HP Photsmart 3210 All in One printers issues after reinstalling software/ Vista 32 bit

Help please! After troubleshooting and no results, I did the uninstall and reinstall, however, when I plugged in the USB cable, it didn't recognize that I had plugged it in, so I used another cable and still nothing. One of the error messages I did receive said, Cannot complete installation without Registry keys and to the left of the box were:
slbcsp.dll
sccbase.dll
gpkcsp.dll
Enum
I have no idea what to do, also My HP Print Diagnostic Program which I have used frequently no longer lists my printer. As far as I can tell the printer is installed or at least up to the point where I finished installation without the USB. The Icon for HP Solution Center is still on my desktop but when I try to open it it says, " No HP devices have been detected, HP Solution Center will now close. But HP Photosmart Essential 3.5 can open and operate. The icon in the lower right hand of the screen for the HP Digital Imaging Monitor is present so I don't know what I need to do. I can print a test page directly from the printer screen but cannot scan, it says No Scan Options, refer to device documentation to troubleshoot.
As you can see, I think I have tried and utilized every possible solution to troubleshoot what is wrong and cannot figure it out.
I'm not exactly Ms Computer but can follow simple instructions if someone could help me, could the USB port on the printer have died?
Thank you for your help, I hope I have given the correct information to help sove this problem while I still have hair left.....
JKM

Many thanks for your reply. I did try all of your suggested solutions and I am afraid none woked for more than an hour or two and then I had the error printing message back again. I suspect it may be a problem with by BT Router and despite hours of calls with them, we have got no further, but they have despatched a new router to see if that might be the cause. When printing works (sometimes it doesn't for days - until today i had been nearly a week without any printing and last night I went out and bout a PC to HP pronter cable in desperation. That does work Ok, but is a temporary work around as it cannot be used by more than one PC at a time. Today, with the BT engineer on the phone, we tried everything we could think of, including static IP addressing, and nothing would work. After we finished, I deleted the printer from the network and re-installed it again and both cabled and wireless connection to the router started working again. However, this has happened sometimes before and then stops again later. I have deleted and re-installed HP drivers so many times over the last 8 weeks, I have lost track of the number of times, changed router configurations, but the same problem either re-occurs or doen't work at all. The HP Printer can see the Router name and its IP Address, even when the Error Printing message appears on my laptop, but when that occuts, the PC cannot see the HP Printer via the Router. This is why I have been thinking the Router might be causing the fault. If you have any thoughts on this, I would be most grateful for any advice, But at the moment, my hopes are that a new Router, which is due to arrive next Monday or Tuesday, may help !!!! Thanks again. Colin Faragher

Similar Messages

HP Officejet Pro 8500 all-in-one printer - issues after upgrading to Windows 8.1

After successfully downloading a driver from the HP website to enable using this all-in-one printer with a new HP laptop using a Windows 8.1 OS, I confirmed that the printing function works normally (just as it did with a Windows XP OS on my wireless home network).
However, I don't find any icons appearing on the 8.1 desktop for other HP apps (e.g. HP Solution Center, HP Photo Creations). I do have an icon for the Printer. When opened, it shows two options: 1) add a new printer and 2) add new software (from the original CD). But the original CD is for the XP OS, which I don't try and possibly mess up what already is working.
So-o-o, Is there any HP software download available for HP apps to use with this printer, especially HP Solutions Center?

Hi Riley.
You can get HP Photo Creations here:
www.hp.com/go/hppc
It's a free download for Mac and Windows.
Hope this helps,
RocketLife
RocketLife, developer of HP Photo Creations
» Visit the HP Photo Creations Facebook page — news, tips, and inspiration
» See the HP Photo Creations video tours — cool tips in under 2 minutes
» Contact Customer Support — get answers from the experts

HT1338 How do I get the Lion update for the HP Photosmart 3210 All in One Printer? The auto software update says none are available, while HP says one is available.

I just installed LION and no Power PC Apps work.
HP says there are updates for Lion from MAC APP store for the HP 3210 PhotoSmart All in Printer and provided instructions.
I followed these but no updates were visible or installed. Any idea why?
Is there a place where I can look at Apple for an update?
If no update is available, can anyone recommend a good flatbed scanner for under $400 that works with Lion?

Hi,
The drivers do available from Apple and your Mac may fails from getting them due to any connectivity or installed software issue.
First make sure you don't have any previous OS drivers installed:
Open Finder, then click Go > Computer and select the active volume of your OS.
(If have couple and not sure which one is correct, click the Apple icon > About This Mac.)
Open Library\Printers and move the HP folder to the trash.
Enter into PPDs\Contents\Resources, search for 3200 in that folder and move the results files.
Reboot your Mac, ensure the printer is turned on, in Ready state and directly connected to your Mac.
Enter Print & Scan, click the Plus sign and you shoud see your printer listed.. select it and click Install.
If no printers appears at all there is a connectivity issue.. ensure it is directly connected and not through any USB hub or adaptor, the cable is not longer than 2m length.. otherwise try a new USB cable.
If the printer appears but stil cannot locate drivers for yoru printer download and install the package below and then try adding the printer again:
http://support.apple.com/kb/DL907
Shlomi

HP 3210 All-in-One Printer and Vista

Having trouble with HP 3210 All-in-One Printer/Scanner. Purchased printer late 2006. Upgraded to Vista in February 2008. All functions of the Printer/Scanner have been working just fine with Vista until this month. Error message says 'Unable to Scan or Copy'. Scanned from computer on 12/01/2008 and a week later the error message appeared. Print function from the computer works fine. Buttons on front of the printer for both scan and copy will not work and scanning from the computer will not work. Have tried suggestions from different websites to work-around using a program like Microsoft's Paint but still nothing. Any suggestions will be welcomed.

Resizing and cropping are not the same process.
Image>resize>image size brings up a dialog where you can resize, and if the image is resampled, distortion may ensue.
The crop tool is said, by some, to resample as well, although in many instances minor distortion is not noticed by the uninitiated..
The preferred way (for me) to crop is Image>crop.
If you have a 4x6" picture of a tree, landscape mode, and wish to display the tree in portrait mode, the sure way to avoid the issue is to select the tree with one of the selection tools, then copy/paste it on a canvas which is sized 4x6" portrait mode.
Interesting reading: http://kb2.adobe.com/cps/331/331327.html
I am sure that others will be along, as this topic is not all black and white.

Trying to install multiple All in One Printers on new laptop

Got a new HP Envy laptop running Windows 8.1. Replacing old HP running XP. Trying to install two HP All in One printers on my home wireless network HP 6500 E709n and a HP 7410. I am stuck in an infinte loop using the HP Print and Scan Doctor. I load up one printer Driver using the downloads on the website. When I go to load the other printer, the system won't let me continue until I uninstall the previous printer driver and accessy software.
Anyone know how to get around it?

Hello again,
Thanks for getting back to me!
Next, I would suggest uninstalling all of the printer software on your computer, performing a clean boot and then reinstalling the OJ 7410 first and then the OJ 6500. Here are the steps and links in order for you.
Uninstalling the Printer Software
Restart the PC
How to perform a clean boot in Windows
Restart the PC
Download and Install - HP Officejet 7410 All-in-One Printer
Download and Install - HP Officejet 6500 Wireless All-in-One Printer - E709n
I hope this works for you!
Happy Wednesday
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Photosmart 3210 All-in-One printer will not read Micro SDHC memory card. Help!

I have a Photosmart 3210 All-in-One printer that will not read my Micro SDHC memory card. Help! I get an memory card error message but no idea where to go from there.

Hello
I understand the printer can't read the memory card.
This is a url for the printer specifications and include the memory card types supported.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00408357&tmp_task=prodinfoCategory&cc=us&dlc=en...
Here is a url for troubleshooting memory cards.
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c00059994
If you need more assistance just let me know.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Photosmart 3210 All in One - can't scan

I have uninstalled and reinstalled my Photosmart 3210 All in One printer a few times in the last month and a half. It hasn't solved not being able to scan. I have to use Microsoft Paint to do that. It keeps telling me the Digital Imaging monitor has been deleted or moved. It also can't find HP Twain Scan. I need help. the process listed earlier did not work. When I right clicked on HP Digital Imaging Monitor and Run as administrator, it said it was no longer in that location.

Hi ruthmarq,
I have done some research and I have located a document that deals with when Scanning Stops at the Preview Screen when the Printer is Connected to the Windows Computer with a US.... This document also has the link to the HP Print and Scan Doctor.
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
Thanks for your time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

All in One Printers for AE?

I've just returned to the Mac world after years with Windows. I've spent many hours trying to get an older HP printer to work with both XP SP2 desktop and wireless with my new MacBook Pro. It did work, but with some issues after research on this forum. However, when upgrading to Leopard, I lost the ability to print from the MacBook.
The printer is old, so I thought I'd just buy a new printer that is compatible with Airport Extreme. However, both Lexmark and HP only list discontinued printers as compatible with AE. Does anyone know if there are any new All in One printers that will work with AE? Or is the best solution to buy something that I hook up to the desktop and then print from the MacBook by sharing the printer? I only need to print wirelessly through the All-in-One. I don't use the scanner, but need to fax and copy occasionally.
Thanks!!!

Hook48 wrote:
It doesn't seem to me that I can find any printers that are current to buy that are compatible with AE. Is this correct?
It's not as though they are not compatible, it's more no one has either updated the manufacturers' lists or has tested and asked for it to be added to the unofficial list.
Some of the low end HP AIO (all-in-one) printers will only work though the USB port of an Airport base station through the use of third party drivers, and usually the P1000 PhotoSmart driver which (for some people) does not allow for good printing results.
You are either best to connect the AIO to a specific computer or purchase an AIO which either has an ethernet connection or is wireless.
iFelix

I need to scan wirelessly from a MAC (OS 1.7 or higher) through Adobe Acrobat Pro X (or higher). Have discovered that all in one printers say they are MAC compatible but will only scan when connected with a USB cable. Would prefer a laser, color, all in

I need to scan wirelessly from a MAC (OS 1.7 or higher) through Adobe Acrobat Pro X (or higher). Have discovered that all in one printers say they are MAC compatible but will only scan when connected with a USB cable. Would prefer a laser, color, all in one. Does anyone have printer suggestions that you know will scan wirelessly?

Great information.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Ccould you tell me the name of a all in one printers that i can use on mac and pc, could you tell me the name of a all in one printers that i can use on mac and p

could you tell me the name of a all in one printers that i can use on mac and pc, can i buy it in apple store

What version of OS X are you using? If it's recent (Snow Leopard or Lion), almost all the newest all-in-one printers (regardless of brands and models) are compatible with both Windows (XP and over) and OS X. Finding a network-operated (or shared) printer could prove more difficult, of course.
Now, buying one in an Apple Store is another matter, first because I'm not sure you can find printers there (I may be wrong, and it may depend on how big the Apple Store is; I don't remember seeing any in the Paris Apple Stores I went to, namely at the Louvres and near the Opera), and second because you're bound to pay a lot more for one in an Apple Store than in, say, a department store or an electronics retailer.
Here's a little food for thought: http://www.macbroadband.co.uk/mac-compatible/best-printers-for-apple-macs/

Are there any new All-in-one printers for sale that use the CLI-221 cartridges?

We have a MX870 Printer that needs to be replaced but new cartridges were just purchased from Canon. Are there any new All-in-one printers for sale that use the CLI-221 cartridges?
Thanks,
Margaret

The MX922 (known as the MX926 in Australia) is supported by 10.10 and Windows 7. Whatever site you were looking at may not have updated their details. Here is a link from the Canon Australia web site showing the drivers and applications for this model for 10.10.

Faxing from all-in-one printers

Hi,
Has anyone setup SAP faxing via those all-in-one printers?
A typical example is to fax PO to vendors. The vendor fax number can be setup as part of the vendor info.
Does it mean that I set the fax (printer) as a printer in SPAD?
What else should I do to set it up?
Thanks

You can't just set it up as a fax... you need a fax server in order to send faxes (I.E. Rightfax)... basically the way it works is that you create a node in SCOT for faxes and send the data to the fax server via SMTP and the fax server deliver the fax to your hardware.
Check the SMTP guide,
http://help.sap.com/SAPHELP_NW04s/helpdata/EN/af/73563c1e734f0fe10000000a114084/content.htm
Regards
Juan

What all-in one printers work with Lion?

What all-in-one printers work with Lion?

kennethfromtoronto wrote:
For Lion installation the recommendation was not to use the drivers on the included disk, but to download them directly from the Epson support site. I managed to install with no difficulties. Now the NX430 is working seamlessly with 15" MBP (Lion, 10.7.2); 13" MBP (Snow Leopard, 10.6.8); 27" iMac (Snow Leopard, 10.6.8); 15" Dell (Win7). I am sorry to hear that it did not work for you.
Ditto, most Printer/scanner manufacturers are getting up to date with Lion compatable drivers now. Most are available from their websites. Some still want to install old scanner software which is PPC so will have to downgrade to SL again, because they won't look for Lion compatable software. I find VueScan still an excellant program which works fine with my 3 yr old Cannon Pixma.

Which all-in-one printers work with OSX 10.9

Which all in one printers work with OSX 10.9?

See: This article is a comprehensive list of currently supported printer and scanner models and associated software provided by third-party vendors as of 23 January 2014.

I purchased the Photosmart all-in-one CN503B and after only 6 weeks its dead, no lights nothing.

Has anyone else had a power issue with the CN503B photosmart all-in-one, mine failed after only 6 weeks and I'm having a nightware getting through to warranty. As an HP employee I'm embarassed at the level of support given to customers so much so in fact I've put the printer in a cupboard and bough a Canon instead.

I have had a Photosmart 310a for about a year with no problems. Did you buy a unit through the employee sales channel? As I recall these are generally refurbished and do not have the standard (or any?) warranty.
That said, what are the symptoms? Does the LED on the power supply light up? If not you probably need a new power supply, probably available on eBay for under $15 with shipping included. The troubleshooting steps in this page may help resolve the issue.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

HP Photsmart 3210 All in One printers issues after reinstalling software/ Vista 32 bit

Similar Messages

Maybe you are looking for