Hp probook 4420s windows 7 32bit, bios upgrade total failure.Black Screen only

 i recently aquired an old laptop,i reistalled windows 7 32bit and intalled all drivers afresh the laptop was okay until i noticed the fun was constantly spining too fast so, i thought to upgrage the bios because it was several versions behind.
before i tried to upgrade i checked the current version and it was
Bios : 68AHH Ver F.09
Bios date : 6/29/2010
During installation from windows it did some sort of backup then after a few seconds of installing something it Shutdown without warning.when i tried to switch it on it nothing happens except for
'caps lock' continously blinking and wifi light is just on.
i have read some posts.like using the 'windows button + B'  or 'fn+B' but nothing realy happens , i have also removed the CMOS battery and put it back again but nothing changes still the black screen.
Please assist with the correct procedure to recover the bios.
Also Just to mention the bios had no password before upgrade.

 My laptop sat at BestBuy from Friday night until today (10-31-12)! They couldn't figure out how to fix the problem so I finally told them to revert my latop back to Windows 7! I hope HP reads these and will hurry up and make the updates needed so that I can run Windows 8 on my Laptop! I just bought mine in July of last year there is nothing wrong with it and after dropping about $1200.00 for my dv7-4285dx along with the Best Buy Geek Squad package I do not feel like having to drop more money into another laptop!! PLEASE HURRY AND FIX THIS I DIDN"T DROP $69.99 plus tx to not be able to use Windows 8! Even before I did the upgrade I had the GEEk Squad check to make sure I could make the upgrade and was told this laptop well surpasses the required minium to run Windows 8!!!!!!

Similar Messages

  • Probook 470 windows 8.1 upgrade to windows 10, any driver compatible issue?

    Probook 470 windows 8.1 upgrade to windows 10, any driver compatible issue?

    Hi,
    First I assume there is a bluetooth module inside your computer. 
    If so please test to reinstall its driver. To get a driver for the device, you need to know the brand and model of your computer or your motherboard.
    Generally computer manufacturers will provide all drivers for their computers on their website. Search with your computer model on manufacturer's website could help you get a proper driver. If failed, search your motherboard from its manufacturer instead
    will also help.
    After that, uninstall your bluetooth module from Device Manager and install the driver you just downloaded, reboot to see the result.
    Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Cannot reinstall windows 10 Technical preview after getting black screen at start. will not let format drive or install

    cannot reinstall windows 10 Technical preview after getting black screen at start. will not let format drive or install

    you may need to use a DVD from an earlier version of Windows or slave the disk to wipe it with disk manager
    Place your rig specifics into your signature like I have, makes it 100x easier!
    Hardcore Games Legendary is the Only Way to Play!
    Vegan Advocate How can you be an environmentalist and still eat meat?

  • Windows 8 HP Pavilion dv7-4285dx Upgrade results in black screen after intallation finalizes.

    I have a 2011 HP Pavilion dv7-4285dx with Windows 7 64 bit Home premium installed.  The notebook/laptop has a AMD Radeon HD 6300M series display adapter with driver version 9.2.2.0 dated 9/27/2012 and an ATI technologies Intel HD Graphics display adapter with driver version 8.7771.1.0.  The notebook/laptop has not had a hardware upgrade and contiains the orignal factory OS. BIOS is current to latest available.
    The issue I had while upgrading to Windows 8 is after the install finalizes (settings and preferences are entered) and the system boots to the tiles screen, the display works fine.  Clicking to the desktop works only for a few moments before the screen goes dark. Pressing the power button and/or closing/opening the lid results in at times a black screen (no power to the screen) or black screen (power to the screen) or a black screen where only the mouse pointer is visible and moves around the screen.  Restarting the computer results in a repeat of the issue at times while other times it will boot directly to what appears to be the windows desktop. You can interact with the file folder icon on the task bar as well as internet explorer, and you can get the charms bar and tile screen. Any attempt to open computer management or any control panel or task manager will open the window as an icon on the task bar.  You can mouseover the icon to "preview" a small version of the window but you can not click on it to maximize.
    I attempted the following workarounds:
    1) Clean install of Windows 8: Installs but fails with same result as above
    Refresh PC from windows 8 rescue media: Works slightly longer until AMD driver fails and then reverts to situation above. 
    2) Uninstalling all display adapters (via computer management) and then upgrading to Windows 8: Results in microsoft drivers getting installed, works much as refresh above until AMD driver fails and then reverts to above situation.
    3) In Scenarios 1 and 2,  I also tried to use windows update within Win8 to update the drivers there are updated MS drivers available ,(dated as late as 10/27/2012) but intalling those drivers also resulted in a failure of the adapter within a short period of time as did NOT updating the drivers.
    4) Disabling display adapters and then restarting:  Results in a BSOD (Blue Screen) IRQL_NOT_LESS_OR_EQUAL Stop: 0x0000000A error during boot as the OS runs into trouble with the driver before Windows 7 boots.  This happens if one or both drivers are disabled.
    5) Disabling display adapters before in-place upgrade to Windows 8 results in the Windows 8 equivalent of a BSOD and results in the system shutting down and then reverting to Windows 7.
    Through research, I determined some ppl had luck connecting another monitor/HD TV through VGA/HDMI and then using the function-screen button to switch, with my system this resulted in the same issue displayed on the TV/Monitor. There are also updates to ATI and Catalyst center available including drivers and installing these do not remedy the issue. Intel was checked and there are no drivers available as HP uses a "custom" driver for intel.  Attempting to install any of these Intel drivers will result in a fail with a compatiblity error.
    Windows 8 has no safe mode ability from the windows 8 rescue media disk, you cannot F-8 as you could in the preview. Safe mode must be reached via charms, settings, startup and then selecting safe mode as a boot option, which is not available as the display adapter malfunctions.  In those scenarios where I was able to get a windows desktop to boot up as in the first paragaph I can get to the restart settings via charms, but clicking to bring up the restart menu requires another window to open which is only visible as a "preview" on the windows task bar.
    if you are going to attempt to try any of these,
    1) Use a third party software to image your pre-win 8 upgrade system that you can boot into from USB or CD;
    2) Before starting the process, disable the UAC prompt and remove any passwords from logon, as those things will require you to interact with the OS and you will not be able to do this when the adapters fail.  The screen will shadow out as it usually does but the prompt will not be viewable.
    3) Create an ISO image of the Win8 install media and write down the product key. If you are able to get a successful boot, before the drivers fail, create a Windows 8 rescue media disk.
    I spoke with HP tech support this morning (10/29/2012) they are aware of the issues and they lie with the display adapters.  They are working toward a solutuion but there are none available at this time and no date when they will be available.  They recommend checking the support website and having the web page autoscan your PC as the drivers will show there when they are posted and they will be installable from Windows 7 so there will be no issue with upgrading to Windows 8.  Bottom line, do not upgrade to Windows 8 at this time.
    MS Tech support escalation tier reps also informed me there is no present workaround available.
    Hope this helps and saves somebody some time!
    JJ

     My laptop sat at BestBuy from Friday night until today (10-31-12)! They couldn't figure out how to fix the problem so I finally told them to revert my latop back to Windows 7! I hope HP reads these and will hurry up and make the updates needed so that I can run Windows 8 on my Laptop! I just bought mine in July of last year there is nothing wrong with it and after dropping about $1200.00 for my dv7-4285dx along with the Best Buy Geek Squad package I do not feel like having to drop more money into another laptop!! PLEASE HURRY AND FIX THIS I DIDN"T DROP $69.99 plus tx to not be able to use Windows 8! Even before I did the upgrade I had the GEEk Squad check to make sure I could make the upgrade and was told this laptop well surpasses the required minium to run Windows 8!!!!!!

  • After pacman -Syu upgrade xfce boots black screen cursor

    Hello,
    I've recently upgraded the system with pacman -Syu and it seem something has gone wrong with new xfce 4.12. I have changed DM from slim to lxdm and can only boot to openbox but not xfce. I also switch to tty2 and try a startx with ~/.xinitrc file with exec startxfce4 but it does not launch properly. What I mean is both the display manager and a startx boots me into a black screen with a cursor when i try to launch xfce. Again I can boot to openbox just fine. I've searched for similar topics but cant seem to find any solution. Can anyone help?
    [ 18.673]
    X.Org X Server 1.17.1
    Release Date: 2015-02-10
    [ 18.673] X Protocol Version 11, Revision 0
    [ 18.673] Build Operating System: Linux 3.18.6-1-ARCH x86_64
    [ 18.673] Current Operating System: Linux arch-server 3.14.35-1-lts #1 SMP Sat Mar 7 19:24:12 CET 2015 x86_64
    [ 18.674] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux-lts root=UUID=d6352b14-5ca7-476a-9f43-2bc25278effd rw quiet
    [ 18.674] Build Date: 14 March 2015 06:45:50PM
    [ 18.674]
    [ 18.674] Current version of pixman: 0.32.6
    [ 18.674] Before reporting problems, check [url]http://wiki.x.org[/url]
    to make sure that you have the latest version.
    [ 18.674] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 18.674] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Mar 17 03:38:39 2015
    [ 18.937] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 19.047] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
    [ 19.553] (==) No Layout section. Using the first Screen section.
    [ 19.553] (**) |-->Screen "Default Screen" (0)
    [ 19.553] (**) | |-->Monitor "<default monitor>"
    [ 19.586] (==) No monitor specified for screen "Default Screen".
    Using a default monitor configuration.
    [ 19.586] (==) Automatically adding devices
    [ 19.586] (==) Automatically enabling devices
    [ 19.586] (==) Automatically adding GPU devices
    [ 20.294] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/OTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/
    [ 20.294] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 20.294] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 20.354] (II) Loader magic: 0x815d80
    [ 20.354] (II) Module ABI versions:
    [ 20.354] X.Org ANSI C Emulation: 0.4
    [ 20.354] X.Org Video Driver: 19.0
    [ 20.354] X.Org XInput driver : 21.0
    [ 20.354] X.Org Server Extension : 9.0
    [ 20.356] (EE) systemd-logind: failed to get session: PID 940 does not belong to any known session
    [ 20.357] (II) xfree86: Adding drm device (/dev/dri/card0)
    [ 20.359] (--) PCI:*(0:1:5:0) 1002:9616:1462:7641 rev 0, Mem @ 0xd0000000/268435456, 0xfebe0000/65536, 0xfea00000/1048576, I/O @ 0x0000d000/256
    [ 20.359] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 20.422] (II) "glx" will be loaded by default.
    [ 20.423] (II) LoadModule: "vnc"
    [ 20.568] (II) Loading /usr/lib/xorg/modules/extensions/libvnc.so
    [ 22.029] (II) Module vnc: vendor="Constantin Kaplinsky"
    [ 22.029] compiled for 1.17.1, module version = 1.0.0
    [ 22.029] Module class: X.Org Server Extension
    [ 22.029] ABI class: X.Org Server Extension, version 9.0
    [ 22.029] (II) LoadModule: "glx"
    [ 22.030] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 24.054] (II) Module glx: vendor="X.Org Foundation"
    [ 24.208] compiled for 1.17.1, module version = 1.0.0
    [ 24.208] ABI class: X.Org Server Extension, version 9.0
    [ 24.208] (==) AIGLX enabled
    [ 24.208] (==) Matched ati as autoconfigured driver 0
    [ 24.208] (==) Matched ati as autoconfigured driver 1
    [ 24.208] (==) Matched modesetting as autoconfigured driver 2
    [ 24.208] (==) Matched fbdev as autoconfigured driver 3
    [ 24.208] (==) Matched vesa as autoconfigured driver 4
    [ 24.208] (==) Assigned the driver to the xf86ConfigLayout
    [ 24.208] (II) LoadModule: "ati"
    [ 24.261] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
    [ 24.332] (II) Module ati: vendor="X.Org Foundation"
    [ 24.332] compiled for 1.17.0, module version = 7.5.0
    [ 24.332] Module class: X.Org Video Driver
    [ 24.332] ABI class: X.Org Video Driver, version 19.0
    [ 24.332] (II) LoadModule: "radeon"
    [ 24.333] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
    [ 24.765] (II) Module radeon: vendor="X.Org Foundation"
    [ 24.765] compiled for 1.17.0, module version = 7.5.0
    [ 24.765] Module class: X.Org Video Driver
    [ 24.765] ABI class: X.Org Video Driver, version 19.0
    [ 24.765] (II) LoadModule: "modesetting"
    [ 24.765] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
    [ 24.878] (II) Module modesetting: vendor="X.Org Foundation"
    [ 24.878] compiled for 1.17.1, module version = 1.17.1
    [ 24.878] Module class: X.Org Video Driver
    [ 24.878] ABI class: X.Org Video Driver, version 19.0
    [ 24.878] (II) LoadModule: "fbdev"
    [ 24.878] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
    [ 25.005] (II) Module fbdev: vendor="X.Org Foundation"
    [ 25.005] compiled for 1.17.0, module version = 0.4.4
    [ 25.005] Module class: X.Org Video Driver
    [ 25.005] ABI class: X.Org Video Driver, version 19.0
    [ 25.005] (II) LoadModule: "vesa"
    [ 25.006] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
    [ 25.099] (II) Module vesa: vendor="X.Org Foundation"
    [ 25.099] compiled for 1.17.0, module version = 2.3.2
    [ 25.099] Module class: X.Org Video Driver
    [ 25.099] ABI class: X.Org Video Driver, version 19.0
    [ 25.099] (II) RADEON: Driver for ATI Radeon chipsets:
    ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
    ATI Radeon Mobility X300 (M24) 3152 (PCIE),
    ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
    ATI Radeon X600 (RV380) 3E50 (PCIE),
    ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
    ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
    ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
    ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
    ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
    ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
    ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
    ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
    ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
    ATI Radeon 8500 AIW BB (AGP), ATI Radeon IGP320M (U1) 4336,
    ATI Radeon IGP330M/340M/350M (U2) 4337,
    ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
    ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
    ATI Radeon X800PRO (R420) JI (AGP),
    ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
    ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
    ATI Radeon Mobility 9800 (M18) JN (AGP),
    ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
    ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
    ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
    ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
    ATI Radeon Mobility M7 LW (AGP),
    ATI Mobility FireGL 7800 M7 LX (AGP),
    ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
    ATI FireGL Mobility 9000 (M9) Ld (AGP),
    ATI Radeon Mobility 9000 (M9) Lf (AGP),
    ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI FireMV 2400 PCI,
    ATI Radeon 9700 Pro ND (AGP), ATI Radeon 9700/9500Pro NE (AGP),
    ATI Radeon 9600TX NF (AGP), ATI FireGL X1 NG (AGP),
    ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP),
    ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP),
    ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
    ATI Radeon Mobility 9600 (M10) NQ (AGP),
    ATI Radeon Mobility 9600 (M11) NR (AGP),
    ATI Radeon Mobility 9600 (M10) NS (AGP),
    ATI FireGL Mobility T2 (M10) NT (AGP),
    ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
    ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
    ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
    ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
    ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
    ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
    ATI Radeon Mobility X300 (M22) 5460 (PCIE),
    ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
    ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
    ATI Radeon X800PRO (R423) UI (PCIE),
    ATI Radeon X800LE (R423) UJ (PCIE),
    ATI Radeon X800SE (R423) UK (PCIE),
    ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
    ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
    ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
    ATI FireGL unknown (R423) UR (PCIE),
    ATI FireGL unknown (R423) UT (PCIE),
    ATI Mobility FireGL V5000 (M26) (PCIE),
    ATI Mobility FireGL V5000 (M26) (PCIE),
    ATI Mobility Radeon X700 XL (M26) (PCIE),
    ATI Mobility Radeon X700 (M26) (PCIE),
    ATI Mobility Radeon X700 (M26) (PCIE),
    ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
    ATI Radeon Mobility 9100 IGP (U3) 5835,
    ATI Radeon XPRESS 200 5954 (PCIE),
    ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
    ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
    ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
    ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
    ATI Radeon XPRESS 200M 5975 (PCIE),
    ATI Radeon XPRESS 200 5A41 (PCIE),
    ATI Radeon XPRESS 200M 5A42 (PCIE),
    ATI Radeon XPRESS 200 5A61 (PCIE),
    ATI Radeon XPRESS 200M 5A62 (PCIE),
    ATI Radeon X300 (RV370) 5B60 (PCIE),
    ATI Radeon X600 (RV370) 5B62 (PCIE),
    ATI Radeon X550 (RV370) 5B63 (PCIE),
    ATI FireGL V3100 (RV370) 5B64 (PCIE),
    ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
    ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
    ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
    ATI Mobility Radeon X800 XT (M28) (PCIE),
    ATI Mobility FireGL V5100 (M28) (PCIE),
    ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
    ATI Radeon X850 XT PE (R480) (PCIE),
    ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
    ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
    ATI Radeon X850 XT (R480) (PCIE),
    ATI Radeon X800XT (R423) 5D57 (PCIE),
    ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
    ATI Radeon X700 PRO (RV410) (PCIE),
    ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
    ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
    ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
    ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
    ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
    ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
    ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
    ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
    ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
    ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
    ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
    ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
    ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
    ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
    ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
    ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
    ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
    ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
    ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
    ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
    ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
    ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
    ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
    ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
    ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
    ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
    ATI Mobility Radeon X1700, ATI Radeon X2300HD,
    ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
    ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
    ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
    ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
    ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
    ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
    ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
    ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
    ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
    ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
    ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
    ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
    ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
    ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
    ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
    ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
    AMD FireStream 9250, ATI FirePro V8700 (FireGL),
    ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
    ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
    ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
    ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),
    ATI Mobility Radeon HD 4670, ATI FirePro M5750,
    ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),
    ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
    ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
    ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
    ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
    ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
    ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
    ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
    ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
    ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
    ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
    ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
    ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
    ATI Mobility Radeon HD 3850 X2, ATI RV670,
    ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
    ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
    ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
    ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,
    ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
    ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,
    ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
    ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
    ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
    ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
    ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
    ATI FireGL V3600, ATI Radeon HD 2600 LE,
    ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
    ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
    ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
    ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
    ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
    ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
    ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
    ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
    ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
    ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
    ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
    ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
    ATI Radeon 3000 Graphics, SUMO, SUMO, SUMO2, SUMO2, SUMO2, SUMO2,
    SUMO, SUMO, SUMO2, SUMO, SUMO, SUMO, SUMO, SUMO, ATI Radeon HD 4200,
    ATI Radeon 4100, ATI Mobility Radeon HD 4200,
    ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,
    AMD Radeon HD 6310 Graphics, AMD Radeon HD 6310 Graphics,
    AMD Radeon HD 6250 Graphics, AMD Radeon HD 6250 Graphics,
    AMD Radeon HD 6300 Series Graphics,
    AMD Radeon HD 6200 Series Graphics, PALM, PALM, PALM, CYPRESS,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
    AMD Firestream 9350, ATI Radeon HD 5800 Series,
    ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
    ATI Radeon HD 5800 Series, ATI Radeon HD 5900 Series,
    ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
    ATI Mobility Radeon HD 5800 Series,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
    ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
    ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
    ATI Mobility Radeon HD 5000 Series,
    ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
    ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
    ATI Mobility Radeon HD 5000 Series,
    ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon Graphics,
    ATI Mobility Radeon Graphics, CEDAR,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter, ATI FirePro 2270, CEDAR,
    ATI Radeon HD 5450, CEDAR, CEDAR, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
    CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
    AMD Radeon HD 6900 Series, AMD Radeon HD 6900 Series, CAYMAN, CAYMAN,
    CAYMAN, AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series,
    BARTS, BARTS, Mobility Radeon HD 6000 Series,
    Mobility Radeon HD 6000 Series, BARTS, BARTS, BARTS, BARTS,
    AMD Radeon HD 6800 Series, AMD Radeon HD 6800 Series,
    AMD Radeon HD 6700 Series, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
    TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
    TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
    CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS,
    CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, ARUBA, ARUBA,
    ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
    ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
    ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
    ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, TAHITI, TAHITI, TAHITI, TAHITI,
    TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI,
    TAHITI, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,
    PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,
    VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE,
    VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE,
    VERDE, VERDE, VERDE, VERDE, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND,
    OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND,
    HAINAN, HAINAN, HAINAN, HAINAN, HAINAN, HAINAN, BONAIRE, BONAIRE,
    BONAIRE, BONAIRE, BONAIRE, BONAIRE, BONAIRE, BONAIRE, BONAIRE,
    BONAIRE, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI,
    KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI,
    KABINI, MULLINS, MULLINS, MULLINS, MULLINS, MULLINS, MULLINS,
    MULLINS, MULLINS, MULLINS, MULLINS, MULLINS, MULLINS, MULLINS,
    MULLINS, MULLINS, MULLINS, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI,
    KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI,
    KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI,
    KAVERI, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII,
    HAWAII, HAWAII, HAWAII, HAWAII, HAWAII
    [ 25.111] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
    [ 25.111] (II) FBDEV: driver for framebuffer: fbdev
    [ 25.111] (II) VESA: driver for VESA chipsets: vesa
    [ 25.111] (++) using VT number 7
    [ 25.184] (II) [KMS] Kernel modesetting enabled.
    [ 25.184] (WW) Falling back to old probe method for modesetting
    [ 25.184] (WW) Falling back to old probe method for fbdev
    [ 25.184] (II) Loading sub module "fbdevhw"
    [ 25.184] (II) LoadModule: "fbdevhw"
    [ 25.184] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
    [ 25.280] (II) Module fbdevhw: vendor="X.Org Foundation"
    [ 25.280] compiled for 1.17.1, module version = 0.0.2
    [ 25.280] ABI class: X.Org Video Driver, version 19.0
    [ 25.280] (WW) Falling back to old probe method for vesa
    [ 25.280] (II) RADEON(0): Creating default Display subsection in Screen section
    "Default Screen" for depth/fbbpp 24/32
    [ 25.280] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
    [ 25.280] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
    [ 25.280] (==) RADEON(0): Default visual is TrueColor
    [ 25.280] (==) RADEON(0): RGB weight 888
    [ 25.280] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
    [ 25.280] (--) RADEON(0): Chipset: "ATI Radeon 3000 Graphics" (ChipID = 0x9616)
    [ 25.280] (II) Loading sub module "dri2"
    [ 25.280] (II) LoadModule: "dri2"
    [ 25.280] (II) Module "dri2" already built-in
    [ 25.280] (II) Loading sub module "exa"
    [ 25.280] (II) LoadModule: "exa"
    [ 25.281] (II) Loading /usr/lib/xorg/modules/libexa.so
    [ 25.406] (II) Module exa: vendor="X.Org Foundation"
    [ 25.406] compiled for 1.17.1, module version = 2.6.0
    [ 25.406] ABI class: X.Org Video Driver, version 19.0
    [ 25.406] (II) RADEON(0): KMS Color Tiling: enabled
    [ 25.406] (II) RADEON(0): KMS Color Tiling 2D: enabled
    [ 25.406] (II) RADEON(0): KMS Pageflipping: enabled
    [ 25.406] (II) RADEON(0): SwapBuffers wait for vsync: enabled
    [ 25.440] (II) RADEON(0): Output VGA-0 has no monitor section
    [ 25.471] (II) RADEON(0): Output HDMI-0 has no monitor section
    [ 25.510] (II) RADEON(0): EDID for output VGA-0
    [ 25.541] (II) RADEON(0): EDID for output HDMI-0
    [ 25.541] (II) RADEON(0): Manufacturer: BBY Model: bb20 Serial#: 16843009
    [ 25.541] (II) RADEON(0): Year: 2012 Week: 0
    [ 25.541] (II) RADEON(0): EDID Version: 1.3
    [ 25.541] (II) RADEON(0): Digital Display Input
    [ 25.541] (II) RADEON(0): DFP 1.x compatible TMDS
    [ 25.541] (II) RADEON(0): Max Image Size [cm]: horiz.: 44 vert.: 25
    [ 25.541] (II) RADEON(0): Gamma: 2.20
    [ 25.541] (II) RADEON(0): DPMS capabilities: Off
    [ 25.541] (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    [ 25.541] (II) RADEON(0): First detailed timing is preferred mode
    [ 25.541] (II) RADEON(0): redX: 0.645 redY: 0.331 greenX: 0.335 greenY: 0.621
    [ 25.541] (II) RADEON(0): blueX: 0.152 blueY: 0.053 whiteX: 0.313 whiteY: 0.329
    [ 25.541] (II) RADEON(0): Supported established timings:
    [ 25.541] (II) RADEON(0): 720x400@70Hz
    [ 25.541] (II) RADEON(0): 640x480@60Hz
    [ 25.541] (II) RADEON(0): 640x480@67Hz
    [ 25.541] (II) RADEON(0): 640x480@72Hz
    [ 25.541] (II) RADEON(0): 640x480@75Hz
    [ 25.541] (II) RADEON(0): 800x600@56Hz
    [ 25.541] (II) RADEON(0): 800x600@60Hz
    [ 25.541] (II) RADEON(0): 800x600@72Hz
    [ 25.541] (II) RADEON(0): 800x600@75Hz
    [ 25.541] (II) RADEON(0): 832x624@75Hz
    [ 25.542] (II) RADEON(0): 1024x768@60Hz
    [ 25.542] (II) RADEON(0): 1024x768@70Hz
    [ 25.542] (II) RADEON(0): 1024x768@75Hz
    [ 25.542] (II) RADEON(0): 1280x1024@75Hz
    [ 25.542] (II) RADEON(0): 1152x864@75Hz
    [ 25.542] (II) RADEON(0): Manufacturer's mask: 0
    [ 25.542] (II) RADEON(0): Supported standard timings:
    [ 25.542] (II) RADEON(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
    [ 25.542] (II) RADEON(0): #1: hsize: 1152 vsize 864 refresh: 75 vid: 20337
    [ 25.542] (II) RADEON(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513
    [ 25.542] (II) RADEON(0): #3: hsize: 1440 vsize 900 refresh: 75 vid: 3989
    [ 25.542] (II) RADEON(0): #4: hsize: 1440 vsize 900 refresh: 60 vid: 149
    [ 25.542] (II) RADEON(0): #5: hsize: 1280 vsize 720 refresh: 60 vid: 49281
    [ 25.542] (II) RADEON(0): Supported detailed timing:
    [ 25.542] (II) RADEON(0): clock: 97.8 MHz Image Size: 442 x 249 mm
    [ 25.542] (II) RADEON(0): h_active: 1600 h_sync: 1648 h_sync_end 1680 h_blank_end 1760 h_border: 0
    [ 25.542] (II) RADEON(0): v_active: 900 v_sync: 903 v_sync_end 908 v_blanking: 926 v_border: 0
    [ 25.542] (II) RADEON(0): Supported detailed timing:
    [ 25.542] (II) RADEON(0): clock: 85.5 MHz Image Size: 442 x 249 mm
    [ 25.542] (II) RADEON(0): h_active: 1360 h_sync: 1424 h_sync_end 1536 h_blank_end 1792 h_border: 0
    [ 25.542] (II) RADEON(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 795 v_border: 0
    [ 25.542] (II) RADEON(0): Ranges: V min: 55 V max: 76 Hz, H min: 30 H max: 82 kHz, PixClock max 155 MHz
    [ 25.542] (II) RADEON(0): Monitor name: NS-20EM50A13
    [ 25.542] (II) RADEON(0): EDID (in hex):
    [ 25.542] (II) RADEON(0): 00ffffffffffff00085920bb01010101
    [ 25.542] (II) RADEON(0): 00160103812c19782a3c25a554559f27
    [ 25.542] (II) RADEON(0): 0d5054bfef808180714f8140950f9500
    [ 25.542] (II) RADEON(0): 81c0010101012f2640a060841a303020
    [ 25.542] (II) RADEON(0): 3500baf91000001a662150b051001b30
    [ 25.542] (II) RADEON(0): 40703600baf91000001e000000fd0037
    [ 25.542] (II) RADEON(0): 4c1e520f000a202020202020000000fc
    [ 25.542] (II) RADEON(0): 004e532d3230454d35304131330a00a6
    [ 25.542] (II) RADEON(0): Printing probed modes for output HDMI-0
    [ 25.542] (II) RADEON(0): Modeline "1600x900"x60.0 97.75 1600 1648 1680 1760 900 903 908 926 +hsync -vsync (55.5 kHz eP)
    [ 25.542] (II) RADEON(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
    [ 25.542] (II) RADEON(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
    [ 25.542] (II) RADEON(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
    [ 25.542] (II) RADEON(0): Modeline "1440x900"x59.9 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
    [ 25.542] (II) RADEON(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
    [ 25.542] (II) RADEON(0): Modeline "1360x768"x60.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz e)
    [ 25.542] (II) RADEON(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
    [ 25.542] (II) RADEON(0): Modeline "1280x720"x60.0 74.44 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.7 kHz)
    [ 25.542] (II) RADEON(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
    [ 25.542] (II) RADEON(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
    [ 25.542] (II) RADEON(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 25.542] (II) RADEON(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
    [ 25.542] (II) RADEON(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
    [ 25.542] (II) RADEON(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
    [ 25.542] (II) RADEON(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 25.542] (II) RADEON(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
    [ 25.542] (II) RADEON(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
    [ 25.542] (II) RADEON(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
    [ 25.542] (II) RADEON(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
    [ 25.542] (II) RADEON(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 25.542] (II) RADEON(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
    [ 25.542] (II) RADEON(0): Output VGA-0 disconnected
    [ 25.542] (II) RADEON(0): Output HDMI-0 connected
    [ 25.542] (II) RADEON(0): Using exact sizes for initial modes
    [ 25.542] (II) RADEON(0): Output HDMI-0 using initial mode 1600x900
    [ 25.542] (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [ 25.542] (II) RADEON(0): mem size init: gart size :1fdff000 vram size: s:10000000 visible:fa3b000
    [ 25.542] (II) RADEON(0): EXA: Driver will allow EXA pixmaps in VRAM
    [ 25.542] (==) RADEON(0): DPI set to (96, 96)
    [ 25.542] (II) Loading sub module "fb"
    [ 25.542] (II) LoadModule: "fb"
    [ 25.542] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 25.769] (II) Module fb: vendor="X.Org Foundation"
    [ 25.769] compiled for 1.17.1, module version = 1.0.0
    [ 25.769] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 25.769] (II) Loading sub module "ramdac"
    [ 25.769] (II) LoadModule: "ramdac"
    [ 25.769] (II) Module "ramdac" already built-in
    [ 25.769] (II) UnloadModule: "modesetting"
    [ 25.769] (II) Unloading modesetting
    [ 25.769] (II) UnloadModule: "fbdev"
    [ 25.769] (II) Unloading fbdev
    [ 25.769] (II) UnloadSubModule: "fbdevhw"
    [ 25.769] (II) Unloading fbdevhw
    [ 25.769] (II) UnloadModule: "vesa"
    [ 25.769] (II) Unloading vesa
    [ 25.769] (--) Depth 24 pixmap format is 32 bpp
    [ 25.818] (II) RADEON(0): [DRI2] Setup complete
    [ 25.818] (II) RADEON(0): [DRI2] DRI driver: r600
    [ 25.818] (II) RADEON(0): [DRI2] VDPAU driver: r600
    [ 25.818] (II) RADEON(0): Front buffer size: 5652K
    [ 25.818] (II) RADEON(0): VRAM usage limit set to 225496K
    [ 25.853] (==) RADEON(0): Backing store enabled
    [ 25.853] (II) RADEON(0): Direct rendering enabled
    [ 25.853] (II) EXA(0): Driver allocated offscreen pixmaps
    [ 25.853] (II) EXA(0): Driver registered support for the following operations:
    [ 25.853] (II) Solid
    [ 25.853] (II) Copy
    [ 25.853] (II) Composite (RENDER acceleration)
    [ 25.853] (II) UploadToScreen
    [ 25.853] (II) DownloadFromScreen
    [ 25.853] (II) RADEON(0): Acceleration enabled
    [ 25.853] (==) RADEON(0): DPMS enabled
    [ 25.853] (==) RADEON(0): Silken mouse enabled
    [ 25.920] (II) RADEON(0): Set up textured video
    [ 25.920] (II) RADEON(0): [XvMC] Associated with Radeon Textured Video.
    [ 25.920] (II) RADEON(0): [XvMC] Extension initialized.
    [ 25.920] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 26.100] (WW) RADEON(0): Option "PasswordFile" is not used
    [ 26.100] (--) RandR disabled
    [ 32.355] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    [ 32.355] (II) AIGLX: enabled GLX_ARB_create_context
    [ 32.355] (II) AIGLX: enabled GLX_ARB_create_context_profile
    [ 32.355] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
    [ 32.355] (II) AIGLX: enabled GLX_INTEL_swap_event
    [ 32.355] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    [ 32.355] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
    [ 32.355] (II) AIGLX: enabled GLX_ARB_fbconfig_float
    [ 32.355] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
    [ 32.357] (II) AIGLX: Loaded and initialized r600
    [ 32.357] (II) GLX: Initialized DRI2 GL provider for screen 0
    [ 32.358] (II) RADEON(0): Setting screen physical size to 423 x 238
    [ 35.161] (II) config/udev: Adding input device Power Button (/dev/input/event1)
    [ 35.161] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 35.161] (**) Power Button: Applying InputClass "keyboard-layout"
    [ 35.161] (II) LoadModule: "evdev"
    [ 35.206] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 35.498] (II) Module evdev: vendor="X.Org Foundation"
    [ 35.498] compiled for 1.16.2, module version = 2.9.1
    [ 35.499] Module class: X.Org XInput Driver
    [ 35.499] ABI class: X.Org XInput driver, version 21.0
    [ 35.499] (II) Using input driver 'evdev' for 'Power Button'
    [ 35.499] (**) Power Button: always reports core events
    [ 35.499] (**) evdev: Power Button: Device: "/dev/input/event1"
    [ 35.499] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 35.499] (--) evdev: Power Button: Found keys
    [ 35.499] (II) evdev: Power Button: Configuring as keyboard
    [ 35.499] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event1"
    [ 35.499] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [ 35.499] (**) Option "xkb_rules" "evdev"
    [ 35.499] (**) Option "xkb_model" "pc104"
    [ 35.499] (**) Option "xkb_layout" "us, gb, ru, ca, fr"
    [ 35.975] (II) config/udev: Adding input device Power Button (/dev/input/event0)
    [ 35.975] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 35.975] (**) Power Button: Applying InputClass "keyboard-layout"
    [ 35.975] (II) Using input driver 'evdev' for 'Power Button'
    [ 35.975] (**) Power Button: always reports core events
    [ 35.975] (**) evdev: Power Button: Device: "/dev/input/event0"
    [ 35.975] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 35.975] (--) evdev: Power Button: Found keys
    [ 35.975] (II) evdev: Power Button: Configuring as keyboard
    [ 35.975] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event0"
    [ 35.975] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
    [ 35.975] (**) Option "xkb_rules" "evdev"
    [ 35.975] (**) Option "xkb_model" "pc104"
    [ 35.976] (**) Option "xkb_layout" "us, gb, ru, ca, fr"
    [ 35.977] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:1028 (/dev/input/event9)
    [ 35.977] (**) Logitech Unifying Device. Wireless PID:1028: Applying InputClass "evdev pointer catchall"
    [ 35.977] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:1028'
    [ 35.978] (**) Logitech Unifying Device. Wireless PID:1028: always reports core events
    [ 35.978] (**) evdev: Logitech Unifying Device. Wireless PID:1028: Device: "/dev/input/event9"
    [ 35.978] (--) evdev: Logitech Unifying Device. Wireless PID:1028: Vendor 0x46d Product 0xc52b
    [ 35.978] (--) evdev: Logitech Unifying Device. Wireless PID:1028: Found 20 mouse buttons
    [ 35.978] (--) evdev: Logitech Unifying Device. Wireless PID:1028: Found scroll wheel(s)
    [ 35.978] (--) evdev: Logitech Unifying Device. Wireless PID:1028: Found relative axes
    [ 35.978] (--) evdev: Logitech Unifying Device. Wireless PID:1028: Found x and y relative axes
    [ 35.978] (II) evdev: Logitech Unifying Device. Wireless PID:1028: Configuring as mouse
    [ 35.978] (II) evdev: Logitech Unifying Device. Wireless PID:1028: Adding scrollwheel support
    [ 35.978] (**) evdev: Logitech Unifying Device. Wireless PID:1028: YAxisMapping: buttons 4 and 5
    [ 35.978] (**) evdev: Logitech Unifying Device. Wireless PID:1028: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 35.978] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.2/0003:046D:C52B.0003/0003:046D:C52B.0006/input/input12/event9"
    [ 35.978] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:1028" (type: MOUSE, id 8)
    [ 35.978] (II) evdev: Logitech Unifying Device. Wireless PID:1028: initialized for relative axes.
    [ 35.978] (**) Logitech Unifying Device. Wireless PID:1028: (accel) keeping acceleration scheme 1
    [ 35.978] (**) Logitech Unifying Device. Wireless PID:1028: (accel) acceleration profile 0
    [ 35.978] (**) Logitech Unifying Device. Wireless PID:1028: (accel) acceleration factor: 2.000
    [ 35.979] (**) Logitech Unifying Device. Wireless PID:1028: (accel) acceleration threshold: 4
    [ 35.979] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:1028 (/dev/input/mouse1)
    [ 35.979] (II) No input driver specified, ignoring this device.
    [ 35.979] (II) This device may have been added with another device file.
    [ 35.980] (II) config/udev: Adding input device Generic USB Keyboard (/dev/input/event7)
    [ 35.980] (**) Generic USB Keyboard: Applying InputClass "evdev keyboard catchall"
    [ 35.980] (**) Generic USB Keyboard: Applying InputClass "keyboard-layout"
    [ 35.980] (II) Using input driver 'evdev' for 'Generic USB Keyboard'
    [ 35.980] (**) Generic USB Keyboard: always reports core events
    [ 35.980] (**) evdev: Generic USB Keyboard: Device: "/dev/input/event7"
    [ 35.980] (--) evdev: Generic USB Keyboard: Vendor 0x40b Product 0x2000
    [ 35.980] (--) evdev: Generic USB Keyboard: Found keys
    [ 35.980] (II) evdev: Generic USB Keyboard: Configuring as keyboard
    [ 35.980] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.0/0003:040B:2000.0004/input/input10/event7"
    [ 35.980] (II) XINPUT: Adding extended input device "Generic USB Keyboard" (type: KEYBOARD, id 9)
    [ 35.980] (**) Option "xkb_rules" "evdev"
    [ 35.980] (**) Option "xkb_model" "pc104"
    [ 35.980] (**) Option "xkb_layout" "us, gb, ru, ca, fr"
    [ 35.981] (II) config/udev: Adding input device Generic USB Keyboard (/dev/input/event8)
    [ 35.981] (**) Generic USB Keyboard: Applying InputClass "evdev keyboard catchall"
    [ 35.981] (**) Generic USB Keyboard: Applying InputClass "keyboard-layout"
    [ 35.981] (II) Using input driver 'evdev' for 'Generic USB Keyboard'
    [ 35.981] (**) Generic USB Keyboard: always reports core events
    [ 35.981] (**) evdev: Generic USB Keyboard: Device: "/dev/input/event8"
    [ 35.981] (--) evdev: Generic USB Keyboard: Vendor 0x40b Product 0x2000
    [ 35.981] (--) evdev: Generic USB Keyboard: Found scroll wheel(s)
    [ 35.981] (II) evdev: Generic USB Keyboard: Forcing buttons for scroll wheel(s)
    [ 35.981] (--) evdev: Generic USB Keyboard: Found relative axes
    [ 35.981] (--) evdev: Generic USB Keyboard: Found x and y relative axes
    [ 35.981] (--) evdev: Generic USB Keyboard: Found keys
    [ 35.981] (II) evdev: Generic USB Keyboard: Configuring as mouse
    [ 35.981] (II) evdev: Generic USB Keyboard: Configuring as keyboard
    [ 35.981] (II) evdev: Generic USB Keyboard: Adding scrollwheel support
    [ 35.981] (**) evdev: Generic USB Keyboard: YAxisMapping: buttons 4 and 5
    [ 35.981] (**) evdev: Generic USB Keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 35.981] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.1/0003:040B:2000.0005/input/input11/event8"
    [ 35.981] (II) XINPUT: Adding extended input device "Generic USB Keyboard" (type: KEYBOARD, id 10)
    [ 35.981] (**) Option "xkb_rules" "evdev"
    [ 35.981] (**) Option "xkb_model" "pc104"
    [ 35.981] (**) Option "xkb_layout" "us, gb, ru, ca, fr"
    [ 35.981] (II) evdev: Generic USB Keyboard: initialized for relative axes.
    [ 35.981] (**) Generic USB Keyboard: (accel) keeping acceleration scheme 1
    [ 35.982] (**) Generic USB Keyboard: (accel) acceleration profile 0
    [ 35.982] (**) Generic USB Keyboard: (accel) acceleration factor: 2.000
    [ 35.982] (**) Generic USB Keyboard: (accel) acceleration threshold: 4
    [ 35.982] (II) config/udev: Adding input device Generic USB Keyboard (/dev/input/mouse0)
    [ 35.982] (**) Generic USB Keyboard: Applying InputClass "keyboard-layout"
    [ 35.982] (II) Using input driver 'evdev' for 'Generic USB Keyboard'
    [ 35.982] (**) Generic USB Keyboard: always reports core events
    [ 35.982] (**) evdev: Generic USB Keyboard: Device: "/dev/input/mouse0"
    [ 35.982] (EE) evdev: Generic USB Keyboard: Unable to query fd: Inappropriate ioctl for device
    [ 36.060] (EE) PreInit returned 2 for "Generic USB Keyboard"
    [ 36.060] (II) UnloadModule: "evdev"
    [ 36.060] (II) config/udev: Adding input device HP Webcam HD-2200 (/dev/input/event10)
    [ 36.060] (**) HP Webcam HD-2200: Applying InputClass "evdev keyboard catchall"
    [ 36.060] (**) HP Webcam HD-2200: Applying InputClass "keyboard-layout"
    [ 36.060] (II) Using input driver 'evdev' for 'HP Webcam HD-2200'
    [ 36.060] (**) HP Webcam HD-2200: always reports core events
    [ 36.061] (**) evdev: HP Webcam HD-2200: Device: "/dev/input/event10"
    [ 36.061] (--) evdev: HP Webcam HD-2200: Vendor 0x3f0 Product 0xa707
    [ 36.061] (--) evdev: HP Webcam HD-2200: Found keys
    [ 36.061] (II) evdev: HP Webcam HD-2200: Configuring as keyboard
    [ 36.061] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.2/usb1/1-5/1-5:1.0/input/input13/event10"
    [ 36.061] (II) XINPUT: Adding extended input device "HP Webcam HD-2200" (type: KEYBOARD, id 11)
    [ 36.061] (**) Option "xkb_rules" "evdev"
    [ 36.061] (**) Option "xkb_model" "pc104"
    [ 36.061] (**) Option "xkb_layout" "us, gb, ru, ca, fr"
    [ 36.062] (II) config/udev: Adding input device HDA ATI SB Front Mic (/dev/input/event6)
    [ 36.062] (II) No input driver specified, ignoring this device.
    [ 36.062] (II) This device may have been added with another device file.
    [ 36.063] (II) config/udev: Adding input device HDA ATI SB Rear Mic (/dev/input/event5)
    [ 36.063] (II) No input driver specified, ignoring this device.
    [ 36.063] (II) This device may have been added with another device file.
    [ 36.063] (II) config/udev: Adding input device HDA ATI SB Line (/dev/input/event4)
    [ 36.063] (II) No input driver specified, ignoring this device.
    [ 36.063] (II) This device may have been added with another device file.
    [ 36.064] (II) config/udev: Adding input device HDA ATI SB Line Out (/dev/input/event3)
    [ 36.064] (II) No input driver specified, ignoring this device.
    [ 36.064] (II) This device may have been added with another device file.
    [ 36.064] (II) config/udev: Adding input device HDA ATI SB Front Headphone (/dev/input/event2)
    [ 36.064] (II) No input driver specified, ignoring this device.
    [ 36.064] (II) This device may have been added with another device file.
    [ 53.210] (II) RADEON(0): EDID vendor "BBY", prod id 47904
    [ 53.210] (II) RADEON(0): Using EDID range info for horizontal sync
    [ 53.210] (II) RADEON(0): Using EDID range info for vertical refresh
    [ 53.210] (II) RADEON(0): Printing DDC gathered Modelines:
    [ 53.210] (II) RADEON(0): Modeline "1600x900"x0.0 97.75 1600 1648 1680 1760 900 903 908 926 +hsync -vsync (55.5 kHz eP)
    [ 53.210] (II) RADEON(0): Modeline "1360x768"x0.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz e)
    [ 53.210] (II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 53.210] (II) RADEON(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
    [ 53.210] (II) RADEON(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
    [ 53.210] (II) RADEON(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
    [ 53.210] (II) RADEON(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
    [ 53.210] (II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 53.210] (II) RADEON(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
    [ 53.210] (II) RADEON(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
    [ 53.210] (II) RADEON(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
    [ 53.210] (II) RADEON(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
    [ 53.210] (II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 53.210] (II) RADEON(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
    [ 53.210] (II) RADEON(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
    [ 53.210] (II) RADEON(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
    [ 53.210] (II) RADEON(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
    [ 53.210] (II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
    [ 53.210] (II) RADEON(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
    [ 53.210] (II) RADEON(0): Modeline "1440x900"x0.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
    [ 53.210] (II) RADEON(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
    [ 53.210] (II) RADEON(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz e)
    [ 62.870] (II) AIGLX: Suspending AIGLX clients for VT switch
    Last edited by mavo (2015-03-17 13:08:53)

    alphaniner wrote:The preferred way to test a 'default session' is with a clean non-root user. Logging in as root can hide other issues.
    Ok i get that. Here is xorg log and journalctl -b log. I rebooted tried to login through lxdm and got the cursor and blank screen. I then tty3 and startx and launched into openbox to post these results. Still cannot get into xfce as normal user. Thoughts???
    ~.local/share/xorg/Xorg.1.log
    [ 84.848]
    X.Org X Server 1.17.1
    Release Date: 2015-02-10
    [ 84.848] X Protocol Version 11, Revision 0
    [ 84.848] Build Operating System: Linux 3.18.6-1-ARCH x86_64
    [ 84.848] Current Operating System: Linux arch-server 3.14.35-1-lts #1 SMP Sat Mar 7 19:24:12 CET 2015 x86_64
    [ 84.848] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux-lts root=UUID=d6352b14-5ca7-476a-9f43-2bc25278effd rw quiet
    [ 84.848] Build Date: 14 March 2015 06:45:50PM
    [ 84.849]
    [ 84.849] Current version of pixman: 0.32.6
    [ 84.849] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 84.849] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 84.850] (==) Log file: "/home/molmedo1/.local/share/xorg/Xorg.1.log", Time: Wed Mar 18 10:06:18 2015
    [ 84.850] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 84.850] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
    [ 84.851] (==) No Layout section. Using the first Screen section.
    [ 84.851] (**) |-->Screen "Default Screen" (0)
    [ 84.851] (**) | |-->Monitor "<default monitor>"
    [ 84.851] (==) No monitor specified for screen "Default Screen".
    Using a default monitor configuration.
    [ 84.851] (==) Automatically adding devices
    [ 84.851] (==) Automatically enabling devices
    [ 84.851] (==) Automatically adding GPU devices
    [ 84.851] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/OTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/
    [ 84.851] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 84.851] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 84.851] (II) Loader magic: 0x815d80
    [ 84.851] (II) Module ABI versions:
    [ 84.851] X.Org ANSI C Emulation: 0.4
    [ 84.851] X.Org Video Driver: 19.0
    [ 84.851] X.Org XInput driver : 21.0
    [ 84.851] X.Org Server Extension : 9.0
    [ 84.856] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c2
    [ 84.856] (II) xfree86: Adding drm device (/dev/dri/card0)
    [ 84.857] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 8 paused 0
    [ 84.859] (--) PCI:*(0:1:5:0) 1002:9616:1462:7641 rev 0, Mem @ 0xd0000000/268435456, 0xfebe0000/65536, 0xfea00000/1048576, I/O @ 0x0000d000/256
    [ 84.859] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 84.859] (II) "glx" will be loaded by default.
    [ 84.859] (II) LoadModule: "vnc"
    [ 84.860] (II) Loading /usr/lib/xorg/modules/extensions/libvnc.so
    [ 84.868] (II) Module vnc: vendor="Constantin Kaplinsky"
    [ 84.868] compiled for 1.17.1, module version = 1.0.0
    [ 84.868] Module class: X.Org Server Extension
    [ 84.868] ABI class: X.Org Server Extension, version 9.0
    [ 84.868] (II) LoadModule: "glx"
    [ 84.868] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 84.870] (II) Module glx: vendor="X.Org Foundation"
    [ 84.870] compiled for 1.17.1, module version = 1.0.0
    [ 84.870] ABI class: X.Org Server Extension, version 9.0
    [ 84.870] (==) AIGLX enabled
    [ 84.870] (==) Matched ati as autoconfigured driver 0
    [ 84.870] (==) Matched ati as autoconfigured driver 1
    [ 84.870] (==) Matched modesetting as autoconfigured driver 2
    [ 84.870] (==) Matched fbdev as autoconfigured driver 3
    [ 84.870] (==) Matched vesa as autoconfigured driver 4
    [ 84.870] (==) Assigned the driver to the xf86ConfigLayout
    [ 84.870] (II) LoadModule: "ati"
    [ 84.871] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
    [ 84.871] (II) Module ati: vendor="X.Org Foundation"
    [ 84.871] compiled for 1.17.0, module version = 7.5.0
    [ 84.871] Module class: X.Org Video Driver
    [ 84.871] ABI class: X.Org Video Driver, version 19.0
    [ 84.871] (II) LoadModule: "radeon"
    [ 84.871] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
    [ 84.871] (II) Module radeon: vendor="X.Org Foundation"
    [ 84.871] compiled for 1.17.0, module version = 7.5.0
    [ 84.871] Module class: X.Org Video Driver
    [ 84.871] ABI class: X.Org Video Driver, version 19.0
    [ 84.871] (II) LoadModule: "modesetting"
    [ 84.871] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
    [ 84.871] (II) Module modesetting: vendor="X.Org Foundation"
    [ 84.871] compiled for 1.17.1, module version = 1.17.1
    [ 84.871] Module class: X.Org Video Driver
    [ 84.871] ABI class: X.Org Video Driver, version 19.0
    [ 84.871] (II) LoadModule: "fbdev"
    [ 84.871] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
    [ 84.871] (II) Module fbdev: vendor="X.Org Foundation"
    [ 84.871] compiled for 1.17.0, module version = 0.4.4
    [ 84.871] Module class: X.Org Video Driver
    [ 84.871] ABI class: X.Org Video Driver, version 19.0
    [ 84.871] (II) LoadModule: "vesa"
    [ 84.871] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
    [ 84.871] (II) Module vesa: vendor="X.Org Foundation"
    [ 84.871] compiled for 1.17.0, module version = 2.3.2
    [ 84.871] Module class: X.Org Video Driver
    [ 84.871] ABI class: X.Org Video Driver, version 19.0
    [ 84.871] (II) RADEON: Driver for ATI Radeon chipsets:
    ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
    ATI Radeon Mobility X300 (M24) 3152 (PCIE),
    ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
    ATI Radeon X600 (RV380) 3E50 (PCIE),
    ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
    ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
    ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
    ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
    ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
    ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
    ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
    ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
    ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
    ATI Radeon 8500 AIW BB (AGP), ATI Radeon IGP320M (U1) 4336,
    ATI Radeon IGP330M/340M/350M (U2) 4337,
    ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
    ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
    ATI Radeon X800PRO (R420) JI (AGP),
    ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
    ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
    ATI Radeon Mobility 9800 (M18) JN (AGP),
    ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
    ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
    ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
    ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
    ATI Radeon Mobility M7 LW (AGP),
    ATI Mobility FireGL 7800 M7 LX (AGP),
    ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
    ATI FireGL Mobility 9000 (M9) Ld (AGP),
    ATI Radeon Mobility 9000 (M9) Lf (AGP),
    ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI FireMV 2400 PCI,
    ATI Radeon 9700 Pro ND (AGP), ATI Radeon 9700/9500Pro NE (AGP),
    ATI Radeon 9600TX NF (AGP), ATI FireGL X1 NG (AGP),
    ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP),
    ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP),
    ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
    ATI Radeon Mobility 9600 (M10) NQ (AGP),
    ATI Radeon Mobility 9600 (M11) NR (AGP),
    ATI Radeon Mobility 9600 (M10) NS (AGP),
    ATI FireGL Mobility T2 (M10) NT (AGP),
    ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
    ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
    ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
    ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
    ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
    ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
    ATI Radeon Mobility X300 (M22) 5460 (PCIE),
    ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
    ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
    ATI Radeon X800PRO (R423) UI (PCIE),
    ATI Radeon X800LE (R423) UJ (PCIE),
    ATI Radeon X800SE (R423) UK (PCIE),
    ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
    ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
    ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
    ATI FireGL unknown (R423) UR (PCIE),
    ATI FireGL unknown (R423) UT (PCIE),
    ATI Mobility FireGL V5000 (M26) (PCIE),
    ATI Mobility FireGL V5000 (M26) (PCIE),
    ATI Mobility Radeon X700 XL (M26) (PCIE),
    ATI Mobility Radeon X700 (M26) (PCIE),
    ATI Mobility Radeon X700 (M26) (PCIE),
    ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
    ATI Radeon Mobility 9100 IGP (U3) 5835,
    ATI Radeon XPRESS 200 5954 (PCIE),
    ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
    ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
    ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
    ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
    ATI Radeon XPRESS 200M 5975 (PCIE),
    ATI Radeon XPRESS 200 5A41 (PCIE),
    ATI Radeon XPRESS 200M 5A42 (PCIE),
    ATI Radeon XPRESS 200 5A61 (PCIE),
    ATI Radeon XPRESS 200M 5A62 (PCIE),
    ATI Radeon X300 (RV370) 5B60 (PCIE),
    ATI Radeon X600 (RV370) 5B62 (PCIE),
    ATI Radeon X550 (RV370) 5B63 (PCIE),
    ATI FireGL V3100 (RV370) 5B64 (PCIE),
    ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
    ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
    ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
    ATI Mobility Radeon X800 XT (M28) (PCIE),
    ATI Mobility FireGL V5100 (M28) (PCIE),
    ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
    ATI Radeon X850 XT PE (R480) (PCIE),
    ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
    ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
    ATI Radeon X850 XT (R480) (PCIE),
    ATI Radeon X800XT (R423) 5D57 (PCIE),
    ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
    ATI Radeon X700 PRO (RV410) (PCIE),
    ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
    ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
    ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
    ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
    ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
    ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
    ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
    ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
    ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
    ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
    ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
    ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
    ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
    ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
    ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
    ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
    ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
    ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
    ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
    ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
    ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
    ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
    ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
    ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
    ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
    ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
    ATI Mobility Radeon X1700, ATI Radeon X2300HD,
    ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
    ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
    ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
    ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
    ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
    ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
    ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
    ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
    ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
    ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
    ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
    ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
    ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
    ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
    ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
    ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
    AMD FireStream 9250, ATI FirePro V8700 (FireGL),
    ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
    ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
    ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
    ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),
    ATI Mobility Radeon HD 4670, ATI FirePro M5750,
    ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),
    ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
    ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
    ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
    ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
    ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
    ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
    ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
    ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
    ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
    ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
    ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
    ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
    ATI Mobility Radeon HD 3850 X2, ATI RV670,
    ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
    ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
    ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
    ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,
    ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
    ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,
    ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
    ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
    ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
    ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
    ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
    ATI FireGL V3600, ATI Radeon HD 2600 LE,
    ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
    ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
    ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
    ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
    ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
    ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
    ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
    ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
    ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
    ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
    ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
    ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
    ATI Radeon 3000 Graphics, SUMO, SUMO, SUMO2, SUMO2, SUMO2, SUMO2,
    SUMO, SUMO, SUMO2, SUMO, SUMO, SUMO, SUMO, SUMO, ATI Radeon HD 4200,
    ATI Radeon 4100, ATI Mobility Radeon HD 4200,
    ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,
    AMD Radeon HD 6310 Graphics, AMD Radeon HD 6310 Graphics,
    AMD Radeon HD 6250 Graphics, AMD Radeon HD 6250 Graphics,
    AMD Radeon HD 6300 Series Graphics,
    AMD Radeon HD 6200 Series Graphics, PALM, PALM, PALM, CYPRESS,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
    AMD Firestream 9350, ATI Radeon HD 5800 Series,
    ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
    ATI Radeon HD 5800 Series, ATI Radeon HD 5900 Series,
    ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
    ATI Mobility Radeon HD 5800 Series,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
    ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
    ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
    ATI Mobility Radeon HD 5000 Series,
    ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
    ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
    ATI Mobility Radeon HD 5000 Series,
    ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon Graphics,
    ATI Mobility Radeon Graphics, CEDAR,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter, ATI FirePro 2270, CEDAR,
    ATI Radeon HD 5450, CEDAR, CEDAR, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
    CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
    AMD Radeon HD 6900 Series, AMD Radeon HD 6900 Series, CAYMAN, CAYMAN,
    CAYMAN, AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series,
    BARTS, BARTS, Mobility Radeon HD 6000 Series,
    Mobility Radeon HD 6000 Series, BARTS, BARTS, BARTS, BARTS,
    AMD Radeon HD 6800 Series, AMD Radeon HD 6800 Series,
    AMD Radeon HD 6700 Series, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
    TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
    TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
    CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS,
    CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, ARUBA, ARUBA,
    ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
    ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
    ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
    ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, TAHITI, TAHITI, TAHITI, TAHITI,
    TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI,
    TAHITI, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,
    PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,
    VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE,
    VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE,
    VERDE, VERDE, VERDE, VERDE, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND,
    OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND,
    HAINAN, HAINAN, HAINAN, HAINAN, HAINAN, HAINAN, BONAIRE, BONAIRE,
    BONAIRE, BONAIRE, BONAIRE, BONAIRE, BONAIRE, BONAIRE, BONAIRE,
    BONAIRE, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI,
    KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI,
    KABINI, MULLINS, MULLINS, MULLINS, MULLINS, MULLINS, MULLINS,
    MULLINS, MULLINS, MULLINS, MULLINS, MULLINS, MULLINS, MULLINS,
    MULLINS, MULLINS, MULLINS, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI,
    KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI,
    KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI,
    KAVERI, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII,
    HAWAII, HAWAII, HAWAII, HAWAII, HAWAII
    [ 84.876] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
    [ 84.876] (II) FBDEV: driver for framebuffer: fbdev
    [ 84.876] (II) VESA: driver for VESA chipsets: vesa
    [ 84.876] (++) using VT number 3
    [ 84.876] (--) controlling tty is VT number 3, auto-enabling KeepTty
    [ 84.876] xf86EnableIOPorts: failed to set IOPL for I/O (Operation not permitted)
    [ 84.876] (II) [KMS] Kernel modesetting enabled.
    [ 84.876] (WW) Falling back to old probe method for modesetting
    [ 84.876] (WW) Falling back to old probe method for fbdev
    [ 84.876] (II) Loading sub module "fbdevhw"
    [ 84.876] (II) LoadModule: "fbdevhw"
    [ 84.876] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
    [ 84.876] (II) Module fbdevhw: vendor="X.Org Foundation"
    [ 84.876] compiled for 1.17.1, module version = 0.0.2
    [ 84.876] ABI class: X.Org Video Driver, version 19.0
    [ 84.876] (WW) Falling back to old probe method for vesa
    [ 84.876] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
    [ 84.876] (II) RADEON(0): Creating default Display subsection in Screen section
    "Default Screen" for depth/fbbpp 24/32
    [ 84.876] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
    [ 84.876] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
    [ 84.876] (==) RADEON(0): Default visual is TrueColor
    [ 84.876] (==) RADEON(0): RGB weight 888
    [ 84.876] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
    [ 84.876] (--) RADEON(0): Chipset: "ATI Radeon 3000 Graphics" (ChipID = 0x9616)
    [ 84.876] (II) Loading sub module "dri2"
    [ 84.876] (II) LoadModule: "dri2"
    [ 84.876] (II) Module "dri2" already built-in
    [ 84.876] (II) Loading sub module "exa"
    [ 84.876] (II) LoadModule: "exa"
    [ 84.877] (II) Loading /usr/lib/xorg/modules/libexa.so
    [ 84.877] (II) Module exa: vendor="X.Org Foundation"
    [ 84.877] compiled for 1.17.1, module version = 2.6.0
    [ 84.877] ABI class: X.Org Video Driver, version 19.0
    [ 84.877] (II) RADEON(0): KMS Color Tiling: enabled
    [ 84.877] (II) RADEON(0): KMS Color Tiling 2D: enabled
    [ 84.877] (II) RADEON(0): KMS Pageflipping: enabled
    [ 84.877] (II) RADEON(0): SwapBuffers wait for vsync: enabled
    [ 84.920] (II) RADEON(0): Output VGA-0 has no monitor section
    [ 84.951] (II) RADEON(0): Output HDMI-0 has no monitor section
    [ 84.990] (II) RADEON(0): EDID for output VGA-0
    [ 85.021] (II) RADEON(0): EDID for output HDMI-0
    [ 85.021] (II) RADEON(0): Manufacturer: BBY Model: bb20 Serial#: 16843009
    [ 85.021] (II) RADEON(0): Year: 2012 Week: 0
    [ 85.021] (II) RADEON(0): EDID Version: 1.3
    [ 85.021] (II) RADEON(0): Digital Display Input
    [ 85.021] (II) RADEON(0): DFP 1.x compatible TMDS
    [ 85.021] (II) RADEON(0): Max Image Size [cm]: horiz.: 44 vert.: 25
    [ 85.021] (II) RADEON(0): Gamma: 2.20
    [ 85.021] (II) RADEON(0): DPMS capabilities: Off
    [ 85.021] (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    [ 85.021] (II) RADEON(0): First detailed timing is preferred mode
    [ 85.021] (II) RADEON(0): redX: 0.645 redY: 0.331 greenX: 0.335 greenY: 0.621
    [ 85.021] (II) RADEON(0): blueX: 0.152 blueY: 0.053 whiteX: 0.313 whiteY: 0.329
    [ 85.021] (II) RADEON(0): Supported established timings:
    [ 85.021] (II) RADEON(0): 720x400@70Hz
    [ 85.021] (II) RADEON(0): 640x480@60Hz
    [ 85.021] (II) RADEON(0): 640x480@67Hz
    [ 85.021] (II) RADEON(0): 640x480@72Hz
    [ 85.021] (II) RADEON(0): 640x480@75Hz
    [ 85.021] (II) RADEON(0): 800x600@56Hz
    [ 85.021] (II) RADEON(0): 800x600@60Hz
    [ 85.021] (II) RADEON(0): 800x600@72Hz
    [ 85.021] (II) RADEON(0): 800x600@75Hz
    [ 85.021] (II) RADEON(0): 832x624@75Hz
    [ 85.021] (II) RADEON(0): 1024x768@60Hz
    [ 85.021] (II) RADEON(0): 1024x768@70Hz
    [ 85.021] (II) RADEON(0): 1024x768@75Hz
    [ 85.021] (II) RADEON(0): 1280x1024@75Hz
    [ 85.021] (II) RADEON(0): 1152x864@75Hz
    [ 85.021] (II) RADEON(0): Manufacturer's mask: 0
    [ 85.021] (II) RADEON(0): Supported standard timings:
    [ 85.021] (II) RADEON(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
    [ 85.021] (II) RADEON(0): #1: hsize: 1152 vsize 864 refresh: 75 vid: 20337
    [ 85.021] (II) RADEON(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513
    [ 85.021] (II) RADEON(0): #3: hsize: 1440 vsize 900 refresh: 75 vid: 3989
    [ 85.021] (II) RADEON(0): #4: hsize: 1440 vsize 900 refresh: 60 vid: 149
    [ 85.021] (II) RADEON(0): #5: hsize: 1280 vsize 720 refresh: 60 vid: 49281
    [ 85.021] (II) RADEON(0): Supported detailed timing:
    [ 85.021] (II) RADEON(0): clock: 97.8 MHz Image Size: 442 x 249 mm
    [ 85.021] (II) RADEON(0): h_active: 1600 h_sync: 1648 h_sync_end 1680 h_blank_end 1760 h_border: 0
    [ 85.021] (II) RADEON(0): v_active: 900 v_sync: 903 v_sync_end 908 v_blanking: 926 v_border: 0
    [ 85.021] (II) RADEON(0): Supported detailed timing:
    [ 85.021] (II) RADEON(0): clock: 85.5 MHz Image Size: 442 x 249 mm
    [ 85.021] (II) RADEON(0): h_active: 1360 h_sync: 1424 h_sync_end 1536 h_blank_end 1792 h_border: 0
    [ 85.021] (II) RADEON(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 795 v_border: 0
    [ 85.021] (II) RADEON(0): Ranges: V min: 55 V max: 76 Hz, H min: 30 H max: 82 kHz, PixClock max 155 MHz
    [ 85.021] (II) RADEON(0): Monitor name: NS-20EM50A13
    [ 85.021] (II) RADEON(0): EDID (in hex):
    [ 85.021] (II) RADEON(0): 00ffffffffffff00085920bb01010101
    [ 85.021] (II) RADEON(0): 00160103812c19782a3c25a554559f27
    [ 85.021] (II) RADEON(0): 0d5054bfef808180714f8140950f9500
    [ 85.021] (II) RADEON(0): 81c0010101012f2640a060841a303020
    [ 85.021] (II) RADEON(0): 3500baf91000001a662150b051001b30
    [ 85.021] (II) RADEON(0): 40703600baf91000001e000000fd0037
    [ 85.022] (II) RADEON(0): 4c1e520f000a202020202020000000fc
    [ 85.022] (II) RADEON(0): 004e532d3230454d35304131330a00a6
    [ 85.022] (II) RADEON(0): Printing probed modes for output HDMI-0
    [ 85.022] (II) RADEON(0): Modeline "1600x900"x60.0 97.75 1600 1648 1680 1760 900 903 908 926 +hsync -vsync (55.5 kHz eP)
    [ 85.022] (II) RADEON(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
    [ 85.022] (II) RADEON(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
    [ 85.022] (II) RADEON(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
    [ 85.022] (II) RADEON(0): Modeline "1440x900"x59.9 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
    [ 85.022] (II) RADEON(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
    [ 85.022] (II) RADEON(0): Modeline "1360x768"x60.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz e)
    [ 85.022] (II) RADEON(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
    [ 85.022] (II) RADEON(0): Modeline "1280x720"x60.0 74.44 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.7 kHz)
    [ 85.022] (II) RADEON(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
    [ 85.022] (II) RADEON(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
    [ 85.022] (II) RADEON(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 85.022] (II) RADEON(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
    [ 85.022] (II) RADEON(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
    [ 85.022] (II) RADEON(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
    [ 85.022] (II) RADEON(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 85.022] (II) RADEON(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
    [ 85.022] (II) RADEON(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
    [ 85.022] (II) RADEON(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
    [ 85.022] (II) RADEON(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
    [ 85.022] (II) RADEON(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 85.022] (II) RADEON(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
    [ 85.022] (II) RADEON(0): Output VGA-0 disconnected
    [ 85.022] (II) RADEON(0): Output HDMI-0 connected
    [ 85.022] (II) RADEON(0): Using exact sizes for initial modes
    [ 85.022] (II) RADEON(0): Output HDMI-0 using initial mode 1600x900
    [ 85.022] (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [ 85.022] (II) RADEON(0): mem size init: gart size :1fdff000 vram size: s:10000000 visible:fa3b000
    [ 85.022] (II) RADEON(0): EXA: Driver will allow EXA pixmaps in VRAM
    [ 85.022] (==) RADEON(0): DPI set to (96, 96)
    [ 85.022] (II) Loading sub module "fb"
    [ 85.022] (II) LoadModule: "fb"
    [ 85.022] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 85.022] (II) Module fb: vendor="X.Org Foundation"
    [ 85.022] compiled for 1.17.1, module version = 1.0.0
    [ 85.022] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 85.022] (II) Loading sub module "ramdac"
    [ 85.022] (II) LoadModule: "ramdac"
    [ 85.022] (II) Module "ramdac" already built-in
    [ 85.022] (II) UnloadModule: "modesetting"
    [ 85.022] (II) Unloading modesetting
    [ 85.022] (II) UnloadModule: "fbdev"
    [ 85.022] (II) Unloading fbdev
    [ 85.022] (II) UnloadSubModule: "fbdevhw"
    [ 85.022] (II) Unloading fbdevhw
    [ 85.022] (II) UnloadModule: "vesa"
    [ 85.022] (II) Unloading vesa
    [ 85.022] (--) Depth 24 pixmap format is 32 bpp
    [ 85.023] (II) RADEON(0): [DRI2] Setup complete
    [ 85.023] (II) RADEON(0): [DRI2] DRI driver: r600
    [ 85.023] (II) RADEON(0): [DRI2] VDPAU driver: r600
    [ 85.023] (II) RADEON(0): Front buffer size: 5652K
    [ 85.023] (II) RADEON(0): VRAM usage limit set to 225496K
    [ 85.023] (==) RADEON(0): Backing store enabled
    [ 85.023] (II) RADEON(0): Direct rendering enabled
    [ 85.023] (II) EXA(0): Driver allocated offscreen pixmaps
    [ 85.023] (II) EXA(0): Driver registered support for the following operations:
    [ 85.023] (II) Solid
    [ 85.023] (II) Copy
    [ 85.023] (II) Composite (RENDER acceleration)
    [ 85.023] (II) UploadToScreen
    [ 85.023] (II) DownloadFromScreen
    [ 85.023] (II) RADEON(0): Acceleration enabled
    [ 85.023] (==) RADEON(0): DPMS enabled
    [ 85.023] (==) RADEON(0): Silken mouse enabled
    [ 85.023] (II) RADEON(0): Set up textured video
    [ 85.023] (II) RADEON(0): [XvMC] Associated with Radeon Textured Video.
    [ 85.023] (II) RADEON(0): [XvMC] Extension initialized.
    [ 85.023] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 85.023] (WW) RADEON(0): Option "PasswordFile" is not used
    [ 85.023] (--) RandR disabled
    [ 85.047] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    [ 85.047] (II) AIGLX: enabled GLX_ARB_create_context
    [ 85.047] (II) AIGLX: enabled GLX_ARB_create_context_profile
    [ 85.047] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
    [ 85.047] (II) AIGLX: enabled GLX_INTEL_swap_event
    [ 85.047] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    [ 85.047] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
    [ 85.047] (II) AIGLX: enabled GLX_ARB_fbconfig_float
    [ 85.047] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
    [ 85.048] (II) AIGLX: Loaded and initialized r600
    [ 85.048] (II) GLX: Initialized DRI2 GL provider for screen 0
    [ 85.048] (II) RADEON(0): Setting screen physical size to 423 x 238
    [ 85.088] (II) config/udev: Adding input device Power Button (/dev/input/event1)
    [ 85.088] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 85.088] (**) Power Button: Applying InputClass "keyboard-layout"
    [ 85.088] (II) LoadModule: "evdev"
    [ 85.088] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 85.089] (II) Module evdev: vendor="X.Org Foundation"
    [ 85.089] compiled for 1.16.2, module version = 2.9.1
    [ 85.089] Module class: X.Org XInput Driver
    [ 85.089] ABI class: X.Org XInput driver, version 21.0
    [ 85.089] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 13 paused 0
    [ 85.090] (II) Using input driver 'evdev' for 'Power Button'
    [ 85.090] (**) Power Button: always reports core events
    [ 85.090] (**) evdev: Power Button: Device: "/dev/input/event1"
    [ 85.090] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 85.090] (--) evdev: Power Button: Found keys
    [ 85.090] (II) evdev: Power Button: Configuring as keyboard
    [ 85.090] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event1"
    [ 85.090] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [ 85.090] (**) Option "xkb_rules" "evdev"
    [ 85.090] (**) Option "xkb_model" "pc104"
    [ 85.090] (**) Option "xkb_layout" "us, gb, ru, ca, fr"
    [ 85.123] (II) config/udev: Adding input device Power Button (/dev/input/event0)
    [ 85.123] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 85.123] (**) Power Button: Applying InputClass "keyboard-layout"
    [ 85.124] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 14 paused 0
    [ 85.124] (II) Using input driver 'evdev' for 'Power Button'
    [ 85.124] (**) Power Button: always reports core events
    [ 85.124] (**) evdev: Power Button: Device: "/dev/input/event0"
    [ 85.124] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 85.124] (--) evdev: Power Button: Found keys
    [ 85.124] (II) evdev: Power Button: Configuring as keyboard
    [ 85.124] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event0"
    [ 85.124] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
    [ 85.124] (**) Option "xkb_rules" "evdev"
    [ 85.124] (**) Option "xkb_model" "pc104"
    [ 85.124] (**) Option "xkb_layout" "us, gb, ru, ca, fr"
    [ 85.125] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:1028 (/dev/input/event9)
    [ 85.125] (**) Logitech Unifying Device. Wireless PID:1028: Applying InputClass "evdev pointer catchall"
    [ 85.125] (II) systemd-logind: got fd for /dev/input/event9 13:73 fd 15 paused 0
    [ 85.125] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:1028'
    [ 85.125] (**) Logitech Unifying Device. Wireless PID:1028: always reports core events
    [ 85.125] (**) evdev: Logitech Unifying Device. Wireless PID:1028: Device: "/dev/input/event9"
    [ 85.125] (--) evdev: Logitech Unifying Device. Wireless PID:1028: Vendor 0x46d Product 0xc52b
    [ 85.125] (--) evdev: Logitech Unifying Device. Wireless PID:1028: Found 20 mouse buttons
    [ 85.125] (--) evdev: Logitech Unifying Device. Wireless PID:1028: Found scroll wheel(s)
    [ 85.125] (--) evdev: Logitech Unifying Device. Wireless PID:1028: Found relative axes
    [ 85.125] (--) evdev: Logitech Unifying Device. Wireless PID:1028: Found x and y relative axes
    [ 85.125] (II) evdev: Logitech Unifying Device. Wireless PID:1028: Configuring as mouse
    [ 85.125] (II) evdev: Logitech Unifying Device. Wireless PID:1028: Adding scrollwheel support
    [ 85.125] (**) evdev: Logitech Unifying Device. Wireless PID:1028: YAxisMapping: buttons 4 and 5
    [ 85.125] (**) evdev: Logitech Unifying Device. Wireless PID:1028: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 85.125] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb1/1-2/1-2:1.2/0003:046D:C52B.0003/0003:046D:C52B.0006/input/input12/event9"
    [ 85.125] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:1028" (type: MOUSE, id 8)
    [ 85.125] (II) evdev: Logitech Unifying Device. Wireless PID:1028: initialized for relative axes.
    [ 85.125] (**) Logitech Unifying Device. Wireless PID:1028: (accel) keeping acceleration scheme 1
    [ 85.125] (**) Logitech Unifying Device. Wireless PID:1028: (accel) acceleration profile 0
    [ 85.125] (**) Logitech Unifying Device. Wireless PID:1028: (accel) acceleration factor: 2.000
    [ 85.125] (**) Logitech Unifying Device. Wireless PID:1028: (accel) acceleration threshold: 4
    [ 85.126] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:1028 (/dev/input/mouse1)
    [ 85.126] (II) No input driver specified, ignoring this device.
    [ 85.126] (II) This device may have been added with another device file.
    [ 85.126] (II) config/udev: Adding input device Generic USB Keyboard (/dev/input/event7)
    [ 85.126] (**) Generic USB Keyboard: Applying InputClass "evdev keyboard catchall"
    [ 85.126] (**) Generic USB Keyboard: Applying InputClass "keyboard-layout"
    [ 85.126] (II) systemd-logind: got fd for /dev/input/event7 13:71 fd 16 paused 0
    [ 85.126] (II) Using input driver 'evdev' for 'Generic USB Keyboard'
    [ 85.126] (**) Generic USB Keyboard: always reports core events
    [ 85.126] (**) evdev: Generic USB Keyboard: Device: "/dev/input/event7"
    [ 85.126] (--) evdev: Generic USB Keyboard: Vendor 0x40b Product 0x2000
    [ 85.126] (--) evdev: Generic USB Keyboard: Found keys
    [ 85.126] (II) evdev: Generic USB Keyboard: Configuring as keyboard
    [ 85.126] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb1/1-3/1-3:1.0/0003:040B:2000.0004/input/input10/event7"
    [ 85.126] (II) XINPUT: Adding extended input device "Generic USB Keyboard" (type: KEYBOARD, id 9)
    [ 85.126] (**) Option "xkb_rules" "evdev"
    [ 85.126] (**) Option "xkb_model" "pc104"
    [ 85.126] (**) Option "xkb_layout" "us, gb, ru, ca, fr"
    [ 85.127] (II) config/udev: Adding input device Generic USB Keyboard (/dev/input/event8)
    [ 85.127] (**) Generic USB Keyboard: Applying InputClass "evdev keyboard catchall"
    [ 85.127] (**) Generic USB Keyboard: Applying InputClass "keyboard-layout"
    [ 85.127] (II) systemd-logind: got fd for /dev/input/event8 13:72 fd 17 paused 0
    [ 85.127] (II) Using input driver 'evdev' for 'Generic USB Keyboard'
    [ 85.127] (**) Generic USB Keyboard: always reports core events
    [ 85.127] (**) evdev: Generic USB Keyboard: Device: "/dev/input/event8"
    [ 85.127] (--) evdev: Generic USB Keyboard: Vendor 0x40b Product 0x2000
    [ 85.127] (--) evdev: Generic USB Keyboard: Found scroll wheel(s)
    [ 85.127] (II) evdev: Generic USB Keyboard: Forcing buttons for scroll wheel(s)
    [ 85.127] (--) evdev: Generic USB Keyboard: Found relative axes
    [ 85.127] (--) evdev: Generic USB Keyboard: Found x and y relative axes
    [ 85.127] (--) evdev: Generic USB Keyboard: Found keys
    [ 85.127] (II) evdev: Generic USB Keyboard: Configuring as mouse
    [ 85.127] (II) evdev: Generic USB Keyboard: Configuring as keyboard
    [ 85.127] (II) evdev: Generic USB Keyboard: Adding scrollwheel support
    [ 85.127] (**) evdev: Generic USB Keyboard: YAxisMapping: buttons 4 and 5
    [ 85.127] (**) evdev: Generic USB Keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 85.127] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb1/1-3/1-3:1.1/0003:040B:2000.0005/input/input11/event8"
    [ 85.127] (II) XINPUT: Adding extended input device "Generic USB Keyboard" (type: KEYBOARD, id 10)
    [ 85.127] (**) Option "xkb_rules" "evdev"
    [ 85.127] (**) Option "xkb_model" "pc104"
    [ 85.127] (**) Option "xkb_layout" "us, gb, ru, ca, fr"
    [ 85.128] (II) evdev: Generic USB Keyboard: initialized for relative axes.
    [ 85.128] (**) Generic USB Keyboard: (accel) keeping acceleration scheme 1
    [ 85.128] (**) Generic USB Keyboard: (accel) acceleration profile 0
    [ 85.128] (**) Generic USB Keyboard: (accel) acceleration factor: 2.000
    [ 85.128] (**) Generic USB Keyboard: (accel) acceleration threshold: 4
    [ 85.128] (II) config/udev: Adding input device Generic USB Keyboard (/dev/input/mouse0)
    [ 85.128] (**) Generic USB Keyboard: Applying InputClass "keyboard-layout"
    [ 85.128] (II) Using input driver 'evdev' for 'Generic USB Keyboard'
    [ 85.128] (**) Generic USB Keyboard: always reports core events
    [ 85.128] (**) evdev: Generic USB Keyboard: Device: "/dev/input/mouse0"
    [ 85.128] (EE) evdev: Generic USB Keyboard: Unable to query fd: Inappropriate ioctl for device
    [ 85.220] (EE) PreInit returned 2 for "Generic USB Keyboard"
    [ 85.220] (II) UnloadModule: "evdev"
    [ 85.220] (II) config/udev: Adding input device HP Webcam HD-2200 (/dev/input/event10)
    [ 85.220] (**) HP Webcam HD-2200: Applying InputClass "evdev keyboard catchall"
    [ 85.220] (**) HP Webcam HD-2200: Applying InputClass "keyboard-layout"
    [ 85.221] (II) systemd-logind: got fd for /dev/input/event10 13:74 fd 18 paused 0
    [ 85.221] (II) Using input driver 'evdev' for 'HP Webcam HD-2200'
    [ 85.221] (**) HP Webcam HD-2200: always reports core events
    [ 85.221] (**) evdev: HP Webcam HD-2200: Device: "/dev/input/event10"
    [ 85.221] (--) evdev: HP Webcam HD-2200: Vendor 0x3f0 Product 0xa707
    [ 85.221] (--) evdev: HP Webcam HD-2200: Found keys
    [ 85.221] (II) evdev: HP Webcam HD-2200: Configuring as keyboard
    [ 85.221] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.2/usb6/6-5/6-5:1.0/input/input13/event10"
    [ 85.222] (II) XINPUT: Adding extended input device "HP Webcam HD-2200" (type: KEYBOARD, id 11)
    [ 85.222] (**) Option "xkb_rules" "evdev"
    [ 85.222] (**) Option "xkb_model" "pc104"
    [ 85.222] (**) Option "xkb_layout" "us, gb, ru, ca, fr"
    [ 85.223] (II) config/udev: Adding input device HDA ATI SB Front Mic (/dev/input/event6)
    [ 85.223] (II) No input driver specified, ignoring this device.
    [ 85.223] (II) This device may have been added with another device file.
    [ 85.223] (II) config/udev: Adding input device HDA ATI SB Rear Mic (/dev/input/event5)
    [ 85.223] (II) No input driver specified, ignoring this device.
    [ 85.223] (II) This device may have been added with another device file.
    [ 85.224] (II) config/udev: Adding input device HDA ATI SB Line (/dev/input/event4)
    [ 85.224] (II) No input driver specified, ignoring this device.
    [ 85.224] (II) This device may have been added with another device file.
    [ 85.224] (II) config/udev: Adding input device HDA ATI SB Line Out (/dev/input/event3)
    [ 85.225] (II) No input driver specified, ignoring this device.
    [ 85.225] (II) This device may have been added with another device file.
    [ 85.225] (II) config/udev: Adding input device HDA ATI SB Front Headphone (/dev/input/event2)
    [ 85.225] (II) No input driver specified, ignoring this device.
    [ 85.225] (II) This device may have been added with another device file.
    journalctl -b
    Mar 18 10:05:02 arch-server kernel: 00000-9FFFF write-back
    Mar 18 10:05:02 arch-server kernel: A0000-EFFFF uncachable
    Mar 18 10:05:02 arch-server kernel: F0000-FFFFF write-protect
    Mar 18 10:05:02 arch-server kernel: MTRR variable ranges enabled:
    Mar 18 10:05:02 arch-server kernel: 0 base 000000000000 mask FFFF80000000 write-back
    Mar 18 10:05:02 arch-server kernel: 1 base 000080000000 mask FFFFC0000000 write-back
    Mar 18 10:05:02 arch-server kernel: 2 base 0000C0000000 mask FFFFF0000000 write-back
    Mar 18 10:05:02 arch-server kernel: 3 disabled
    Mar 18 10:05:02 arch-server kernel: 4 disabled
    Mar 18 10:05:02 arch-server kernel: 5 disabled
    Mar 18 10:05:02 arch-server kernel: 6 disabled
    Mar 18 10:05:02 arch-server kernel: 7 disabled
    Mar 18 10:05:02 arch-server kernel: TOM2: 0000000430000000 aka 17152M
    Mar 18 10:05:03 arch-server kernel: x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    Mar 18 10:05:03 arch-server kernel: e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
    Mar 18 10:05:03 arch-server kernel: e820: last_pfn = 0xcff90 max_arch_pfn = 0x400000000
    Mar 18 10:05:03 arch-server kernel: found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
    Mar 18 10:05:03 arch-server kernel: Scanning 1 areas for low memory corruption
    Mar 18 10:05:03 arch-server kernel: Base memory trampoline at [ffff880000099000] 99000 size 24576
    Mar 18 10:05:03 arch-server kernel: Using GB pages for direct mapping
    Mar 18 10:05:03 arch-server kernel: init_memory_mapping: [mem 0x00000000-0x000fffff]
    Mar 18 10:05:03 arch-server kernel: [mem 0x00000000-0x000fffff] page 4k
    Mar 18 10:05:03 arch-server kernel: BRK [0x01b3e000, 0x01b3efff] PGTABLE
    Mar 18 10:05:03 arch-server kernel: BRK [0x01b3f000, 0x01b3ffff] PGTABLE
    Mar 18 10:05:03 arch-server kernel: BRK [0x01b40000, 0x01b40fff] PGTABLE
    Mar 18 10:05:03 arch-server kernel: init_memory_mapping: [mem 0x41fe00000-0x41fffffff]
    Mar 18 10:05:03 arch-server kernel: [mem 0x41fe00000-0x41fffffff] page 2M
    Mar 18 10:05:03 arch-server kernel: BRK [0x01b41000, 0x01b41fff] PGTABLE
    Mar 18 10:05:03 arch-server kernel: init_memory_mapping: [mem 0x41c000000-0x41fdfffff]
    Mar 18 10:05:03 arch-server kernel: [mem 0x41c000000-0x41fdfffff] page 2M
    Mar 18 10:05:03 arch-server kernel: init_memory_mapping: [mem 0x400000000-0x41bffffff]
    Mar 18 10:05:03 arch-server kernel: [mem 0x400000000-0x41bffffff] page 2M
    Mar 18 10:05:03 arch-server kernel: init_memory_mapping: [mem 0x00100000-0xcff8ffff]
    Mar 18 10:05:03 arch-server kernel: [mem 0x00100000-0x001fffff] page 4k
    Mar 18 10:05:03 arch-server kernel: [mem 0x00200000-0x3fffffff] page 2M
    Mar 18 10:05:03 arch-server kernel: [mem 0x40000000-0xbfffffff] page 1G
    Mar 18 10:05:03 arch-server kernel: [mem 0xc0000000-0xcfdfffff] page 2M
    Mar 18 10:05:03 arch-server kernel: [mem 0xcfe00000-0xcff8ffff] page 4k
    Mar 18 10:05:03 arch-server kernel: init_memory_mapping: [mem 0x100000000-0x3ffffffff]
    Mar 18 10:05:03 arch-server kernel: [mem 0x100000000-0x3ffffffff] page 1G
    Mar 18 10:05:03 arch-server kernel: RAMDISK: [mem 0x3784e000-0x37c1efff]
    Mar 18 10:05:03 arch-server kernel: ACPI: RSDP 00000000000f8d00 000014 (v00 ACPIAM)
    Mar 18 10:05:03 arch-server kernel: ACPI: RSDT 00000000cff90000 00003C (v01 7641MS A7641100 20130428 MSFT 00000097)
    Mar 18 10:05:03 arch-server kernel: ACPI: FACP 00000000cff90200 000084 (v01 7641MS A7641100 20130428 MSFT 00000097)
    Mar 18 10:05:03 arch-server kernel: ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20131218/
    Mar 18 10:05:03 arch-server kernel: ACPI: DSDT 00000000cff90660 009DF0 (v01 A7641 A7641100 00000100 INTL 20051117)
    Mar 18 10:05:03 arch-server kernel: ACPI: FACS 00000000cff9e000 000040
    Mar 18 10:05:03 arch-server kernel: ACPI: APIC 00000000cff90390 00010C (v01 7641MS A7641100 20130428 MSFT 00000097)
    Mar 18 10:05:03 arch-server kernel: ACPI: MCFG 00000000cff904a0 00003C (v01 7641MS OEMMCFG 20130428 MSFT 00000097)
    Mar 18 10:05:03 arch-server kernel: ACPI: OEMB 00000000cff9e040 000072 (v01 7641MS A7641100 20130428 MSFT 00000097)
    Mar 18 10:05:03 arch-server kernel: ACPI: HPET 00000000cff9a660 000038 (v01 7641MS OEMHPET 20130428 MSFT 00000097)
    Mar 18 10:05:03 arch-server kernel: ACPI: SSDT 00000000cff9a6a0 000D40 (v01 A M I POWERNOW 00000001 AMD 00000001)
    Mar 18 10:05:03 arch-server kernel: ACPI: Local APIC address 0xfee00000
    Mar 18 10:05:03 arch-server kernel: No NUMA configuration found
    Mar 18 10:05:03 arch-server kernel: Faking a node at [mem 0x0000000000000000-0x000000041fffffff]
    Mar 18 10:05:03 arch-server kernel: Initmem setup node 0 [mem 0x00000000-0x41fffffff]
    Mar 18 10:05:03 arch-server kernel: NODE_DATA [mem 0x41fff9000-0x41fffdfff]
    Mar 18 10:05:03 arch-server kernel: [ffffea0000000000-ffffea00107fffff] PMD -> [ffff88040fa00000-ffff88041f5fffff] on node 0
    Mar 18 10:05:03 arch-server kernel: Zone ranges:
    Mar 18 10:05:03 arch-server kernel: DMA [mem 0x00001000-0x00ffffff]
    Mar 18 10:05:03 arch-server kernel: DMA32 [mem 0x01000000-0xffffffff]
    Mar 18 10:05:03 arch-server kernel: Normal [mem 0x100000000-0x41fffffff]
    Mar 18 10:05:03 arch-server kernel: Movable zone start for each node
    Mar 18 10:05:03 arch-server kernel: Early memory node ranges
    Mar 18 10:05:03 arch-server kernel: node 0: [mem 0x00001000-0x0009efff]
    Mar 18 10:05:03 arch-server kernel: node 0: [mem 0x00100000-0xcff8ffff]
    Mar 18 10:05:03 arch-server kernel: node 0: [mem 0x100000000-0x41fffffff]
    Mar 18 10:05:03 arch-server kernel: On node 0 totalpages: 4128558
    Mar 18 10:05:03 arch-server kernel: DMA zone: 64 pages used for memmap
    Mar 18 10:05:03 arch-server kernel: DMA zone: 21 pages reserved
    Mar 18 10:05:03 arch-server kernel: DMA zone: 3998 pages, LIFO batch:0
    Mar 18 10:05:03 arch-server kernel: DMA32 zone: 13247 pages used for memmap
    Mar 18 10:05:03 arch-server kernel: DMA32 zone: 847760 pages, LIFO batch:31
    Mar 18 10:05:03 arch-server kernel: Normal zone: 51200 pages used for memmap
    Mar 18 10:05:03 arch-server kernel: Normal zone: 3276800 pages, LIFO batch:31
    Mar 18 10:05:03 arch-server kernel: ACPI: PM-Timer IO Port: 0x808
    Mar 18 10:05:03 arch-server kernel: ACPI: Local APIC address 0xfee00000
    Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
    Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x11] enabled)
    Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled)
    Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x04] lapic_id[0x13] enabled)
    Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
    Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
    Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x07] lapic_id[0x86] disabled)
    Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x08] lapic_id[0x87] disabled)
    Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] disabled)
    Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled)
    Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled)
    Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled)
    Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled)
    Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled)
    Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled)
    Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled)
    Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x11] lapic_id[0x90] disabled)
    Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x12] lapic_id[0x91] disabled)
    Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x13] lapic_id[0x92] disabled)
    Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x14] lapic_id[0x93] disabled)
    Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x15] lapic_id[0x94] disabled)
    Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x16] lapic_id[0x95] disabled)
    Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x17] lapic_id[0x96] disabled)
    Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x18] lapic_id[0x97] disabled)
    Mar 18 10:05:03 arch-server kernel: ACPI: IOAPIC (id[0x14] address[0xfec00000] gsi_base[0])
    Mar 18 10:05:03 arch-server kernel: IOAPIC[0]: apic_id 20, version 33, address 0xfec00000, GSI 0-23
    Mar 18 10:05:03 arch-server kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    Mar 18 10:05:03 arch-server kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
    Mar 18 10:05:03 arch-server kernel: ACPI: IRQ0 used by override.
    Mar 18 10:05:03 arch-server kernel: ACPI: IRQ2 used by override.
    Mar 18 10:05:03 arch-server kernel: ACPI: IRQ9 used by override.
    Mar 18 10:05:03 arch-server kernel: Using ACPI (MADT) for SMP configuration information
    Mar 18 10:05:03 arch-server kernel: ACPI: HPET id: 0x8300 base: 0xfed00000
    Mar 18 10:05:03 arch-server kernel: smpboot: Allowing 24 CPUs, 20 hotplug CPUs
    Mar 18 10:05:03 arch-server kernel: nr_irqs_gsi: 40
    Mar 18 10:05:03 arch-server kernel: PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
    Mar 18 10:05:03 arch-server kernel: PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff]
    Mar 18 10:05:03 arch-server kernel: PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
    Mar 18 10:05:03 arch-server kernel: PM: Registered nosave memory: [mem 0xcff90000-0xcff9dfff]
    Mar 18 10:05:03 arch-server kernel: PM: Registered nosave memory: [mem 0xcff9e000-0xcffdffff]
    Mar 18 10:05:03 arch-server kernel: PM: Registered nosave memory: [mem 0xcffe0000-0xcfffffff]
    Mar 18 10:05:03 arch-server kernel: PM: Registered nosave memory: [mem 0xd0000000-0xffdfffff]
    Mar 18 10:05:03 arch-server kernel: PM: Registered nosave memory: [mem 0xffe00000-0xffffffff]
    Mar 18 10:05:03 arch-server kernel: e820: [mem 0xd0000000-0xffdfffff] available for PCI devices
    Mar 18 10:05:03 arch-server kernel: Booting paravirtualized kernel on bare hardware
    Mar 18 10:05:03 arch-server kernel: setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:24 nr_node_ids:1
    Mar 18 10:05:03 arch-server kernel: PERCPU: Embedded 27 pages/cpu @ffff88040f600000 s81664 r8192 d20736 u131072
    Mar 18 10:05:03 arch-server kernel: pcpu-alloc: s81664 r8192 d20736 u131072 alloc=1*2097152
    Mar 18 10:05:03 arch-server kernel: pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
    Mar 18 10:05:03 arch-server kernel: pcpu-alloc: [0] 16 17 18 19 20 21 22 23 -- -- -- -- -- -- -- --
    Mar 18 10:05:03 arch-server kernel: Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4064026
    Mar 18 10:05:03 arch-server kernel: Policy zone: Normal
    Mar 18 10:05:03 arch-server kernel: Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux-lts root=UUID=d6352b14-5ca7-476a-9f43-2bc25278effd rw quiet
    Mar 18 10:05:03 arch-server kernel: PID hash table entries: 4096 (order: 3, 32768 bytes)
    Mar 18 10:05:03 arch-server kernel: xsave: enabled xstate_bv 0x7, cntxt size 0x340
    Mar 18 10:05:03 arch-server kernel: Checking aperture...
    Mar 18 10:05:03 arch-server kernel: No AGP bridge found
    Mar 18 10:05:03 arch-server kernel: Node 0: aperture @ 0 size 32 MB
    Mar 18 10:05:03 arch-server kernel: Your BIOS doesn't leave a aperture memory hole
    Mar 18 10:05:03 arch-server kernel: Please enable the IOMMU option in the BIOS setup
    Mar 18 10:05:03 arch-server kernel: This costs you 64 MB of RAM
    Mar 18 10:05:03 arch-server kernel: Mapping aperture over 65536 KB of RAM @ c4000000
    Mar 18 10:05:03 arch-server kernel: PM: Registered nosave memory: [mem 0xc4000000-0xc7ffffff]
    Mar 18 10:05:03 arch-server kernel: Memory: 16106196K/16514232K available (5183K kernel code, 859K rwdata, 1640K rodata, 1128K init, 1300K bss, 408036K reserv
    Mar 18 10:05:03 arch-server kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=24, Nodes=1
    Mar 18 10:05:03 arch-server kernel: Hierarchical RCU implementation.
    Mar 18 10:05:03 arch-server kernel: RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=24.
    Mar 18 10:05:03 arch-server kernel: RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=24
    Mar 18 10:05:03 arch-server kernel: NR_IRQS:8448 nr_irqs:872 16
    Mar 18 10:05:03 arch-server kernel: spurious 8259A interrupt: IRQ7.
    Mar 18 10:05:03 arch-server kernel: Console: colour dummy device 80x25
    Mar 18 10:05:03 arch-server kernel: console [tty0] enabled
    Mar 18 10:05:03 arch-server kernel: allocated 66060288 bytes of page_cgroup
    Mar 18 10:05:03 arch-server kernel: please try 'cgroup_disable=memory' option if you don't want memory cgroups
    Mar 18 10:05:03 arch-server kernel: hpet clockevent registered
    Mar 18 10:05:03 arch-server kernel: tsc: Fast TSC calibration using PIT
    Mar 18 10:05:03 arch-server kernel: tsc: Detected 4199.946 MHz processor
    Mar 18 10:05:03 arch-server kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 8399.89 BogoMIPS (lpj=41999460)
    Mar 18 10:05:03 arch-server kernel: pid_max: default: 32768 minimum: 301
    Mar 18 10:05:03 arch-server kernel: ACPI: Core revision 20131218
    Mar 18 10:05:03 arch-server kernel: ACPI: All ACPI Tables successfully acquired
    Mar 18 10:05:03 arch-server kernel: Security Framework initialized
    Mar 18 10:05:03 arch-server kernel: Yama: becoming mindful.
    Mar 18 10:05:03 arch-server kernel: Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
    Mar 18 10:05:03 arch-server kernel: Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    Mar 18 10:05:03 arch-server kernel: Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
    Mar 18 10:05:03 arch-server kernel: Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
    Mar 18 10:05:03 arch-server kernel: Initializing cgroup subsys memory
    Mar 18 10:05:03 arch-server kernel: Initializing cgroup subsys devices
    Mar 18 10:05:03 arch-server kernel: Initializing cgroup subsys freezer
    Mar 18 10:05:03 arch-server kernel: Initializing cgroup subsys net_cls
    Mar 18 10:05:03 arch-server kernel: Initializing cgroup subsys blkio
    Mar 18 10:05:03 arch-server kernel: tseg: 0000000000
    Mar 18 10:05:03 arch-server kernel: CPU: Physical Processor ID: 0
    Mar 18 10:05:03 arch-server kernel: CPU: Processor Core ID: 0
    Mar 18 10:05:03 arch-server kernel: mce: CPU supports 7 MCE banks
    Mar 18 10:05:03 arch-server kernel: LVT offset 1 assigned for vector 0xf9
    Mar 18 10:05:03 arch-server kernel: Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
    Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
    tlb_flushall_shift: 6
    Mar 18 10:05:03 arch-server kernel: Freeing SMP alternatives memory: 20K (ffffffff819f2000 - ffffffff819f7000)
    Mar 18 10:05:03 arch-server kernel: ftrace: allocating 20141 entries in 79 pages
    Mar 18 10:05:03 arch-server kernel: Switched APIC routing to physical flat.
    Mar 18 10:05:03 arch-server kernel: ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    Mar 18 10:05:03 arch-server kernel: smpboot: CPU0: AMD FX(tm)-4170 Quad-Core Processor (fam: 15, model: 01, stepping: 02)
    Mar 18 10:05:03 arch-server kernel: Performance Events: Fam15h core perfctr, AMD PMU driver.
    Mar 18 10:05:03 arch-server kernel: ... version: 0
    Mar 18 10:05:03 arch-server kernel: ... bit width: 48
    Mar 18 10:05:03 arch-server kernel: ... generic registers: 6
    Mar 18 10:05:03 arch-server kernel: ... value mask: 0000ffffffffffff
    Mar 18 10:05:03 arch-server kernel: ... max period: 00007fffffffffff
    Mar 18 10:05:03 arch-server kernel: ... fixed-purpose events: 0
    Mar 18 10:05:03 arch-server kernel: ... event mask: 000000000000003f
    Mar 18 10:05:03 arch-server kernel: NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    Mar 18 10:05:03 arch-server kernel: x86: Booting SMP configuration:
    Mar 18 10:05:03 arch-server kernel: .... node #0, CPUs: #1 #2 #3
    Mar 18 10:05:03 arch-server kernel: x86: Booted up 1 node, 4 CPUs
    Mar 18 10:05:03 arch-server kernel: smpboot: Total of 4 processors activated (33599.56 BogoMIPS)
    Mar 18 10:05:03 arch-server kernel: devtmpfs: initialized
    Mar 18 10:05:03 arch-server kernel: PM: Registering ACPI NVS region [mem 0xcff9e000-0xcffdffff] (270336 bytes)
    Mar 18 10:05:03 arch-server kernel: pinctrl core: initialized pinctrl subsystem
    Mar 18 10:05:03 arch-server kernel: RTC time: 15:04:53, date: 03/18/15
    Mar 18 10:05:03 arch-server kernel: NET: Registered protocol family 16
    Mar 18 10:05:03 arch-server kernel: cpuidle: using governor ladder
    Mar 18 10:05:03 arch-server kernel: cpuidle: using governor menu
    Mar 18 10:05:03 arch-server kernel: ACPI: bus type PCI registered
    Mar 18 10:05:03 arch-server kernel: acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    Mar 18 10:05:03 arch-server kernel: PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    Mar 18 10:05:03 arch-server kernel: PCI: not using MMCONFIG
    Mar 18 10:05:03 arch-server kernel: PCI: Using configuration type 1 for base access
    Mar 18 10:05:03 arch-server kernel: PCI: Using configuration type 1 for extended access
    Mar 18 10:05:03 arch-server kernel: mtrr: your CPUs had inconsistent variable MTRR settings
    Mar 18 10:05:03 arch-server kernel: mtrr: probably your BIOS does not setup all CPUs.
    Mar 18 10:05:03 arch-server kernel: mtrr: corrected configuration.
    Mar 18 10:05:03 arch-server kernel: bio: create slab <bio-0> at 0
    Mar 18 10:05:03 arch-server kernel: ACPI: Added _OSI(Module Device)
    Mar 18 10:05:03 arch-server kernel: ACPI: Added _OSI(Processor Device)
    Mar 18 10:05:03 arch-server kernel: ACPI: Added _OSI(3.0 _SCP Extensions)
    Mar 18 10:05:03 arch-server kernel: ACPI: Added _OSI(Processor Aggregator Device)
    Mar 18 10:05:03 arch-server kernel: ACPI: Executed 4 blocks of module-level executable AML code
    Mar 18 10:05:03 arch-server kernel: ACPI: Interpreter enabled
    Mar 18 10:05:03 arch-server kernel: ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-580)
    Mar 18 10:05:03 arch-server kernel: ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20131218/hwxface-580)
    Mar 18 10:05:03 arch-server kernel: ACPI: (supports S0 S1 S4 S5)
    Mar 18 10:05:03 arch-server kernel: ACPI: Using IOAPIC for interrupt routing
    Mar 18 10:05:03 arch-server kernel: PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    Mar 18 10:05:03 arch-server kernel: PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
    Mar 18 10:05:03 arch-server kernel: PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    Mar 18 10:05:03 arch-server kernel: ACPI: No dock devices found.
    Mar 18 10:05:03 arch-server kernel: ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    Mar 18 10:05:03 arch-server kernel: acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
    Mar 18 10:05:03 arch-server kernel: acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
    Mar 18 10:05:03 arch-server kernel: PCI host bridge to bus 0000:00
    Mar 18 10:05:03 arch-server kernel: pci_bus 0000:00: root bus resource [bus 00-ff]
    Mar 18 10:05:03 arch-server kernel: pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    Mar 18 10:05:03 arch-server kernel: pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    Mar 18 10:05:03 arch-server kernel: pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    Mar 18 10:05:03 arch-server kernel: pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
    Mar 18 10:05:03 arch-server kernel: pci_bus 0000:00: root bus resource [mem 0xd0000000-0xdfffffff]
    Mar 18 10:05:03 arch-server kernel: pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff]
    Mar 18 10:05:03 arch-server kernel: pci 0000:00:00.0: [1022:9600] type 00 class 0x060000
    Mar 18 10:05:03 arch-server kernel: pci 0000:00:01.0: [1022:9602] type 01 class 0x060400
    Mar 18 10:05:03 arch-server kernel: pci 0000:00:05.0: [1022:9605] type 01 class 0x060400
    Mar 18 10:05:03 arch-server kernel: pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
    Mar 18 10:05:03 arch-server kernel: pci 0000:00:05.0: System wakeup disabled by ACPI
    Mar 18 10:05:03 arch-server kernel: pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f
    Mar 18 10:05:03 arch-server kernel: pci 0000:00:11.0: reg 0x10: [io 0xc000-0xc007]
    Mar 18 10:05:03 arch-server kernel: pci 0000:00:11.0: reg 0x14: [io 0xb000-0xb003]
    Mar 18 10:05:03 arch-server kernel: pci 0000:00:11.0: reg 0x18: [io 0xa000-0xa007]
    Mar 18 10:05:03 arch-server kernel: pci 0000:00:11.0: reg 0x1c: [io 0x9000-0x9003]
    Mar 18 10:05:03 arch-server kernel: pci 0000:00:11.0: reg 0x20: [io 0x8000-0x800f]
    Mar 18 10:05:03 arch-server kernel: pci 0000:00:11.0: reg 0x24: [mem 0xfe9ffc00-0xfe9fffff]
    Mar 18 10:05:03 arch-server kernel: pci 0000:00:11.0: set SATA to AHCI mode
    Mar 18 10:05:03 arch-server kernel: pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
    Mar 18 10:05:03 arch-server kernel: pci 0000:00:12.0: reg 0x10: [mem 0xfe9fe000-0xfe9fefff]
    Mar 18 10:05:03 arch-server kernel: pci 0000:00:12.0: System wakeup disabled by ACPI
    Mar 18 10:05:03 arch-server kernel: pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310
    Mar 18 10:05:03 arch-server kernel: pci 0000:00:12.1: reg 0x10: [mem 0xfe9fd000-0xfe9fdfff]
    Mar 18 10:05:03 arch-server kernel: pci 0000:00:12.1: System wakeup disabled by ACPI
    Mar 18 10:05:03 arch-server kernel: pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
    Mar 18 10:05:03 arch-server kernel: pci 0000:00:12.2: reg 0x10: [mem 0xfe9ff800-0xfe9ff8ff]
    Mar 18 10:05:03 arch-server kernel: pci 0000:00:12.2: supports D1 D2
    Mar 18 10:05:03 arch-server kernel: pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
    Mar 18 10:05:03 arch-server kernel: pci 0000:00:12.2: System wakeup disabled by ACPI
    Mar 18 10:05:03 arch-server kernel: pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
    Mar 18 10:05:03 arch-server kernel: pci 0000:00:13.0: reg 0x10: [mem 0xfe9fc000-0xfe9fcfff]
    Mar 18 10:05:04 arch-server kernel: pci 0000:00:13.0: System wakeup disabled by ACPI
    Mar 18 10:05:04 arch-server kernel: pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310
    Mar 18 10:05:04 arch-server kernel: pci 0000:00:13.1: reg 0x10: [mem 0xfe9fb000-0xfe9fbfff]
    Mar 18 10:05:04 arch-server kernel: pci 0000:00:13.1: System wakeup disabled by ACP

  • Windows 8.1 boots to a black screen, I have to forcibly resart

    System Specs:
    2014 Macbook Pro
    Intel i7 2.5 GHz Processor
    Nvidia 750m Graphics Card/Intel Iris Pro?
    16 CB 1600 MHz DDR3 Memory
    OSX 10.9.4 Software
    Inquiring about boot up to 64 bit Windows 8.1
    So last night, I left my computer alone while it installed a windows update. When I came back, the apple login screen was open. This evening, I booted up to windows just fine, signed in, but quickly had to close the machine because I had to go back to my dorm. Got back, opened it up, booted up ACIV: Black Flag. Ubisoft Symbol and Abstergo Symbol display, and then the screen goes totally black, and the system stops making sound. I hard restart and attempt to reboot to windows. The spinning dots appear, disappear, screen looks like it's about to load into the windows login, goes totally dark. Hard restart again, this time I go all the way to OSX, sign in, restart from there. I reboot to windows and I am greeted by the spinning sign and a "please wait" message. It boots to a blue screen that tells me that there was a problem with the boot, gives the option to restart or browse the advanced recovery options. I browse, choose to reboot, hold down the option key, select windows and again it loads into a total black screen. Before I try again, and risk bricking my machine, does anyone know what's going on? What should I do?
    Thanks, guys.

    I've been manually updating the drivers via the Nvidia app. Last ones I installed were the game ready drivers for AC:U.
    I fixed the problem, however. I got the reboot/fix options up again and chose to fix it using a device, selected OSX as the device and rebooted from OSX. Everything was fine from there.

  • Windows 8.1 update - S440 ThinkPad black screen with flickering cursor.

    Hello,
    Sorry if this is answered elsewhere.
    I have an S440. I've had it for one week. Two days ago I downloaded the Windows 8.1 update from the store. Since then, when I start up the computer, it doesn't even taken me to the 'sign in' screen. There's just a black screen. When I move the cursor, it briefly appears, flickers, then disappears again.
    I understand this is an issue with the graphics drivers. So I ran Windows in safemode and disabled Intel R HD Graphics family and AMD Radeon HD  8600 series graphics drivers.
    This, unfortunately, hasn't fixed the problem. It still boots to a black screen with an occasionally flickering cursor. I'm currently running in safemode.
    Any advice?
    Thanks,
    Alex
    Solved!
    Go to Solution.

    Hi
    I also have an S440 and have tried 3 times to update laptop without success including updating all drivers and updates inc those from Lenovo.
    Is there a fix for this? Is this an AMD issue?
    My laptop is also very new and cannot believe it is incompatible with windows 8.1.
    Tried the compatibility checker with Windows 8.1and it didn't report any problems.http://windows.microsoft.com/en-gb/windows-8/upgrade-assistant-download-online-faq 
    Is there anything that can be done to get this working?
    Paul

  • Pavilion g6t wont boot after bios update now just black screen please help!

     I downloaded an update for the bios for my pavilion g6t-1d00 laptop running windows 7 64 bit. It started acting kind of funny but I didnt think anything of it til I tried to boot it up the next day and all I got was a black screen and a orange led light on the f12 button for the internet and the caps lock button after blinking afew times started the dredded two times every couple of seconds. I tried the windows key+B key power key, no luck. I cant access anything because I have no monitor and I'm at my wits end. I refuse to wipe my hard drive and start over even if I could! I cant access hp tools or manager or anything, please someone has to have a solution!

    @Fuschia4me,
    1.       You will have to use another computer
    2.       Access the HP.com site with the BIOS updates available here is the link
    3.       You want to select the F.36 BIOS version
    4.       When you click on the update then click download and it will ask you to save or run, you want to save to a flash drive
    5.        Once done insert the flash drive into your laptop
    6.       Turn the computer on and press the windows and B key like before
    If the process doesn’t work the first time I would try at least 2 more times.
    Please respond back at your earliest convenience.
    Thanks
    Clicking the White Kudos star on the left is a way to say Thanks!
    Clicking the 'Accept as Solution' button is a way to let others know which steps helped solve the problem!

  • TouchSmart 320-1050 Win7 Pro After Windows update, login results in a black screen + white cursor

    Hi ...
    After some Microsoft automatic upgrades were done om my HP TouchSmart 320-1050 this week, when I logged in after the reboot, all I got was a blank (black) screen and a white arrow cursor, which worked fine -but there was nothing -no video output on the screen. Even a <CTL><ALT><DEL> did not bring anything up on the screen and I had to force the system down with a hard power down. I tried with user logins and Administrator login but the behaviour was the same.
    I could boot and get a picture in SAFE mode but not with a normal boot and login.  There were NO ERRORS in the Windows event logs that seemed to shed any light on the issue.
    The system was shipped with Windows 7 Home Premium however I upgraded to Windows 7 Pro so I could join my domain.
    I couldn't diagnose the problem -with nothing showing on my screen- so last night I check what updates were installed to see about de-installing them from Safe mode.
    After de-installing the most recent Microsoft HotFix (KB2679255) and rebooting .... POOF!  I had my desktop displayed again after I logged in.
    I don't know what piece of software was interacting with this HotFix - but thought I should post the issue, just in case someone else encountered the problem... or someone in HP Support wants to investigate ... (Let me know and I'll supply what info I can.)
    Thanks

    thanks for letting folks know.
    ... an HP employee expressing his own opinion.
    Please post rather than send me a Message. It's good for the community and I might not be able to get back quickly. - Thank you.

  • Lenovo G505s windows 8, preparing automatic repair then black screen

    Hi,
    Since a few months I have a lenovo G595s with Windows 8 installed, the thing is I don't know much over computers, but last tuesday I was just working and my laptop was next to me without any task, and somehow when I was going to reuse the computer I wasn't able because the screen where all the apps are was frozen, so I tried with CTR ALT DELETE nothing happened, then I just turn it off, and since it only goes on with the Lenovo logo, in the under part says or appears Preparing automatic repair and like 1 min later it goes completely in black without turning off.
    I tried el the F keys at the beggining of the start, in the middle, with a windows CD as well, but I just don't get access to the BIOS or any other configuration, only black screen, doesn't matter how long I leave it on.
    If somebody could help me to find out what is happening with the computer.
    Thank you a lot

    hi Dlskmalpik,
    Welcome to the Lenovo Forums.
    Automatic Repair usually kicks in if there's a problem loading up the files that's required to start Windows. If the repair was interrupted and the screen just goes into a black screen then there's most likely a hardware component that's malfunctioning.
    To check, try to:
    1.Boot into the BIOS by pressing the OneKey Recovery button
      - Link to picture
    If successful, set the following settings in the BIOS:
    Security Tab:
    Secure Boot = Disabled
    Boot Tab:
    UEFI = Disabled or Legacy
    Boot Mode = Legacy
    Boot Priority = Legacy First
    Exit Tab
    OS Optimized Defaults = Other OS or Disabled
    When done, press F10 (or Fn+10) to save and exit and try to boot from your Windows CD (i'm assumming this is a Windows 8 disc).
    2. If you're successful in booting from the Windows 8 Disc, see Step 1 to Step 2 of this guide on how to proceed in fixing the issue.
    3. If the problem remains, consider re-instaling Windows by pressing the OneKey Recovery button and choose System Recovery
      - Link to picture
    In an event that the recovery fails, I recommend you contact lenovo and report the issue as you may need to send the unit for service..
    Regards
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Windows XP won't install. Black screen with cursor!

    Ok, so I originally partitioned the HD using 'Boot Camp Assistant". I had no problems installing Windows. When I plugged in the Mac OS X install dvd to install the drivers it always crashed. so, I went back into 'Boot Camp Assistant', delete and repartitioned the HD. Now when I try to reinstall Windows a black screen pops up with a blinking, white cursor at the upper-left-hand corner of the screen.
    I've tried:
    1. Repartitioning the HDD at least 5 times.
    2. Restarting and holding down option and selecting the windows dvd.
    3. Resetting a bunch of times.
    4. Ejecting and inserting windows cd over and over again.
    5. Renaming partitions.
    6. Hitting space bar continuously upon restart.
    Are there any remedies for this?
    Also, after partitioning, even without installing Windows... when resetting and holding down the 'option' button.... should it still show one partition or both?
    Message was edited by: enrique_david

    Well, I finally got it to work! What I did was turn off the computer, unplugged the cord from the back of the computer (not from the outlet), let it sit for 30 seconds, plug it back in and restart your computer. I got the tip from this article http://support.apple.com/kb/TA24192. Make sure you click on 'Reset the NVRAM'.

  • Windows boots but won't load (Black screen with cursor)

    [Sorry for the long post, but I feel the need to fully explain my situation]
    I have the following problem:
    I turn on my PC, and Windows shows it's normal loading screen, after which it goes into a completely black screen, with just the mouse in the middle. By the cursor size I can tell that it's in a low resolution, probably 800x600 (compared to my usual 1920x1080). I am able to move the mouse around, but with no particular use without something to click on. No other keyboard input seems to work, except for Shift key 5 times, which brings up the Sticky Keys dialog box (with just "Yes" or "No" options, no other link); and Windows key+U which brings up the Ease of Access center. Ctr+Alt+Del does NOT work.
    So far this is what I have tried (in chronological order):
    Boot into Safe Mode, Safe Mode with Networking, Safe Mode with Command Prompt, Booting in low resolution video, Last known good configuration: all yield the same result as booting normally.
    Repair your computer:
    Startup Repair: Found Registry Errors (I realized and fixed this later on)
    System Restore: Did not find any previous restore points (I know for sure that there are, I made a habit of making restore points regularly).
    Windows Memory Diagnostics: Did not find errors.
    Command prompt:
    Ran chkdsk /f /r command, did not report errors.
    Ran sfc /scannow : I don't remember the exact report, but it asked for a restart to finish repairing problems. I restarted, and ran the command again for the same result.
    Forced the scan with: sfc /scannow /offbootdir=c:\ /offwindir=c:\windows , it found and repaired some errors, still could not load windows.
    Ran Dell Startup Diagnostics, found no errors.
    Ran Startup Repair again, found the registry errors again. I found the solution to this in a Microsoft Help forum ( answers.microsoft.com/.../f77d5355-b8be-41d6-af24-cae994e1768f ), and fixed the issue. I rebooted, but the problem persists.
    Startup Repair now finds no errors. I tried System Restore again, it found 2 restore points dated AFTER my problem started. I decided to restore anyways, but neither of them worked.
    I ran Windows Defender Offline:
    Quick Scan: and found 2 threats and removed them.
    Full System Scan: found 4 more threats, removed 2 of them, the other two couldn't be removed because they were within an ISO file.
    I tried Steps 1, 2 and 3 again with no luck.
    With each step I am aware that I'm closer to having to reinstall Windows, so I decided to see if I could still access my HHDD to save my personal files. I made a Linux live CD (with Ubuntu), but I am having trouble mounting the drives, because they are in a RAID0 configuration. "sudo dmraid -s" gives the following error: "ERROR: isw: wrong number of devices in RAID set "isw_dbdffjficc_ARRAY0" [1/2] on /dev/sdb".
    Important Details:
    I changed my graphics card about 4 months ago (an Nvidia GTX 750ti for an ATI Radeon HD 6450), and I was told that I may be running short with the Power Supply. The new card asks for a minimum of 450W and I think my PSU is 460W. This may or may not have something to do with this issue, I have no idea.
    The RAID0 configuration of my 2 500GB Hard Drives brought me a lot of problems from day 1. One of the HDD would randomly fail (I am able to hear a different clicking sound when this happens), and the computer would crash. Upon startup, it would ask for a boot device. The Dell startup utility would then only recognize 1 of the drives, but would finish without errors. After a restart or two, all would be fine and windows would boot normally (aside from the usual error recovery screen) without any sign of corrupted data or anything. Like I said, this has been happening form the day my PC arrived, but restarting a couple of times always fixed it. As of now, both HHDD seem to be working fine, the Dell utility recognizes both of them, and does not find errors in any of them, and I can access any directory from the command prompt.
    Is there anything else I should try before reinstalling Windows?
    Before the install, I would really like to be able to recover my files (I have important documents from college), is there any way to do this?
    Sorry again for the extremely long post (and for any language errors, English is not my native language), and thanks in advance.

    Since you still haven't got your data from the drive(s). I would advise performing a Windows installation without formatting the drive... I don't like this solution but at this stage you have probably tried everything else.
    Use a Windows 7 Reinstallation DVD when installing ensure you select...
    Select Custom: Install Windows only (advanced)
    If you do not select any of the drive options and simply highlight the largest partition and select next:
    Windows will dump all the old installation files in the Windows.old folder

  • Windows vista 32 Bit Ultimate. Black screen after installing drivers B-Camp

    I installed windows vista Ultimate 32 bit on my 2.26ghz mac mini 2gb ram. after installing vista and setting up my account, i installed the drivers from the apple CD that came with the mac. it installed all the drivers and requested me to reboot, so i did. once i rebooted, i got a black screen with a thin green line through the center of the screen. i hear the bootup sound but that is all i see. Any tips or anything on how to fix this?

    How did you solve this? I am having the same problem.

  • Snow Leopard Upgrade gives a black screen

    I just tried to upgrade my MacBook Pro from 10.5.8 to Snow Leopard purchased from the Apple store. It shows the loading wheel then goes black. I can see the install screen if I hold a flashlight to the screen but I can't see the cursor so I have no way to click the continue button. I tried removing the Snow Leopard disc so I could at least return to the old OS but I can't reload Leopard because it goes to the black screen too.

    Looks like another trip to the Monterey store is in order.

  • Bios update failore with black screen and 3 time flashing, my product name is (Pavilion g6-2162se) .

    Hi
    I have Hp Laptop, my product name is (Pavilion g6-2162se), I downloaded The drivers from the page, when I installed all drivers, the bios updatede to, but its failore, and now my computer not working means with black screen and 3 time flashing .
    please help

    Hi,
    Check if this helps:
    Restoring the BIOS
    If it is blinking 3 times it usually indicates memory issue..So you can try reseating the memory modules or try one memory at a time in each slot..
    Refer the links below:
    HP Notebook PCs - Troubleshooting LED Blink Codes or Beep Codes During Startup or Boot
    Removing and Replacing a Memory Module for HP Pavilion g6-2000, g6-2100, g6-2200 and g6-2300 Noteboo...
    Note:
    If you have HP Support Assistant installed on the computer(The Blue Question Mark) then open it ==> Complete all pending Updates & Tuneups==> Restart and Check. It may solve your problem
    Although I am an HP employee, I am speaking for myself and not for HP.
    **Click on “Kudos” Star if you think this reply helped** Or Mark it as "Solved" if issue got fixed.

Maybe you are looking for

  • How can I convert an iMovie to a DVD?

    I have a movie created in iMovie and I need to put it into DVD format so that I can add menus and such. Help? I have a new Mac that is not supported by iDVD so what do I do?

  • Help i can't unsubscribe to all the messages in revel. It' filling up my in box!

    I can't find the action button to un-subscribe to revel complaints. It's filling up my e-mail in-box!

  • Output Preview showing confused results

    Hello all, Please bear with me as I attempt to explain a very odd occurrence I am seeing in Acrobat X. Also, my assumption is that this is something in the authoring tool confusing Acrobat, as if I attempt this using only Adobe products I cannot repl

  • Three Songs Not Showing Up in Playlist on iPhone4

    I've been playing around trying to figure out this problem for a couple of hours now and am stumped.  I have a newer iMac and iPhone 4.  I have a playlist that is called '2013'.  On my iMac, this playlist has 16 songs.  When I look on my iMac in iTun

  • ALV excel formatting

    Hi how to set in SALV some formatting in exporting to excel file. I want to convert some numbers variables to text format before will be create XLS sheet.