HP Pro 3130 MT Windows 7 How to use onboard VGA

There's got to be a simple solution to this. Our company recently took over another office and acquired several used PC's from them. Three of them are HP Pro 3130 MT workstations with Windows 7. These units have a built in VGA port and a DVI port. In addition they all have a separate video card installed, the HP 584217-001 ATI Radeon 4550.
I need these PC's to talk to "normal" VGA monitors, but since the onboard VGA will not work I presumed this was due to the ATI Radeon being installed and overriding the onboard VGA adapter. So, I removed the ATI Radeon card. Now the PC just beeps when it is booted. Still no VGA output. The HP 584217-001 also has a cable that converts it into two VGA ports. No luck when using this cable to connect with a VGA monitor, either.
How do I re-enable the onboard VGA adapter? I cannot see the BIOS as the display (VGA) will not work, so I can't make any BIOS setting changes. At this location there are no DVI capable monitors so I haven't tested whether or not the onboard DVI adapter is working.

Just so everyone knows...
Please take note of the specific processor which is included with your HP Pro 3130 MT.
HP Pro 3130 MT motherboards with specific processors do not have any onboard (integrated) graphics, although they still have the VGA and DVI connectors. This means that although you may remove the PCIe Graphics Card, you will not be able to be able to use a monitor with the onboard VGA or DVI (because there is no integrated graphics). This also means that you will not be able change your bios to onboard graphics (because there is no integrated graphics).
"NOTE: HP Pro 3130 with Intel Core i5 750 processor or any Intel i7 processor has no integrated
graphics."(1)
(1) Source: http://h18000.www1.hp.com/products/quickspecs/13640_ca/13640_ca.PDF
If you would like to know why, let me know. Thanks!
-Dave

Similar Messages

MOVED: How to use onboard VGA on 945GM2 with RX1300Pro graphics card plugged in?

This topic has been moved to Intel P4 & Celeron P4 based board.
https://forum-en.msi.com/index.php?topic=97199.0

Richard, 945GM2 doesn't have AGP bus anymore. It's PCIe.
However, it's a chipset "feature" that if you had a PCIe external display card hooked on, the chipset will disable the integrated graphics. There is no workaround.

2012 macbook pro retina display artifacts on screen when using onboard video

2012 Macbook Pro Retina Display artifacts on screen when using onboard video.
About a month ago I've noticed these strange artifacts (blocky pixelated looking) running vertically down the screen. It first started when using Safari. Then it started to happen all the time. I turned off the auto switch video in preferences, which I'm assuming forces the computer to use the separate video card and the artifacts go away.
On top of that issue I also have had the ghosting issue.
Anyone else have this problem?

artifacts onscreen could mean a faulty gpu. You said by forcing it on inbuilt gpu you do not find this issue highlights that. Do take it in to apple for service and also tell them of your ghosting issue.
There are a few retina owners who have faulty gpus.

Window Features , how to use it?

Hi!:
At Property Editor of a portal page I can see "Window Features" but I can't find documentation on what put in it or how to use it.
Can I put some argument to change the color of the page? (and only this particular page) something like "BGCOLOR" at html.
Thanks a lot.
RLS

I find it!.
Window Features: Specifies the appearance of the new window launched by an iView whose 'Launch in New Window' property is set to '1'. Enter a comma-separated list of Javascript parameter; for example: 'fullscreen=yes,toolbar=yes'. If empty, the new window apens according to default JavaScrit parameters

Re-building Satellite Pro A200 with Windows XP - How to

Hi,
I am seeking some assistance with regards to some A200 that i have just recieved.
They have come with Vista Home premium, but i attempting to re-build them using windows XP discs.
Once booting the machines from the disc and requesting to install windows XP, I get the following message:
Setup did not find any hard disk drives installed in your computer.
Make sure any hard disc drives are powered on and properly connected
to your computer, and that any disk-related hardware configuration is
correct. This may involve running a manufacturer-supplied diagnostic
or setup program.
Setup cannot continue. To quit setup, press F3
I have tried going into the BIOS to find the setting which alloys you to boot using simple hard drive settings but this option does not seem to be present, can any body help as this is quite an urgent issue.
Kind regards,
Kevin Bennett

Hi
It seems you need the SATA driver!!!
On the Toshiba page you should find the Intel Storage Manger. This is a SATA driver and it should be included during the XP setup procedure by pressing the F6 button.
Then you could include it from the external FDD drive
If you dont have a FDD drive then you could use the free software called nLite
By the way; why you don't use the search option in this forum for searching similar threads...

Windows Users how to use them in hfm

Hello wise pepole
I want to use the windows user as user in hfm. Could any body tell me how to do it or recomend me a document to read
thanks a lot
sofia

Shared Services admin guide would be good if you're wanting to do something like use MS Active Directory groups for HFM access rather than setting up native accounts for users.

How we use merge command in pro*C

merge command not support the pro*C pl/sql block how we use in pro*C (without creating any pl block on database )

hello shalab,
u can use dynamic sql method one.for execution merge query.
syntax is
EXEC SQL EXECUTE IMMEDIATE :stmt
u have to copy your query into one string.
like this
strcpy(stmt,"merge into emp_new a ");
strcat(stmt," using emp b ");
strcat(stmt,"on ( a.empno = b.empno) ");
strcat(stmt," when matched then ");
strcat(stmt," update set sal= sal*10 ");
strcat(stmt," when not matched then ");
strcat(stmt," insert (a.empno, a.ename) values ");
strcat(stmt," (b.empno, b.ename); ");
then execute like this.
EXEC SQL EXECUTE IMMEDIATE :stmt

I am using a MacBook Pro and when I open a new tab in Firefox it opens to Trovi. Mozilla has a forum but solutions are all for the PC/Windows. How do I remove it?

I am using a OSX MacBook Pro running Mavericks version 10.9.4 and using Firefox 30.0. My Mac has recently been hijacked by a program called "Trovi". Whenever I open a blank new tab in Firefox the tab opens it opens with Trovi. The Mozilla forums offer support but all solutions are for users who run Windows. How do I remove Trovi from my Mac? Please help.

Hey there! I answered this in another post a moment ago, this may be extremely helpful...I had the same problem until very recently with Trovi.
Re: Trovi Virus Removal Needed
Best of luck!

I partitioned my MacBook Pro and installed Windows 8 in it.....now I can't find my partition when I pressed option key when booting up.....so how can I do to find the partition to boot...I can see it in the disk manager in Mac....any ideas? thanks..!..

I partitioned my MacBook Pro and installed Windows 8 in it.....now I can't find my partition when I pressed option key when booting up.....so how can I do to find the partition to boot...I can see it in the disk manager in Mac....any ideas? thanks..!..

Hi LamboMong,
just try this:
http://refit.sourceforge.net
install, reboot twice and choose the Windows-Partition on next startup.
(The apple-bootloader doesn't display all bootable harddisks.
With rEFIt you can boot from all partitions/harddisks on your computer.)
I hope that will solve your problem.
Daniel Fernau

How to access my macbook pro from a windows pc?

how to access my macbook pro from a windows pc?

Depending on what you mean by "access" the following may help:
File sharing: How to connect with File Sharing on your Mac - Apple Support
One way (and there are others) for remote control and remote access between Mac and Windows: http://www.teamviewer.com/en/index.aspx

When i try to install windows 8 with bootcamp on my Macbook pro (early 2011) it says it only supports windows 7, how can i fix this?

When i try to install windows 8 with bootcamp on my Macbook pro (early 2011) it says it only supports windows 7, how can i fix this?

if your computer does not support the operating system you wish to install in bootcamp then you have to use a virtual machine like virtual box to install the operating system you wish to install

How to download Adobe Premiere pro CS5 for windows to my new imac 27 inch

How to download Adobe Premiere pro CS5 for windows to my new imac 27 inch

IMHO Windows would be the place to start.
Why do you want to load CS5 for Windows?
Adobe does produce a version of CS5 that runs on OS X so that it would not be necessary for you to have to screw around with Windows. Personally that would be the way to go and avoid the hassles of Windows.
Allan

Have an old version of Premiere Pro 1.5 (windows) i bought a new mac. i'd like to install this old version to my new computer. can i get a download program for my mac? how?

how can i install my old version of premiere pro 1.5 (windows) to my new Mac computer? is there a download?

Unfortunately, older versions of Adobe programs are not supported for platform swaps. You can read about it on the following page:
Order product | Platform, language swap

I have to use microsoft office 2007 and 2003 for windows and I'm using a macbook pro, How i can get the on mac?

I have to use microsoft office 2007 and 2003 for windows and I'm using a macbook pro, How i can get the on mac?

You can either use Office for Mac 2011 or use Boot Camp to run Windows or use a VM, such as Parallels Desktop to run Windows. Running Windows, you'd be able to use MS Office for Windows.
Clinton

I have heat issues into MacBook pro after installing windows 8. when boot from windows ha've overheating. how can I fix it??

Have heat issues into MacBook pro when boot from windows partition how can I fix it??

panarpan wrote:
Have heat issues into MacBook pro when boot from windows partition how can I fix it??
Are you saying you're running Windows in BootCamp or Windows as a Virtual Machine? You can increase the fan speed on the Mac using smcFanControl and use the software OGELTHORPE recommended to observe improvements.
smcFanControl is a Mac application and doesn't work in Windows, but if you set a higher minimum fan speed (which is how smcFanControl works) while running OS X, when you reboot into a BootCamp partition, that minimum speed tends to be carried over.

HP Pro 3130 MT Windows 7 How to use onboard VGA

Similar Messages

Maybe you are looking for