HP Printer Wizard opens AMD Catalyst Install Manager to install HP Photosmart Basic Drivers

I upgraded to Windows 8 and want to install HP print and scan drivers for my Photosmart 7515e. However when I try, the wizard always wants to open the Catalyst Install Manager and reinstall that software. I don't understand why that should happen or why there may be a connection between printer drivers and CCC. Does anyone have an idea or answer? Thanks in advance.
This question was solved.
View Solution.

Could you link the driver install download you're trying to use that's causing this problem?
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Similar Messages

After I installed 10.6.8, my HP Officejet lost the ability to print 2-sided. I installed the latest HP drivers for Snow Leopard, but the 2-sided option is turned off and greyed out.

After I installed 10.6.8, my HP Officejet 7310 lost the ability to print 2-sided. I installed the latest HP drivers for Snow Leopard, the 2-sided option shows up in the print window but is turned off and greyed out. Also the scan function won't let me scan at any density greater than 150 dpi. I have talked to Applecare and to HP tech support and been told "too bad." Any help would be appreciated.

THANK YOU! And who are you? I spent a couple of hours on the phone with Applecare and with HP Tech Support and they couldn't fix what you did in a few words. Many thanks! John

AMD Catalyst Install

completed loading Windows 8 program but lost AMD Catalyst

Hey Robert,
You can download the Catalyst program off AMDs website. Here is a link to the download section on AMD: http://support.amd.com/us/gpudownload/Pages/index.aspx
There is a link on the right hand side for AMD Catalyst. Just pick if your using 64 or 32bit Windows.
Best of luck!
Sean
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Can't uninstall AMD Catalyst Install Manager

I'm trying to fully uninstall the drivers and Catalyst for my MSI R7870 series in hopes to reinstall and get the thing working correctly.
I run the uninstall manager through programs and features and get stopped with the following error message: "Windows cannot find 'C:\Program Files\ATI\CIM\BIN64\InstallManagerApp.exe'." Make sure you typed the name correctly, and then try again.
Anyone have any clue on how I can get this uninstaller to work correctly?

try >>Driver Fusion<< in Safe Mode
else try "full unistaller" or "your unistaller" to complete uninstall it [google for them]

Satellite L850 PSKACA: Win 8 AMD Catalyst Manager & Control Center instal

Satellite L850 PSKACA-03S011
Hi There
After installing Windows8 pro upgrade I have the following issue and not sure how to fix this
Was said I had to reinstall in windows 8
AMD CATALYST INSTALL MANAGER & ATI CATALYST CONTROL CENTRE
I need the info how to install these drivers AND LINK TO THE CORRECT DRIVERS TO DOWNLOAD
Please if someone can help
Tks Gill

Hmm it seems that just few Win 8 drivers are released for this unit.
Ive got another idea.
Win 8 supports and provides an own repair and fix options.
Here an useful and interesting information:
+Windows 8 Recovery & Repair+
http://aps2.toshiba-tro.de/kb0/TSB2A03ES0000R01.htm
There are different ways to recover or repair a PC which are:
1. Refresh
2. Reset
3. Recovering using a recovery media
4. System Image Recovery
5. System Restore
6. Automatic Repair
7. Command Line
I would recommend trying the first option called *Refresh:*
The "Refresh" option is primarily a repair method. It is a great method of returning your PC to a known good state while preserving your files and a great deal of your configuration. With the "Refresh your PC" option, user accounts, data files, and some settings are preserved on your PC without the need to create a backup, or make choices about what to keep or remove

Catalyst install manager has stopped working

Hi,after getting Blue Screen my VGA driver for AMD has deleted by itself.And now i can't install it back because of error that comes out when i try to install it.Doesn't matter which driver,from HP web-page or officiall AMD page.I tried to uninstall the rest of AMD and install it again but it just errors errors and errors.I m including some screenshots that can be useful.The first one is the error,in english it s "Catalyst install manager has stopped working".The second one is Device menager,it says that Intel driver is installed but AMD isnt,and system works with Microsoft standart driver.The third one is the bluescreen detail information.Windows reinstallation didn't help :/ Could it be hardware issue?Thanks in advance.

Hey , Here is a document that shows you how to launch the Recover manager that might help. Turn on the power and press F11 to run recovery without starting Windows. It gives you the option to reinstall software or to recover the Notebook to factory settings. I think it is software related not hardware. Please note remove any and all USB devices. Disconnect all non-essential devices HDMI Cables, as these could cause some issues.Please let me know how this goes. Thanks.

Windows 8.1 doesn't hibernate or sleep after installing amd catalyst driver

hi i am using windows 8.1 64 bit but after installing a amd catalyst center windows behaviour changed it doesn't go for hibernate and sleep and after unstall it windows comes into normal position please refered me proper solution to install amd driver wihout any issue and also suggest me which version will be compatible with my device i have tried amd 14.9 and also 14.11 but issues didn't solve i am curretnly using intel Version10.18.10.3325 windows update show me amd wddi 1.3 driver but it always failed not installing..
Hp pavilion-15 n037tx Notebook
core i5 4200U
4gb ram
This question was solved.
View Solution.

Hi @Ahmed-Aslam
I understand that you are have problems with hibernate and sleep on your notebook.
I would review the attached document. I realize from your post that you have tried some of the things listed, but just check it and see if anything there was missed, perhaps the section on malware issues.
Troubleshooting sleep and hibernate issues in Windows 8
You can also try using system restore to roll back to before the software update to see if that resolves the issue.
Using Microsoft System Restore (Windows 8)
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

ATI Catalyst Install Manager and catalyst Control Center Help

I just run the Windows 7 Upgrade
advisor report and it said that I should uninstall the ATI Catalyst Install Manager and Catalyst Control Center then reinstall after upgrade..
Could someone direct me where I might t find these programs for Windows 7

You must not do this. Just continue upgrade installation.
On my Satellite I got the same message but I have simply continued with upgrade.
At the end everything went fine.

Cannot open Print Wizard using Smilebox

My HP Officejet 6310 All-in-One will not print my Smilebox creations. I am using Windows 7 32-bit. I have used Smilebox for several years and suddenly (in February 2012) I am unable to print. I receive the message that tells me Smilebox is unable to start the Windows Print Wizard. I have contacted Smilebox, but they tell me the problem is not with the program but with the printer. This does not happen with any other program.

Hi - Try installing the printer driver that comes with Win7. Go into Start, Devices and Printers, Add a Printer, scroll to HP and choose the officeJet 6300 series, choose Next and follow the instructions. Once installed, go into Smilebox and try printing with the officeJet 6300 series selected. Hopefully this will provide a good workaround for you.
If that doesn't work, click Start, Devices and Printers, right click on the 6300 and choose Printer Properties. From there, click the Advanced tab and choose "Print directly to the printer". Click Apply and OK. From there try printing again.
Hope that helps.
Say Thanks by clicking the Kudos thumbs up. Please mark the post that solves your problem as an Accepted Solution so other forum users can utilize the solution.
I am an HP employee.

I downloaded the Acrobat 11 trial and I can open the product. During the install it deleted the existing print driver and did not install a new print driver so I CAN Not create and print pdf files.

I downloaded the Acrobat 11 trial and I can open the product. During the install it deleted the existing print driver and did not install a new print driver so I CAN Not create and print pdf files.

What OS? Have you tried a repair and updates from the HELP menu? The updates may be the key.

Have CC programs installed already, but when I open Creative Cloud app Manager it only shows CS6?

Have CC programs installed already, but when I open Creative Cloud app Manager it only shows CS6?

OK thanks - I tried that, would not let me remove the OPM.db file as in solution 2, i uninstalled CS6 versions, i uninstalled Creative Cloud desktop app and then downloaded latest and installed - however, with continual workload, I am not about to remove all Adobe software as suggested in Solution 4! Even in the Creative Cloud app where it shows install new apps, there are only CS6 versions showing?
I have just uninstalled creative cloud app manager again - go to download latest version and the message is - we are currently experiencing problems, please try again later.

[AMD Catalyst] problem with "major" file

Hi, I'm using now the free driver xf86-video-ati for my [Radeon 9200 SE] card, and for several reasons, I want to switch to the proprietary driver, Catalyst.
I followed all the steps of the wiki, but when I "startx", it display:
ukiDynamicMajor = failed to open /proc/ati/major
I would precise that the command "modprobe fglrx" says "fglrx is not a valid expression". I hesitated to use aticonfig, but people say that creating one xorg.cong is bad; thus I have deleted this option.
What I have done:
pacman -S catalyst-hook catalyst-utils catalyst-libgl opencl-catalyst (install succeed)
pacman -R xf86-video-intel xf86-input-evdev (uninstall succeed exept for xf86-input-evdev because of his dependence on xorg-server)
modprobe fglrx (doesn't work)
touch /etc/modules-load.d/catalyst.conf (the file already exist)
less /etc/modules-load.d/catalyst.conf ("fglrx")
touch /etc/X11/xorg-conf.d/20-catalyst.conf
nano /etc/X11/xorg-conf.d/20-catalyst.conf
[quote]
Section "Device"
Identifier "Card0"
Driver "fglrx"
VendorName "ATI Technologies Inc"
BusID "PCI:1:00:1"
EndSection
[/quote]
rnmod radeon (doesn't work => rnmod is not a valid program)
touch /etc/modprobe.d/radeon_blacklist (sucessful)
echo /etc/modprobe.d/radeon_blacklist "blacklist radeon"( sucessful)
Config:
uname -a
Linux archlinux-desktop 3.14.3-1-ARCH #1 SMP PREEMPT Tue May 6 22:45:18 CEST 2014 i686 GNU/Linux
lspci
00:00.0 Host bridge: Silicon Integrated Systems [SiS] 645xx (rev 51)
00:01.0 PCI bridge: Silicon Integrated Systems [SiS] AGP Port (virtual PCI-to-PCI bridge)
00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS963 [MuTIOL Media IO] LPC Controller (rev 14)
00:02.1 SMBus: Silicon Integrated Systems [SiS] SiS961/2/3 SMBus controller
00:02.3 FireWire (IEEE 1394): Silicon Integrated Systems [SiS] FireWire Controller
00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 IDE Controller
00:02.6 Modem: Silicon Integrated Systems [SiS] AC'97 Modem Controller (rev a0)
00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] SiS7012 AC'97 Sound Controller (rev a0)
00:03.0 USB controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f)
00:03.1 USB controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f)
00:03.2 USB controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f)
00:03.3 USB controller: Silicon Integrated Systems [SiS] USB 2.0 Controller
00:0f.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RV280 [Radeon 9200 SE] (rev 01)
01:00.1 Display controller: Advanced Micro Devices, Inc. [AMD/ATI] RV280 [Radeon 9200 SE] (Secondary) (rev 01)
dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.14.3-1-ARCH (nobody@var-lib-archbuild-testing-i686-tobias) (gcc version 4.9.0 (GCC) ) #1 SMP PREEMPT Tue May 6 22:45:18 CEST 2014
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ffeffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000001fff0000-0x000000001fff2fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000001fff3000-0x000000001fffffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[ 0.000000] SMBIOS 2.3 present.
[ 0.000000] DMI: Packard Bell NEC 00000000000000000000000, BIOS F2 10/15/2003
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x1fff0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CAFFF write-protect
[ 0.000000] CB000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FE0000000 write-back
[ 0.000000] 1 base 0D0000000 mask FF8000000 write-combining
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [mem 0x000f5370-0x000f537f] mapped at [c00f5370]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x1f800000-0x1fbfffff]
[ 0.000000] [mem 0x1f800000-0x1fbfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x18000000-0x1f7fffff]
[ 0.000000] [mem 0x18000000-0x1f7fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x17ffffff]
[ 0.000000] [mem 0x00100000-0x003fffff] page 4k
[ 0.000000] [mem 0x00400000-0x17ffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x1fc00000-0x1ffeffff]
[ 0.000000] [mem 0x1fc00000-0x1ffeffff] page 4k
[ 0.000000] BRK [0x01798000, 0x01798fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x1efe2000-0x1f302fff]
[ 0.000000] ACPI: RSDP 000f7520 000014 (v00 GBT )
[ 0.000000] ACPI: RSDT 1fff3000 00002C (v01 GBT AWRDACPI 42302E31 AWRD 01010101)
[ 0.000000] ACPI: FACP 1fff3040 000074 (v01 GBT AWRDACPI 42302E31 AWRD 01010101)
[ 0.000000] ACPI: DSDT 1fff30c0 003104 (v01 GBT AWRDACPI 00001000 MSFT 0100000C)
[ 0.000000] ACPI: FACS 1fff0000 000040
[ 0.000000] ACPI: APIC 1fff6200 000068 (v01 GBT AWRDACPI 42302E31 AWRD 01010101)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 511MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 1fff0000
[ 0.000000] low ram: 0 - 1fff0000
[ 0.000000] BRK [0x01799000, 0x01799fff] PGTABLE
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] Normal [mem 0x01000000-0x1ffeffff]
[ 0.000000] HighMem empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x1ffeffff]
[ 0.000000] On node 0 totalpages: 130958
[ 0.000000] free_area_init_node: node 0, pgdat c15fc600, node_mem_map dfbf0020
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] Normal zone: 992 pages used for memmap
[ 0.000000] Normal zone: 126960 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 20, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] smpboot: Allowing 2 CPUs, 1 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] e820: [mem 0x20000000-0xfebfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @dfbd0000 s33792 r0 d23552 u57344
[ 0.000000] pcpu-alloc: s33792 r0 d23552 u57344 alloc=14*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129934
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=14bd8feb-04a9-4b92-b3cb-798729208c52 rw quiet
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 1048440 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 507120K/523832K available (4446K kernel code, 470K rwdata, 1280K rodata, 568K init, 956K bss, 16712K reserved, 0K highmem)
[ 0.000000] virtual kernel memory layout:
fixmap : 0xfff15000 - 0xfffff000 ( 936 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xe07f0000 - 0xff7fe000 ( 496 MB)
lowmem : 0xc0000000 - 0xdfff0000 ( 511 MB)
.init : 0xc160f000 - 0xc169d000 ( 568 kB)
.data : 0xc1457c92 - 0xc160eb40 (1755 kB)
.text : 0xc1000000 - 0xc1457c92 (4447 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:2304 nr_irqs:512 16
[ 0.000000] CPU 0 irqstacks, hard=df408000 soft=df40a000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2625.859 MHz processor
[ 0.003353] Calibrating delay loop (skipped), value calculated using timer frequency.. 5253.53 BogoMIPS (lpj=8752863)
[ 0.003360] pid_max: default: 32768 minimum: 301
[ 0.003378] ACPI: Core revision 20131218
[ 0.008679] ACPI: All ACPI Tables successfully acquired
[ 0.010020] Security Framework initialized
[ 0.010032] Yama: becoming mindful.
[ 0.010064] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.010069] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.010456] Initializing cgroup subsys memory
[ 0.010473] Initializing cgroup subsys devices
[ 0.010478] Initializing cgroup subsys freezer
[ 0.010482] Initializing cgroup subsys net_cls
[ 0.010485] Initializing cgroup subsys blkio
[ 0.010546] CPU0: Hyper-Threading is disabled
[ 0.010555] mce: CPU supports 4 MCE banks
[ 0.010568] CPU0: Thermal monitoring enabled (TM1)
[ 0.010592] Last level iTLB entries: 4KB 128, 2MB 128, 4MB 128
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 64, 1GB 0
tlb_flushall_shift: 6
[ 0.018898] ftrace: allocating 18912 entries in 37 pages
[ 0.026857] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.027167] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.062643] smpboot: CPU0: Intel(R) Celeron(R) CPU 2.60GHz (fam: 0f, model: 02, stepping: 09)
[ 0.063333] Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
[ 0.063333] ... version: 0
[ 0.063333] ... bit width: 40
[ 0.063333] ... generic registers: 18
[ 0.063333] ... value mask: 000000ffffffffff
[ 0.063333] ... max period: 0000007fffffffff
[ 0.063333] ... fixed-purpose events: 0
[ 0.063333] ... event mask: 000000000003ffff
[ 0.076710] x86: Booted up 1 node, 1 CPUs
[ 0.076719] smpboot: Total of 1 processors activated (5253.53 BogoMIPS)
[ 0.077148] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.077427] devtmpfs: initialized
[ 0.077889] PM: Registering ACPI NVS region [mem 0x1fff0000-0x1fff2fff] (12288 bytes)
[ 0.079963] pinctrl core: initialized pinctrl subsystem
[ 0.080103] RTC time: 16:19:41, date: 05/12/14
[ 0.080222] NET: Registered protocol family 16
[ 0.080459] cpuidle: using governor ladder
[ 0.080464] cpuidle: using governor menu
[ 0.080574] ACPI: bus type PCI registered
[ 0.080581] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.092329] PCI: PCI BIOS revision 2.10 entry at 0xfb1c0, last bus=1
[ 0.092335] PCI: Using configuration type 1 for base access
[ 0.093965] bio: create slab <bio-0> at 0
[ 0.094273] ACPI: Added _OSI(Module Device)
[ 0.094279] ACPI: Added _OSI(Processor Device)
[ 0.094282] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.094286] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.098161] ACPI: Interpreter enabled
[ 0.098184] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131218/hwxface-580)
[ 0.098193] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-580)
[ 0.098216] ACPI: (supports S0 S3 S4 S5)
[ 0.098220] ACPI: Using IOAPIC for interrupt routing
[ 0.098299] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.098438] ACPI: No dock devices found.
[ 0.108047] ACPI: \_PR_.CPU1: failed to get CPU APIC ID.
[ 0.108184] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.108198] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
[ 0.108210] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.108371] acpi PNP0A03:00: host bridge window [io 0x0000-0x047f] (ignored)
[ 0.108378] acpi PNP0A03:00: host bridge window [io 0x0490-0x0cf7] (ignored)
[ 0.108381] acpi PNP0A03:00: host bridge window [io 0x0d00-0x0fff] (ignored)
[ 0.108385] acpi PNP0A03:00: host bridge window [io 0x1100-0xffff] (ignored)
[ 0.108389] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.108393] acpi PNP0A03:00: host bridge window [mem 0x20000000-0xfebfffff] (ignored)
[ 0.108397] PCI: root bus 00: using default resources
[ 0.108402] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[ 0.108726] PCI host bridge to bus 0000:00
[ 0.108736] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.108741] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.108746] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
[ 0.108768] pci 0000:00:00.0: [1039:0648] type 00 class 0x060000
[ 0.108783] pci 0000:00:00.0: reg 0x10: [mem 0xd0000000-0xd7ffffff]
[ 0.109012] pci 0000:00:01.0: [1039:0003] type 01 class 0x060400
[ 0.109196] pci 0000:00:02.0: [1039:0008] type 00 class 0x060100
[ 0.109281] pci 0000:00:02.0: Enabling SiS 96x SMBus
[ 0.109447] pci 0000:00:02.1: [1039:0016] type 00 class 0x0c0500
[ 0.109507] pci 0000:00:02.1: reg 0x20: [io 0x1400-0x141f]
[ 0.109684] pci 0000:00:02.3: [1039:7007] type 00 class 0x0c0010
[ 0.109711] pci 0000:00:02.3: reg 0x10: [mem 0xeb000000-0xeb000fff]
[ 0.109771] pci 0000:00:02.3: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[ 0.109811] pci 0000:00:02.3: supports D1 D2
[ 0.109815] pci 0000:00:02.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.110016] pci 0000:00:02.5: [1039:5513] type 00 class 0x010180
[ 0.110085] pci 0000:00:02.5: reg 0x20: [io 0xf000-0xf00f]
[ 0.110284] pci 0000:00:02.6: [1039:7013] type 00 class 0x070300
[ 0.110311] pci 0000:00:02.6: reg 0x10: [io 0xd000-0xd0ff]
[ 0.110325] pci 0000:00:02.6: reg 0x14: [io 0xd400-0xd47f]
[ 0.110410] pci 0000:00:02.6: supports D1 D2
[ 0.110414] pci 0000:00:02.6: PME# supported from D3hot D3cold
[ 0.110506] pci 0000:00:02.6: System wakeup disabled by ACPI
[ 0.110605] pci 0000:00:02.7: [1039:7012] type 00 class 0x040100
[ 0.110631] pci 0000:00:02.7: reg 0x10: [io 0xd800-0xd8ff]
[ 0.110645] pci 0000:00:02.7: reg 0x14: [io 0xdc00-0xdc7f]
[ 0.110730] pci 0000:00:02.7: supports D1 D2
[ 0.110734] pci 0000:00:02.7: PME# supported from D3hot D3cold
[ 0.110907] pci 0000:00:03.0: [1039:7001] type 00 class 0x0c0310
[ 0.110929] pci 0000:00:03.0: reg 0x10: [mem 0xeb001000-0xeb001fff]
[ 0.111078] pci 0000:00:03.0: System wakeup disabled by ACPI
[ 0.111177] pci 0000:00:03.1: [1039:7001] type 00 class 0x0c0310
[ 0.111199] pci 0000:00:03.1: reg 0x10: [mem 0xeb002000-0xeb002fff]
[ 0.111356] pci 0000:00:03.1: System wakeup disabled by ACPI
[ 0.111454] pci 0000:00:03.2: [1039:7001] type 00 class 0x0c0310
[ 0.111475] pci 0000:00:03.2: reg 0x10: [mem 0xeb003000-0xeb003fff]
[ 0.111623] pci 0000:00:03.2: System wakeup disabled by ACPI
[ 0.111734] pci 0000:00:03.3: [1039:7002] type 00 class 0x0c0320
[ 0.111760] pci 0000:00:03.3: reg 0x10: [mem 0xeb004000-0xeb004fff]
[ 0.111850] pci 0000:00:03.3: PME# supported from D0 D3hot D3cold
[ 0.112045] pci 0000:00:0f.0: [10ec:8139] type 00 class 0x020000
[ 0.112070] pci 0000:00:0f.0: reg 0x10: [io 0xe000-0xe0ff]
[ 0.112083] pci 0000:00:0f.0: reg 0x14: [mem 0xeb005000-0xeb0050ff]
[ 0.112169] pci 0000:00:0f.0: supports D1 D2
[ 0.112173] pci 0000:00:0f.0: PME# supported from D1 D2 D3hot D3cold
[ 0.112437] pci 0000:01:00.0: [1002:5964] type 00 class 0x030000
[ 0.112464] pci 0000:01:00.0: reg 0x10: [mem 0xd8000000-0xdfffffff pref]
[ 0.112476] pci 0000:01:00.0: reg 0x14: [io 0xc000-0xc0ff]
[ 0.112488] pci 0000:01:00.0: reg 0x18: [mem 0xe9000000-0xe900ffff]
[ 0.112521] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[ 0.112565] pci 0000:01:00.0: supports D1 D2
[ 0.112661] pci 0000:01:00.1: [1002:5d44] type 00 class 0x038000
[ 0.112682] pci 0000:01:00.1: reg 0x10: [mem 0xe0000000-0xe7ffffff pref]
[ 0.112695] pci 0000:01:00.1: reg 0x14: [mem 0xe9010000-0xe901ffff]
[ 0.112764] pci 0000:01:00.1: supports D1 D2
[ 0.112888] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.112896] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
[ 0.112904] pci 0000:00:01.0: bridge window [mem 0xe8000000-0xe9ffffff]
[ 0.112910] pci 0000:00:01.0: bridge window [mem 0xd8000000-0xe7ffffff pref]
[ 0.112924] pci_bus 0000:00: on NUMA node 0
[ 0.113106] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.113252] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 0.113436] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 0.113579] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.113723] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 0.113876] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 0.114026] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.114178] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 0.114969] ACPI: Enabled 2 GPEs in block 00 to 0F
[ 0.115202] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.115209] vgaarb: loaded
[ 0.115211] vgaarb: bridge control possible 0000:01:00.0
[ 0.115301] PCI: Using ACPI for IRQ routing
[ 0.115309] PCI: pci_cache_line_size set to 64 bytes
[ 0.115368] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.115373] e820: reserve RAM buffer [mem 0x1fff0000-0x1fffffff]
[ 0.115616] NetLabel: Initializing
[ 0.115622] NetLabel: domain hash size = 128
[ 0.115624] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.115655] NetLabel: unlabeled traffic allowed by default
[ 0.115740] Switched to clocksource refined-jiffies
[ 0.129136] pnp: PnP ACPI init
[ 0.129177] ACPI: bus type PNP registered
[ 0.129597] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.130147] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 0.130157] system 00:01: [io 0x0290-0x029f] has been reserved
[ 0.130162] system 00:01: [io 0x0800-0x0805] has been reserved
[ 0.130170] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.130207] pnp 00:02: [dma 4]
[ 0.130277] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.130404] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.130503] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.130621] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.130910] pnp 00:06: [dma 2]
[ 0.131028] pnp 00:06: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.131556] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.132089] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.132675] pnp 00:09: [dma 3]
[ 0.132810] pnp 00:09: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.133009] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.133074] pnp: PnP ACPI: found 11 devices
[ 0.133080] ACPI: bus type PNP unregistered
[ 0.174911] Switched to clocksource acpi_pm
[ 0.174951] pci 0000:00:02.3: BAR 6: assigned [mem 0x20000000-0x2001ffff pref]
[ 0.174962] pci 0000:01:00.0: BAR 6: assigned [mem 0xe8000000-0xe801ffff pref]
[ 0.174969] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.174975] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
[ 0.174983] pci 0000:00:01.0: bridge window [mem 0xe8000000-0xe9ffffff]
[ 0.174989] pci 0000:00:01.0: bridge window [mem 0xd8000000-0xe7ffffff pref]
[ 0.174999] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.175003] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
[ 0.175007] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
[ 0.175010] pci_bus 0000:01: resource 1 [mem 0xe8000000-0xe9ffffff]
[ 0.175013] pci_bus 0000:01: resource 2 [mem 0xd8000000-0xe7ffffff pref]
[ 0.175076] NET: Registered protocol family 2
[ 0.175437] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.175457] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.175477] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.175521] TCP: reno registered
[ 0.175531] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.175541] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.175688] NET: Registered protocol family 1
[ 0.397112] pci 0000:01:00.0: Boot video device
[ 0.397124] PCI: CLS 32 bytes, default 64
[ 0.397238] Unpacking initramfs...
[ 0.517648] Freeing initrd memory: 3204K (defe2000 - df303000)
[ 0.517809] apm: BIOS not found.
[ 0.517886] Scanning for low memory corruption every 60 seconds
[ 0.518572] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.533762] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.536896] zbud: loaded
[ 0.537090] VFS: Disk quotas dquot_6.5.2
[ 0.537200] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.537623] msgmni has been set to 996
[ 0.537789] Key type big_key registered
[ 0.538268] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.538390] io scheduler noop registered
[ 0.538397] io scheduler deadline registered
[ 0.538493] io scheduler cfq registered (default)
[ 0.538712] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.538757] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.538862] vesafb: mode is 1280x1024x32, linelength=5120, pages=0
[ 0.538866] vesafb: scrolling: redraw
[ 0.538870] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[ 0.539366] vesafb: framebuffer at 0xd8000000, mapped to 0xe0800000, using 5120k, total 5120k
[ 0.646493] Console: switching to colour frame buffer device 160x64
[ 0.753177] fb0: VESA VGA frame buffer device
[ 0.753268] GHES: HEST is not enabled!
[ 0.753308] isapnp: Scanning for PnP cards...
[ 1.066034] isapnp: No Plug & Play device found
[ 1.066191] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.086839] 00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 1.107535] 00:08: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[ 1.108786] rtc_cmos 00:03: RTC can wake from S4
[ 1.109049] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.109090] rtc_cmos 00:03: alarms up to one year, 242 bytes nvram
[ 1.109177] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.109384] TCP: cubic registered
[ 1.109696] NET: Registered protocol family 10
[ 1.110235] NET: Registered protocol family 17
[ 1.110539] Using IPI No-Shortcut mode
[ 1.110887] registered taskstats version 1
[ 1.111374] Magic number: 14:861:337
[ 1.111396] tty tty58: hash matches
[ 1.111477] rtc_cmos 00:03: setting system clock to 2014-05-12 16:19:42 UTC (1399911582)
[ 1.111561] PM: Hibernation image not present or could not be loaded.
[ 1.112337] Freeing unused kernel memory: 568K (c160f000 - c169d000)
[ 1.112374] Write protecting the kernel text: 4448k
[ 1.112407] Write protecting the kernel read-only data: 1284k
[ 1.132515] random: systemd-tmpfile urandom read with 0 bits of entropy available
[ 1.140455] systemd-udevd[40]: starting version 212
[ 1.240350] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 1.240356] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 1.240605] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.249861] Floppy drive(s): fd0 is 1.44M
[ 1.263944] FDC 0 is a post-1991 82077
[ 1.295454] SCSI subsystem initialized
[ 1.312358] ACPI: bus type USB registered
[ 1.312456] usbcore: registered new interface driver usbfs
[ 1.312497] usbcore: registered new interface driver hub
[ 1.316781] usbcore: registered new device driver usb
[ 1.317900] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.318313] ehci-pci: EHCI PCI platform driver
[ 1.319280] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.319680] ohci-pci: OHCI PCI platform driver
[ 1.327015] libata version 3.00 loaded.
[ 1.363547] firewire_ohci 0000:00:02.3: added OHCI v1.0 device as card 0, 4 IR + 6 IT contexts, quirks 0x0
[ 1.364218] ehci-pci 0000:00:03.3: EHCI Host Controller
[ 1.364240] ehci-pci 0000:00:03.3: new USB bus registered, assigned bus number 1
[ 1.364332] ehci-pci 0000:00:03.3: irq 23, io mem 0xeb004000
[ 1.373423] ehci-pci 0000:00:03.3: USB 2.0 started, EHCI 1.00
[ 1.373943] hub 1-0:1.0: USB hub found
[ 1.373981] hub 1-0:1.0: 6 ports detected
[ 1.375001] ohci-pci 0000:00:03.0: OHCI PCI host controller
[ 1.375023] ohci-pci 0000:00:03.0: new USB bus registered, assigned bus number 2
[ 1.375100] ohci-pci 0000:00:03.0: irq 20, io mem 0xeb001000
[ 1.429251] hub 2-0:1.0: USB hub found
[ 1.429296] hub 2-0:1.0: 2 ports detected
[ 1.429636] pata_sis 0000:00:02.5: version 0.5.2
[ 1.429683] pata_sis 0000:00:02.5: SiS 962/963 MuTIOL IDE UDMA133 controller
[ 1.437030] scsi0 : pata_sis
[ 1.443413] scsi1 : pata_sis
[ 1.443626] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[ 1.443633] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[ 1.444146] ohci-pci 0000:00:03.1: OHCI PCI host controller
[ 1.444168] ohci-pci 0000:00:03.1: new USB bus registered, assigned bus number 3
[ 1.444242] ohci-pci 0000:00:03.1: irq 21, io mem 0xeb002000
[ 1.453047] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.499191] hub 3-0:1.0: USB hub found
[ 1.499232] hub 3-0:1.0: 2 ports detected
[ 1.499756] ohci-pci 0000:00:03.2: OHCI PCI host controller
[ 1.499778] ohci-pci 0000:00:03.2: new USB bus registered, assigned bus number 4
[ 1.499856] ohci-pci 0000:00:03.2: irq 22, io mem 0xeb003000
[ 1.520042] tsc: Refined TSC clocksource calibration: 2625.851 MHz
[ 1.552850] hub 4-0:1.0: USB hub found
[ 1.552893] hub 4-0:1.0: 2 ports detected
[ 1.603787] ata1.00: ATA-7: Maxtor 6Y080L0, YAR41BW0, max UDMA/133
[ 1.603796] ata1.00: 160086528 sectors, multi 16: LBA
[ 1.617092] ata1.00: configured for UDMA/133
[ 1.617362] scsi 0:0:0:0: Direct-Access ATA Maxtor 6Y080L0 YAR4 PQ: 0 ANSI: 5
[ 1.733392] usb 1-4: new high-speed USB device number 3 using ehci-pci
[ 1.861345] hub 1-4:1.0: USB hub found
[ 1.861759] hub 1-4:1.0: 4 ports detected
[ 1.863604] firewire_core 0000:00:02.3: created device fw0: GUID 00000d610024cc70, S400
[ 1.906938] ata2.00: ATAPI: HL-DT-STDVD-ROM GDR8162B, 0017, max UDMA/66
[ 1.906951] ata2.01: ATAPI: LITE-ON DVD+RW LDW-401S, E9S3, max UDMA/33
[ 1.920261] ata2.00: configured for UDMA/66
[ 1.933596] ata2.01: configured for UDMA/33
[ 1.942307] scsi 1:0:0:0: CD-ROM HL-DT-ST DVD-ROM GDR8162B 0017 PQ: 0 ANSI: 5
[ 1.943253] scsi 1:0:1:0: CD-ROM LITE-ON DVD+RW LDW-401S E9S3 PQ: 0 ANSI: 5
[ 1.968652] sd 0:0:0:0: [sda] 160086528 512-byte logical blocks: (81.9 GB/76.3 GiB)
[ 1.968905] sd 0:0:0:0: [sda] Write Protect is off
[ 1.968913] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.969022] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.979035] sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
[ 1.979044] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.979566] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.991510] sr1: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[ 1.991993] sr 1:0:1:0: Attached scsi CD-ROM sr1
[ 2.009048] sda: sda1 sda2 sda3 < sda5 sda6 >
[ 2.010569] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.143550] usb 2-1: new low-speed USB device number 2 using ohci-pci
[ 2.345412] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.358710] usbcore: registered new interface driver usbhid
[ 2.358717] usbhid: USB HID core driver
[ 2.361517] input: HID 04d9:048e as /devices/pci0000:00/0000:00:03.0/usb2/2-1/2-1:1.0/0003:04D9:048E.0001/input/input1
[ 2.361837] hid-generic 0003:04D9:048E.0001: input,hidraw0: USB HID v1.10 Mouse [HID 04d9:048e] on usb-0000:00:03.0-1/input0
[ 2.407135] usb 1-4.4: new high-speed USB device number 4 using ehci-pci
[ 2.500521] usb-storage 1-4.4:1.0: USB Mass Storage device detected
[ 2.500774] scsi2 : usb-storage 1-4.4:1.0
[ 2.502128] usbcore: registered new interface driver usb-storage
[ 2.520155] Switched to clocksource tsc
[ 3.175339] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 3.505428] scsi 2:0:0:0: Direct-Access USB DISK 2.0 PMAP PQ: 0 ANSI: 4
[ 3.507279] sd 2:0:0:0: [sdb] 15273600 512-byte logical blocks: (7.82 GB/7.28 GiB)
[ 3.508020] sd 2:0:0:0: [sdb] Write Protect is off
[ 3.508029] sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 3.508769] sd 2:0:0:0: [sdb] No Caching mode page found
[ 3.509434] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 3.513361] random: nonblocking pool is initialized
[ 3.514387] sd 2:0:0:0: [sdb] No Caching mode page found
[ 3.515049] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 3.517301] sdb: sdb1 sdb2
[ 3.520401] sd 2:0:0:0: [sdb] No Caching mode page found
[ 3.521391] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 3.522153] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 3.928631] systemd[1]: systemd 212 running in system mode. (+PAM -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ +SECCOMP -APPARMOR)
[ 3.929099] systemd[1]: Detected architecture 'x86'.
[ 3.937340] systemd[1]: Set hostname to <archlinux-desktop>.
[ 5.174046] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[ 5.175398] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 5.175650] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 5.175707] systemd[1]: Starting Remote File Systems.
[ 5.175758] systemd[1]: Reached target Remote File Systems.
[ 5.175820] systemd[1]: Starting Encrypted Volumes.
[ 5.175867] systemd[1]: Reached target Encrypted Volumes.
[ 5.175954] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 5.176267] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 5.176359] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 5.176504] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 5.176555] systemd[1]: Starting Swap.
[ 5.176602] systemd[1]: Reached target Swap.
[ 5.176652] systemd[1]: Expecting device dev-disk-by\x2duuid-4e223aa4\x2d3894\x2d41bc\x2db82c\x2d955ae89b3eb2.device...
[ 5.176796] systemd[1]: Expecting device dev-disk-by\x2duuid-b7ca07ac\x2d5ceb\x2d40d6\x2db55c\x2ded651e31f452.device...
[ 5.176850] systemd[1]: Starting Root Slice.
[ 5.208364] systemd[1]: Created slice Root Slice.
[ 5.208422] systemd[1]: Starting User and Session Slice.
[ 5.209187] systemd[1]: Created slice User and Session Slice.
[ 5.209244] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 5.209403] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 5.209451] systemd[1]: Starting Delayed Shutdown Socket.
[ 5.209585] systemd[1]: Listening on Delayed Shutdown Socket.
[ 5.209635] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 5.209740] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 5.209789] systemd[1]: Starting LVM2 metadata daemon socket.
[ 5.209917] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 5.209982] systemd[1]: Starting udev Kernel Socket.
[ 5.210180] systemd[1]: Listening on udev Kernel Socket.
[ 5.210249] systemd[1]: Starting udev Control Socket.
[ 5.210366] systemd[1]: Listening on udev Control Socket.
[ 5.210428] systemd[1]: Starting Journal Socket.
[ 5.210621] systemd[1]: Listening on Journal Socket.
[ 5.210717] systemd[1]: Starting System Slice.
[ 5.211489] systemd[1]: Created slice System Slice.
[ 5.211583] systemd[1]: Started File System Check on Root Device.
[ 5.211623] systemd[1]: Starting system-systemd\x2dfsck.slice.
[ 5.212405] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 5.212459] systemd[1]: Mounting Temporary Directory...
[ 5.239615] systemd[1]: Starting system-getty.slice.
[ 5.240697] systemd[1]: Created slice system-getty.slice.
[ 5.240838] systemd[1]: Mounting Debug File System...
[ 5.279740] systemd[1]: Started Load Kernel Modules.
[ 5.296122] systemd[1]: Starting Apply Kernel Variables...
[ 5.297870] systemd[1]: Starting Setup Virtual Console...
[ 5.299634] systemd[1]: Mounting POSIX Message Queue File System...
[ 5.301446] systemd[1]: Mounting Configuration File System...
[ 5.344473] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 5.346155] systemd[1]: Mounted FUSE Control File System.
[ 5.346271] systemd[1]: Mounting Huge Pages File System...
[ 5.370976] systemd[1]: Starting Set Up Additional Binary Formats...
[ 5.372655] systemd[1]: Starting udev Coldplug all Devices...
[ 5.374485] systemd[1]: Starting Journal Service...
[ 5.376393] systemd[1]: Started Journal Service.
[ 5.926924] systemd-udevd[120]: starting version 212
[ 6.249395] EXT4-fs (sda5): re-mounted. Opts: data=ordered
[ 7.438155] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 7.438167] ACPI: Power Button [PWRB]
[ 7.438350] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 7.438360] ACPI: Power Button [PWRF]
[ 7.585684] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 7.625549] parport_pc 00:09: reported by Plug and Play ACPI
[ 7.625639] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[ 7.658989] Linux agpgart interface v0.103
[ 7.722256] sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x1400
[ 7.809304] [drm] Initialized drm 1.1.0 20060810
[ 7.958917] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 7.958969] 8139cp 0000:00:0f.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[ 7.980566] mousedev: PS/2 mouse device common for all mice
[ 7.980931] 8139too: 8139too Fast Ethernet driver 0.9.28
[ 7.984132] 8139too 0000:00:0f.0 eth0: RealTek RTL8139 at 0xe1724000, 00:0d:61:22:1d:3c, IRQ 16
[ 7.985877] agpgart-sis 0000:00:00.0: SiS chipset [1039/0648]
[ 8.016252] agpgart-sis 0000:00:00.0: AGP aperture is 128M @ 0xd0000000
[ 8.116064] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 8.251837] microcode: CPU0 sig=0xf29, pf=0x4, revision=0x11
[ 8.261786] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 8.279526] [drm] radeon kernel modesetting enabled.
[ 8.279631] checking generic (d8000000 500000) vs hw (d8000000 8000000)
[ 8.279639] fb: conflicting fb hw usage radeondrmfb vs VESA VGA - removing generic driver
[ 8.279680] Console: switching to colour dummy device 80x25
[ 8.301981] [drm] initializing kernel modesetting (RV280 0x1002:0x5964 0x1458:0x4032).
[ 8.302015] [drm] register mmio base: 0xE9000000
[ 8.302018] [drm] register mmio size: 65536
[ 8.302188] agpgart-sis 0000:00:00.0: AGP 3.5 bridge
[ 8.302214] agpgart-sis 0000:00:00.0: putting AGP V3 device at 0000:00:00.0 into 8x mode
[ 8.302220] agpgart-sis 0000:00:00.0: SiS delay workaround: giving bridge time to recover
[ 8.313685] agpgart-sis 0000:00:00.0: putting AGP V3 device at 0000:01:00.0 into 8x mode
[ 8.313704] radeon 0000:01:00.0: GTT: 128M 0xD0000000 - 0xD7FFFFFF
[ 8.313711] [drm] Generation 2 PCI interface, using max accessible memory
[ 8.313718] radeon 0000:01:00.0: VRAM: 128M 0x00000000D8000000 - 0x00000000DFFFFFFF (128M used)
[ 8.313742] [drm] Detected VRAM RAM=128M, BAR=128M
[ 8.313746] [drm] RAM width 64bits DDR
[ 8.318743] [TTM] Zone kernel: Available graphics memory: 255446 kiB
[ 8.318750] [TTM] Initializing pool allocator
[ 8.318762] [TTM] Initializing DMA pool allocator
[ 8.318815] [drm] radeon: 128M of VRAM memory ready
[ 8.318821] [drm] radeon: 128M of GTT memory ready.
[ 8.321257] radeon 0000:01:00.0: WB disabled
[ 8.321270] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x00000000d0000000 and cpu addr 0xe07fe000
[ 8.321276] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 8.321278] [drm] Driver supports precise vblank timestamp query.
[ 8.321311] [drm] radeon: irq initialized.
[ 8.321340] [drm] Loading R200 Microcode
[ 8.337126] ppdev: user-space parallel port driver
[ 8.350382] [drm] radeon: ring at 0x00000000D0001000
[ 8.350414] [drm] ring test succeeded in 1 usecs
[ 8.350728] [drm] ib test succeeded in 0 usecs
[ 8.351298] [drm] Radeon Display Connectors
[ 8.351305] [drm] Connector 0:
[ 8.351307] [drm] VGA-1
[ 8.351311] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[ 8.351313] [drm] Encoders:
[ 8.351315] [drm] CRT1: INTERNAL_DAC1
[ 8.351317] [drm] Connector 1:
[ 8.351319] [drm] SVIDEO-1
[ 8.351321] [drm] Encoders:
[ 8.351322] [drm] TV1: INTERNAL_DAC2
[ 8.481905] [drm] fb mappable at 0xD8040000
[ 8.481912] [drm] vram apper at 0xD8000000
[ 8.481914] [drm] size 8294400
[ 8.481916] [drm] fb depth is 24
[ 8.481918] [drm] pitch is 7680
[ 8.482299] fbcon: radeondrmfb (fb0) is primary device
[ 8.535240] Console: switching to colour frame buffer device 240x67
[ 8.614028] systemd-udevd[135]: renamed network interface eth0 to enp0s15
[ 8.614028] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[ 8.614034] radeon 0000:01:00.0: registered panic notifier
[ 8.614052] [drm] Initialized radeon 2.37.0 20080528 for 0000:01:00.0 on minor 0
[ 9.523376] intel8x0_measure_ac97_clock: measured 52701 usecs (2535 samples)
[ 9.523383] intel8x0: clocking to 48000
[ 10.264223] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: data=ordered
[ 10.529887] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: data=ordered
[ 10.688972] systemd-journald[112]: Received request to flush runtime journal from PID 1
[ 11.588053] 8139too 0000:00:0f.0 enp0s15: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 130.919975] ISO 9660 Extensions: RRIP_1991A
[ 1052.318149] perf samples too long (2508 > 2500), lowering kernel.perf_event_max_sample_rate to 50100
[ 2771.015182] systemd[1]: Starting Journal Service...
[ 2773.625872] systemd-journald[112]: Received SIGTERM from PID 1 (systemd).
[ 2773.907874] systemd[1]: Unit systemd-journald.service entered failed state.
[ 2773.921616] systemd[1]: systemd-journald.service has no holdoff time, scheduling restart.
[ 2773.922423] systemd[1]: Stopping Journal Service...
[ 2773.922521] systemd[1]: Starting Journal Service...
[ 2773.924633] systemd[1]: Started Journal Service.
[ 2774.243766] systemd-journald[860]: Received request to flush runtime journal from PID 1
[ 2848.068160] perf samples too long (5003 > 4990), lowering kernel.perf_event_max_sample_rate to 25200
[ 2932.591054] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 2932.591064] Disabling lock debugging due to kernel taint
[ 2932.632805] <6>[fglrx] Maximum main memory to use for locked dma buffers: 427 MBytes.
[ 2932.633428] <3>[fglrx:firegl_init_device_list] *ERROR* No supported display adapters were found
[ 2932.633438] <3>[fglrx:firegl_init_module] *ERROR* firegl_init_devices failed
[ 3146.754229] <6>[fglrx] Maximum main memory to use for locked dma buffers: 427 MBytes.
[ 3146.754491] <3>[fglrx:firegl_init_device_list] *ERROR* No supported display adapters were found
[ 3146.754495] <3>[fglrx:firegl_init_module] *ERROR* firegl_init_devices failed
[ 3387.964180] <6>[fglrx] Maximum main memory to use for locked dma buffers: 427 MBytes.
[ 3387.964434] <3>[fglrx:firegl_init_device_list] *ERROR* No supported display adapters were found
[ 3387.964440] <3>[fglrx:firegl_init_module] *ERROR* firegl_init_devices failed
I have already seen this link and he explain that installing from AUR has resolved his problem, but the wiki says:
The second method you can use is the AUR; PKGBUILDs offered here are also made by Vi0L0 and are the same he uses to built packages for his repository. Lastly, you can install the driver directly from AMD.
My aim is to install Catalyst
Thank you for your help

I don't think that card is supported by AMD Catalyst anymore, even by the legacy branch...

AMD Catalyst 7.7

AMD Releases Catalyst 7.7
http://ati.amd.com/support/driver.html
New Features:
New Catalyst™ Control Center Avivo features
12X and 24X Anti-Aliasing support for the ATI Radeon™ HD 2900 XT and ATI Radeon™ HD 2600 Series
kind regards

Resolved issues for Vista:
Quote
# Call of Juarez: Enabling AA no longer result in occasional corruption being noticed. Further details can be found in topic number 737-28455
# Doom3: Flashing is no longer observed when loading the game, or during some of the cinematic, or during game play when Catalyst™ AI is disabled, AA is set to 8x, and CrossFire™ is enabled. Further details can be found in topic number 737-28460
# Lost Planet: Corruption is no longer noticed after a short time period of game play. Further details can be found in topic number 737-28456
# Monsters.Inc: Enabling DXVA no longer results in certain scenes being choppy. Further details can be found in topic number 737-28465
# Pacific Fighters: Corruption is no longer noticed when enabling superAA. Further details can be found in topic number 737-28448
# Prey: A blank screen is no longer displayed when trying to load game if AA is set to either 4x or 8x and filter wide tent is used. Further details can be found in topic number 737-28461
# Quake 3 and 4: Resuming from a standby state no longer results in the display image appearing too bright. Further details can be found in topic number 737-28437
# Quake 4: Playing the game with CrossFire™ enabled no longer results in corruption being noticed after a short time of game play. Further details can be found in topic number 737-28459
# Playing a DVD under the Windows Vista operating system using the Windows Media Player no longer results in the DVD failing to play when switching between display devices using the hot-key function. Further details can be found in topic number 737-24472
# The desktop shortcut to the Catalyst™ Control Center no longer disappears after performing a Windows Anytime Upgrade on some hardware configurations running Vista. Further details can be found in topic number 737-27078
# Playing a DVD using the Windows Media Player and enabling subtitles no longer results in the playback of the DVD flashing. Further details can be found in topic number 737-28417
# The button sizes found in the Catalyst™ Control Center (Japanese version) are no longer displayed as different sizes than the previous versions of the Catalyst™ Control Center. Further details can be found in topic number 737-28432
# The Avivo preview video no longer appears blank when changing from extended desktop mode to single desktop mode. Further details can be found in topic number 737-28433
# The SuperAA values found in the Catalyst™ Control Center->All Setting->3D aspect page are no longer reset to zero when rebooting the system. Further details can be found in topic number 737-28434
# Catalyst™ Control Center: Connecting a secondary display device no longer results in the display device failing to be selected in all of the aspect pages of the Catalyst™ Control Center where the Graphics Adapter drop down menu exists. Further details can be found in topic number 737-28435
# The select a skin aspect page found in the Catalyst™ Control Center is now localized for all supported languages. Further details can be found in topic number 737-28438
# Making changes to the Avivo aspect, but not applying the changes no longer results in OverDrive™ becoming unlocked. Further details can be found in topic number 737-28439
# Capturing video to AVI format no longer results in the recording function failing to work. Further details can be found in topic number 737-28440
# HDMI audio stutter is no longer heard when playing MPEG clip at certain resolutions on specific HDMI device. Further details can be found in topic number 737-28444
# The display resolution of 2048x1536 60Hz. is now available within the Catalyst™ Control Center. Further details can be found in topic number 737-28449
# The edges of the subtitles no longer appear transparent when playing a DVD using DVD 8.0 or Windows Media Player 11. Further details can be found in topic number 737-28450
# Playing HD DVD content followed by attempting to hot unplug a display device and then hot-plugging the same display device to a different port no longer results in the HD DVD playback failing to resume. Further details can be found in topic number 737-28451
# Catalyst™ Control Center: Attempting to change the Core clock settings within the OverDrive™ aspect no longer results in the new setting failing to be applied. Further details can be found in topic number 737-28452
# Connecting two display devices and performing a mode change no longer results in the change taking an extraordinary long time to complete. Further details can be found in topic number 737-28453
# Connecting a Lenovo 19" Wide Slim LCD display device to either an ATI Radeon™ HD 2600 or 2400 and setting the display resolution to 1440x900 60Hz. no longer results in an image failing to be displayed. Further details can be found in topic number 737-28454
# The cancel button is now translated to Chinese-Traditional within the ATI Catalyst™ Install Manager. Further details can be found in topic number 737-28457
# Connecting a secondary display device and enabling extended desktop mode no longer results in the Catalyst™ Control Center->Avivio Basic aspect options failing to be applied when watching a DVD using either WinDVD or PowerDVD on the secondary display device. Further details can be found in topic number 737-28458
# Setting the display resolution to 1600x1200 or 2048x1563 no longer results in line flicker being noticed when resizing the media player. Further details can be found in topic number 737-28462
# Blinking video is no longer observed when using PowerDVD to playback 1080i content in the 30 FPS mode. Further details can be found in topic number 737-28463
Resolved issues for XP:
Quote
# Call of Duty 2: Setting the in-game resolution to 640x480 no longer results in visual static and interrupted audio during cinematic and within the menus. Further details can be found in topic number 737-28468
# Google Earth: The fog is displayed in the image no longer has a checkered effect. Further details can be found in topic number 737-28467
# Neverwinter Nights: Shadows of Undrentide no longer exhibits missing textures on characters under some circumstances on some hardware configurations. Further details can be found in topic number 737-28471
# Enabling CrossFire™ on a system containing the Radeon™ HD2900 XT no longer results in an error message and CrossFire™ not being enabled. Further information can be found in topic number 737-28188
# Launching the release notes under the Japanese or Chinese version of Windows no longer results in the release notes displaying a blank page. This issue may also be experienced under the Windows Vista operating system. Further details can be found in topic number 737-26749
# Pixilated corruption is no longer observed while running the game Prey while hovering over the health packs from a distance on some hardware configurations running Win XP. Further details can be found in topic number 737-27091
# The system no longer become unresponsive when randomly moving the Video Player window from primary to extended desktop under certain hardware configurations. This issue was known to occur when the second adapter is an ATI Radeon™ X1200/1250/1270 series of product. Further details can be found in topic number 737-27092
# Corruption is no longer noticed when playing certain DVD titles when hardware acceleration is enabled on ATI Radeon™ HD 2900 XT product. Further details can be found in topic number 737-27624
# Connecting a TV using an S-video cable and a CRT display device using a dual VGA adapter cable no longer results in intermittent noise being observed when playing a video using the Windows Media Player or a DVD using PowerDVD. Further details can be found in topic number 737-28469
# Playing a Blu-ray or HD-DVD no longer results in corruption being noticed if several application windows are open and the application windows are dragged around the desktop. Further details can be found in topic number 737-28470
# Connecting an HDTV using the Component Video connector no longer results in a double image being noticed when pressing the ALT+Enter keys. Further details can be found in topic number 737-28473
# Jittering is no longer noticed in cinepak video playback when using the Windows Media Player and having the desktop resolution set to 1280x1024 75Hz or higher. Further details can be found in topic number 737-28474

[SOLVED]Are X11 and AMD catalyst drivers friends again?

last time i installed linux on my laptop X11 had dropped support fro amd catalyst drivers (proprietary video card drivers), did amd do something about it? did X11 team reconsider? can i use the catalyst drivers on X11 again now? my laptop and it's stupid APU or "dual graphics" aren't playing so nice with the open source radeon drivers.
Last edited by rabcor (2013-06-20 19:16:00)

If wine supported skype, i would be more dead set on using linux than using the amd proprietary drivers.
The reason this isn't a big deal to me is mostly because i only use this laptop for 3 things, regardless of OS. Teamspeak 3, Skype, Playing Videos.
I have it set up on a dual boot because neither windows nor linux seem to be reliable on this laptop, the reason is hardware-side, this APU is driving me nuts.
The reason i'm having problems with the radeon drivers is that even if i set my computer to disable the "switchable graphics" on boot it sometimes seems to randomly re-enable it without even notifying me. The reason this is bad is because the switchable graphics cause my laptopt to overheat. If this happens in windows it usually just enters hibernation mode while the heat levels are just barely critical, in linux however it keeps running for a while at critical levels before it'll finally just overeat. I'm hoping that the AMD proprietary drivers can help me solve this on the linux side.
Whichever operating system i can manage to make stop ever using the switchable graphics (thus preventing all overheating) will be the one i will use in the end, but i'm not in any big rush, windows is working decently for me on the laptop right now, and i can patiently wait for the amd proprietary drivers to support X again, since i don't interact much with the computer at all anyways. Using linux would mostly just be to make the laptop look better. Linux seems to be the more likely one to succeed with this task in the end however (because i can optimize/customize it a whole lot more than i ever could windows, and because i'm scared of updating the catalyst drivers in windows because my laptop has often just completely broken upon catalyst driver update in windows.)

After virus problem I downloaded firefox from another browser and opened it to install. Firefox now asks permission to open each time I clik the icon. I then re

After virus problem which would not let all parts of the browser page open, I downloaded Firefox from another browser and opened it to install.
Firefox now asks permission to open each time I click the icon. I have shut off the computer and on several times. I then re-installed the browser but still it asks permission to open.
It seems to work again but can I get rid of opening permission request please? I may have 2 versions of the browser in the computer or the new program did not replace the old?
If I uninstall the program will I lose my bookmarks? Please can you help?

Mozilla Firefox stores all your personal settings, such as bookmarks, passwords and extensions, in a profile folder on your computer
*http://kb.mozillazine.org/Profile_backup
*https://support.mozilla.org/en-US/kb/back-and-restore-information-firefox-profiles
Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
'''Note:''' You might want to print these steps or view them in another browser.
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
#Delete the Firefox installation folder, which is located in one of these locations, by default:
#*'''Windows:'''
#**C:\Program Files\Mozilla Firefox
#**C:\Program Files (x86)\Mozilla Firefox
#*'''Mac:''' Delete Firefox from the Applications folder.
#*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
#Now, go ahead and reinstall Firefox:
##Double-click the downloaded installation file and go through the steps of the installation wizard.
##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
Please report back to see if this helped you!
Thank you.

HP Printer Wizard opens AMD Catalyst Install Manager to install HP Photosmart Basic Drivers

Similar Messages

Maybe you are looking for