HP Photosmart7520eprinter ALL-IN-ONE 8 64-bit (wireless said offline) Using Router

Wireless will not stay online. So I go thru the motion to scan or to print pictures

Hi,
Please use the following tips/instructions to fix:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02221706&cc=us&lc=en&dlc=en
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

I have a HP 3055 all in one attached to a wireless print server. I got in working on one laptop Win7

I have a HPa 3055 all in one attached to a wireless print server that works with one Dell laptop that I upgraded from XP. But I can't get a New Toshiba Win7 to work wireless, but only with cable.

Do you have a wireless router? How is the print server configured with that?
On the Win7 machine, download and run this utility: http://h20180.www2.hp.com/apps/Nav?h_pagetype=s-926&h_lang=en&h_client=s-h-e17-1&h_keyword=dg-NDU&ju...
What does it say?
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

HP F380 All in one printer 64 bit driver fails to install

I have a HP F380 All in one printer. I donwloaded the driver for Windows 7 (64 bit). The installation program abbruptly dies with an error
Please advise how I should proceed now.

Hello shrijoshi,
I see that you're getting a runtime error when you are trying to install the HP Deskjet F380 on your Windows 7 (64 bit) machine. Please follow the steps listed below:
Hold down the Windows Logo key ( ) on the keyboard and the 'R' to open the run box, type %temp%
Look for, and open the folder starting with 7z (Example: 7zS2356)
Open folder Util
Open folder CCC
If you have an HP computer run the L3uninstall.exe . If you have a non-HP computer run the L4uninstall.exe
When the uninstall has completed restart the computer
Follow these steps to reset the registry settings and options for Windows Installer.
Click Start , and then click Run .
In the Open box, type msiexec /unreg, and then click OK .
Click Start , and then click Run .
In the Open box, type msiexec /regserver, and then click OK
Run Disk cleanup from Accessories\ System Tools
Download and install the latest version of Adobe flash player http://www.adobe.com/support/flashplayer/downloads .html
Now we can restart the computer
I would now like you to install the software using the HP Printer Install Wizard it was created to help Windows 7, Windows 8, and Windows 8.1 users download and install the latest and most appropriate HP software solution for their HP Printer
Your HP F380 should now be successfully installed, if you run into any problems please let me know.
Thank you,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

HP all in one ms237 cant get wireless drivers to work

Hi i have a HP all in one PC, ive had this PC for a very long time, we upgraded to windows 8 and i dont remember how but i did manage to get wireless drivers on it at one point. the PC's hard drive went out and so i bought a new one and re-installed windows 8 (64 bit) onto it and now i cant get wireless drivers to get installed on it. I tried running the drivers with windows 7 compatability but no dice. I also tried different versions of the driver and still no luck, device manager will see the wireless card but says its not working properly (driver issue) the weird thing is that when i uninstall the drivers for it i can see the adapter in adpater settings, however when i install newer drivers and it goes back to being non existent lol. Any ideas?

Hello @rapid3642,
I understand that you are having issues getting your wireless to work on your HP Pavilion All-in-One MS237 Desktop PC running Windows 8. As you probably have already figured out there are no Windows 8 drivers for your computer. I can see why you would have issues installing Windows 7 drivers on a Windows 8 computer. What you probably did initially was upgrade your Windows 7 to Windows 8 with the driver already installed. Unlike a new Windows 8 installation where you need to install the drivers an upgrade will already have drivers installed and the operating system is simply replacing what is needed without having to go through the installation process.
I would recommend that you either install your original Windows 7 and then upgrade to Windows 8 or you may want to look at replacing the 802.11 b/g/n PCI express wireless half-length mini card with one that is compatible with Windows 8.
I hope this helps. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

I have an HP Photosmart C7250 All-in-one - Test Report - The wireless radio is not functioning

I have an HP Photosmart C7250 All-in-one and the wireless feature does not work. When I try to go through the Wireless Setup WIzard, the Test Report indicates the following - "The wireless radio is not functioning. Contact HP Support". Can you help me?

Let's reset the printer. Turn it off, hold the # and 6 keys while turning it back on. Go to Setup > Network > Wireless Network Test afterward to see if it worked.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

HP all in one C309a: Error message: Wireless Radio is not functioning. Contact HP support

Today all of a sudden, a 2 year old HP Photosmart C309a All-in-One printer is not longer connecting to my local Wireless Home Network. There is no change to network configuration to the TLink 3000 hub that I was using. All other clients (Mac OX, Vista, Ubunta 11.1, various versions of iOS and Android Icecream Sandwich) have no problem connecting to the same hub. No change to the network configure on the Printer. The machine have been standing as a stand alone machine and connected wirelessly to the network since day one in the corner of my office. Its within range of my router. I ran Wireless Network Test report to see what's going on. The title says "The Wireless Radio is not functioning. Contact HP Support" . Any number of reboot cycle didn't help. Out of frustration, I press "reset back to Factory Setting" on the printer. I did that, and then press "Wireless Network Wizard", and it was on "Searching for Wireless Router" forever... What opinions do I have? Get a new printer? or use good old 10-base T network cable to hook up the machine?

My HP C309a had exactly the same problem. Everything I found on the internet said that the printer could not be fixed and the only solution was to buy a new printer. The printer report said the wireless radio was not functioning. A factory reset did not fix the problem either. I had a problem with my HP Pavilion dv6000 laptop with the video graphics IC. The solution for that fix was to do a solder reflow of the graphics IC. Did it and fixed the problem. I figured maybe the same fix would work on my printer as I didn't have anything to lose at this point. I located and removed the wireless radio board in the printer (on the left side upper right corner). I then did a solder reflow on BOTH sides of the board. I put the board back into the printer and wa-la, it connected immediately to the network. It has been functioning with no problems now for at least four weeks now (knock on wood). Hope this helps.

HP Officejet 4620 All-in-One Loses Connection to Wireless Network When It Goes Into Sleep Mode

My HP 4620 All-In-One wireless printer works fine until it goes into sleep mode. Once it goes into sleep mode, it doesn't wake up if a print job is sent to it. If I wake it up manually by pressing the blinking on/off button, it still doesn't print. If I completely turn it off and then on again, the print job that was queued on my computer will start printing, but that's a huge pain and waste of time nearly every time I want to print. I've installed all available updates. I also assigned a static IP address in an effort to correct this but nothing helps. I see that others have complained about this problem, but I do not see that anyone has had success resolving this. My operating system is Windows Vista. I use a Link-Sys Wireless G Router. Thanks.
This question was solved.
View Solution.

so I have called HP tech support 12 times over the last 6 weeks and still my HP Officejet 4620 loses connection overnight. Of course becasue it was a birthday present I spent more time than I normally would have on this issue. While the tech are very polite they have not fixed my problem and now it is too late to return printer to store. This is a lot of money wasted and I think they need to admit this is a bug in this printer and resolve the problem!!!!!

How do you set up airport extreme with a windstream all in one modem with the wireless router built in

I have a wireless network that I want to extend so there will be wifi coverage all over the whole house. I want to use the airport extreme to do so. so far all i can get to work is the airport making another network via a eithernet cable that is pluged into one of the ports on the windstream wireless router/moden (all in one you plug the phone line into this and it has the wireless built in) and the other end is in the WAN port of the airport. I guess the real question is do I need to change any settings on the windstream wireless router/modem to do so. Every time I select all the options to extend a network wirelessly I keep getting errors.

The Airport Extreme can not wirelessly extend a 3rd party router, it can only extend another Apple router. If you can somehow keep the two connected via ethernet, you can setup a roaming network. A roaming network is essentially "extending" your network by using an ethernet cable to bridge the two routers.

I got my first Mac 2 weeks ago, a Macbook Pro. I can't get it to scan on my HP Laserjet1217 nfwMFP all in one. It prints (wirelessly) just fine. But when I try to scan, it says something like "no scanners available". Wireless or connected, it's the same.

I have not been able to get my new Macbook Pro to scan, either wirelessly or connected, with my HP Laserjet all in one M1217 nfwMFP printer. It prints wirelessly just fine, but if I try to scan, I get the message that no scanners are found. The guy in the Apple store had it scanning just fine with a new HP printer he took out of the box. Any ideas would be appreciated.
Allan 113

I would check with HP. Your scanner may need a firmware update and updated HP software. Start here:
http://www8.hp.com/us/en/hp-search/search-results.html?qt=LaserJet+m1217nfw+MFP& cc=us&lang=en&charset=utf-8&qp=&hpn=&hpa=&hps=&hpr=&cat=&current_url=CSSres
then here:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=219&lc=en&cc=us&dlc=en&sw _lang=&product=4075472

My hp all in one printer will not link to my new router.

I have a hp all in one printer deskjet 3510 model and i just got a new belkin N600 router and they will not link for wireless printing. The printer just times out when I try to get them to link. I use the push button setup because thats what i have. How can i get them to link. I had no problem with my old router it was a linksys.

Replacing your wireless router try here.
http://www.hp.com/global/au/en/wireless/reconfiguring-system-help3.html
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Have hp psc 1510xi all in one, i wan to know how to use this printer as fax

Hi, I am new to this forum, i want to know how can i use this printer as fax. this is psc 1510xi all in one.
Thanks
Nat

hi there,
could you provide the community with a little more information to help narrow troubleshooting? What operating system are you using?
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

HP 7525 e-all in one unable to see wireless network

I just purchased the HP 7525 and it does not see my wireless network. I have a Cisco E3000. I have been through some other posts to make sure I have settings that are compatible.
I am set to mixed mode (wireless B/G/N) although I have also tried just straight B. I am broadcasting my SSID. My security is WPA2 personal (although I have also tried turning it off with no luck). I do not use any MACaddress filtering.
All other wireless devices (phones, tablets, laptops) I own have no problem detecting the network.

According to this post it does support WPA2.
http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/WPA2-and-7250c/td-p/3328953
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

8500a all in one, and macbook pro wirelessly connected. Broken pipe ????

i have an all in one 8500a and a mac pro wirelessly connected. It has been fine for 7 months. Now I am getting a message that says broken pipe, what do I do? I have no idea what a pipe is.

Hi,
Try resetting the Printing System, then reconfigure the device:
*Be aware that resetting the printer system will remove any existing print queue and reset any customized driver settings.
Click the Apple menu, and then click System Preferences .
Select Print & Fax.
Right-click (or Ctrl + click) your product in the Printers list in the left panel, and then click Reset printing system .
Click OK to confirm the reset.
Type your user Name and Password .
Click OK . The printing system resets.
Now reconfigure the device by following the HP Setup Assistant, located under Applications > Hewlett Packard > Device Utilities.
Now check if the problem been sorted.
If the issue remains with no change, completely remove any installed HP Software by using Scrubber:
**Please be aware that performing the next steps will remove any installed HP Software.
1. Click on Go menu (Click the desktop, then look at the menu in the bar at the top of the page)
2. Select Applications
3. Select the Hewlett-Packard folder
4. Double-click HP Uninstaller application
5. Follow the uninstallation till prompted to select a device to uninstall
6. Press and hold Control + Alt + Cmd keys on the keyboard simultaneously while you click on Uninstall
7. approve any prompt to uninstall any HP Software.
Repair the Mac OS Disc Permissions:
1. Open the the Applications folder.
2. Go to the Utilities folder.
3. Double-click on Disk Utility.
4. Select the hard drive containing the boot volume.
5. Go to the First Aid tab and select Repair Disk Permissions.
Note: This process may take several minutes depending on the Mac and amount of permissions that need to be repaired. The Progress Log will indicate when the proccess has been completed.
Download and install the latest software below:
Mac OS X v10.5 (Leopard) or v10.6 (Snow Leopard):
http://ftp.hp.com/pub/softlib/software11/COL34340/mp-85024-2/OJ_AIO_08_8500_A910_Net_Full_Mac_WW_74....
Mac OS X v10.7 (Lion):
http://ftp.hp.com/pub/softlib/software12/COL40169/bi-97933-2/HP_Lion_Ink_SW_v12-1.13.22.dmg
Finally make sure to install any available HP by clicking the Apple icon and then Software Update.
Please let us know of any further issue,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

New computer with windows 8. hp officejet 5610 all-in-one scanner worked but is now offline.

I have a new dell computer with windows 8. the hp officejet 5610 all-in-one seemed to be fine, and I could scan and print. Now I can no longer scan. charms - settings - change Pc Settings - devices shows HP Office Jet 5600 offline!
There may have been a request to update some software which I may have allowed. Maybe this is my problem? How do I fix this?
thank you
This question was solved.
View Solution.

Hi,
Please download Full Feature Softeware and Drivers from the following link and install on your Dell:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4132&lc=en&cc=au&dlc=en&sw_lang=&product=4411...
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Deskjet F4500 all in one can't comminicate wirelessly.

I have an HP Deskjet F4500 all in one wireless printer that I have tried to install on my home network. I used the CD that came with it to install and the computer tells me that it has installed properly. However when sending a document to print, although the small window tells me that the document is printing and then that window goes away, a few minutes later another window appears and tells me that the document failed to print. Some times it tells me that the cartridges need alignment so i go through the procedure and nothing happens; at other times it tells me that there is no communication between the computer and the printer, stil some other tomes it tell me that the printer is offline.
I know the printer is on line by using my NirSoft Wireless Network watcher which lists the computer and the printer and the other computers on the network.
I did uninstall printer using Revo Uninstaller rebooted and then installed the printer again. Checked for software updates from HP. Used the HP Installation Failure guide from HP. Checked the IP address of the printer through the Browser on the computer and it opened the connection with the printer and its properties verifiedthe key on the Security (WPA2) on the router which is a Wireless Broadband Router, verified the MAC address in the MAC filter feature. The printer still does not respond to the printing command same messages back. Computer running Win XP Pro SP3 with all its updates. AMD 64 Processor. 2GB RAM. Any suggestions will be greatly appreciated to solve this problem.
Sadnewbie

OK, now insert the printer CD and run the installer, selecting "Network" installation when it asks. Make sure to NOT have the USB cable installed between your printer and PC when you start the installation. It will ask you to temporarily install the USB cable during the installation.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

HP Photosmart7520eprinter ALL-IN-ONE 8 64-bit (wireless said offline) Using Router

Similar Messages

Maybe you are looking for