HP PhotoSmart PSC All-in-one 2410 driver not found

HP claims to have and distributes a mac osx 10.4 driver for the 2410. I DL it, installed it but unfortunately the install process ends by looking for a 2410 on the network, not on my USB connection. After quitting the process, there is absolutely no driver available during Tiger "install a new printer". The GIMP and HPijs did installed drivers but none seems to be compatible with the 2410.
Anyone found a Tiger compatible driver for this All-In-One HP 2410?

Hello All,
I have an HP PSC 2410 printer. I used the original install disk, which came with the printer and it works fine. All functions (ie. printing, scanning, faxing, etc.) work. I did have an issue of not being able to print after upgrading to Mac OS X 10.4.4. However, after manually uninstalling all the HP software (following instructions I located on HP's web site), reinstalling and then rebooting the computer, all functions of the 2410 work.
I originally purchased the printer in 2003. So the software drivers are from that time frame. I did download the latest version of "HP Zone" and installed it as well. Again, all software works with Mac OS 10.4.4.
Martin C. Meadows
Power Mac Dual G5 2.3 GHz Mac OS X (10.4.4) 1.5 GB RAM

Similar Messages

Error message on my HP Photosmart C7280 All-in-One 'Wireless Radio not Working'

error message on my HP Photosmart C7280 All-in-One 'Wireless Radio not Working' My broadband is BT Infinity with a very strong signal throughout the house and my operating system is Windows XP. My printer will not connect wirelessly to my network, what can I do with respect to the error message 'Wireless Radio not Working'

Hello @GeoffH777 ,
Perfect! You are very welcome, I am very happy to hear the reset helped!
If you have a quick moment, please scroll back to my last message here and click the "Accepted Solution" button, so others can find our thread if they happen to run into the same issue.
Greatly appreciated, have a wonderful day!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

HP Photosmart C3180 All-in-One printer -- SCANNER not working.

I have had this HP Photosmart C3180 All-in-One printer for a couple years and all is well. HOWEVER, the one function not working properly is SCANNING. I can print fine and copy fine. But when I go to scan something my power button flashes for about 10 seconds and then stops. Nothing happens, and nothing scans. HP said it was not the printer itself, but something to do with my operating system through Apple. I have the current 10.5.6 version of Leopard.
If I can get any help from others I'd appreciate it!

HP provided this link to software which resolved my scanning issue.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-55009-3 &lc=en&dlc=en&cc=us&lang=en&os=219&product=1146331

Photosmart 3210 All-in-One printer will not read Micro SDHC memory card. Help!

I have a Photosmart 3210 All-in-One printer that will not read my Micro SDHC memory card. Help! I get an memory card error message but no idea where to go from there.

Hello
I understand the printer can't read the memory card.
This is a url for the printer specifications and include the memory card types supported.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00408357&tmp_task=prodinfoCategory&cc=us&dlc=en...
Here is a url for troubleshooting memory cards.
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c00059994
If you need more assistance just let me know.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP Deskjet F2120 all in one printer driver not installing after upgrading to Windows 7

I have a HP Deskjet F2120 all in one printer. I was working fine in Windows Vista Home Premium 32 bit.
Once I upgraded to Windows 7 Home Premium 32 bit the driver is failing to install.
I have tried all the solutions provided on the HP website but none of them worked.
I also wrote a mail to HP support but they replied that its out of warranty hence they will not be able to help.
If some genius can help me I will pray for him/her that all his/her wishes come true.
Thanks you in advance.
Imroz Baig

I just got my HP Deskjet F2120 working in Windows 7. Here's how:
Insert the setup disk in your CD/DVD drive. Choose to view the files in Explorer. Scroll down to the file "Setup," which is identified as an application.
Right-click the file and select "Properties." Click the "Compatibility" tab at the top of the resulting window.
Check off "Run this program in compatability mode for:" and choose "Windows Vista" from the pop-up menu.
ALSO check "Run this program as administrator" at the bottom of the window.
Press "Apply," then "OK."
Now you can double-click the "Setup" file and run the software installer.
It will 100% work inshallah...

HP Photosmart C6180 All-in-One printer will not work

Printer worked one day and the next day it did not and now will not turn on. I did not turn it off. It went off all by itself. Only 3 years old and not over used. Have checked outlet and power cable. Green LED light comes on when connected to outlet but as soon as I connect it to the printer, the light goes out and the printer will not turn on. Is it dead?

I have the exact same problem
Where do we find a solution

Photosmart C6280 All-in-One Printer Will not acquire IP Address

I have happily had a Photosmart C6280 for some time now, however I recently replaced my router and my ISP Cable Modem (NetGear WNDR 3700 and Cisco 2100 respectively). At first everything was wonderful. Sadly, my NetGear router went bad and I had to return it. As it stands right now my printer will not take an IP address from the router. I have tried everything I can think of, several times and nothing has changed. I have uninstalled and reinstalled the software on the Windows 7 and XP machines that I'm using. I have tried to manually set an IP address but on my printer when I'm done inputting all of the information there is no "enter" option. Looking at the Connectivity Status page it states : Network Interface Adaptor Summary
Name                                              Type                                                 Status
Eth0                                                 Wired(802.3)                                 Disconnected
IP Status
Name                                             Type                                                 Addr.    Source
Eth0                                               Wired (802.3)                                  Disconnected
Note: Automatic or manual IP address assignment only occurs for an adaptor if it is currently connected.
Wired (802.3) Adapter Information Detail
     Configuration
Enabled at power on:    yes                                                                                            Link Config: Auto Link Speed
Auto Crossover: On                                                                                                         Auto of Manual IP Address : Manual
Manual IP Addressees: 192.168.1.12                                                                            Manual Subnet Mask: 255.255.0
Manual Default Gateway: 192.168.x.x                                                                         Auto or Manual DNS Server: Manual
Manual Primary DNS Server: none                                                                                 Manual Secondary DNS Server: none
---------Status---------------------------------------------------------------------------------------------------------
Adaptor Name: Eth0                                                                                                         Adaptor State : Inactive
Adaptor Connection Active: False                                                                                 Adaptor MAC Address: 00:21:xx:xx:xx:xx
Link Status: Disconnected
I have tried two different print servers and nothing. I am at the end of my rope and any help will be greatly appreciated.
                                                                                                                           Thank You
                                                                                                                             -ndrdog

On the front of the printer: Setup > Network > Reset Network Defaults.
Now, set a static IP address for the printer:
- Print a Network Config Page from the front of the printer. Note the printer's IP address.
- Type that IP address into a browser to reveal the printer's internal settings.
- Choose the Networking tab, then Wired along the left side, then the IPv4 tab.
- On this screen you want to set a Manual IP. You need to set an IP address outside the range that the router automatically sets (called the DHCP range). If you know what that is, set an IP outside that range but no higher than 254 (the last number in the address). If you do not know this, enter the current IP address.
- Use 255.255.255.0 for the subnet (unless you know it is different, if so, use that)
- Leave the gateway and DNS blank. Click 'Apply'
Now, shut down the router and printer, start the router, wait, then start the printer.
After this you may need to redo 'Add a Printer' using the new IP address.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

HP Photosmart C6300 All in one series is not printing

I have replaced all cartridges, and gone through the troubleshooting program for Ink System Failure with no success.
I have the HP Photosmart 6300 printer. I need your help.
Loreen Brigham

Hello Loreen,
Can you try printing a testpage by pressing Setup»Tools»Printer Status Report. Please scan this page and add it to your post by clicking the insert/edit picture button, so that i can have a look at it.
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Although I work for HP my posts and replies are my own
Please mark the post that solves your problem as "Accepted Solution"

Hp photosmart 3210 all-in-one - some colors not printing even after changing cartridges.

I recently had an issue while printing a document. the content was off colored and the error message said black was low. Changed the black cartridge and things just got worse from there. Still no black, cleaned the printheads, printed another test page and no longer had magenta or lt magenta. Replaced those as well. the only had yellow, magenta and lt. magenta. yellow was low as well, so now every cartridge has been changes.Tried to print document again and it printed in magenta and lt magenta. never have seen black again and the self test diagnostic page is printing in purple. What should be black showed up as purple with lines and yellow is a rainbow of mustard, magentas and purples. no other colors show up. WHAT IS GOING ON? have tried several times to align the printer but it always fails. Have cleaned the printheads several time and just get a mish-mash of colors (no black) and most of the time no writing. When I try to print in black only, I get nothing.
What can I do? It worked just fine prior to ink going out.

Did you get a resolution to your problem? The same has occured for me - only printing blues/yellows and greens. Was working fine until I replace the yellow cartridge and then it stopped printing reds.

Photosmart 6520 all in one not printing

Hello,
My HP Photosmart 6520 all in one printer will not print anything in black and it has a brand new cartrige in it. I have tried restarting the printer, and the computer and it is not helping. Please help.

Hi Roselilith823,
I came across your post and was wondering, was the issue you were experiencing resolved?
Roselilith823 wrote:
Hello,
My HP Photosmart 6520 all in one printer will not print anything in black and it has a brand new cartridge in it. I have tried restarting the printer, and the computer and it is not helping. Please help.
If you are still having difficulty, please call Phone support regardless of your printers warranty status. The number to call HP is 1-800-474-6836 for Canada and US, or you can Contact HP Worldwide.
Please let me know the outcome, and/or if the issue had already been resolved. Thanks.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Photosmart C5150 All-in-One

I have an HP Photosmart C5150 All-in-One printer. Not to long ago I purchased a new set of ink cartridges. Once I put them in it seems as though the printer did not recognize that they were new full cartridges. When I try to print my computer tells me that I need to replace some cartridges however once printing starts and the ink gauge pops up in a window it tells me that all cartridges are full. Now when I check the gauge on the actual printer it is not recognizing my black ink cartridge as well as a few others. I am a student and therefore need to use my printer for quite a few things. How do I get my printer to recognize my cartridges and start printing normally?

Hi jmontro96,
Here the weblink to dopwnlaod the software that is compatible with vista operating system,
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadInst?swfsequence=1&lc=en&dlc=en&cc=us&softwareite...
If you have already tried downloading this one, please let me know what is the error you aree getting so that I can provide you the resolution for that error.
Manjunath
Life is colorless

HP-photosmart 6280 all-in-one with osx 10.9 now does not show options for printing photos from the photo tray.

Using osx mavericks on macbook pro. My printer for HP-photosmart 6280 all-in-one now does not show options for printing photos from the photo tray.

What router? Have you restarted the router?
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

HP Photosmart e-All-In-One C310a not printing black ink?

HP Photosmart e-All-In-One C310a will not print black ink. I've installed new genuine HP cartridges (original cartridges were also genuine HP). I've run through all troubleshooting processes, test pages, clean heads, alignment procedures, and other suggested forum fixes such as "removing all cartridges, powering down, removing power cord, reinsert power cord, power up and reinstall cartrdges" which seemed to work for some other HP customer, but not me. Any ideas? Or am I fortunate enough to have a DUD?
Please help....

Hope you a having a great day,
I am reaching out to probe if you still experience this issue. If you are, take the time to try this I might help,http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02187415&cc=us&dlc=en&lc=en&product=4231205&tmp...
I will do my best to assist you. If you are not experiencing this issue any longer you may disregard this post, although I will appreciate if you can take I little bit of your time and let me know.
Thanks
RobertoR
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

Looking for basic driver for psc all in one 2175 for XP 32 bit. Thank you

looking for basic driver for psc all in one 2175 for XP 32 bit. Thank you Dont need all the photo suite stuff,just basic scan and print.
Thanks

Hi @RUkiddingme
You can download the full feature software and driver, and only install the basic driver. In the installation you should see the option for custom software. Here is the link to download the software; rw2_021_w02_enu.exe
Please let me know if this resolves the issue.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

HP PhotoSmart 2575 All-In-One Driver/Software Install Issue - Windows 8.1

Hi
I've just bought a new Sony Viao with Windows 8.1 (64 bit) installed.
I'm trying to install my HP PhotoSmart 2575 All-In-One so downloaded the driver and software installer from here:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-110159-1&cc=uk&dlc=en&lc=en...
The file downloaded fine on to my desktop, i double click it and then the Exctracting... thing moves along to 100% then goes off the screen. Then nothing happens. I was expecting some software for the printing and scanning to be installed or some further install files to be added to my desktop.
What do i do next?
Matt

Hi Matt,
Thank you for updating me. I can definitely understand the frustration you must be feeling, especially when things seemed to be going great then it changed.
I have 2 documents to follow next. First, please try the steps in the document titled "Software Installation Stops Without Warning and With No Error Message". When you get to "Step three: Install the Software", it references HP SmartInstall. Please don't worry about using that program as it's specific to some of HP's LaserJet printers. Please use the HP's Printer Install Wizard instead of HP's SmartInstall.
If that document doesn't resolve the issue then please proceed onto the 2nd document titled "The Progress Bar on the Software Installation Stops or Stalls".
Please let me know how it goes. I want to ensure we have your printer installed and working.
Software Installation Stops Without Warning and With No Error Message
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c02018709
The Progress Bar on the Software Installation Stops or Stalls
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c00836418
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

HP PhotoSmart PSC All-in-one 2410 driver not found

Similar Messages

Maybe you are looking for