HP Prme: Which functions only work in CAS mode???

I enter a simple substituion into Home mode:
subst(Y^5,Y=2) and I get " Error: Bad Arrgument Type"
I enter the same formula into the CAS mode after changing the letters to lower case and I get the result: 32
How does the user know which functions work in which modes: Home or CAS ?????
also is there a way to perform multitude substitutions at the same time ie subst(y^5+x^7,y=2,x=3) ????
thanks

The iMac G5 was one that had many power supply and bad capacitor issues. This sounds like one of them.
Come on. The poster says it works in safe mode, so how can it be a power supply problem?
Seems like a video chip problem to me. The solder worked loose over time in some machines. Re-solder for the brave.
You will have to translate this to 10.5.
You may have a problem with the video chip.
Here is how to tell...
Shutdown your machine. Hold down the shift key. Poweron. Bootup will be longer.
Wait awhile while you harddrive is being checked.
An article on how to boot into safe mode.
http://support.apple.com/kb/ht1455
Runs OK in safe mode...
Running in Safe mode leaves out some video drivers. Which results in your machine not using advanced video hardware. As luck would have it, you can run the safe mode video drivers in normal mode.
Here is how:
https://discussions.apple.com/message/16057567#16057567
Look through the above thread. See the second page. You don't have to read through the first page. Just go to the part where I try a solution that works.
Summary of G5 problems. Includes instructions on a hardware fix for the brave at heart:
See -Rotten Apple- articles in both of these threads.
https://discussions.apple.com/thread/4023152?tstart=0
https://discussions.apple.com/message/18700825#18700825
Robert

Similar Messages

MDX -Children count function Not working in Case statement

Hi,
I am trying to create set when you slice with the Hierarchy member is leaf level , I want a output only that Leaf level .
and When I slice with the parent level , it has to give all the members below that parent level.
But the problem here is when I select child member or leaf member , The first condition in the Case is not working
WITH SET
TESTSET AS
CASE
WHEN
[Dimension].[Hierarchy].currentmember.children.count<0
THEN
[Dimension].[Hierarchy].currentmember
ELSE
DESCENDANTS([Dimension].[Hierarchy].Currentmember,,AFTER)
END
SELECT
WBSSET ON 1,
{} on 0
FROM
(SELECT {[Dimension].[Hierarchy].&[10]} ON COLUMNS FROM [CubeName])
Thanks,
Santosh

Hi Santosh,
I don't think Children count function not working in case statement, I have tested it on my local environment, here s the sample query for you reference.
with member
testset as
case
when
[Geography].[Geography].currentmember.children.count<10
then "X"
else "OK"
end
select testset on 0,
{[Geography].[Geography].[Country].members} on 1
from
[Adventure Works]
In your scenario, the issue might be caused by the query isself, you can try to use IsLeaf Funcion to achieve your requirement. Please refer to the links below.
http://msdn.microsoft.com/en-us/library/ms144932.aspx
http://www.databasejournal.com/features/mssql/article.php/3633696/MDX-Operators-The-IsLeaf-Operator--Conditional-Logic-within--Calculations.htm
http://www.mdxpert.com/Functions/MDXFunction.aspx?f=22
Regards,
Charlie Liao
TechNet Community Support

Games only work if Game Mode is selec

Within Windows Vista 32bit (since I never play on XP anymore) I've noticed 2 games especially that if I have my mode selected to Entertainment vs Game mode that the games will crash; wont work.
Elder Scrolls IV: Oblivion and Diablo 2
Yes they are ALchemy Enabled so that might be the problem
But if I choose the mode "Entertainment" then load the game for something quick; I try and play it and nothing happens or the game crashes.
I've re loaded the game using "Game" mode and voila it works.
So my only conclusion is that these games "Diablo 2" and "Oblivion" will only work if?"Game" mode is selected is the reason why, is because they are ALchemy enabled games that they have to be set to "Game" to work?

ALchemy enabled games will only work if the card is in Game Mode. Trying to play them in Entertainment mode may result in the game exhibiting unpredictable behavior, like crashing.
The different modes actually change how the audio processing chip devotes its processing. By using ALchemy you are telling the particular game to use hardware accelerated openAL, which is only available in Game mode.
You'll find that using other nati've openAL games will have odd behavior if you try to play them in Entertainment mode, also.
Some games will play fine, just without surround sound or any extra EAX effects, if applicable. But other games just crash or have no sound, or funny-sounding sound.

Upgraded to osx10.8 and only works in safe mode

I just upgraded to osx10.8 and only works in safe mode! What now?

"works in safe mode" meaning you do not get instant kernel panic when you boot up, and instant kernel panics on boot-up were happening before? If this is the case, it may be that one (or more) of your third-party log-in items is incompatible with 10.8.

Itunes wont work.Says there has been a problem with the program and then shutsdown. only works using safe mode

Recently itunes stopped working. It will only work using safe mode. i have check the plug ins folder but i have no plug ins.

Hello MaFiosoXIII
For issues with iTunes crashing and only working in Safe Mode, then check out the article below to continue your troubleshooting to get it working again.
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/TS1717
Regards,
-Norm G.

My ipod will only work in disc mode

My iPod will only work in disc mode, when i take it off of disc mode it appears with the apple sign but nothing else -
help please.

Yes a Restore will erase your iPod. But this shouldn't be an issue since you obviously must have your music in your iTunes library or backed up somewhere else, RIGHT????? After all, it would be silly to have all your music on just the iPod and no where else, RIGHT?
Patrick

Monitor only works in safe mode

My monitor only works in safe mode. when restart in normal mode the monitor screen is blank. when I start in safe mode the monitor works fine.

Is there a reason you have not entered the menu as I have suggested and reset the monitor to factory default?
Your old school monitor needs a kick in the pants to remind it that it is plug n' play. That is essentially what the reset will do. It won't hurt anything.
Was the TV you had connected to the PC before using the monitor an HDTV one with 1080p resolution?
In order to reinstall the graphics driver you will need to be logged in as a user with elevated (admin) priveleges. A standard user cannot install drivers or programs. You do not heed to reinstall RAID drivers.
You might need to consider replacing the monitor with a modern LCD display. They are quite inexpensive these days and can evven be found in the second hand market.
If you don't want to do that then you can remove the video card and then connect the monitor VGA cable to the video output port on the rear of the desktop PC. Removing the card will enable the onboard video.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Canon MF4270 Scanning Function only works once

After my upgrading to 8.1 my canon MF4270 scanning function will only work one time when it is installed. Any subsequent boot (cold or warm) and it fails to work. The software (canon toolbox or windows scan) will just hang indefinitely. Sometimes
I get an error msg, sometimes I do not.
1. Have the latest driver from the Canon website
2. Tried reinstalling the driver several times
3. Tried the Windows scan utility
4. Tried different USB ports.
5. When I do get an error msg it is usually a "USB device is not recognized"
6. In Device Manager>Universal Serial Bus controllers>Unknown USB Device (Device Descriptor Request Failed
7. When I call up the properties for the yellow triangled usb device, event tab in the scrollable window:
Device USB\VID_0000&PID_0002\5&e658374&0&9 was configured.
Driver Name: usb.inf
Class Guid: {36FC9E60-C465-11CF-8056-444553540000}
Driver Date: 06/21/2006
Driver Version: 6.3.9600.16442
Driver Provider: Microsoft
Driver Section: BADDEVICE.Dev.NT
Driver Rank: 0xFF0000
Matching Device Id: USB\DEVICE_DESCRIPTOR_FAILURE
Outranked Drivers: usb.inf:USB\DEVICE_DESCRIPTOR_FAILURE:00FF2000
Device Updated: false
8. Also received a "
Windows has stopped this device because it has reported problems. (Code 43)
A request for the USB device descriptor failed."
9. Canon tech support stated it was an MS WIA service issue and not there problem.
10. Also tried compatibility routine.
We run a paperless office so this is pretty huge. Need your expertise.
Thank You!
* * * UPDATE: The above discussion was with the MFC4270 fully powered or in energy savings mode and PC fully powered. Any reboot of the PC would result in no scanner. Tried turning off the MFC, reboot the PC, then turn on the scanner, and
the scanner worked just fine. A subsequent reboot with MFC remaining on would fail the scanner. Any reboot with MFC off, then turned on after booting would work.
So something amiss with driver and/or USB.

Hi,
Code 43 means that a device driver notified the operating system that the device failed, this circumstance can occur if the device hardware fails or if the device driver fails.
To resolve this problem, take the following steps:
1. To open Device Manager, click Start, click Search programs and files, and then type Device Manager. A list of available matching items appears above the search box; click Device Manager.
2. Locate the malfunctioning device in the list of devices, right-click the device, and then click Uninstall. When a warning message appears that you are uninstalling a device from your system, click OK. Device manager uninstalls the device.
3. Right-click your computer name in Device Manager and click Scan for hardware changes. Device manager scans your system and automatically reinstalls your device.
4. Right-click the device and click Properties. On the General tab of the device Properties dialog box, in Device status, you should see the message This device is working properly.
For more troubleshooting steps you can find it here:
http://technet.microsoft.com/en-us/library/cc725873(v=ws.10).aspx
Regards
Wade Liu
TechNet Community Support

How can I transfer files from a 27" iMac which will only boot in safe mode?

My late 2009 27" imac is having issues and will only boot in safe mode. I have tried to transfer files to a new Imac using migration assistant but it wont let me. If I try booting the old Imac normally I just get a grey screen, I believe it is the video card failed and am waiting for a fix, but I would like to transfer files before the fix in case something goes wrong and I lose everything.
Any help would be great

Hello Myles, likely it is a Hardware problem.
One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
Reboot, test again.
If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or 3rd party add-on, Check System Preferences>Accounts>Login Items window to see if it or something relevant is listed.
Check the System Preferences>Other Row, for 3rd party Pref Panes.
Also look in these if they exist, some are invisible...
/private/var/run/StartupItems
/Library/StartupItems
/System/Library/StartupItems
/System/Library/LaunchDaemons
/Library/LaunchDaemons

Indesign CS6 only works in safe mode (windows 7)

I have installed the CS6 suite in Windows safe mode (after multiple attempts did not work in normal mode, it kept stopping at 2% installed) using the Adobe application manager. I am on a trial period, my company is going to start paying monthly after the first free month.
All the adobe products work ok (photoshop, illustrator, dreamweaver etc), except Indesign. When I double click the icon, the hourglass appear for a few seconds and nothing else.
If I double click the Indesign icon with Task manager open I can see that it appears as a 'process' for about 10 seconds, then disappears.
If I go into Safe mode Indesign will open and work but obviously this isn't ideal.
How can I fix this?
Any help would be great.
(I have done all the usual things, like uninstall the whole package & install again, restart etc. I also ran the Adobe suite cleaner tool incase old versions on this computer were interfering. I uninstalled everything, and deleted the Adobe folder etc.)
I am using Windows 7 Professional with a fast processor, 8gb ram.

Ability to run in safe mode but not in normal Windows operation could point to a conflict between InDesign and the driver for your graphics card. In safe mode, only a generic Windows video driver is used, regardless of your video card. Otherwise, whatever secret sauce driver provided by the provider of your video card is used. InDesign, as well as other Adobe applications, depends heavily on your video card and if your video card supports direct access to its GPU (if it has one), these applications make use of same.
See if there is an updated driver for your video card that you can download. From what I can see, some of the video card manufacturers almost have a driver du jour posted to fix various problems reported by users. If you have the latest driver, see if there are settings associated with “optimization” or “performance” via any control panel item or utility associated with the video card and try scaling those back. That might finesse the problem.
- Dov

Only works in safe mode

Help....I am only a novice mac user (so I need help in the most layman terms possible). Seems all my Apple products are going kaput; first one being my macbook (early 2008 model). Looks like my disk drive isnt working correctly; I put in a new hard drive.....I went to reinstall Snow Leopard then upgrade to Lion. Ever since then my mac only seems to work in safe mode. I used my imac to load snow leopard....(with firewire); and downloaded lion from app store. is there a way to wipe clean and start over? There is nothing on the computer that I need.....I keep all my important files on an external hard drive. my big concern is I dont know how to do it and second since I dont have a disk for lion will just going back to app store allow me to re-download or will I have to pay 30 bucks again. I have seen others have had similar issues...I just cant seem to figure this out. If anyone can help I will be eternally grateful!
Ray

When your in safe mode try going to the Disk Utility and doing a Disk Repair. Repair Permissions. Then see if that lets you boot normally. If that doesn't work you might need to reinstall Snow Leopard again then upgrade to Lion. (Lion will still be available under your App Store Purchases tab and you don't have to pay again).
I recommend you using Time Machine. Not only do you save yourself the trouble of copying things to your External Hard Drive, but if you run into something like this again restoring it from Time Machine saves you all the time you spend downloading Lion and Installing Snow Leopard. Plus everything is exactly how you last backed up. Everything!
Best of luck.
By the way, if you don't see the App Store when you install Snow Leopard just do a software update from the top left apple icon of your system and you should see it when its done.

NO CARRIER - Phone only works in 3G mode, and periodically loses signal

Hi.
Recently my iPhone 3GS has stopped working on the 2G network and has become somewhat unstable on the 3G.
After traveling i found my phone rendered semi-defect.
After a travel through 2 countries my phone stopped working on 2G network.
to be able to connect to a "roaming" provider the phone had to be in 3G mode.
the 2G mode is now not working at all.
Once in a while the 3G also sets out, and i have to put the phone in flight mode and back to be able to get a connection to the carrier. (this could be caused by a non 3G zone i guess).
I have done the following steps to try and resolve the issue.
1) do a general network reset (no resolve)
2) do a general phone reset (no resolve)
3) do a iTunes restore, where the phone was updated, and blanked (no resolve)
continue and restore the previous backup (no resolve)
phone is running OS 3.1.3
I have tried the SIM card in another phone, and the 2G works fine on the carrier side, so i dont find the SIM defective.
somehow i thing the phone has totally flipped the 2G settings, and i dont know how to resolve it.
anyone?
Message was edited by: moosematic

The internet isn't the problem. The phone really only works when I am in Wi-Fi. The data is the issue. Yes I have tried all of these resets, lost all of info on the phone and I am very fed up. This has been going on ever since the wonderful roll out of ios7. When I 1st did the upgrade it deactivated the phone, I had to go to the store, luckily they were able to fix that. Ever since then though the phone is worthless. My question at this point is more related to this being a phone issue or a Verizon issue. I live in 80207 (denver) and work in 80202 (downtown Denver). I would really just like to know if this is a network issue here, or if Apple just ruiend a perfectly good phone to get me to "upgrade."
Is this a Verizon issue or Apple issue?

Air Display 2 only worked on mirror mode not second monitor

I'm using PC Win 7 enterprise and IPAD Air. IPAD Air installed with Air Display 2.
The Air Display 2 only worked fine when on 'mirror mode', but not working as secondary monitor. IPAD display colour in 'blue' and able to activate the keybaord.
Need tips how to fix the problem to work as extended monitor.

Hi Nagesh,
    Please check the following sample programs. It uses splitter container. I think this suits your requirement.
RSDEMO_EASY_SPLITTER_CONTROL
RSDEMO_SPLITTER_CONTROL
Sample code:
       split_container_left type ref to cl_gui_container,
       split_container_right type ref to cl_gui_container,
       splitter_h type ref to cl_gui_splitter_container,
       splitter_v type ref to cl_gui_splitter_container,
create object splitter_h
          exporting
          parent = cl_gui_container=>screen0
          rows = 5
          columns = 5 .
split_container_left = splitter_h->get_container( row = 1 column = 1 ).
split_container_right = splitter_h->get_container( row = 1 column = 2 ).
        create object splitter_v
           exporting
           parent = split_container_left
           rows = 5
           columns = 5.
Please award points if this is useful.
Thanks,
Srinivas.

(TP A21m) Optical drives (CDRom, etc.) only work in safe mode after installing IBM RecordNow

Two days ago, I put in a new IBM CD-RW/DVD Combo IV drive into the Ultrabay 2000 slot of my TP A21m 2628, and using the accompanying IBM software CD, installed the IBM RecordNow program. After the re-boot, the operating system (Windows 2000 SP4) failed to recognize any of my internal or external optical drives. They all stopped working in normal mode. What happened? What is suddenly blocking all of my optical drives?
They all work perfectly fine in safe mode; my internal optical drives work perfectly when being tested by PC Doctor; they show up in the "Safely Remove Hardware" list; and Device Manager indicates that the drivers are installed, enabled and working properly. (However, there is no "+" next to CD drive in the boot sequence of the BIOS Setup Utility). The BIOS is the latest version, IBM/Lenovo drivers and software have been kept pretty much up-to-date, and the operating system was always kept up-to-date. I have run system file checker and so on.
I uninstalled the IBM RecordNow, removed the Combo drive and re-inserted the original CD-Rom drive, but that made no difference. So, with the Combo drive back in place and (using means other than the CD-drive) I reinstalled the original IBM RecordNow and proceeded to install the update from Lenovo (specified for my Combo drive and Windows 2000) in the hopes that the update would fix the bug. But, the update wouldn't install and no explanation was provided.
I am quite sure that it is not a hardware problem, particularly since everything is fine in safe mode and under PC Doctor. At a minimum, I would like to get my computer back to the way it was before I put in the Combo drive two days ago - with a working internal CD-Rom drive and a working external CD-RW drive. Right now I am without any optical drive functionality, like I was way back in mid-1990's. Thank you for your help.
Solved!
Go to Solution.

The problem has been fixed as follows: I modified the registry in accordance with the Microsoft instructions at http://support.microsoft.com/kb/270008/ : "... Remove the Upperfilters and Lowerfilters values completely from the following registry key: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}…"
After the reboot, the operating system once again recognized the optical drive. Having modified the registry, I then had to reinstall ITunes. After that, I successfully reinstalled the software from the IBM Software CD. Everything seems to be fine now.
(The update for the IBM RecordNow still refused to install, but I probably don't need it anyway. I have not bothered to check whether the external optical drive works or not, and I don't see any need to do so at this time.) Thank you

PowerPC g5 only work in safe mode

I have a PowerPC g5 running os x version 10.5.8 which has been working fine but the other day was not given the option to log in just a blue screen and some fan noise. I am able to use the mac in safe mode but that is it :-(

The iMac G5 was one that had many power supply and bad capacitor issues. This sounds like one of them.
Come on. The poster says it works in safe mode, so how can it be a power supply problem?
Seems like a video chip problem to me. The solder worked loose over time in some machines. Re-solder for the brave.
You will have to translate this to 10.5.
You may have a problem with the video chip.
Here is how to tell...
Shutdown your machine. Hold down the shift key. Poweron. Bootup will be longer.
Wait awhile while you harddrive is being checked.
An article on how to boot into safe mode.
http://support.apple.com/kb/ht1455
Runs OK in safe mode...
Running in Safe mode leaves out some video drivers. Which results in your machine not using advanced video hardware. As luck would have it, you can run the safe mode video drivers in normal mode.
Here is how:
https://discussions.apple.com/message/16057567#16057567
Look through the above thread. See the second page. You don't have to read through the first page. Just go to the part where I try a solution that works.
Summary of G5 problems. Includes instructions on a hardware fix for the brave at heart:
See -Rotten Apple- articles in both of these threads.
https://discussions.apple.com/thread/4023152?tstart=0
https://discussions.apple.com/message/18700825#18700825
Robert

HP Prme: Which functions only work in CAS mode???

Similar Messages

Maybe you are looking for