HP Printer issue after installing Mountain Lion

Hi, a few days ago I posted the following question regarding a printer issue and so far I have not been able to fix the problem. Here's the original question and I will continue the explanation after this....
Hi, I am a fairly new iMac owner and I am really happy with my apple, however I have an issue with my printer and I kind a "blame" Montain Lion for it. I have been using this HP Laserjet P2015 dn printer for a long time, initially with Windows and now with iMac. The first year approximately there was no problem at all to print and the transition from Windows to Mac with the printer had no difficulties at all. It was connected wirelessly via router. After downloading Montain Lion I notice the printer intermittently lost connectivity. The only way to print was turn off and turn on and it will print fine until the next time. Now out of the blue it's doing the same thing so frequently I can't print a complete document at all. It starts, and finish without printing the entire document or not connect at all. I have tried everything, including a static IP address for the printer, connect the printer to the computer via USB, downloading all the printer updates from HP and nothing seems to work. Just now, I did it again (for 100 times so far), delete the printer, reinstall and it's doing the same thing. It connects fine (either via IP or USB) and it last connected only for a minute or two. That's it. It's a shame, because I like the printer. The printing quality is great and to add more pain, I recently got a new ink cartridge ($100.00) capable of printing 3000 pages. It has 70% of ink still. Any computer sabby person out there has any ideas for me? Like I said, I've done everything.... inluding,
1. Remove the printer
2. Update the drivers
3. Assign a static IP address to the printer
4. Connect via USB
5. Disconnect the printer for a while and restart the whole process again
6. Did a "cold start" to the printer
I don't know what to do, and I don't want to spend more $$$$$ on a new printer. Is Montain Lion to be blame for? Please advise me.
Any help will be greatly appreciated.
At this point I do have the printer connected only via USB, prints one page (perfectly) and then goes offline. Before installing Mountain Lion I did use the printer with my Mac for almost a year with no issues at all. I even downloaded Mountain Lion again thinking of any flaws during initial installation. I've done all the updates, drivers, uninstall, re install, repair disk permission, static ip address....you name it... I've done it all and nothing seems to work. What makes no sense to me is that prints so great only one page and then is gone.... I would be happy to know the printer is dead and go get a new one but in my mind if it prints ok one page it still works. I don't want to have a new printer and find out it does the same thing. I can't keep myself away from blaming Mountain Lion. IS THERE ANY WAY TO REMOVE MOUNTAIN LION WITHOUT THE RISK OF DAMAGING THE COMPUTER???? PERHAPS GOING BACK WILL PROVE ME MOUNTAIN LION IS THE CULPRIT. Just saying... I am totally frustrated. I guess the next step is to get a baseball bat and fix the printer once and for all.
Any help will be greatly appreciated.

Any fix for this? I have the same problem after upgrade. It's off by many seconds. Thank you.

Similar Messages

Ethernet connection issues after installing Mountain Lion

After installing Mountain Lion I can't get my iMac to connect by ethernet. It says that no cable is connected. The cable/connection is fine. When I plug in my MacBook Pro running Lion, the ethernet connects just fine.

same exact problem. in fact, my iMac24 (2009) worked flawlessly until I installed the latest update to Mountain Lion. I then checked my MBAir (2011) and it too has a problem when using the USB/Ethernet adapter. Neither can get an ethernet connection. I deleted my network preferences and rebooted my machine, played around with my Ethernet switch and even reboot my gateway/router. I've never had to do any of this to my network until Mountain Lion. Wireless is the only thing that continues to work on both machines.

Cannot print PDFs after installing mountain lion

I recently upgraded to mountain lion and have been having a series of problems!
The latest is that after updating my drivers for my printer Brother 7840W, I am able to print word documents. But I just found out that I cannot print PDFs. It says, "looking for printer..." However, I can cancel that and go and print a word document. So, i'm at a loss as to what the issue is. Any thoughts?

The iMovie forum is here
https://discussions.apple.com/community/ilife/imovie

HP Envy printer issues after loading Mountain Lion

Hi Since loading Mountain Lion on Macbook Air Command P on a web page prints only part of that page? For example in printing a bank statement, the description but not the amounts printed and many of the headings did not print.

Thank you to all but after rebooting, problem seems to have disappeared.

Startup issues after installing mountain lion

Since I updated to mountain lion two days ago I'm having issues starting my mac after system shut down. When I switch my mac on I get a black screen with what looks like DOS writing, it won't go to the login screen unless I hold down the power button till it shuts down then switch it on again then it will boot fine! I've tried repairing disk permissions but this has not helped.
Any ideas?? tried ringing apple but they're closed :-(

Hi Guys...
Sorry its taken me a fews day to get back, well as it stands the situation is still the same!
Heres what I've done so far:
reset the PRAM - no joy
reset the SMC - no joy
ran the disk repair in recovery - no joy
repaired disk permissions in recovery - no joy
reinstalled mountain lion - no joy
but I think I've narrowed down the problem from the log console, it would appear that my imac is automactially booting into single-user mode.... see below.
01/08/2012 12:03:00.706 com.apple.launchd[1]: *** launchd[1] has started up in single-user mode. ***
01/08/2012 12:03:00.709 com.apple.launchd[1]: *** Verbose boot, will log to /dev/console. ***
01/08/2012 12:03:00.712 com.apple.launchd[1]: *** Shutdown logging is enabled. ***
any ideas on how to rectify this would be great please...

HT4718 About Lion Recovery issues after installing mountain lion

After finishing the installing process of OSx Mountain Lion from the App store, and trying to boot, an error was presented saying failed to create Recovery boot, so I got stuck.
Now anybody knows if possible to install correctly, without creating an external drive with installation of OSX and recovery boot first?
Tx
Mario

Here's a working bootcamp hard drive ( OSX 10.7 & Windows 7 ):
MacBookAirs-MacBook-Air:~ macbookair$ sudo fdisk /dev/disk0
Disk: /dev/disk0          geometry: 30515/255/63 [490234752 sectors]
Signature: 0xAA55
         Starting       Ending
#: id cyl hd sec - cyl hd sec [     start -       size]
1: EE 1023 254 63 - 1023 254 63 [         1 -     409639] <Unknown ID>
2: AF 1023 254 63 - 1023 254 63 [    409640 - 244140624] HFS+
3: AB 1023 254 63 - 1023 254 63 [ 244550264 -    1269536] Darwin Boot
*4: 07 1023 254 63 - 1023 254 63 [ 245821440 - 244412416] HPFS/QNX/AUX
So do I just need to turn the 0C on my mac mini to a 07 ?

Does this mean my imac is dying? only had issues after installing mountain lion:

One of my drives seems to be at zero capacity, however I do not have near enough stuff on it to fill 499.25 gb Model Name: iMac Model Identifier: iMac8,1 Processor Name: Intel Core 2 Duo Processor Speed: 2.66 GHz Number of Processors: 1 Total Number of Cores: 2 L2 Cache: 6 MB Memory: 4 GB Bus Speed: 1.07 GHz Boot ROM Version: IM81.00C1.B00 SMC Version (system): 1.29f1 Serial Number (system): YM************6 Hardware UUID: 781EE1AC-9FE9-5E63-B077-27AF5AA70DC2 gvu: Available: 321.42 GB (321,417,748,480 bytes) Capacity: 498.93 GB (498,929,332,224 bytes) Mount Point: / File System: Journaled HFS+ Writable: Yes Ignore Ownership: No BSD Name: disk1 Volume UUID: 6600AAE4-B4A2-372B-A1B5-A111A4509A9F Logical Volume: Revertible: Yes (unlock and decryption required) Encrypted: Yes Encryption Type: AES-XTS Locked: No LV UUID: 94883655-9AA9-4F15-A3CA-DD186B155895 Logical Volume Group: Name: gvu Size: 499.25 GB (499,248,103,424 bytes) Free Space: Zero KB LVG UUID: 5BB41A33-47E6-49FC-87EC-F4D739377BD2 Physical Volumes:disk0s2: Media Name: WDC WD5000AAKS-40YGA1 Media Size: 499.25 GB (499,248,103,424 bytes) Medium Type: Rotational Protocol: SATA Internal: Yes Partition Map Type: GPT (GUID Partition Table) Status: Online S.M.A.R.T. Status: Verified PV UUID: 5CEE58ED-07D1-4D4E-B1F1-FAF9B0C77970
<Personal Information Edited by Host>

There is one thing you can do to try to determine what's consuming that space. Launch a Terminal session, then type this command:
sudo du -d 1 -h -x /
and press <return>. You'll be prompted for your administrative password, which won't be echoed as you type it. Press <return> again after you type the password.
The output will show one line for each file or directory at the top level ("/") of your disk. That will give you a first-cut picture of what's consuming the space.
Here are the things on my system that have a non-trivial amount of space:
975M /.Spotlight-V100
15G /Applications
17G /Library
5.8G /private
3.8G /System
37G /Users
606M /usr
For more details on a particular entry, just put its name after the slash on that command, such as
sudo du -d 1 -h -x /private

After installing mountain lion i lost my pictures in iPhoto, lost my music in iTunes, internet became very slow. What can I do to fix this issues

after installing mountain lion I lost pictures in iphoto, lost my musisc in itunes, my icluod is not working, internet its very slow and some other issues. There is a way how to fix these issues

Open System Preferences > iCloud
Deselect the box next to Photo Stream then reselect it.
Now for your music. Launch iTunes. From the iTunes menu bar top of your screen click iTunes > Preferences then select the Store tab.
Select: Music. (and Apps and Books) if you want.
Click OK.
iCloud syncs via your Wi-Fi network so give it a minute or two to reset your photos and music.
Slow internet ... try turning off the modem for a few minutes, then turn it back on.

Printer won't work after installing mountain lion?

printer won't work after installing mountain lion?

Assuming you've first checked Software Update to see if there are any updated drivers and it's still not working, you could try resetting the printing system.
System Preferences>Print & Scan, Control+Click or Right Click on a printer on the left and select 'reset printing system'. All printers will be deleted and need to be added again.

After installing Mountain Lion two drives on my network cannot be accessed. I am using Parallels to utilize QuickBooks ERP. The programs and data are on the drives that I can no longer access. Suggestions?

After installing Mountain Lion on my Mac Book Pro, I can no longer access two shared drives. Diagostics cannot solve the problem. I am using Parallels to run Qucikbooks ERP on these shared drives. How do I get my Mac to see these drives and access them?

Don't know what to tell you, but I also have an AEBS-Gen5 with a MBP Retina and Mac Mini using WiFi. Both are running Mountain Lion and I don't have any WiFi connection issues. Two iPhones in the household use WiFi with no issues along with a printer and 2 Windows 7 laptops.
First thing I would try is to shutdown all computers connected to the AEBS. Then power off the AEBS and finally the cable/DSL modem. Then reverse the order and power on the cable modem, wait for all the lights to be solid, power on the AEBS, wait for the light to show solid green; then power up a computer that uses WiFi.
If the above doesn't work, you might try repairing permissions via Disk Utility. If that doesn't help maybe a PRAM reset would work.

Can No Longer Get Camera Photos After Installing Mountain Lion

After installing Mountain Lion, I am no longer am able to see pictures from my digital camera thru the USB port. This camera has worked for years with my iMac, but not anymore. Anybody else having this issue after installing the newest system?
Dick

Paul_31:
I have not tried to import the photos directly into iPhoto. However, I did remove the SD card from the camera and plug it into a USB card reader, and my iMac would NOT read the photos that way either. I took the camera and plugged it into my Win. 7 laptop and the pictures showed up nicely, so I know the camera and the card are Ok. My iMac has been working strangely since I installed Mountain Lion. I'm getting lockups using iMovie too.
Dick

My macbook pro is very slow after installing mountain lion

my macbook pro is very slow after installing mountain lion? Is anyone else having this issue?

If you don't use an SSD and bump your RAM up to 8 Gb's you may experience slow speeds, but I noticed slow speeds with your general configuration in SL.
one thing you should consider right now is, Spotlight is Reindexing your hard drive, that takes time and resources, (resources which you don't necessarily have to spare).
If you continue feeling like your performance is slow, you have a few options with this computer (I have the same one).
the express card slot can house a wintec SSD drive. That little door on the side of your machine is pure gold for a really quick solution for speeding up your machine. I have one in mine right now i'm using as a scratch disk for CS6 but I used to boot from it, and the speed boost was out of this world.
You could take out the internal HDD and put in a new SSD (I have a Vertex 4 from OCZ) it is completely over kill but my experience is pretty fast and I keep up with the later MBP models colleagues have.
There are some other options for you like taking out the optical drive (however I don't know if I'm supposed to talk about that here). Google Data Doubler.
You need to also set it to always use the 9600 chipset, this will increase performance a lot too. to do this go to system preferences>energy saver>Better Performance. This switches the video card to the better one and makes a world of difference.
Lastly, your RAM. after an EFI Firmware update, our computer support up to 8GBs of RAM. Do it!
Late 08 MBP 2.53 GHZ 9600 chipset 8gb ram, Vertex 4 SSD

After installing Mountain Lion, my iTunes app wont start, why ???

After installing Mountain Lion, my iTunes app wont start, why ??? It bounces in the dock, then "Unexpectedly Quirs"

Let's keep it simple...
1) Make a new user - the steps are in http://support.apple.com/kb/HT1199
2) Log into that user, open iTunes, agree, etc. - it will probably work
3) If it does, it tells us that iTunes (the program) is fine but it's encountering something unexpected
4) Go back to your user, and try to open iTunes while holding option and making a new library - like suggested in http://support.apple.com/kb/HT1589
5) Your iTunes will be empty. This is ok. Your files are not touched by this process.
6) If iTunes doesn't quit when loading an empty library, you could try rebuilding the iTunes Library as Apple documents in http://support.apple.com/kb/HT1451
7) If iTunes does quit, it could be trying to grab something - like photo information to sync to your iPad - and that's where it finds the unexpected data. Maybe try moving the iPod Photo Cache? http://support.apple.com/kb/TS1324 should guide you for how to do that.
If you tell us whether it is library-specific, user-specific, or system-wide (happens in both users), we could maybe give you better advice on what's going on.'
If the new user has the same behavior, maybe remove the SC Info folder - there are not many system-wide files iTunes touches. http://support.apple.com/kb/TS1389 covers how to remove that invisible folder.
iTunes uses /Applications/iTunes.app, /Users/Shared/SC Info, ~/Music/iTunes/ and ~/Library/Preferences/ and a bunch of other files. I don't think focusing on /Applications/iTunes/app or other system-wide files is going to be as effective as knowing whether the issue is system-wide or user-specific.
I hope this helps and feel free to reply if this is all confusing.

HT1338 After install mountain lion my superdrive do not work

i facing problem after install mountain lion 10.8.2. my superdrive do not work properly , when i insert a disk to superdrive after 20-30 seconds left cd eject. if you have any solution about solve this problem , pls tell me.

After recently upgrading my mid-2010 Mac Mini from Lion to Mountain Lion 10.8.2 my superdrive stopped working. I did a clean install of Lion to a blank SSD. Then I upgraded to Mountain Lion from the App Store. Then I tried reading a Windows 7 installation DVD. Any DVD I insert in the internal superdrive is not recognized by the system and is ejected after a few seconds.
I tried cleaning the superdrive with a DVD lens cleaner. This did not fix the problem.
I tried a SMC reset. This did not fix the problem.
I tried an NVRAM/PRAM reset. This did not fix the problem.
I read on a related thread...
https://discussions.apple.com/thread/4150905?start=30&tstart=0
...that many Mountain Lion users have experienced the same issue.
I opened the Console to look for new messages appearing after inserting a DVD-ROM into the superdrive. No messages appeared while the superdrive whirred a few times and then ejected the DVD-ROM.
Apple have been made aware of the issue but no patch has been issued. Mountain Lion 10.8.2 is the current version with no updates available at the time of writing.
Some users with dual-boot systems have booted into Windows and their superdrive works fine. This points to a software issue with Mountain Lion. The problem appears to affect some systems and not others.
Other users have reported that their superdrive works again after downgrading to Lion or Snow Leopard.
I'm going to try booting ML into Safe Mode to see if the superdrive works. I'll then try downgrading to Lion or Snow Leopard to see if the superdrive works ok. That at least will confirm that it is a Mountain Lion upgrade related issue and not a superdrive hardware failure.
Then we will have to wait for a patch from Apple to resolve the issue so we can upgrade to ML without losing use of the optical drive!

Outlook (MS Office for MAC2011) appears to be using up to 67% of my CPU time even when I'm doing nothing. Also, immediately after installing Mountain Lion, log-ins to the OS and normal operations noticeably slowed. Suggestions?

After installing Mountain Lion, I experienced a noticeable reduction in performance. When I log-in, I must wait several seconds for the cursor to become effective in the log-in window. When I come out of standby mode, I have the same issue. Also, when looking at cpu usage, Outlook appears to be using up to 67% of cpu when not doing anything. I'm not happy with this result.
Does anyone have suggestions as to how to fix?

Uninstall Office and reinstall it
Use these instructions to do it and do not omit any of them.

HP Printer issue after installing Mountain Lion

Similar Messages

Maybe you are looking for