HP printer has stopped working - Laserjet p1006

I just installed Windows® 8 Consumer Preview and my HP printer has stopped working. I am using the Laserjet p1006 and I have tried everything, reinstalling the printer, re-downloading drivers etc. but to no avail. Are there new drivers available that work with Windows 8?
Update:
The printer is installed and driver has been picked up by Windows but every time I try and print something, it gives me an error that the document could not be printed.
Any suggestions

Really Thanks God
i Found solution of this problem Randomly only by praying
The solution
Connect The p1005 printer to a pc have windows 7 and print a page with it and get the cable connected to windows 8 after that and go to control panel > hardware and sounds > Device and printer > hp laser jet p1005 Right click > Printer properties > ports > uncheck bidirectional support then press ok and print ,, it works
Note : after doing the pervious steps if u turned the printer off u will need to connect it to windows 7 pc again and print and connect it to windows 8 it will work without the pervious steps //
it seems like if windows 7 gives it information that is reseted after turn it off
we wish windows 8 to solve this problem nearly
That is the Original post page : http://answers.microsoft.com/en-us/windows/forum/windows_8-hardware/laserjet-p1005-will-not-print/34...

Similar Messages

My Canon Pixma iP8500 printer has stopped working with Mavericks

Hi, my Canon Pixma iP8500 printer has stopped working in the past few days and I made no alterations that could explain why this might happen. I am using OS X 10.9.5 Mavericks on a Mac Pro desktop computer. I can print a test page when selecting it on my Canon Printer Utility from my desktop so it seems that there is contact between the computer and the printer but it will not print from iPhoto, Preview or Mail. When I select Print from any of these nothing happens and there is nothing on the Print List. I have checked the Printers & Scanners in my System Preferences and my Canon iP8500 is listed and highlighted as Idle Default and Share this printer is ticked. I have tried deleting this printer then adding it but it still will not print. I would appreciate any helpful suggestions bearing in mind that I am fairly elderly and have a limited knowledge of IT and some of the terminology.
Thank you,
Colin.

Hi, might try this...
Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions.
Any devices that previously appeared in your Printer List and Fax List will need to be added again after resetting the printing system.
Resetting the printing system in Mac OS X 10.5.x+++
    1.    To use the Reset Printing System feature in Mac OS X 10.5.x, follow these steps:
    2.    Choose System Preferences from the Apple menu.
    3.    Choose Print & Fax from the View menu.
    4.    Control-click on list of printers on the left side of the window, then choose "Reset printing system" from the contextual menu. If you don't see a list of printers, Control-click on the text "Click + to add a printer or fax" and select "Reset printing system..."       As an alternative, if you currently have one or more printers listed, you can Option-click the "-" (Remove printer) button.
http://support.apple.com/kb/ht1341
Reboot.

Two sided printing has stopped working

Two sided priting has stopped working. Print dialogue box shows two sided as "ticked" but print comes out one sided on two sheets OR "layout" has started to show "long edge binding" as GRAYED OUT. Any ideas please???

Hey , Welcome to the HP forums! I hope you enjoy your stay here. I see that you are having options with two-sided printing to your Officejet Pro 8500 A Plus from your Mac 10.10 system. I can help with that. Here's what we'll do to solve this: Go to your Apple Icon, System Preferences, Printers and Scanners.Hold down the Command key and click on the picture of your printer on the left.Click on Reset Printing System.Go to Applications, Utilities, Disk Utility.Click on Macintosh HD on the left.Click on Verify Disk Permissions. This should take about ten minutes.Click on Repair Disk Permissions. This should take about ten minutes.Restart your Mac.Go back to Printers and Scanners.Click on the plus button in the bottom left corner.Select your printer.Next to the line that says Use click on the box and click on the name of your printer in the list.Click on Add.Try printing.This should allow you to print two-sided. If this resolves your issue then please let other forum users know by clicking on Accept as Solution below my post.
I hope this helps and I hope you have a great day!

My Epson R2880 printer has stopped working - 'filter failure'

My prized Epson R2880 has suddenly stopped working. I upgraded to 'Mavericks' some time ago but for some reason this error popped up today and there appears to be no remedy.
Have tried deleting the printer and 're adding it several times' - no good. Epson site says that driver updates are available only from Apple. Apple update did not work.
Luckily I still have a trusty PC to fall back on but I really expect the Mac to contiue to work with this printer.
Any ideas?

If you haven't done so already, try resetting the printing system.
OS X Mavericks: Reset the printing system also Yosemite

Network printing has stopped working

Several years ago I connected my HP 6300 All-in-One to a wireless router. My workstation is hardwired to the printer. My laptop is connected via networking.
Everything worked perfectly until last week. Now I can only print from my workstation. I checked the printer sharing settings on both computers and they are set to be shared.
The printer has been acting pretty strange lately. After every printing it gives me a "paper jam" error, when there is no jam. The only way to clear it is to turn off the printer, pull out the paper, then turn the printer back on. When it comes up I put the paper back and it will be fine for the next print job. Then I have to do it all over again. This started to happen before the network printing stopped working.
Also, I have my HP software disk. I put it in my PC thinking I would try to reconfigure network printing again, but nothing happened. I double clicked on 'setup.exe' in the root directory and the system hung. I tried the disk on the laptop and couldn't even view the files in Explorer.
I'm running Windows XP on both computers. All Windows updates are current.
Any ideas would be much appreciated.

Download and install the newer full featured software and drivers from the HP web site here. Now try.
http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=1821125&cc=us&taskId=...
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

My Epson Printer has stopped working with my Mac Air

I have asked Epson for support but they keep telling me the obvious about deleting the printer via settings and reinstalling again. There have been several updates from Epson at the same time so there is obviously a problem but this is getting ridiculous now. Has anyone had the same problem and how have you sorted it out.
My Epson is Office Stylus BX635FWD.
Thanks

If you haven't done so already, try resetting the printing system.
OS X Mavericks: Reset the printing system also Yosemite
Is the printer attached to the computer or is it a network printer?

Emailing files to my M1536dnf printer has stopped working

I used to be able to email files to my M1536dnf printer. Then I tried to install a driver for this printer on another computer and, by mistake, installed the entire printer web services package on the second computer. (I've since removed all that software from the second computer.) After my mistake, I can no longer send files to the printer by email AND I am locked out of the eprint center (where I could change the email address.) When I try to log in to eprint center I get a consistent message: Ajax submit failed: error =403, Forbidden
So I'm stuck and don't know how to proceed. (I can still print to this printer over my local network AND I can print to it from Google Cloud. It's only printing via email that seems broken.
Thanks for any ideas.

Software or drivers installed on your computer should not affect ePrint in any way. One thing that could have happened is that web services was removed from the printer.
As for the Ajax 403 error, It's possible that there's a setting in your web browser responsible for what you're seeing. I would recommend trying the following steps:
1. Try to view the site in a different web browser to see if that's the issue. Normally, Internet Explorer, Google Chrome, Firefox, and Safari all display the website properly. Try one or two of those (other than the one you've been using) and it should do the trick.
2. If that doesn't work, try resetting Internet Explorer's default settings by clicking "Tools" (on the top menu bar), "Internet Options" (usually at the bottom of that list), "Advanced" (far-right tab), and "Reset" (towards the bottom-right of that box). After resetting the defaults, try viewing the ePrint Settings area again.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

The setup button on my MX350 printer has stopped working.

Mx350 setup button no longer working. Can't setup new computers or use wifi.

If there is Warranty or AppleCare make Genius reservation or Service arrangement and take or send to Apple for resolution with one year Warranty. Until you do so, you can use Virtural Power Button. Tap Settings App > General > Accessibiltiy > Assistive Touch > ON > tap the new small white screen button > Device > Lock. This can even be used to turn the iPhone OFF. To turn back ON, connect iPhone to power ie charger or USB of computer.

My airprint has stopped working. It has work well for several weeks and stopped for no apparent reason.

I have performed all the abvious checks and cannot find anything wrong or anything that has been changed. I have consulted several forums and have not found anyone having the same problem. I have an iPhone4 and an iPad2. Air print has stopped working for both devices. I'm guessing it must be something with the printer, which does work very well with everything but airprint. The printer in a HP Officejet 6500A Plus.

After some research, I figured out a work around to sovle that problem. On the router, I created a entry for port fowarding, the trggering port and targeting port with 5353. That seems fixed the problem with lost 6500A plus communication with MAC issue. The problem seems related with Banjour service which is utilizing UDP 5353. I did a trace on the router and found most of MAC products, such as MacBook will trigger the 5353 when connected with router, but some how, the 6500A will only trggering 5353 on router initializing, then lost its communication through 5353 aftrer few mins. Don't know why, but the work around seems working fine.
Hope that give everyone still battling this issue some ideas.

Printer Software Installer has stopped working

Product: HP Laser Jet M1005 MFP
OS: Windows 7, 64-bit
Notebook ACER , Aspire 5349, Intel Celeron CPU B800 @ 1.50 GHz
(new notebook, old printer - printer worked well on Windows XP)
I downloaded driver ljM1005-HB-pnp-x64-en. Driver had been extracted and setup started.
Installation started and after some initialization (~10 sec) it kept writing:
Preinstalling the driver files... or Copying files to hard drive... (switching approx. once per second) after a while (~ 20 sec)
Printer Software Installer has stopped working. Windows tried to find solution but did not find anything.
I TRIED ALREADY EVERYTHING. I used patch for AMD processors (of course, did not work); I have Windows installer up to date; I disabled Internet Explorer 9.0 (I cannot uninstall and iether can I step back to IE 8.0 since notebook is brand new); There is no windows driver preinstalled for this printer and there is no similar driver working.
Driver cannot be installed and printer does not work.
Please, help.

Hello,
Thanks for the post. This is an odd one, I might suggest the method outlined below in the third link, if that does not help, I might recommend that you post this question on the following links below. Good Luck!
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
http://h30499.www3.hp.com/t5/Business-Support-Forums/ct-p/business-support
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=115&prodSeriesId=...
I worked for HP but my posts and replies are my own....Thank you!
*Say thanks by clicking the *Kudos!* which is on the left*
*Make it easier for other people to find solutions, by marking my answer with (Accept as Solution) if it solves your issue.*

HP CUE-Scanning Flow Component has stopped working on printer settings

Hello,
When i click Printer Settings or when i am done with scan and need to send it to printer i got: HP CUE-Scanning Flow Component has stopped working error. Specifications of system are below.
OS: Windows 7
Scanner: HP ScanJet G2400 (System saying: G2410 )
Printer: HP LaserJet 1010 USB ( Drivers for Win XP by reccomendation from this forum, not my post )
Solution Center Ver: 130.0.44.62
I belliwe error is printer driver, and dont say to switch to Vista drivers, TOO buggy.
This question was solved.
View Solution.

Hello ArsenArsen,
Welcome to the HP Forums!
I understand your concerns. Unfortunately, for this Scanjet and this Laserjet printer, I need to direct you to our Enterprise Business Community Forums. This will be the right section to troubleshoot this issue.
Good luck.
I worked on behalf of HP.

PRINTER 6510 e-all in on. photo product core exe has stopped working?lang=en

i installed the 6510 all in one printer, it works great but the photo creation has a message that is (photo product core exe has stopped working). that should i do to fix it?
This question was solved.
View Solution.

Hi Puhu.
Please contact our customer support team at [email protected] They can help get you printing again.
Thanks for writing,
RocketLife
RocketLife, developer of HP Photo Creations
» Visit the HP Photo Creations Facebook page — news, tips, and inspiration
» See the HP Photo Creations video tours — cool tips in under 2 minutes
» Contact Customer Support — get answers from the experts

"remote desktop connection has stopped working" When printing from remote desktop connection

I have been having a issue when using a windows 7 machine. I have Remote Desktop to a session on Windows2008 R2, I am using the local printer resources to redirect the printing. However everytime i try to print it crashes the remote desktop application.
Gives me "remote desktop connection has stopped working." I have 4 other computers connected and printing with no issues what so ever. This only happens when i print. It does print by the way just the application crashes.
-I have also updated the printer drivers to newest possible thru the manufactorer website. The printer is a Brother MFC-8890DW. Windows 2008 R2 is up to date for the RDS server. 3 other machines are able to Remote in and print. The user is able to print using
diffrent machines just not the Windows 7 machine.

Hi,
Happy to hear that you resolved your issue. For another issue which you are facing here trying to provide some suggestion.
As you have commented that you are facing issue with second screen resolution on wide screen. The setting which I am suggesting can only applies when you are using multi-monitor Remote Desktop connections. If you are making Connections using a single
monitor do not use this setting.
So for this you can try to apply “Limit maximum display resolution” setting in group policy, where you can mention the width & height for the screen to display. The setting can be applied on below mentioned
path.
Computer Configuration\Policies\Administrative Templates\Windows Components\Remote Desktop Services\Remote Desktop Session Host\Remote Session Environment
Meanwhile sharing article with you for more information.
Remote Session Environment
http://technet.microsoft.com/en-us/library/ee791847(v=ws.10).aspx
Hope it helps!
Thanks.

Laserjet CP1025nw HP system tray has stopped working

I bought this printer a month ago and about a week ago I started getting the error“HPCP1020SM.exe (64 bit) has stopped working.” then click close then“HP system tray has stopped working.” appears click close. the printer will still print but these errors continue to come up every time I print. I called HP support but they have no clue. Thanks for who ever can help.

Hi Have you tried installing the basic driver, and the basic driver update to see if you have the same issue? Let me know if you have the same issue using the basic driver. Can you also provide me a screenshot of the error message you are receiving? Firmware update: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=lj-86491-4&cc=us&dlc=en&lc=en&os=228&product=4052972&sw_lang= Basic driver:http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=lj-90357-1&cc=us&dlc=en&lc=en&os=4063&product=4052972&sw_lang= Basic driver update:http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=lj-98162-1&cc=us&dlc=en&lc=en&os=4063&product=4052972&sw_lang=

I deleted Bonjour, since I don't need it for remote printing. Now I get the message " Airport Base Station has stopped working: and also a message saying APAgent.exe can't be found. What to do??? Thanks.

I deleted Bonjour since I don't need it for remote printing. Now on start-up I get the message: "Airport Base Station Agent has stopped working" and also message: "can't find APAgent.exe.: Do I need AP Agent?? What to do?? Thanks.

The APAgent monitors your AirPort base station and informs you if there are things like firmware updates available. This utility relies on Bonjour, but is not required for base station operation. However, Bonjour makes it easier for your PC to "find" the base station via the AirPort Utility and I would recommend that you keep it installed. If you don't want the APAgent, you can just use the Apple Updater utility (that was also installed when the AirPort Utility was installed) to remove it.

HP printer has stopped working - Laserjet p1006

Similar Messages

Maybe you are looking for