HP printer passcode not accepted by facebook

I'm trying to send a photo to facebook and the printer passcode is not being accepted by Facebook...anyone else haveing this problem???

Hi there, what printer do you have?
Best
If my reply helped you, feel free to click on the Kudos button (hover over the "thumbs up").
If my reply solved your problem please click on the Accepted Solution button so other Forum users may benefit from viewing the post.
I am an HP employee.

Similar Messages

Why am I getting print file not accepted?

I'm using a HP LaserjetP1102W
Print file not accepted? No idea why?
It's been saying Printer Not Connected.
I'm using Safari and would like to print coupons.
Hope this is the right place to post this.
Thanks!

Hello lostvalleyfarm,
It sounds like you are not able to print to your HP Laserjet. I recommend following these steps to troubleshoot the issue you are experiencing:
Follow these steps until the issue is addressed:
Make sure that the printer is powered on, has ink / toner, and that there are no alerts on the printer’s control panel. Note: If you cannot clear an alert on the printer's control panel, stop here and check the printer's documentation or contact the manufacturer for support.
Ensure the printer is properly connected to a USB port on the Mac or AirPort base station / Time Capsule. If the printer is a network-capable printer, make sure that it is properly connected to your home network.
Use Software Update to find and install the latest available updates. If an update is installed, see if the issue persists.
Open the Print & Scan pane or Print & Fax (Snow Leopard) pane in System Preferences.
Delete the affected printer, then add the printer again.
If the issue persists, try these additional steps:
Reset the printing system, then add the printer again.
If the issue still persists, reset the printing system again. Download and install your printer's drivers. Then, add the printer again.
Contact the printer vendor or visit their website for further assistance.
You can find the full article here:
Troubleshooting printer issues in OS X
http://support.apple.com/kb/ts3147
Thank you for using Apple Support Communities.
Best,
Sheila M.

HP 7410 Printer will not accept a 12 digit WEP/WPA2

I just got a new FIOS router. It has an "ESSID" (extended SSID) which has 12 hex digits for the WEP/WPA2, instead of the 10 that the old SSID had. HP 7410 printer set-up will not accept 12 digits, only 10 or 26 is the warning message. I cannot get the printer on my home wireless network now. I have several laptops which I had set up for wireless access with the old router which had a lot of problems - Win 7, Win 8 and Vista, which is why Verizon sent me the upgraded router. I reset the HP 7410 to factory settings, powered down and unplugged for 15 seconds, and held down the #6 on power up. Still no luck. Is there any way to force the printer to accept 12 hex digits for the WEP/WPA2?

What router brand/model?
Try restarting the router just before trying to connect the printer.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Restrictions Passcode not accepted!

My password and restrictions passcode have always been the same. My passcode is accepted; however, my restrictions passcode won't accept and as has classed me as having 13 failed passcode attempts. When I try to erase all contents and settings or even just reset all settings, it goes back to the code screen and wants me to enter the code! Anyone know how to fix this? If I do a full recovery to new phone status, will my backup on icloud or my itunes replace all my apps & contacts, or will I have to start fresh? Is there an easier way to eliminate the restrictions passcode without losing everything? My phone, email and contacts are all used for work, so it's very important that I don't lose any info. I will admit that I am not an expert to computer operations or apparently my cellphone, so please, simple and easy explanations and instructions would be great thanks!

Just restore the whole thing then try again

Mac won't print; says print file not accepted

My macbook pro won't print to a new wireless printer that I have; no matter what kind of file I'm printing (doc, pdf, jpg, etc), it says that the print file is not accepted. I've even used a usb cable to connect it directly to the printer and it still won't print; My computer recognizes the wireless printer, but does not print to the printer; It does however print to another printer that I have wirelessly, just not the new one. Any ideas on what I can do to make this work? I've even called Epson (new printer) and they can't figure it out...

Does another computer print to the new printer? You can try resetting the printing system Mac OS X: How to reset the printing system but I would suspect that the new printer may be faulty.

Hp envy 4501 Printer will not accept my e-mail password

I am trying to print from e-mail but the ePrint will not accept my gmail password.

Hi @Beckyl
Welcome to the HP Support Forums. I see that you would like to add your Gmail account to the HP ePrint app.
Please try using the settings below to add your Gmail account to the HP ePrint app. Please note that you will need to have two-step verification turned off. If you are unsure how to do this, please follow the steps in Google’s Turn off 2-Step Verification document.
POP Settings
Email:          your personal @gmail.com email address
Description:    can be whatever description you prefer, it can be something as simple as ‘GMail’
Password:      this is the password you use to log into your GMail email account. It is important to exactly enter the password as you set it up including capital letters and special characters.
Host Name:      pop.gmail.com
Port:           995
SSL:            On
Please let me know how things turn out.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Printer will not accept memory stick

I have a new Photosmart B210a. The card reader will not accept a memory stick. Is there something that I need to remove? Is there an aligment issue wit m/b and case? thanks

Which of the following are you trying to use?
Memory Stick Pro Duo (adapter optional)
Memory Stick Pro-HG Duo (adapter optional)
MultiMediaCard (MMC)
MMC Plus
Secure MultiMedia Card
MMC Mobile (RS-MMC; adapter required)
Secure Digital (SD)
Secure Digital Mini (adapter required)
Secure Digital High Capacity (SDHC)
TransFlash MicroSD Card (adapter required)
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

R12: PO Print report not accepting custom layout

Hi All,
PO Print report is not picking up the custom layout in R12.
We have developed a custom layour ( .rtf).It works fine when run as a concurrent program.
But if we follow the standard navigations ( Inquire/View document ) generates the standard report only.
If any body has worked on similar type of issue anytime please let me know.
Thanks in advance.
Regards,
Baldeep
9880054721
[email protected]

We are using r12-12.1.1.
Still this bug is not rectified(6806428). Oracle has taken up new Enhancement request 9264442.
Funny that it will rectified in next version .
This db flaw in india localization which doest allow to pick sum of each taxes.
Edited by: |SN| on Jan 21, 2010 10:46 PM

With a new iMac i can't print wirelessly to my existing HP or Epson printers. They currently work thru wireless network with my windows desktop. Both printers get the same error: printing job not accepted. They appear ro be recognized by the Mac. Help!

I've looked at many threads and tried suggestions from this site with no success. Neither printer (HP 1010 and Epson Artisan 810) are Airprint supported. in checking the printers via the imac in System Preferences the printer 'kind' is listed as Airprint. I've tried to change with no success. So yes- I need some experts help and suggestions!

Hello HappyHips,
It sounds like you are getting this error message when trying to print to a Wi-Fi printer. I want to recommend the troubleshooting in this article named:
Troubleshooting printer issues in OS X
http://support.apple.com/kb/TS3147
Make sure that the printer is powered on, has ink / toner, and that there are no alerts on the printer’s control panel. Note: If you cannot clear an alert on the printer's control panel, stop here and check the printer's documentation or contact the manufacturer for support.
Ensure the printer is properly connected to a USB port on the Mac or AirPort base station / Time Capsule. If the printer is a network-capable printer, make sure that it is properly connected to your home network.
Use Software Update to find and install the latest available updates. If an update is installed, see if the issue persists.
Open the Print & Scan pane or Print & Fax (Snow Leopard) pane in System Preferences.
Delete the affected printer, then add the printer again.
If the issue persists, try these additional steps:
Reset the printing system, then add the printer again.
If the issue still persists, reset the printing system again. Download and install your printer's drivers. Then, add the printer again.
Contact the printer vendor or visit their website for further assistance.
Thank you for using Apple Support Communities.
Regards,
Sterling

After disabling Autolock and trying to disable Passcode Authentification, iPad continues to ask for a passcode, but old passcode not accepted

I wanted to turn off Autolock and Passcode Authentification.
I set Autolock to "never."
Then, I set Autolock after Replacing Smart Cover to "off."
Finally, I tried to turn off Passcode Authentification. My iPad asked for my passcode. I entered it, but my iPad wouln't take it and asked me to re-enter it; perhaps my finger had slipped. So I entered my passcode again -- and this time correctly, I'm nearly certain. Still my iPad wouldn't take it and asked me to re-enter it.
Not thinking I could have changed my passcode (and how could I have if, according my iPad, I never entered my old one correctly?), I let my iPad go into Sleep mode and returned to work on something else.
And now I can't unlock my iPad. I put in my passcode, and the thing won't take it. Disabled for 60 minutes at this point.

Hmm, I did receive an email saying that the thread was deleted, but did not explain why for some reason. It sounds like the Level 7 guy caused this. I will call Apple tomorrow to find out who is responsible. And see if I can lodge a complaint against that user. Maybe it was because of what the Level 7 guy was saying.
There was useful information posted in that threat that addressed the issue that I am experiencing. I will try to reiterate from the apple website, it says.
Recovery mode
If you've never synced your device with iTunes, or haven't set up Find My iPhone, you'll need to put your device in recovery mode. Then you'll restore your device as new or from a backup.
This will erase the device and its passcode.
Disconnect all cables from your device.
Hold down the Sleep/Wake button, then "slide to power off" to turn off your device.
Press and hold the Home button and plug the device into your computer. If your device doesn't turn on automatically, turn it on. Don't release the Home button.
Continue holding the Home button until you see the Connect to iTunes screen.
If iTunes doesn't open automatically, open it. iTunes will alert you that it has detected a device in recovery mode.
Click OK. Then restore the device.
If your device doesn't go into recovery mode, try steps 1–4 again.
They suggested that I try this over again until it works. It did not work for me the first time.

My new printer will not accept the print command ???

Please help me get this new printer to work.

What ADOBE program are you using?
Oh... the Cloud is not supported on WinXP, so it would seem that you do not have an Adobe problem, you have a printer or WinXP problem
You need to check support for your printer, at the printer site

HP 8250 stand alone printer will not accept 16GB SD camera card.

The message reads "Card access error." The printer works fine with 256MB SD card from same camera. The 16MB card works fine on my HP Photosmart Premium C309 printer. Does the 8250 have an SD card size limitation?
This question was solved.
View Solution.

Hi,
The printer do have SD Card limitations, as the specific model is quite older and uses earlier technologies..
As you may find by the product specification, the Maximum size is 1 GB
Four memory card slots: CF I and II, IBM Micro drive, Secure Digital/MM card, xD-Picture card, Sony Memory Stick, maximum size 1 GB
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00386656&cc=us&dlc=en&lang=en&lc=en&product=443...
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

The printer will not accept my printer email address. what do i do

ph offficejet 6500A plus

Hello jesrhs,
If you are trying to enable Web Services and register your printer on http://www.eprintcenter.com, you should be able to add the printer code to your account.
If this code is coming back as invalid, you may need to remove/disable Web Services (some printers say "Restore Factory Settings") under the Setup > Web Services Menu > Restore Factory Settings.
After doing this, go back to Setup > Web Services Menu and follow the prompts enable Web Services again. After doing this you should have a new sheet that prints with "HP ePrint mobile printing" as the title and a new printer code under step 2.
If you have any other questions reply to this post and I will try to find an answer for you.
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP.

Issue with HP 4225 officejet , Not accepting New Print Cartridge

dear Sir,
My HP officejet 4225 all in one is not accepting the New cartridge ( black 27b). From last few days i am experincing horrible things in printer which i m not able to understand, like from two three days it takes 15 minutes to print one page.
it starts printing ,prints one line and stop, wait for 1 min again prints few lines again become silent.in this way it takes 10 mins to print one normal page.
Yesterday it starts displaying error message "Remove and check right cartridge".I checked it ,cleaned the surface of black catridge (27b)but nothing happen.i installed an old empty catrdige (27b) it started working again. i replaced it with the existing cartridge it displays the same message.
Today I bought a new cartridge ( 27b) after instaaling it again display the same error message. I replaced with another very old cartridge (27) it again works ,it just displays black cartridge Empty.
now i m surprised a running printer suddenly not accepting the installed cartridge. accepting the old cartridges not accepting new cartridge.
one more thing the speed of printing has become normal after this incidence. I did a facory reset two days ago to check wether speed of printing improves or not? but it didnot improved however with the issue of cartridges ,when using old crtrdige (27b, 27) using only colour printout the printing speed is ok. i,e it does not start and stop.
pls help with this issue . i m totally stuck.
Thanking you,
Rahul Vijay

Oh, I don't think you are stuck with USB. From your post above:
When I select network, I get three options:
View Network settings
Restore Network Defaults
Advanced
With the Ethernet unplugged, select the middle one. Then reset your router by removing its power for a few seconds, then plug back in. Turn the printer off then back on.
Finally, plug in the Ethernet cable.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

This is about iPhoto: I need to print the FULL IMAGE as shown on the screen: the image is SQUARE (equal on four sides). iPhoto keeps cropping it into a rectangle - THIS IS NOT ACCEPTABLE! How do I get what I see on the screen in print form???

I need to print the FULL image as shown on the screen - the image is SQUARE (equal on all four sides). iPhoto keeps cropping it into a rectangle - this is not acceptable! How do I get what I see on the screen into print form?

Like Terence explained:
OT

HP printer passcode not accepted by facebook

Similar Messages

Maybe you are looking for