HP Probook 4440s WIFI Drivers Not Working After Windows 10 Update

I updated my Hp ProBook 4440s from windows 7 32 bit to Windows 10 32 bit, everything is working except for my WiFi it says 'Windows did not detect any networking hardware' Can you please provide me with the compatible wifi drivers for Windows 10 Pro 32 bit. I hope you can help

Hi: I guess what I meant to say is that you may want to play around with some of the advanced settings for the card in the device manager. It seems that reading the article you posted, that procedure may have been for folks that have Cisco software to allow for Virtual Private Networking (VPN) and I don't think the drivers you have include any Cisco extensions. You can see if there is Cisco networking software by going to the Programs menu in the control panel and see the list of programs installed. There are usually 2-3 Cisco networking software items listed if you do. Sometimes tweaking those advanced settings help. Here is an article that explains what some of these settings are for. http://superuser.com/questions/342759/can-somebody-explain-about-wi-fi-device-manager-settings-and-power-settings-in-w The ones I normally change are: Enable WMM. Set Roam tendency to conservative. Roam decision to optimize distance. I had to change some setting on an old Intel 5300 wireless card to allow it to connect in W10. The drivers were there, etc but when I went to connect to a network, it did nothing.

Similar Messages

Keyboard and touchpad not working after Windows 10 update

after udating windows 10 on my probook 4440s keyboard and touchpad not working. if i press a key for 10seconds the key then shows up in the screen. and touchpad is worst. it freezes all the time barely moves. but with usb mouse it works fine

It's known that installing Windows from an external DVD drive on a Mid 2013 MacBook Air causes that the keyboard doesn't work after finishing the installation. The fix is to install Windows by using a USB drive. See > http://support.apple.com/kb/TS4599

Touchscreen not working after windows 10 update.

Hello,I own an HP-Pavillion 15-n287cl touchscreen laptop. I updated my operating system today to windows 10, but after finishing the update my touchscreen dosen't seem to work. In fact it is not even reognized under the human interfaces tab in the device manager. I have tried intaling the HP drivers from the support assistant and the website but it still dosen't work. Any help on this would be much appreciated. regards.

It is not quite so simple.Windows 8.1 and Windows 10 do have native suport for touchscreens. There is the consideration that Windows 10 is a brand new OS. It has only been available to the general public for a single day. I am upgrading my current HP loaner HP Omen to Windows 10 Pro as I type this. I will know if the touchscreen works when it is complete. I am sure you don't completely rely on the touchscreen for input to the operating system. I only use the touchscreen once in agreat while if I even think about it. Wait for a few days and keep on trying the Windows update option. It will take some patience on your part. edit: The Windows 10 Pro update is complete. The touchscreen is still working just as it did before.

HP G62 touchpad scroll not working after Windows 10 update

Hello, As many, I am having a problem with my touchpad scroll. It stopped working after upgrade to Windows 10. I have an HP G62 Laptop and the touchpad listed is Synaptics PS-2 port. Can you please provide information on how to fix? Best,

Hi there ,  Thank you for visiting the HP Support Forums and Welcome! This is a great site to get answers and ask questions. I have read your post on the HP Support Forums. I understand that your TouchPad is not working correctly since you upgraded to Windows 10.  I did some research and came up with a couple different documents that may help you with the TouchPad.
1. HP Notebook PCs - Using the TouchPad or ClickPad (Windows 10)). 2. Using and Troubleshooting the TouchPad or ClickPad (Windows 8): You can customize and adjust how you scroll using one finger or two fingers and how the TouchPad or ClickPad responds to gestures near the edge. Here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers on your system that need updating for Windows 10. The Windows 10 drivers will become available on the HP Drivers and Downloads Page for your product as they become available to HP. There are some drivers available there currently.  Have a great day!

Touchscreen is not working after windows 10 update on HP Stream x360

Hi I Have a problem with my HP stream x360 after doing the windows 10 update. Seems that there is no drivers for touchscreen in windows 10 yet, even a generic driver. I've checked the devices manager and found 6 Uknown devices with no drivers. I installed the HP support assitant but didn't found any driver. Windows update neither. Under the Human Interface devices group i cant see the touchscreen and in the settings app is also absent. I also checked the diagnostic tool in the BIOS but the touchscreen is working fine. Please help me!!! Thank you four your help.

Hello , Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I read your post about the Windows 10 update, and wanted to assist you! You can try reviewing the following site for drivers:HP Products - Where Do I Find Windows 10 Drivers and Software for My Model? If you are still having trouble, then I recommend using the Go back to an earlier build option, in your System Settings: HP Notebook PCs - Upgrading to Windows 10
Once you are back to your original Operating System, check to see if you are experiencing the same issue. If not, then you may consider holding off on the Windows 10 update for a few weeks, until drivers can be updated. Please let me know if this information was helpful by clicking the thumbs up below.
Regards!

Touchpad scroll not working after Windows 10 update

Can you help? I am having a problem with my touchpad scroll. It stopped working after upgrade to Windows 10. I have an HP G62 Laptop and the touchpad listed is Synaptics PS-2 port. Can you please provide information on how to fix?

Hi there ,  Thank you for visiting the HP Support Forums and Welcome! This is a great site to get answers and ask questions. I have read your post on the HP Support Forums. I understand that your TouchPad is not working correctly since you upgraded to Windows 10.  I did some research and came up with a couple different documents that may help you with the TouchPad.
1. HP Notebook PCs - Using the TouchPad or ClickPad (Windows 10)). 2. Using and Troubleshooting the TouchPad or ClickPad (Windows 8): You can customize and adjust how you scroll using one finger or two fingers and how the TouchPad or ClickPad responds to gestures near the edge. Here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers on your system that need updating for Windows 10. The Windows 10 drivers will become available on the HP Drivers and Downloads Page for your product as they become available to HP. There are some drivers available there currently.  Have a great day!

HP Beats Audio EQ not working after Windows 10 update

Hi, I have an Envy 17t-j000 Quad Edition with Beats. After the Windows 10 upgrade, I have noticed that the Beats Audio EQ is not working. The left panel is working fine, but the right panel with the red sliders is not working. I move the sliders up and down, but nothing happens. Can you please help me fix this?

Hi Erico,I tried your method It says The best driver software for your device is already installed I Used this tool http://www.techspot.com/drivers/driver/file/information/16748/and I cleaned up all display drivers.windows searched in updates for drivers and updated all video drivers.now brightness control key is workingbut when i checked dedicated video memory it says 128 MB.but my dedicated video memory in 1024 MB.Take a look for Video memory

Brightness Control Hotkeys are not working after windows 10 Update

Hi Experts, I am Using HP Pavilion 15-NOO3TXRecently I Updated Windows 10 from Windows 8.1All Drivers are updated Sucessfully.I have Intel Graphics and AMD Radeon HD 8600both are also updated Sucessfully. but F2 and F3 hotkeys are not working for brightness adjustments.when i Unistall AMD Radeon drivers then hot keys are working properly(only with intel graphics) Please Take a look for my Drivers But in Video Memory it showing only 128MB Dedicated Video Memory I Installed AMD Drivers using autodetectutility.exe from AMD Website.how can install both AMD Radeon Drivers and brightness hotkey adjysutment.

Hi Erico,I tried your method It says The best driver software for your device is already installed I Used this tool http://www.techspot.com/drivers/driver/file/information/16748/and I cleaned up all display drivers.windows searched in updates for drivers and updated all video drivers.now brightness control key is workingbut when i checked dedicated video memory it says 128 MB.but my dedicated video memory in 1024 MB.Take a look for Video memory

Sony Viao inbuilt webcam not working after Windows 10 update

Hi thereJust updated to Windows 10 and now my inbuilt webcam is not working. Skype can't even recognise it.Under device manager it says there is a USB device with an error, but it doesn't say what it is. Disabling, uninstalling and restarting, and updating drivers do not work.I had windows 8 and 8.1 prior to this and the webcam worked fine. Please helpThanks in advanceMark

Hi mtaylor748,
Thank you for considering Sony Community!
Most probably the issue is with the Windows 10 driver since you mentioned the unit works with Windows 8 and 8.1. Unfortunately, we do not have the updated drivers for Windows 10 yet. Sony is still validating the updates from certain vendors and testing Vaio computers. You may check the announcement from Sony USA: http://esupport.sony.com/US/p/os10upgrade.pl? I'm note quite sure about the process in other country but feel free to contact Sony support in your location.
For further assistance, we kindly recommend visiting our Sony Global Web site for information on contacting the Sony Support Center in your region at http://www.sony.net/SonyInfo/Support/.
Hope this helps.
Best regards,
Vincent
If my post answers your question, please mark it as "Accept as Solution"

Wifi synch not working after 5.1 update!

After updating to 5.1 i'm having problems synching my iPhone 4s and iPad. The "synch" bar is simply greyed out on both devices. I have tried connecting both devices via cable in order to synch them, and this works fine. I have also tried to change the "synch with this iPhone", and then restarted the phone and then turned the synch in itunes on again. But no luck. Can anyone help me?
Thanks!

I had the same problem. As soon as I updated my iPad and iPhone to iOS 5.1. I tried different things, but I've just managed to add my phone back by unchecking the 'sync with this phone over wifi' then syning via cable. Then I re-checked the 'sync with this phone over wifi' and re-sync via cable. I unplugged my phone and it was then connected via wifi! I hope this can help.

TOuchscreen not working after WINDOWS 10 UPDATE. - HP 11-n002tu x 360

I need help. after updating to windows 10... my laptop's touchscreen is gone.NO HID Driver, NO PC Tablet settings. none. PLEASE HELP... :'((

It is not quite so simple.Windows 8.1 and Windows 10 do have native suport for touchscreens. There is the consideration that Windows 10 is a brand new OS. It has only been available to the general public for a single day. I am upgrading my current HP loaner HP Omen to Windows 10 Pro as I type this. I will know if the touchscreen works when it is complete. I am sure you don't completely rely on the touchscreen for input to the operating system. I only use the touchscreen once in agreat while if I even think about it. Wait for a few days and keep on trying the Windows update option. It will take some patience on your part. edit: The Windows 10 Pro update is complete. The touchscreen is still working just as it did before.

Lenovo Z500 touch brightness adjustment not working after Windows 10 update

Hi, i recently updated to Windows 10 and immediately noticed that the brightness of my laptop could not be adjusted. i had a similar problem when updating to Windows 8.1 but managed to solve it by downloading video drivers from the following link: http://support.lenovo.com/us/en/downloads/ds031547 I tried the same method to solve my current problem but it only works temporarily, as the next time i turn my laptop on, i have the same problem. Is anyone experiencing the same problem and has anyone found a permanent fix, because it's getting quite annoying. Thank you.

The intel HD graphics bundled with windows 10 seems to be buggy and in beta for now. so i guess we just have to wait for intel/microsoft to make a final release

Microphone not working after Windows 10 update

I installed Windows 10 onto my laptop and tried using Skype but my microphone isn't working. Neither the in-built nor my headset is picked up. Any solutions?

, Thanks for posting back check to see if it showing up in your device manager if not post back with the full model and product number. The lead may have come loose to the mic. Here is a link to help you with the model and product number. HP Notebook PCs - How Do I Find My Model Number or Product Number? With this information I will get you the link to your maintenance and service guide. Thanks again for the post and have a great day.

Wifi not working after latest iOS update

wif not working after latest iOS update 7.0.4. Any suggestions?

Same happening to my iphone no wifi or bluetooth since latest update tryed everything reset restore reset back to factory setting all to no avail phoned apple they want 155 pound for a replacement (cheeky #$%/$$#@) when everyone knows its there fault .i read phone may need new wifi chip if its out of warrenty cheaper to take to local phone doctor

My Wifi is not working after re setting the net work also

My Wifi is not working after re setting the network also.

Read here:
http://support.apple.com/kb/ts1559
If nothing helps, make an appointment at any Apple store.

HP Probook 4440s WIFI Drivers Not Working After Windows 10 Update

Similar Messages

Maybe you are looking for