an LG LED/LCD TV. I plugged it in to my MB Pro and followed the very small writing that came in the package and got both audio and video going. You need to change the audio settings from within System Preferences on your Mac to select your TV as the audio output.
My concern is the data latency - do you experience a delay between moving your mouse on the MBPro and the TV displaying the movement? It is only a fraction of a second, but certainly enough to be annoying, especially in a cable as expensive as the iWire.

Hi, i tried to connect my mac book pro on my tv. I can't clci kon mirror displays

Hi, i tried to connect my mac book pro on my tv with my hdmi cable but when i click on displays, "arrangement" doesn't appear . Even if i click on detect displays, it doesn't work. Mirror displays doesn't appear on my screen. Does anybody get any idea ?
Thanks a lot for your help
Victoria

Hello Victoria,
It sounds like you are connecting your MacBook Pro with your television, but you are not getting additional options for your external display.
I found an article with steps to troubleshoot issues with displays. This article is for internal and external displays, so you can skip any steps referring to the internal display. I recommend reviewing the section titled "No video or no signal, image distortion, 'snow,' or flickering" in the following article:
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/ht1573
Thank you for posting in the Apple Support Communities.
Best,
Sheila M.

I bought a mini DVI to HDMI convertor and a HDMI to VGA cable to connect my mac book pro to a tv but it doesn't work any one can help.\\\\\

i bought a mini DVI to HDMI convertor and a HDMI to VGA cable to connect my mac book pro to a tv but it doesn't work any one can help.

I would suggest looking into a Thunderbolt to HDMI connector. In this case, you may be able to use the TV as an external monitor. For this option, please confirm through additional research. I have not tested it personally.
You can also use an Apple TV, which connects with HDMI. In this case, you can use Airplay Mirroring. Not all Macs support Airplay Mirroring, so you need to check first. I have a Mid-2011 27" iMac, and it supports Airplay Mirroring. I don't use it often because my TV is in another room, but I just tried it and it worked. It had to change the screen resolution to work well, so I don't know if I would want to use it as my day to day monitor. http://support.apple.com/kb/ht5404

HP Photosmart Printer connecting to Mac Book Pro

Similar Messages

Maybe you are looking for