HP Pro Tablet 608 - Windows 10 - Power and Volume hardware buttons stopped working - Driver Issue

I upgraded my newly received HP Pro Tablet 608 to Windows 10 and now the power and volume buttons don't work anymore. The single press of Power button doesn't turn off the screen or put the tablet to sleep, plus the Volume button doesn't do anything either. I noticed that there are two drivers in the Device Manager that have errors:1) GPIO Buttons Driver (msgpiowin32.inf)2) HID Button Over Interrupt Driver (hidinterrupt.inf) I have tried disabling and enabling and updating driver software (it says they are up-to-date) but to no avail. I also Refreshed the PC but still have the same issue. I used the "Hardware and Device troubleshooter" and it worked, until I restarted the tablet and then it stopped working again. And now even the Troubleshooter is not able to fix it anymore. Disabling the Windows Defender didn't help either. Under the Driver properties for both "GPIO Buttons Driver (msgpiowin32.inf)" and "HID Button Over Interrupt Driver (hidinterrupt.inf)", under Device status I get the message "This device cannot find enough free resources that it can use (Code 12). If you want to use this device, you will need to disable one of the other devices on this system". Does this provide a clue on how to fix this? I am getting very frustrated with these issues with the tablet, and hoping for some help before my return window for the tablet runs out. Please help!

Hey @cjdean1983 ,
Welcome to the HP Forums!
I understand the touch screen has stopped responding on your Omni 10 tablet.
If you have already performed a recovery and BIOS update the only option I can provide is to contact phone support.
Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the following link to get the support number for your region: Phone Assist Worldwide.
Thanks!
Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
The Great Deku Tree
I work on behalf of HP.

Similar Messages

Hello i have a imac 8.1 and my volume down button stopped working..

hello i have a imac 8.1 and the volume down button stop working..
basically it seems that the f11 button is dead cause i can't make shortcut to this button anymore..
i had the maverick osx and i install some vst for ableton before that happend but i make format the disk and clean install the osx lion and it doesn't fix the problem.. any help ??

Very simple take it to an Apple Store or AASP and have it professionally diagnosed. Anything else would be guessing. Do NOT spend a penny on it until it is professionaly diagnosed otherwise you stand and excellent chance of throwing good money after bad.

TheThe "Zoom in" ( ) and "Zoom out" (-) buttons stopped working

The “Zoom in” and “Zoom out” buttons stopped working when I open a pdf file within Safari. I'd appreciate some direction as to what I should do.
Thanks,
Julio

Carolyn,
I downloaded and installed the Adobe plug in and it worked.
For those who may read this. I downloaded "AdbeRdr1013_en_US.dmg" from the link below:
http://www.adobe.com/support/downloads/detail.jsp?ftpID=5363/.
Have a nice day.
Julio

Touchpad cannot connect to PC after booting to USB mode using power and volume-up buttons

My Touchpad can connect via USB to PC while Web-OS is running OK, but when I reboot the Touchpad into USB mode the PC recognises it as a "Palm" device but cannot load drivers and thereofre it does not appear in "My Computer".
Post relates to: HP TouchPad (WiFi)
This question was solved.
View Solution.

Are you trying to run the webOS doctor?. Is this the first time, or has it worked before?
Here's my standard help file for doctoring a touchpad:
How to Doctor an HP TouchPad (reflash the ROM)
On your Touchpad be sure to have:
USB cable.
The battery is charged to at least 30%.
Computer:
Windows 7, Windows XP, Windows Vista
Available USB port (not a hub or secondary port).
Java 1.5 or later is installed. If you are not sure about what version of Java you have, or even if Java is installed, go to www.java.com and click the Do I have Java? link to install the latest version of Java.
210MB of storage space.
Internet connection.
Miscellaneous Info:
The update process will take approximately 15 minutes.
During this process, your device will not be available for use.
Downloading webOS Doctor
Download webOS Doctor on your desktop computer. If you have a webOS profile, get it from http://ws.hpwebos.com/webosdoctor/sorry.htm
If not, check the webOS Internals page: http://www.webos-internals.org/wiki/Webos_Doctor_Versions
Get your TouchPad ready to update
Hold the Power Button for several seconds until a menu appears.
Tap Shut Down to completely power down your device.
Running webOS Doctor
Double-click the file that was downloaded to run webOS Doctor.
Follow the on screen directions up until you are asked to connect your device.
Select the language you selected on your device, and click Next.
Confirm your language choice.
Click Accept to accept the terms of use.
Click Next. webOS Doctor checks your system. BE PATIENT! I've seen this part take a few minutes to complete.
After webOS Doctor finishes checking your system, you will be asked to connect your device.
Connecting your device and finishing the webOS Doctor update
Connect your device to your computer using the USB cable. You must connect your device directly to your computer, not through a USB hub or other intermediate device.
Now the tricky part. Hold the Volume Up button on the device and insert the USB cable. After the large USB symbol appears on screen, let go of the Volume Up button. If you see the HP logo instead of the large USB symbol, you may have let go of the Volume Up button prematurely. If this occurred , wait until your device boots up, shut down your device and then repeat step 2.
Windows will find your device and may offer to install two different drivers.
When asked to install drivers of OMAP, select No, not at this time.
When asked to install drivers for Palm Novacom (bootie), select Yes and let the drivers install. This may take a while. Once the drivers have been installed, the Next button will become available in webOS Doctor.
Click Next.
Do not disconnect your device from the computer during the update process.
When the Reset Complete screen appears, click Done.
Wait a few minutes for your device to reset.
You're done!
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

DV7-1279WM microphone and quick launch buttons stopped working

For some reason my quick launch buttons and microphone have stopped working on my DV7 laptop. I know that I recently used the microphone on a Skype call, but believe since that time that Vista SP2 was installed. I am not sure when the quick launch buttons were not working, but have just literally (talking less than a week ago) got the laptop back from HP for a warranty issue with the display. A strange thing I noticed is that if i look under the settings in Skype, the microphone will record a level for a split second, but then go back to nothing again (someone I was trying to talk to said they could hear me for a second).
I thought it might be the same problems as in the 35 page thread on here, but I have sound, its only the microphone and quick launch buttons that are not working. So far I have rolled back, installed and updated sound drivers, BIOS and Quick Launch software, but no luck.
Any suggestions? Thanks.

Sometimes electrical components needs to have all power sources removed and reintroduced to work properly. Try performing a hard reset first, if it doesn't work then we'll move to the next step.
To Perform A Hard Reset
Shut down the computer by going to the Start menu and selecting shut down. (If you have no display, hold the power button down for 5 seconds)
Disconnect the AC Adapter from the notebook.
Remove the battery from the bottom of the notebook. There will be a switch/button to eject the battery.
Wait at least 1 minute with all power sources disconnected.
Re-insert the battery and reconnect the AC Adapter and then attempt to power on the notebook.

The silent/ringer switch and the volume control buttons stopped working, how can I fix this or do I just need to get a new phone?

One day I relalized that the silent/ringer switch on my iPhone 4 stopped working. My phone is permently silent and I can't turn the ringer on. The speakers still work so they aren't the problem. Also, the volume controls on the side don't work either. Is this problem fixable or do I need to get a new phone?

you can try the restore first to make sure it is nothing software related. makesure to back up information and restore as new. after that it is hardware if your with in the limited hardware warranty and can be replaced for free if you are not then it can be replaced for 149$ if it is a iphone 4 or lower

★URGENT★ BLACKBERRY TORCH KEYBOARD TRACKPAD AND ALL OTHER BUTTONS NOT WORKING 9810

MY BLACKBERRY TORCH 9810 KEYBOARD AND CALL,ETC BUTTONS STOPPED WORKING.
My blackberry got ink at the top of the phone so I got a lightly wet tissue and cleaned the top part of the phone after I finished cleaning it, I recognised the keyboard stopped working. The touch screen still works but the physical keyboard and all other buttons have stopped working. Please help me, I really ened that phone for emergency uses, etc. I do not want to restore my phone so do not suggest that solution.
UPDATE: Right now I have my phone inside a bowl of uncooked rice.
UPDATE 2: 30 minutes later, I took the phone and rebooted it the keyboard still does NOT work but the trackpad can move up and down but when pressing it does nothing.
PLEASE HELP NEED URGENT HELP.

Hi and Welcome to the Community!
30 minutes is not enough...follow EXACTLY the instructions in this FAQ:
http://www.blackberryfaq.com/index.php/Got_Your_BlackBerry_Wet%3F
Also, prepare yourself for the worst...the only thing that is predictable about moisture intrusion into a BB is that the results will be unpredictable. Since you have already re-applied power to the BB too soon, it is much more likely that you have totally fried something inside.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Lumia 720 lock button and volume up button not wor...

HI ,
MY lumia 720 has gone useless. The volume up button stopped working some 4 months before, and God's grace the new 8.1 update helped, even though the button doesnt work now. From 2 weeks the lock button has also stopped working and now its completely stuck. Now calls keep coming, but unable to answer anything or make it silent, as it is stuck and cant even do anything. I will never recommend any one a Nokia phone in future.
Please some one suggest me a way to restart my phone with out using lock key.
P.S: Nokia:: please restart manufacturing nokia 1100, as it is far better than a useless smart phone.

Sorry to know about your issue with the device.
Connect your phone to a PC via USB and try this software recovery tool from the link below, remember the phone would completely reset
http://www.microsoft.com/en-in/mobile/support/product/lumia-720/softwareupdate/
Do update.
Happy To Help

I deactivated Acrobat 9 Pro from a Windows 8 laptop and installed it on a new Windows 8 laptop and got the error message "Invalid Serial Number." I am entitled to this installation, can someone help?

I deactivated Acrobat 9 Pro from a Windows 8 laptop and installed it on a new Windows 8 laptop and got the error message "Invalid Serial Number." I am entitled to this installation, can someone help?

I see that the number in my Adobe Account is a MAC serial number – I purchased both the Mac and Windows versions of the program. I tried to enter the serial number of the Windows version into my account and it says it’s already registered. But when I installed the Windows version on a Windows computer I got the invalid serial number message. They have two different serial numbers! Can you help me with this?

I have a MacBook Pro laptop purchased in June 2011, and the superdrive no longer works. Rather than have it replaced, I'll buy a 3rd party superdrive that plugs into the USB port. Does it need it's own power source, or will the USB port suffice?

I have a MacBook Pro laptop purchased in June 2011, and the superdrive no longer works. Rather than have it replaced, I'll buy a 3rd party superdrive that plugs into the USB port. Does the external superdrive need it's own power source, or will the USB port provide enough power?

The Apple external SuperDrive actually exceeds the allowed power draw. Because of this, it is only trouble-free on certain models that accommodate this excess.
All others require an external Power source.

I installed windows on my mackbook pro without downloading windows support software and now I am stuck on windows, How I can back to Mac os? To download the windows support software.

I installed windows on my macBook pro without downloading windows support software and now I am stuck on windows, How I can back to Mac os? To download the windows support software?

Boot your computer while holding down the option key. Then select OSx to boot into.

ITunes crashes when doing a power search. I get a Microsoft Visual C Runtime Library Error message: Program C:\Program Files (x86)\iTunes\iTunes.exe R6025. Pure virtual functional call. If I select ok, Windows 7 pops up with iTunes has stopped working

iTunes crashes when doing a power search. I get a Microsoft Visual C Runtime Library Error message: Program C:\Program Files (x86)\iTunes\iTunes.exe R6025. Pure virtual functional call. If I select ok, Windows 7 pops up with iTunes has stopped working and then it shuts iTunes down. Anyone else every have this issue. Any ideas on a fix?
Thanks,

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

Okay before my ipod power and volume buttons werent working but i never dropped it, then one day i was in a app and my ipod froze so i held the home button down and the screen went a bright green color and isnt showing up in itunes

okay I just recently bought a ipod touch 4thG and im already having issues. recently the power and volume buttons stopped working after i syncd my ipod, i shrugged it off figuring it would come back i could live without it. but today I was on my ipod while it was charging and the screen just froze so i pressed and held the home button (being that's the only button that actually works) then the screen turned this bright yellowish lime green color and its not responding to ANYTHING! my computer isnt even reading it when i plug it up into itunes! so what should i do? can anyone help me? i feel like i just wasted $200...

Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

I have a Macbook Pro that I have just renewed and transferred over my old hard drive (also from a Macbook Pro). Now when I turn on the computer and ITunes opens I get error (-50) and then error 5002 when I try to sign in to ITunes Store - Help!

I have a Macbook Pro that I have just renewed and transferred over my old hard drive (also from a Macbook Pro). Now when I turn on the computer and ITunes opens I get error (-50) and then error 5002 when I try to sign in to ITunes Store - Help!
My dealer has tried and failed (twice) to correct this and I have tried deleting the two items in the Itunes folder but no luck!

were you able to get help on this? I need help on error 5002 as well. thank you

I have Adobe CS4..... now when I want to print my picture, I get the message "Adobe CS4 has stopped working, sending issue to windows and then disappears.... nothing can print anymore...Help??

I have Adobe CS4..... now when I want to print my picture, I get the message "Adobe CS4 has stopped working, sending issue to windows and then disappears.... nothing can print anymore...Help??

Try updating the printer driver.

HP Pro Tablet 608 - Windows 10 - Power and Volume hardware buttons stopped working - Driver Issue

Similar Messages

Maybe you are looking for