HP Printer F4180- Scanner not working

I've installed Snow Leopard, but now its now letting me scan. It will print documents, but when I click 'scan' it says 'scanner not found'. I thought this update was supposed to make using my printer easier!!! Can anyone tell me how to sort this out? I depend on this scanner to create work and this is frustrating to say the least!
Thanks,
T SCOTT

I can confirm what everybody else in this thread has said and add one detail. I bought an HP 3055 all-in-one yesterday and after installing the software, not only wouldn't it scan ("waiting for PC..." forever) but it also wouldn't print, AND another HP printer elsewhere on my network STOPPED working.
After an hour on the phone with HP support (10 minutes just to register my info), the guy confirmed that there is no 10.5 driver, didn't know when there would be one, and added the following amazing fact. Not only does the software on the CD that comes with the printer/scanner not work with 10.5, it actually BREAKS its printing from Leopard (and similarly the 10.4 or earlier downloadable drivers from hp.com). He claimed that printing from 10.5 works on the 3055 out of the box, but if you are so reckless as to install the software that actually came with the printer, it permanently stops working. (Plus, apparently, stops the printing of other HP devices.)
He went on to say the only fix was to re-install the Mac OS . However, I can report that after un-installing every piece of HP software on my machine (using their uninstallers, not just deleting), then restarting, the printer now works, and so does the other HP printer on the network. (Scanning still doesn't work.)
Btw, echoing other complaints on this thread, the reason I bought a new HP scanner was because my old one had stopped working ever since (I think) 10.4, and I finally gave up.

Similar Messages

HP Photosmart C6300 printer/scanner not working after Snow Leopard install

HP Photosmart C6300 printer/scanner not working after Snow Leopard install
Reinstalling etc does not work - does anyone else have the same problem or a clue as to how to fix this?

Keith,
I got a C6280 and the scanner does not work anymore. I am for 6 days in contact with HP. The last printer driver install form the apple web site does not open the image of HewlettPackardPrinterDrivers.dmg because of an invalid checksum. The skipping of the validation gives and error in the install.

My printer is out of Black Ink .... why does my Scanner Not Work anymore?

My printer is out of Black Ink .... why does my Scanner Not Work anymore?

Hello Londen.
The community is eager to assist! To ensure the most accurate information is provided, we’ll need to know the model of the printer you are using. We look forward to hearing back from you!

Just upgraded my Cannon MP Navigator App for my multi-purpose printer/scanner not working correctlly

After upgrading to Yosemite MP Navigator App for my Cannon scanner not working properly, Buttons are not active and do not respond .... it works on my laptop with Mavericks ... I will be reverting back to Mavericks .. I use my Scanner a lot . Apple please fix this problem.

I have the same problem with a Canon MP530 under Yosemite. I'm not sure why Canon can't get their act together to have updated drivers and software. Very aggravating.
I can confirm that pmt513's workaround works. That's fine for single pages. But what about batch scanning?
Here's another partial workaround. The main MP Navigator interface still allows you to do the scanning, both single pages and batches. You just can't save, send, or export those scans. But the temporary files are on your disk in TIF format. If you don't mind taking those and converting them to PDF or JPG (which you can do in Preview), then just look in the following folder to the files:
~/Library/Caches/Temporaryitems/MP Navigator 2.2/SCN_MFP
I have put an alias to it on my desktop so that I can easily access the scans. Be sure to copy the TIF files out before you close (and thus clear) the MP Navigator window as that also clears the files from that cache folder.
I hope this helps some of you.

HP Laserjet 3052 Scanner not working

So I upgraded to Leopard and everything seems fine except I cannot run the HP Scan software. The printer [art still works but I just cannot scan. I have tried reinstalling the software but it still not working. HP have no new software and drivers for it yet.
Anyone any ideas?
Thanks,

I can confirm what everybody else in this thread has said and add one detail. I bought an HP 3055 all-in-one yesterday and after installing the software, not only wouldn't it scan ("waiting for PC..." forever) but it also wouldn't print, AND another HP printer elsewhere on my network STOPPED working.
After an hour on the phone with HP support (10 minutes just to register my info), the guy confirmed that there is no 10.5 driver, didn't know when there would be one, and added the following amazing fact. Not only does the software on the CD that comes with the printer/scanner not work with 10.5, it actually BREAKS its printing from Leopard (and similarly the 10.4 or earlier downloadable drivers from hp.com). He claimed that printing from 10.5 works on the 3055 out of the box, but if you are so reckless as to install the software that actually came with the printer, it permanently stops working. (Plus, apparently, stops the printing of other HP devices.)
He went on to say the only fix was to re-install the Mac OS . However, I can report that after un-installing every piece of HP software on my machine (using their uninstallers, not just deleting), then restarting, the printer now works, and so does the other HP printer on the network. (Scanning still doesn't work.)
Btw, echoing other complaints on this thread, the reason I bought a new HP scanner was because my old one had stopped working ever since (I think) 10.4, and I finally gave up.

HP Printer Assistant is not working ...keeps loading...

Hello, I have purchased a HP Officejet Pro 6830 All in One printer and have installed the software from the CD, installed updates and already used the HP Docter software but the Printer Assistant does not load. It keeps on with a blank screen, with the message that the Assistant is loading and Default Text message (see screenshot) it is just that, My system is Win 7 professional and compuer is Asus. The printer and scanner are working but the Printer Assistant software does not work. My previous printer was also an all in one from HP and it had HP solution Center to manage the printer and scanning process but reading the forum I understand that is not a solution for this problem.

Hi,
Although the issue seems different, try following this document and install the included patch, then check if you may able to load the HP Printer Assistant again:
http://support.hp.com/us-en/document/c03640384
Please let me know the results,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

GUI JAVA 7.20 rev.2 (on Mac OSX 10.6.3): Print preview does not work!

I've just started using rev 2 of java sapgui and print preview is not working anymore.
Client: OSX 10.6.3
SAP: ERP5.0 on WAS 640
Has anyone experienced the same problem?

This is the output in console when print-previewing:
I'm going to open a support message as adviced.
<code>
04/05/10 10.45.41     [0x0-0x3e63e6].com.sap.platin[6491]     Exception in thread "Loader for htmlViewer8_XZ_7" java.lang.NullPointerException
04/05/10 10.45.41     [0x0-0x3e63e6].com.sap.platin[6491]          at com.sap.plaf.frog.FrogListUI.updateColors(FrogListUI.java:63)
04/05/10 10.45.41     [0x0-0x3e63e6].com.sap.platin[6491]          at com.sap.plaf.frog.FrogListUI.propertyChange(FrogListUI.java:48)
04/05/10 10.45.41     [0x0-0x3e63e6].com.sap.platin[6491]          at java.beans.PropertyChangeSupport.firePropertyChange(PropertyChangeSupport.java:339)
04/05/10 10.45.41     [0x0-0x3e63e6].com.sap.platin[6491]          at java.beans.PropertyChangeSupport.firePropertyChange(PropertyChangeSupport.java:276)
04/05/10 10.45.41     [0x0-0x3e63e6].com.sap.platin[6491]          at java.beans.PropertyChangeSupport.firePropertyChange(PropertyChangeSupport.java:318)
04/05/10 10.45.41     [0x0-0x3e63e6].com.sap.platin[6491]          at java.awt.Component.firePropertyChange(Component.java:8233)
04/05/10 10.45.41     [0x0-0x3e63e6].com.sap.platin[6491]          at javax.swing.JComponent.firePropertyChange(JComponent.java:4428)
04/05/10 10.45.41     [0x0-0x3e63e6].com.sap.platin[6491]          at javax.swing.JComponent.setEnabled(JComponent.java:2638)
04/05/10 10.45.41     [0x0-0x3e63e6].com.sap.platin[6491]          at org.icepdf.ri.common.annotation.ActionsPanel.setEnabled(ActionsPanel.java:418)
04/05/10 10.45.41     [0x0-0x3e63e6].com.sap.platin[6491]          at org.icepdf.ri.common.annotation.ActionsPanel.<init>(ActionsPanel.java:106)
04/05/10 10.45.41     [0x0-0x3e63e6].com.sap.platin[6491]          at org.icepdf.ri.common.annotation.AnnotationPanel.setGUI(AnnotationPanel.java:128)
04/05/10 10.45.41     [0x0-0x3e63e6].com.sap.platin[6491]          at org.icepdf.ri.common.annotation.AnnotationPanel.<init>(AnnotationPanel.java:73)
04/05/10 10.45.41     [0x0-0x3e63e6].com.sap.platin[6491]          at org.icepdf.ri.common.SwingViewBuilder.buildAnnotationPanel(SwingViewBuilder.java:1574)
04/05/10 10.45.41     [0x0-0x3e63e6].com.sap.platin[6491]          at org.icepdf.ri.common.SwingViewBuilder.buildUtilityTabbedPane(SwingViewBuilder.java:1541)
04/05/10 10.45.41     [0x0-0x3e63e6].com.sap.platin[6491]          at org.icepdf.ri.common.SwingViewBuilder.buildUtilityAndDocumentSplitPane(SwingViewBuilder.java:1501)
04/05/10 10.45.41     [0x0-0x3e63e6].com.sap.platin[6491]          at org.icepdf.ri.common.SwingViewBuilder.buildContents(SwingViewBuilder.java:499)
04/05/10 10.45.41     [0x0-0x3e63e6].com.sap.platin[6491]          at org.icepdf.ri.common.SwingViewBuilder.buildViewerPanel(SwingViewBuilder.java:482)
04/05/10 10.45.41     [0x0-0x3e63e6].com.sap.platin[6491]          at ice.pilots.pdf.ThePilot.createComponent(ThePilot.java:149)
04/05/10 10.45.41     [0x0-0x3e63e6].com.sap.platin[6491]          at ice.storm.Viewport.setPilot(VCDO)
04/05/10 10.45.41     [0x0-0x3e63e6].com.sap.platin[6491]          at ice.storm.StormBase.append(VCDO)
04/05/10 10.45.41     [0x0-0x3e63e6].com.sap.platin[6491]          at ice.storm.StormBase.do_clear_content(VCDO)
04/05/10 10.45.41     [0x0-0x3e63e6].com.sap.platin[6491]          at ice.storm.StormBase.do_render_content(VCDO)
04/05/10 10.45.41     [0x0-0x3e63e6].com.sap.platin[6491]          at ice.storm.Viewport.runAsynchronousLoad(VCDO)
</code>
Edited by: Lorenzo Nicora on May 4, 2010 10:52 AM

Print Spooler does not work after Win 8.1 install

I upgraded several computers to Win 8.1. Most are operating normally and do not have this problem. This is relevant to show that it is not a printer hardware or compatibility problem. On one computer, the print function is not working.
I've tried reinstalling printers, getting new drivers, etc. It comes down to this. An active (connected) printer is selected and print test page is selected. The dialog box says that the print queue is full. I went to the queue subdirectory
and deleted all files, no change to the results. The Print spooler is active in task manager. Stopping and restarting the print spooler makes no difference. Any ideas?

I had similar problems with HP Printers on the LAN (after upgrade from Windows 8 tot 8.1
32bit)
HP Laserjet 4000 Laserjet 4050 and Laserjet 4250 - all with Network interface.
Erratic behaviour: inserting blank pages, no duplex printing, programs stalling when printing etc…
Printers and network are fully functional and work perfectly with W7 and XP. Not with Windows 8.1.
Strange thing: Epson Aculaser and Ricoh Aficio 3224 worked fine but those were installed after the Windows update.
So definitely something with the Microsoft drivers for the HP Laserjet printers.
After a few installs and uninstalls of the HP printer drivers the problems stayed.
Then I removed all HP related driver files (C:\\Windows\\system32\\spool\\PRINTERS")
and all references in the Register because the standard uninstall of the drivers did not remove all files.
-> First uninstall ALL HP printers (laserjet, deskjet, officejet etc ..)
-> Then look in
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Monitors]
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environments\Windows NT x86\Drivers]
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environments\Windows NT x86\Print Processors]
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Printers]
Make a backup of the registry keys and then remove all files starting with hp….
Remove the print processors starting with hp
(i.e. hpzpplhn.exe)
Then restart your system.
Reinstall the printers, they should be OK now.
If you still have duplex printing problems : replace the hpzpplhm print processor with the winprint processor. (may give other limitations, google for more info).
In my case this solved the erratic printing problems.

Ipad 2 Print button does not work after 6 upgrade?

Since we upgraded to iOS6, our print button does not work and does not find our printer. It was working fine until iOS6. Called an Apple Technician and he had me reset, which wiped out all of my saved information but didn't fix the print. He then started talking about a restore but the phone line went dead. Has anyone had this problem?

Today's iOS 6.1 update fixed the printer problem.

AcroPDF ActiveX print functions are not working with Adobe Reader 9.2 / Actobat Reader 9.3

AcroPDF ActiveX print functions are not working with Reader 9.2/9.3. Tried ActiveX print functions like printPages(), printAll(), printWithDialog(), none of them is working. Tried on platforms: XP 32 bit and Win7 32 bit. These print functions all work fine with Adobe Reader 9.1.0. or 8.2.0 or 8.1.0 on XP 32 bit or Win7 32 bit.
The way I have my setup: I have created a C/C++ project with AcroPDF MFC ActiveX classes. I have created an AcroPDF object in there, and then calling it's LoadFile() function passing a pdf file in the parameter. Then calling the printPages() or printAll() function. With Adobe Reader 9.1.0. or 8.2.0 or 8.1.0, printing is starting through the default printer without any problem. As soon as I update the reader version to 9.2 or more, the same code stops working.
Is anybody noticing any similar issue? Any info on this will be highly appreciated. Thank you!

Unfortunately printWithDialog() is also not working. Actually none of the print functions like Print(), printWithDialog(), printPages(), printPagesFit(), printAll(), printAllFit() are working. All of them works fine though with older reader.
BTW, what security related changes are there for printPages() and printAll()? Can you please elaborate on that? Is there any workaround?

The print control could not work?

Hi,
I want to set my characters upside down in my smartforms,and i got something from the net about print control.I used the print control 'COL2V' in 'CNSAPWIN'.
But when i printed this form,it seems the print control did not work.So,anyone who could help me?

If you Google COL2V you'll find that this is a control for ABAP List for "inversed" font, which is not upside down, I believe, but just the color inversion (e.g. white on black background).
There are many questions on SCN regarding the text rotation (use Search) but since even SAP delivers a bitmap where a rotated text needs to be in the Smartform, I doubt there is such option through the print controls.

Why does my printer HP 3080 not work with Mac OS X VERSION 10.7.5

Why does my printer HP 3080 not work with Mac OS X VERSION 10.7.5. Am I missing a driver? If so where do I go to download it? thanks

What's the full model number and name of the printer? I can't seem to find any HP printer with the numbers 3080 in the model number.
How are you connecting the printer to the Mac?
I am a printer tech for HP.

MY PRINTER SCANER IS NOT WORKING

MY PRINTER SCANER IS NOT WORKING
WHAT CAN I DO

Hello laharpur,
Welcome to the HP Support Forums!
I would like to help with your All-in-One not working, could you reply with the model of printer and the Operating System installed on your computer Windows or Mac?
I will keep an eye out for your reply.
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

The print tab does not work in mapquest

The print tab does not work in mapquest

You are on the right track to getting the printer installed regarding firewall but perhaps it has saved in a different port on your computer than can communicate correctly. Search Devices and Printers on the Windows 8 PC so you can pull up the printers' folder. Do you see the Officejet 6500 in here (meaning have you installed it again)? If you do not see it here, check your Print Server Properties and make sure the driver is not in here either, if so remove it. Restart the Print Spooler. Make sure you uninstall it completely and shut down the PC (see video link on how to uninstall HP drivers and restart the print spooler in Windows 8 if needed).
Remember to re-install the Full Feature Software and Drivers (for your OS and region) when the PC reboots. Try the test print and if it does not print:
1. Right-click on it and select Printer Properties.
2. Under the Ports tab make sure you see the printer's IP address here or a serial number. Sometimes the HP network -rediscovery ports can be tricky.
3. When the printer is high-lighted in this window, click Add Port.
4. Select Standard TCP/IP and follow the rest of the prompts in the Wizard to enter in the printer's current IP address.
5. Try to print.
If this does not help you, you may have other computer problems.
Have you ever installed a printer on this PC before?
What is the name of the anti-virus software you use?
Are you on a server, proxy, or other elaborate wireless setup?
Answer those questions for me please if the above information does not help you. I will do my best to assist.
Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
When a solution is found please mark the post that solves your issue.
Every problem has a solution!

Print queue does not work

Since the update I did from Tiger to Leopard the Print Queue does not work. When I print a document the printer starts to jump up and down on the Dock for more than 5 minutes. Printing finishes and the icon of the printer is still "dancing" on the Dock. If I try to open Print Queue the window does not open immediately but after a long time and I can't see the printing documents that are waiting in the queue. As a result I can't stop or pause or delete a printing document. The same thing happens if I try to open Print Queue from the Print & Fax Preferences' window. The window opens after a long delay and nothing can't be controlled from this window. I forgot to say that the printer icon remains on the Dock and Force Quit is the only option I have when trying to quit it.
I have tried Permissions Repair. Nothing happened. I installed the latest driver. The problem is still there. Only after Reseting Printing System the problem is fixed but until the first reboot. If I restart the computer then the problem appears again and the only thing I can do is to Reset again the Printing System. So, if I want to control the printing procedure, I have to Reset Printing System after every restart!!! Any help???
P.S. I have a Canon iP4500 but I don't think that the printer is the problem because with Tiger I had never face this problem and I have also printed with this printer from a MacBook running Leopard with no problems.

1) I tried Print Therapy and after I had repaired Permissions the problem was solved (some permission problems were found) until the next restart.
2) Then I tried to stop and start again the cupsd process and again the problem was solved until the next restart of the computer.
3) Then I replaced the cupsd.conf file with a new one but the app asked to restart the computer and after this the problem was back.
4) Print Therapy does not find any problems neither in the properties of the root user nor in the current user or any other group.
5) Also the verification of the temporary files find no problems.
In conclusion I think that the problem lies in the cupsd process because when stopped and restarted (we can forget that by Repairing Permissions actually we restart cupsd) I have no problem until the next restart of the computer.

HP Printer F4180- Scanner not working

Similar Messages

Maybe you are looking for