HP Printer (pcs 1401 AIO) problem, of sorts
Hi; I have the 1401 AIO from HP, which works fairly on my imac running Tiger, 10.4.10, but i have an unusual issue. I need to stop it from prining a test sheet every time I turn it on. Is there a way to do this? I have the latest drivers, and always leave my printer turned on, but my cat has become very fond of it, as it sits by me on my desk (printer and cat alike), and she plays with the buttons on a daily basis, and keeps turning it off and on, wasting lots of ink. Anyone, if you know of a way to turn off the test printing upon turning on the printer, please post! thank you in advance.
Hi; I have the 1401 AIO from HP, which works fairly on my imac running Tiger, 10.4.10, but i have an unusual issue. I need to stop it from prining a test sheet every time I turn it on. Is there a way to do this? I have the latest drivers, and always leave my printer turned on, but my cat has become very fond of it, as it sits by me on my desk (printer and cat alike), and she plays with the buttons on a daily basis, and keeps turning it off and on, wasting lots of ink. Anyone, if you know of a way to turn off the test printing upon turning on the printer, please post! thank you in advance.
Similar Messages
-
When I want to print from the app I choose photos
and the I get all my photos but I get the oldest ones
first and I have to scroll all the way to the bottom
to get the newest photos. I have ca 3000 photos
so it's boring to have to scoll down every time.
In the photo file on ipad/iphone you get
the newest photoes first.
Is it possible to get the newest photos first in
the Printer app (hp aio remote)?Hi @Johannesnorway,
Welcome to the HP Support Forums. I understand that you would like to change the sort order of your photos in the HP All-in-One Printer Remote app.
There currently is not a way to change the sort order. I have included the HP ePrintCenter Submit New Idea page if you choose to submit your idea.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP -
My iPad does not find the printer. I have tried the HP app and it works, but in any other app the printer is not seen. How do I get this printer visible to the iPad. All my other network computers find and print with out a problem.
hi
could you tell us what the other app is please -
WIndows 8.1 printer error: windows cannot print due to a problem with the current printer set up
My HP OFFICEJET 8500 PRO was working just fine wirelessly until I installed the Windows 8.1 update from the Microsoft. Now I cannot print at all. I get an error that says, "windows cannot print due to a problem with the current printer set up". I have tried reinstalling and a ton of other solutions to no avail. Can someone PLEASE Help!
Hello there, @jesseangelique ,
Welcome to the Community!
I would love to help you with the printing issue you're having, since the Windows 8.1 that was done.
Please run the Print and Scan Doctor. Write me back with the results or post a screen shot of the results and I will have a look at them.
This diagnostic tool will check for any conflicts that could be causing the issue. The tool will show you a report at the end. If there was a problem that the tool could not fix, you will notice it in the results.
Also, let me know which Officejet 8500 Model you have:
HP Officejet Pro 8500 All-in-One Printer - A909a
HP Officejet Pro 8500 All-in-One Printer - A909b
HP Officejet Pro 8500 Premier All-in-One Printer - A909n
HP Officejet Pro 8500 Wireless All-in-One Printer - A909g
Hope to hear from you!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution! -
HP Laserjet P1008 printer is having many problems
The Printer has the following problems: 1) HP Claims that in single cartridge (Toner) 1500 pages should be printed but in actual it only prints 900-1000 Pages in one Toner. 2) Dull Printing is observed in the middle part of paper. 3) Tooks about 1-2 minutes to take Papers from TRAY(While Printing multiple Papers) 4) Printer Roller Rolls continuously and printer is not switched off from Power Button Provided in Printer. System Officer, Allahabad District Court
I'm glad you finally succeeded. Your post was one I looked at trying to solve the same problem. But the drivers weren't visible for me after rebooting.
I spent 2 days trying to make my LJ 2100 TN work with OS 10.8.2. The kicker was that when I tried to add the printer to my existing [ethernet] network with my new iMac on Wi-Fi it killed the existing network. No computer could now print! I could still get on-line though.
I did a lot of research on the net; I called my ISP and did learn how to get the IP numbers on each device; I called Mac Tec, they passed the buck, saying because I wasn't using a Mac router they couldn't help.
This post is for others that can't see the drivers they just downloaded. I solved my problem today:
When I tried to add the printer to 'Print & Scan' the 'Add' window comes up; and even though I made the 2.12 download, there were no print drivers to be seen. Apple in it's infinite wisdom left out the 'Advanced' icon in the 'Add' window! Right click the header and add it. Now there is a function to actually search for the print drivers.
You will have to choose 'Type'. I tried a few but 'Jetdirect' worked best for me. NOTE: your printer should be on before you make your choices in the 'Add' window.
Add your printer's IP number in the 'URL' field.
In the 'Use' field, select your proper print driver.
If you did it all correctly, the 'Add' button will light up and hopefully add a new printer to the 'Print & Scan' window.
Good luck. [I also had the delete and replace the printer on my other 2 computers in the network to make them able to print again.] -
Just bought a new iMac, with Lion, for my wife. When is was wifi with her old iMac on line with it's printer, HP C6200, no problems printing. Now that it is by itself it does not recognize the C6200...It recognizes my laser hp 1012 and laser hp 6300 but will not print to them wanting an autenication
How is the C6200 connected to the iMac, is it via USB or Wi-Fi? If it's via Wi-Fi please make sure it's connected to the router using the printer's Network Wizard. Then click System Preferences - Print & Scan and assuming the iMac is on the same network as the printer, if it is the printer should be seen. If it's not then click the + sign and add the printer. Apple provides instructions in Printing Overview OS X Lion
-
Problem with sorting involving user defined types and reports
Hello!
I have a problem with sorting involving Reports and user defined objet types.
I have created the following object types
CREATE TYPE type_balance_compte AS OBJECT
NUM_CPT_SEQ NUMBER(8)
,NUM_CPT VARCHAR2(35)
CREATE TYPE TB_type_balance_compte IS TABLE OF type_balance_compte
At the reports query I use:
SELECT ...
FROM table(cast(test_pkg.balance_comptes(:P_num_soc) as TB_type_balance_compte)) c
The procedure balance_comptes will retrieve data from various tables into the type.
The report is ordered by a certain string field that usually contains characters and numbers.
I need to have numbers always before characters, meaning the data should come in this order in the report for example:
0
1
A
B
So, before the report query, I have placed a call to DBMS_SESSION.SET_NLS( 'nls_sort', 'binary' ) to guarantee NLS_SORT in case it is originally set to FRENCH.
The problem here is that even after this call, I have the report ordered like this
A
B
0
1
And not the numbers before as it should be.
To try and find out where the problem was, I have created a table to use instead of the object type described above. In this case, it worked correctly. So all I know by now is that is has something to do with the type or cast, but what exactly? Does anybody now how to solve this without using a table?
Many thanks
AriadneI have placed a call to DBMS_SESSION.SET_NLS( 'nls_sort', 'binary' ) why not order directly then:
SQL> select *
from table (sys.dbms_debug_vc2coll ('A', 1, '5', 'C', 'a'))
order by nlssort (column_value, 'NLS_SORT = binary')
COLUMN_VALUE
1
5
A
C
a
5 rows selected.? -
unable to find appropriate driver for my mcbook air using a ricoh aficio mp36501SP network printer. had similar problem with another ricoh copier/printer, but was able to resolve that problem entering ip address. this one wants job code. i don't believe mac allows for input on job code or printer code for permission to print
I'm having similar problems with an HP OfficeJet 6500. One suggestion that improved the situation, but did not totally solve the problem, was to select "OfficeJet Pro L7700" for its drivers.
One other suggestion is to turn off the printer, then simultaneously hold down the "#" and "9" keys and turn the printer back on. This hot key seems to reset the printer to factory defaults, allowing you to set things up anew.
Finally, kvetch to HP. Their networking software clearly has problems in its relationship to OSX, but nobody on either side seems motivated to bring in a good therapist. -
Bonjour printing to HP AIO printer
While trying to get a pair of HP 3180 printers working, I found that I had to install DIFFERENT drivers for the one that was directly connected and one that was connected via Bonjour. If I used the wrong driver, I would get a 9672 error.
I am also trying to connect an HP PSC 1210xi on another network and I figured that the same problem would exist. I have the v4.3 AIO drivers working for the direct connect configuration but the print only drivers are not recognized over Bonjour, I get the 9672 error message.
Anybody got any words of wisdom?
- gwsWish I had a solution but I am having the same problem with an officejet 4225.
same error message. Funny thing is I have a crappy old dell that connects seamlessly over airport/bonjour to the printer but my new macbook pro won't print unless directly connected. love an answer to that? -
Print or download ALV report with sort options
Dear friends,
How i can download into excel or print ALV report with sort options, like customer name column with similar values should not repeat in the print out or download file.
Regards,
Praveen LoboHi Praveen,
Use this code, its working:-
*FOR SORTING DATA
DATA : it_sort TYPE slis_t_sortinfo_alv,
wa_sort TYPE slis_sortinfo_alv.
* SORT W.R.T. CUSTOMER NAME
wa_sort-spos = 1.
wa_sort-fieldname = 'NAME1'. "field customer name
wa_sort-tabname = 'IT_KNA1'. "internal table with records
wa_sort-up = 'X'.
APPEND wa_sort TO it_sort.
CLEAR wa_sort.
"this will sort the ALV o/p for customer with same name
"now the name will not be repeated
"records with same name will be grouped
* DISPLAY RECORDS IN ALV GRID
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = sy-repid "report id
it_fieldcat = it_field "field catalog
it_sort = it_sort "sort info
TABLES
t_outtab = it_kna1 "internal table
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
ENDIF.
Hope this solves your problem.
Thanks & Regards,
Tarun Gambhir
Edited by: Tarun Gambhir on Dec 31, 2008 1:13 PM -
Another usb printer-to-Airport Extreme problem
This issue is similar to Tanya Howie's, but involves an HP 5440 printer instead of a Pixma. I have the G4 iBook connecting via Airport to the Airport Extreme, the iMac Snowball hardwired to the AE via Ethernet cable, with the HP plugged in via usb to the AE. I have reinstalled the AE software 7.4.2, the HP software 5.3, and the Airport utility 5.4.2. Also, I connect to the internet via RoadRunner thru Warner Cable.
Occasional disconnects have been cured by resetting everything back up, until recently. Now, when I look at all the places where the printer should appear, I see it listed: in the Airport Utility settings, on the printer setup utility, the File dropdown Print command, in the dropdown Printer box and choosing Bonjour version of the HP, even in the Opening Connection box, which shows the attempt at opening the connection; the connection bar shows an attempted Print, then goes to Job Stopped.
When I run the Print Diagnostics that is in the HP 5440 menu bar, I get a green light on Airport, Airport Settings, Network Settings, ISP, and Internet, but a red light on Server, which also says Failed. If I click Continue and go thru the steps of the diagnostics, the last page says "Cannot connect to server: Networks Diagnostics was able to connect to the Internet, but not to the server 'HP Deskjet 5440 printer.riousbprint.tcp.local' . This could be caused by problems with the server, or an Internet problem between this computer and the server."
Where is this server, and can someone tell me how to address its issues or to find a work-around? And is there a step I have missed? Thanks!I rolled back to 7.4.1 to try to fix my dropouts and slowdown problems, but that didn't make any difference. So I went back up to 7.4.2, but did the hard reset by
1. unplug Airport Extreme
2. Press in reset button on the back and hold it in while...
3. Plug in power
4. After light on the front started to flash, released the reset button
I then had to reset all the networking settings (password, SSID, etc) but that only took a few minutes and a couple of resets. The network dropouts haven't happened again so I'm hoping that has sorted it. The printers seem to be behaving themselves as well now. I did roll back to 7.3.2 at one point, but then I lost the printers completely with that and Snow Leopard (Leopard was fine though).
There was a posting I found from somewhere that said about setting up the printer using the IP connection setting rather than the automatic one, but I can't remember where I found that. Let me have a quick think...
Ok, I think this was the page (the instructions are very similar anyway)
http://pcworld.about.com/od/networkin1/Bugs-amp-Fixes-Ethernet-net.htm
Good luck. -
Problems with sort, search and write objects o an ArrayList
Hi
Lets say that i have two subclasses (the program is not finished so in the end it can be up to 34 classes) of an abstract superclass. I also got one class which basicly is a register in which i've created an ArrayList of the type <abstractClass>. This means that i store the two subclasses in the arrayList. no problems so far i think (at least eclipse doesn't mind).
1. now, i want to be able to sort the arrayList aswell as search thorugh it. I've tried Collections.sort(arrayList) but it doesn't work. So i have no idea how to solve that.
2.The search-method i made doesn't work as good as i hoped for either. I ask the user to first decide what to search for (choose subclass) and then input the same properties as the subclass we search for. I create a new object of the subclass with these inputs and try arrayList.contains(subClassObject)
it runs but it returns +"false"+ even if i create an object with the exact same properties.
3. If i want to write this arrayList to a txtFile so i can import it another time. Which is the best method? first i just thought i'd convert the arrayList to string and then print every single object to a textfile as strings. that worked but i have no good idea how to import that into the same arrayList later. Then i found ObjectOutputStream and import using inputStream.nextObject(). But that doesn't work :(
Any ideas?
Thank you!
Antonlavalampan wrote:
Hi
Lets say that i have two subclasses (the program is not finished so in the end it can be up to 34 classes) of an abstract superclass. I also got one class which basicly is a register in which i've created an ArrayList of the type <abstractClass>. This means that i store the two subclasses in the arrayList. no problems so far i think (at least eclipse doesn't mind).
1. now, i want to be able to sort the arrayList aswell as search thorugh it. I've tried Collections.sort(arrayList) but it doesn't work. So i have no idea how to solve that. Create a custom comparator.
>
2.The search-method i made doesn't work as good as i hoped for either. I ask the user to first decide what to search for (choose subclass) and then input the same properties as the subclass we search for. I create a new object of the subclass with these inputs and try arrayList.contains(subClassObject)
it runs but it returns +"false"+ even if i create an object with the exact same properties.Implement hashCode and equals.
>
3. If i want to write this arrayList to a txtFile so i can import it another time. Which is the best method? first i just thought i'd convert the arrayList to string and then print every single object to a textfile as strings. that worked but i have no good idea how to import that into the same arrayList later. Then i found ObjectOutputStream and import using inputStream.nextObject(). But that doesn't work :(Depends on what your requirement is, but yes, Serialization might work for you. Your classes should in that case implement Serializable.
Kaj -
Hi Gurus,
I have this problem, I am trying to sort a internal table with the syntax after endselect statement and before read table statement
SORT ITAB_SBOOK BY NAME
name is a field in the table of type CHAR length 25 in actual table and here is how i am declaring name
in internal table
name LIKE stravelag-name
but the sort statement is not executing properly, names are being printed on the screen but they are not
being formated.
can some one tell me whare am i wrong ?
thanks.
Moderator Message: Please use more descriptive subject line in future post.
Edited by: Suhas Saha on Dec 25, 2011 7:55 PMHi
as per my knowledge there is slight diff between type and like keywords
type key refer the data type of a field where as like key refer the reference of existing internal table in this just refer the data types not content(data)
example:
types:BEGIN OF ty_itab,
matnr type mara-matnr,
matkl type mara-matkl,
mbrsh type mara-mbrsh,
ersda type mara-ersda,
END OF ty_itab.
data:itab type STANDARD TABLE OF ty_itab.
data:wa_itab type ty_itab.
we want to create one more internal table with the existing structure at this time we will go through the like keyword.
jtab like itab occurs 10.
and also check the following code.
REPORT sort.
types:BEGIN OF ty_itab,
matnr type mara-matnr,
matkl type mara-matkl,
mbrsh type mara-mbrsh,
ersda type mara-ersda,
END OF ty_itab.
data:itab type STANDARD TABLE OF ty_itab.
data:wa_itab type ty_itab.
select matnr matkl mbrsh ersda from mara into wa_itab.
APPEND wa_itab to itab.
ENDSELECT.
SORT itab by mbrsh.
write:/ 'matno',' mat group','industry sector','created on'.
loop at itab into wa_itab.
write:/ wa_itab-matnr,wa_itab-matkl,wa_itab-mbrsh,wa_itab-ersda.
endloop.
best regards
sreenivas p -
New Mac Mini won't print on Kodak AIO 7
We bought a new Mini yesterday and I've already run into a problem. Although my Mac recognizes my Kodak AIO 7 printer and I've been able to wireless scan from it to the Mac, I can't print from the Mini to the AIO. I get an error message that says that it can't connect to the print.
It's odd and I haven't been able to find a fix. Suggestions?
Thanks in advance!Welcome to the Apple discussions.
Have you updated drivers and printer firmware from http://www.kodak.com/global/mul/service/downloads/DownloadLookup.jhtml?pq-path=1 3657/13660&product=EKN035329&operatingSystem=macos_x_10_6x (assuming your Kodak AIO 7 is the same as the Kodak ESP 7, which is an AIO) -
A Problem With Sorting via Applescript
Hello everyone. I have always lurked these forums and learnt many things along the way, but this is my first question, and I hope that someone can help me out. I apologise for the huge post.
I have created a spreadsheet in Numbers that I plan to use for a soccer tournament. There are 8 Groups of 4 teams in the competition, so I have set each Group up on its own sheet in order to record the results of the games. Group 1 is on Sheet 1, Group 2 is on Sheet 2 etc. These results are then fed into a second table on the each page in order to create a competition ladder for each group. So far so good, works beautifully. See image:
My next step is sorting these tables so that they form a proper "results table" with the best team on top. My wish is to sort the results table in this order:
Points
Diff
F
Although not very experienced with Applescript, I have written a script to sort all of the 8 sheets so that I don't have to do them one at a time. Unfortunately I find that every second sheet does not sort correctly, even though I am using the same instructions for each seet in my script.
See here, sheet two:
Sheet 3 sorts correctly but not sheet 4, sheet 5 is good but sheet 6 bad etc...
This is my script:
tell application "Numbers"
tell table "Ladder1" of sheet "Group1" of document "Manu"
sort by column "k" direction descending
end tell
tell table "Ladder1" of sheet "Group1" of document "Manu"
sort by column "i" direction descending
end tell
tell table "Ladder1" of sheet "Group1" of document "Manu"
sort by column "g" direction descending
end tell
tell table "Ladder2" of sheet "Group2" of document "Manu"
sort by column "k" direction descending
end tell
tell table "Ladder2" of sheet "Group2" of document "Manu"
sort by column "i" direction descending
end tell
tell table "Ladder2" of sheet "Group2" of document "Manu"
sort by column "g" direction descending
end tell
tell table "Ladder3" of sheet "Group3" of document "Manu"
sort by column "k" direction descending
end tell
tell table "Ladder3" of sheet "Group3" of document "Manu"
sort by column "i" direction descending
end tell
tell table "Ladder3" of sheet "Group3" of document "Manu"
sort by column "g" direction descending
end tell
tell table "Ladder4" of sheet "Group4" of document "Manu"
sort by column "k" direction descending
end tell
tell table "Ladder4" of sheet "Group4" of document "Manu"
sort by column "i" direction descending
end tell
tell table "Ladder4" of sheet "Group4" of document "Manu"
sort by column "g" direction descending
end tell
tell table "Ladder5" of sheet "Group5" of document "Manu"
sort by column "k" direction descending
end tell
tell table "Ladder5" of sheet "Group5" of document "Manu"
sort by column "i" direction descending
end tell
tell table "Ladder5" of sheet "Group5" of document "Manu"
sort by column "g" direction descending
end tell
tell table "Ladder6" of sheet "Group6" of document "Manu"
sort by column "k" direction descending
end tell
tell table "Ladder6" of sheet "Group6" of document "Manu"
sort by column "i" direction descending
end tell
tell table "Ladder6" of sheet "Group6" of document "Manu"
sort by column "g" direction descending
end tell
tell table "Ladder7" of sheet "Group7" of document "Manu"
sort by column "k" direction descending
end tell
tell table "Ladder7" of sheet "Group7" of document "Manu"
sort by column "i" direction descending
end tell
tell table "Ladder7" of sheet "Group7" of document "Manu"
sort by column "g" direction descending
end tell
tell table "Ladder8" of sheet "Group8" of document "Manu"
sort by column "k" direction descending
end tell
tell table "Ladder8" of sheet "Group8" of document "Manu"
sort by column "i" direction descending
end tell
tell table "Ladder8" of sheet "Group8" of document "Manu"
sort by column "g" direction descending
end tell
end tell
Can anybody see any obvious errors with the script? Any info would be greatly appreciated. Thanks!First I would look at some items to simplify the script:
I did NOT run this.
tell application "Numbers"
set LadderNumber to 1
repeat 8 times
set theLadder to "Ladder" & LadderNumber
set theGroup to "Group" & LadderNumber
tell table theLadder of sheet theGroup of document "Manu"
sort by column "k" direction descending
sort by column "i" direction descending
sort by column "g" direction descending
end tell
set LadderNumber to (LadderNumber + 1)
end repeat
end tell
I don't see a problem with the script. I suggest adding a dummy table to each sheet and confirming you can set a value in the dummy table from the script (maybe after manually setting the value to some default value). you can also add print dialogs at each step to see what's happening... like:
set aValue to <what ever>
display dialog "The value is: " & aValue
just some thoughts
Maybe you are looking for
-
Error while running Helloworld page from Jdeveloper
Hi I am getting the following error while running HelloworldPG.xml from Jdeveloper. Any help in this will be greatly appreciated .. Error Page Exception Details. oracle.apps.fnd.framework.OAException: Application: FND, Message Name: FND_GENERIC_MESSA
-
I have purchased adobe acrobat 10 standard ,but i want to downgrade to acrobat 9 standard,can be don
i have purchased adobe acrobat 10 standard ,but i want to downgrade to acrobat 9 standard,can be done or not?
-
- My computer does not communicate with icloud
-
Selct Options in Module Pool screen.......
Hi Gurus, We know the way to get the Select options on the Module -Pool screen as follows.... Create 2 separate fields in your screen layout - one for the low value and one for the high value. Insert an icon beside the high value which will call the
-
The OWB documentation tells you how to 'drive' objects - but is not clarify when to use them - or give examples of how to use So, can anybody tell me Why and when would I use: - a Mapping Input Parameter - a Mapping Output Parameter - an External Pro