HP Printer not working in spite of all new inks and following all remedial instructions

I have followed every advice given but to no avail, including that given on the printer itself but I just cannot print from my Mac. Scanning straight from the printer is fine, but not from the computer. This problem only started today.
Over 80 and cannot think what else to do! Please can you help? Thank you.
This question was solved.
View Solution.

Thanks for letting me know that you are now able to print but you can't copy, Sirodyam.
We are getting there. I think you are doing just fine.
I have provided a few more steps you can try if you like, for the printing being faint and not being able to copy.
Are you using Genuine HP Cartridges?
I would do a hard reset to see if that will resolve the issue for not being able to copy.
Leave the printer on and unplug the power cable from the printer and wall outlet for 60 seconds.
Then reconnect the power cable to the printer and wall outlet rather than a surge protector.
This ensures the printer is receiving full power and may help this situation.
I have provided this document with some steps to try, to see if it will resolve the issue.
Fixing Print Quality Problems for the HP Photosmart Wireless e-All-in-One Printer Series (B110).
Check the driver name that is installed for the printer. Make sure it shows just the printer's name.
Click the Apple menu and then click System Preferences. Click Printers & Scanners, highlight the printer name on the left side and on the right side of the screen it should show the printer's name. (Photosmart B110a)
If the full printer name isn't listed correctly, delete it and add the printer name back in from the list. Click the - sign to delete the driver and then click the + sign to add the driver, might have to click the drop down to select the printer's name to add it in.
Try printing and copying again.
Please let me know the outcome.
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Similar Messages

I upgraded to OS X10.9.4 and now my Cannon scanner will not work. I downloaded the new driver and still no luck.

I upgraded to OS X10.9.4 and now my Cannon MX 860 scanner will not work. The printer works. I downloaded the new driver and still no luck. Please help!

Open Print & Scan preferences. Select the printer in the sidebar list and click on the Delete [-] button. CTRL- or RIGHT-click in the sidebar area and select Reset Print System from the context menu. Re-Add the printer by clicking on the Add [+] button, select your printer from the little browser that opens, select the proper driver if it isn't set automatically, then click on the Add button. See if it now works.
Oh, be sure you install the new driver you downloaded.
BTW, you don't have a PowerMac as shown in your profile. PowerMacs were tower machines that ran PPC processors, not Intel processors. You really should correct that information in your profile.

When trying to PDF a webpage into a PDF, it does not work, I go through all the steps as normal, and It does nothing. I can repeat my action, where instead of "printing" to adobe, it saves the file, which it doesn't save it at all. I can't even find the o

When trying to PDF a webpage into a PDF, it does not work, I go through all the steps as normal, and It does nothing. I can repeat my action, where instead of "printing" to adobe, it saves the file, which it doesn't save it at all. I can't even find the original in my work folder. I need to know how to stop this from happeing and get it back to the way it has been working he last 6 months since i purchased this program.

Hi pissedadobeuser,
Does this issue occur with any particular web page?
Are you able to print the webpage to 'Adobe PDF' to convert it to pdf.
Which Browser version, OS version and Acrobat version are you using?
Regards,
Rave

HP LaserJet P1005 Two-sided printing not working on network

Good day!
I have a desktop, with Windowx XP, to which my LaserJet P1005 is connected via USB. My wife has a laptop, with the same Windows XP, from which she can print, but the two-sided option does not work right. She can check it and print, but the window to restart printing for the second side does not open and there is nothing we can do at this point.
I have trie duninstalling the printer from both computers and reinstalling the newest drivers, it still won't work.
Thanks for your help!

I have an HP PhotoSmart 2575 All-in-One with the latest HP driver that displays the two-sided printing option greyed-out in the Layout window. According to HP, your printer must be capable of accepting an optional two-sided printer tray to work on a Mac. To me that is ludicrous since in Windows the driver supports manual two-sided printing.
To get around this, I select the Paper Handling window and from the Pages to Print drop-down list select Odd only instead of the default All Pages. After clicking the print button the odd pages print starting with the last page and ending with the first. I then remove all paper and reinsert the printed pages with the top of the page facing the printer. First, though, I reorder the pages with the first page on the bottom and the last page on top. If the total number of pages is an odd number, I remove the last page from the inserted stack, as that is the very last printed page. I then select Even only from the Pages to Print drop-down list and click print again.
Problem solved.

File- Print not working from SQL Developer 1.2.1 Build MAIN-32.13

File->Print not working from SQL Developer 1.2.1 Build MAIN-32.13.
I downloaded sqldeveloper-1.2.1.3213.ZIP and extract to a local directory. From the extracted directory I ran ..\sqldeveloper\sqldeveloper.exe from Windows XP sp2. The program itself seems to run just fine but File-Print doesn't do anything. In Help-About, Java Platform is reported as 1.5.0_06 and Oracle IDE is 1.2.1.3213. I'm not sure where to look for what is causing the problem.
Thanks

I hadn't tried CTRL-P before but I did today. On the first attempt, I saw a small jump in the memory usage for sqldeveloper.exe as reported in Windows Task Manager. Otherwise, there was no change. A second CTRL-P in the same session produced a further bump but subsequent attempts in the same session produced no further change in CPU or Memory Usage.
Using Task Manager to monitor this further, I tried File->Print again and saw that sqldeveloper would periodically climb to 1 or 2 percent CPU and consume a little more memory. After a minute or so, though, all activity stops again.
I do not get a print dialog box from SQLDeveloper using either CTRL-P or File->Print

Wireless printer not working after 10.5 upgrade

My Canon All-in one MP600 was working fine using 10.4.11 and Airport Extreme Base Station. I upgraded to 10.5.4 and now the printer does not work. I checked the Airport utility and the printer shows under printer. The printer works fine on my wife's MacBook. The old printer setup utility app is not present on 10.5. Am I missing something? I followed the instructions to install the wireless printer but it still does not work. It works fine when I use the USB cable directly to my powerbook G4.

Found problem. Removed printer from Sys Prefs -> Printers and Fax and re-installed it. Works now.

Is there a way to separate raw files from jpegs that are in one folder after downloading from camera when you shoot both together. I tried arrange or sort by kind but that does not work. It arranges all folders but not the files in the folder., Is there

Is there a way to separate raw files from jpegs that are in one folder after downloading from camera when you shoot both together. I tried arrange or sort by kind but that does not work. It arranges all folders but not the files in the folder., Is there a way to separate raw files from jpegs that are in one folder after downloading from camera when you shoot both together. I tried arrange or sort by kind but that does not work. It arranges all folders but not the files in the folder.

Bridge will do the job. View > Sort > ByType. Then you can choose a group of one type and put the files in a separate folder.

HP Laserjet 1320 attention light on, printer not working.

I checked for paper jam, reseated printer cartridge, removed and reinserted printer and line cord plugs. Turned printer on and off. Attention light remains on and printer not working.

Hi Robert8695,
Let's manage one issue at a time. Regarding the error "unable to establish a two-way connection with the device", check out the link below for troubleshooting you can do to resolve it:
http://goo.gl/u3Snr
Let me know what happens and if the other problems persist as well.
If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

Printer not working following iPad uodate

Printer not working following iPad upgrade

Hi,
Is the printer not mechanically working or are you having a problem with printing wirelessly from your device? Was the upgrade to the ipad software or did you get a new ipad?
Try restarting your apple device - It's a simple fix that sometimes helps re-establish the connection to the printer.
Other things to check would be that there have been no recent changes to the wifi password.
"Although I work for HP, I'm speaking for myself and not on behalf of HP"
"Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

I have a 27" thunderbolt display NOT the iMac, and I'm trying to connect my xbox 360 to it via the Belkin AV360. I plug everything in and it does not work? I check all the power cables and and connections and still not he issue. Iv'e tried C-F2 also. Help

I have a 27" thunderbolt display NOT the iMac, and I'm trying to connect my xbox 360 to it via the Belkin AV360. I plug everything in and it does not work? I check all the power cables and and connections and still not he issue. Iv'e tried C-F2 also. has anyone used this devive (AV360) on there own 27" thunderbolt display (not the imac) and gotten it to work? If so I'd appreciate the help.

There are multiple reasons that lead to issue. You should read the troubleshooting guide to get the right solution to solve the issue: iPhone, iPad, or iPod touch not recognized in iTunes for Windows - Apple Support

I have CS5 and a d-600. I would like to use camera raw but not working. I downloaded CR 7.3 and still not working. Do I need to upgrade to CS6 ..or just throw it all out the window and get rid of my d-600 ?

I have CS5 and a d-600. I would like to use camera raw but not working. I downloaded CR 7.3 and still not working. Do I need to upgrade to CS6 ..or just throw it all out the window and get rid of my d-600 ?

it allows you to use your cr files, Adobe - Adobe Camera Raw and DNG Converter : For Windows
Camera Raw: How to use Adobe DNG Converter - YouTube

I am having trouble printing a PDF document. Whenever I click print nothing happens but when I am printing documents from Word, Excel etc they print without a problem. I've tried printing as image but that did not work. I uninstalled Adobe Reader XI and d

I am having trouble printing a PDF document. Whenever I click print nothing happens but when I am printing documents from Word, Excel etc they print without a problem. I've tried printing as image but that did not work. I uninstalled Adobe Reader XI and downloaded Adobe Reader X instead and that still doesn't work. I have Windows 7.

Hello,
Please follow the link to troubleshoot the printing issues with Adobe Reader:- Troubleshoot PDF printing | Acrobat, Reader.
Regards,
Nakul

Adobe Flash Player not working. Installen latest version. Get the following: "This website would like to run the following addon: Adobe Flash Player from Adobe System Incorporated." Then asking me to allow it for current or all websites. It doesn´t matter

Adobe Flash Player not working. Installen latest version. Get the following: "This website would like to run the following addon: Adobe Flash Player from Adobe System Incorporated." Then asking me to allow it for current or all websites. It doesn´t matter how i do this. The pop-up question returns EVERY time. What do i do to solve this issue???

To give you any useful advice, I'm going to need to know more about your computer and browser:
https://forums.adobe.com/message/5249945#5249945

TS3391 iMovie 11 is not working. I try to open it and it says it is generating thumbnails for one of my previous projects. All the commands are gray. I have to force it to quit. I just want to capture clips to start a new project.

iMovie 11 is not working. I try to open it and it says it is generating thumbnails for one of my previous projects. All the commands are gray. I have to force it to quit. I just want to capture clips to start a new project. I googled the problem and there were discussions about deleting files in various folders and renaming clip extensions. I don't like the solutions I saw there and I am not sure they will work.

Nobody replied so I called Apple. They seemed to think they could fix the problem but I had to agree to pay about $20 first. I told them to put it down as a complaint. I only want to use the software I bought. I can't see that it is my fault it is malfunctioning. I guess I will have to pay. It doesn't seem right.

TS1702 How do I get a refund for an app that did not work/deliver well at all?

How do I get a refund for an app that did not work/deliver well at all?

You may not get a refund, but you can try contacting itunes support and asking.
Click Support at the top of the page, then click the link under Contact Apple Support.

HP Printer not working in spite of all new inks and following all remedial instructions

Similar Messages

Maybe you are looking for