Hp Probook 4510s quick look button...

Hello,
I have a hp probook 4510s and next to the power button there is a button with a email icon and a clock on it.
It normally take you to hp quicklook (this is when the laptop is not booted in to windows) but when i have the laptop off and click it is just come up and says bios app not found please install app...
Were can i get the bios app for this (HP Quicklook 2)?
Also
When i click it when the computer is booted it opens the hp info center,,, Is there any way to change this so that it goes to my outlook or better yet gmail?
Please Help...
Thanks

Sorry about that font size. here is the question again.
I tried to turn on my HP ProBook 4510s Notebook PC and it will not turn on. It worked just fine the night before, but nothing now. I plugged in the power cord and the HP emblem in the power button flashes. It still will not power on. Any suggestions would be greatly appreciated. Thank you in advance.

Similar Messages

Mail 3.6 (on MacOS 10.5.7) doesn't display 'Save' and 'Quick Look' buttons

I have recently updated to MacOS 10.5.7 and discovered a strange glitch in viewing certain emails with attachments. For a small minority of emails with attachments, the 'paperclip' icon appears in the mail list, indicating the presence of an attachment, but neither the icon for the attachment nor the 'save' and 'quick look' buttons appear. Options to save the attachment or quick look the attachment under the File menu do work.
Clearly the attachment is there but Apple Mail 3.6 doesn't know how to indicate it. This inconsistency in the interface's feedback about attachments has been very irritating.
Remedies I have attempted thus far:
• Rebuilding the mail box (no change)
• Disabling all Mail extensions (bundles)
• Examining the raw mail code (nothing obvious wrong, but I am not an expert).
The problem is currently present for some Microsoft Word file attachments, but I have no clue if it is limited to just those attachments.
I will note the latest email with this failure to display attachments was sent by a colleague using Apple Mail on an iPod Touch, so I can't believe it is a mangled attachment. It is not limited to a single sender, so again, no reason to believe mangled attachments.
I would really appreciate any suggestions for how to fix this...

I disabled the mail extensions by removing them from the ~/Library/Mail/Bundles/ directory. I didn't think the mail extensions could get patched into Mail.app by any other means, but if you care to clarify I would appreciate it.

Missing Quick Look Button

I just installed Snow Leopard and noticed that my Finder has no Quick Look Button. Does anyone know why it's not there and how I can get it back? I know I"m supposed to have one.........please help

control-click on the toolbar of any finder window and select "customize toolbar". drag the quicklook button back to the toolbar.

"Save" and "Quick Look" buttons not showing in Apple Mail

Dear list members, in Apple Mail on my new iMac, the buttons "Save" and "Quick Look" are not showing in the messages. That's very odd, because I can see those buttons in my old mac normally. I tried one solution proposed in another thread (Mail>Preferences>View>Details>All) but it didn't work. Could you please help me? Thank you.

Sorry, if I'm mistaken, but I thought this was the OSX forum. In my title bar, I see:

Visualización de Quick Look

Mi Macbook Pro 15' de 2009 corre actualmente con OS X Lion 10.7.3. mi duda viene a que hasta hace poco la función Quicklook o Vista Rápida (clickear la barra espaciadora sobre un ícono en Finder) funcionaba igual que en cualquier otro MacBook, y repentinamente, o por algun cambio que hice sin darme cuenta, ahora cuando utilizo esa función, se me presenta una ventana mucho más compacta que la que solía aparecer, he buscado por todos lados como dejarla como venía y no he encontrado respuesta.
Antes:
Ahora:

Um ... Your profile says you are using OS10.4. On the assumption you are actually using Leopard:
The easiest way to invoke Quick Look is to select the file and hit the spacebar.
The Quick Look toolbar icon looks like an eye. Right click on the toolbar at the top of any Finder Window and choose Customize Toolbar from the resulting menu. You should see a Quick Look button in the drop down pane. Drag it to where you want it on the toolbar and click Done.
Message was edited by: Jeremy P

Quick Look taking FOREVER after upgrading to Lion

Hey everyone. I have a mid-2008 24" iMac running with 4GB of memory. I recently upgraded to Lion and almost everything seems to be working great. One thing that is not working, however is Quick Look which is really not working at all. Back on Leopard or Snow Leopard, I would open up a folder full of jpgs, hit the Quick Look button and a preview of the picture would pop right up. I could then even arrow through the folder with each picture showing right up.
On Lion, this is not the case. I open a folder or picture files now, hit the Quick Look button and the picture comes up after about 30 seconds. Now, when I arrow around, the title for the Quick Look window changes but the new pictures never come up. Is anyone else having this problem? This is very frustrating and I am not sure why this feature the older OSs worked fine a but not now. Any help would be GREATLY appreciated.

Hi,
I got the same issue with my 2007 imac with 4gb ram, in the dowload & document folder on the dock it doesn't load the icons anymore, useto work before untill today after i upgraded my ram, dunno if that could be the issue, could it be?
Thanks..

Probook 4510s will not boot

I have a Probook 4510s that I got from work. I ordered the original CD's and loaded the OS and drivers. I was getting it set up for my church and had all the software installed. I wanted to remove the Credential Manager so that there wasn't 2 icons on the opening screen and removed it through Control Panel/Program and Features/Uninstall. When I rebooted after the install, the laptop does not recognize the CD Drive or hard drive and does not boot up. In the BIOS set up, I matched the options with another computer of the same model that is working. it now acts like it is reading the CD, but still doesn't boot. The only difference between the 2 is that there are 2 entries missing for HP Quick Look and Prebooth Authentication on HP Quick Look. And there are no devices in the boot order.
I tried moving an already imaged hard drive from another Probook of the same model and it doesn't read that hard drive either. Is there a way to recover or have a damaged my motherboard?

I assume you mean it won't boot from the Recovery cd? Since this is a business class laptop I would suggest posting in the Probook specific forum where they should know more about Credential Manager on business machines and if there is a solution to resolve this.
http://h30499.www3.hp.com/t5/Notebook-HP-ProBook-ZBook/bd-p/bsc-274#.VRoS2vnF-4w
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Some Pages documents do not show up in Quick Look properly

After upgrading to Yosemite, when hitting the Space button on some Pages docs to see them in Quick Look, all I get is a thumbnail of the doc next to it's title, last modification and size. This is not the issue with all Pages docs, but only with some. Other Pages docs will open in Quick Look just fine and I can scroll and read through them perfectly.
I completely don't understand why some Pages documents won't open in Quick Look, and some others do. I'm running on a 13" Retina Macbook Pro.

Mail quick look docx links no longer work

After upgrading the OS on my 2-year-old MacBook Pro to Yosemite (10.10) and also the new Mail update (8.0), I have lost a small, but very useful (to me) functionality. When someone sends me a .docx attachment in my email, I usually press the spacebar for quick look. Then, if there are links in the document, I can click on them, Safari opens an goes to the linked webpage. Now after the upgrades, I press the spacebar for quick look, and when hovering the pointer over a link the pointer changes as expected to the "hand" for clicking links, but when clicked nothing happens. Safari doesn't open, no webpage comes up. It's as if I never clicked anything.

Have your tried resetting your iPad?
Press and hold both the Sleep/Wake button and the
Home button for at least ten seconds, until the Apple logo appears.

Apple mail - Quick look crash

When i open an attachment in Apple Mail 7.2 with the Quick look function. (Cmd+Y) and click the 'Open with ......' button Mail crashes.
I tried different default applications; Adobe Reader, Preview with Pdf attachments and Photoshop, Preview with jpg-attachments.
I created a new user and set up my mail account, tried to open attachments with the same result.
Repair permissions didn't help either.
Hopefully someone knows a solution.
Thanks.

Same for me. I noticed this already when I installed Lion early 2012. Then I went back to Snow Leopard. Now I have just installed Maverick and it's exactly the same.
Thus, the issue is old and I assume Apple must be aware of it.

What is the use of plus (+) icon on Quick Look?

When select a file in finder and press <spacebar> for Quick Look, I see a new icon next to the (x) close icon. What is the purpose of that? I clicked on it and nothing happened.

It does exactly the same thing as all the other plus buttons in OS X, it makes the window big enough to see all of the content. To illustrate, drag the corner of the quicklook window to make the window too small for the content, then click the plus button to put it right.

Quick launch buttons and touch functions not working post win7 upgrade

I have several problems that I think are related.
1) When I rotate the screen and then bring it close (as in flat) to the keyboard, the screen goes blank. There is no key combination I can find that restores the screen. Putting it back in notebook orientation doesn't do anything either. Only thing to do is a hard reboot.
2) the quick launch buttons on the screen edge are not functioning as follows:
a) the hp mediasmart button (the one with the wave) doesn't work
b) the screen rotation button produces the same problem as 1) above
c) the third button which looks like either gears or a sun (I don't know what it should do) brings up the windows mobility center, where I have found problem number:
3) On tablet PC settings, the display tab, there is one display: 1. mobile PC display
on the same tab, there is a setup button. The next screen says:
pen input
touch input
Regardless which one I select, on the following screen (where it says Press this screen with ....) when I press with either my finger or the pen, nothing happens. Which seems like either:
it thinks another screen is active or
the touch components are completely non functional.
4) Not surprising, the touch functions are completely non-functional
I have installed all of the drivers for this TX2-1025dx for Win7(64bit) per the HP support/drivers page.
Not all of them resulted in a clean install.
Here are other drivers that I had problems with (meaning that I got an error message, it failed, it had to be done more than once, something else broke, etc.)
AMD AHCI - started catalyst installer then failed
Authentic fingerprint driver - "dpinst64 not marked for installation"
Ntrig Duosense - had to do this one multiple times to get the fingerprint reader to work
HP Mediasmart MVP - hung in CMD
I have checked that all of the startup services are actually enabled in msconfig including quick launch buttons, hpwuschd, and media smart. Nothing is disabled in services.
I have reinstalled the quick launch buttons driver for this product from December 2009. (There is an earlier version from November.)
I installed the bios upgrade (before win7, actually) it is currently F.25
I have also eliminated EMF possibilities.
I have searched the forums, and while I have found some interesting clues, I don't see anything like this - at least with a solution.
Any assistance would be greatly appreciated as this thing is quite useless to me as it currently functions. It is not a tablet anymore.
TIA

[knock knock] Helloooooo??!!??
Installed 6.50.9.1, which is in between the last two quick launch button (QLB) drivers (that did not work). Also fixed the lightscribe and mediasmart DVD installs. Same problems, no touch or pen, and a new bug I discovered with qlb
First, if you search for tablet in the start menu, there is a selection to set the tablet buttons to perform certain tasks. When you run that, it says that teblet buttons are not installed on this pc. Doesn't matter if QLB is installed or not - same error. Hmmmmm. Check with your pc manufacturer..... I think I am doing that. I am starting to feel like I am working for HP.
Next finding: Using mobility center, I found that if you orient the screen to landscape for the slate config, and then rotate the screen, it does not go blank. However, if you rotate the screen back to notebook, it goes blank. And of course it keeps that upsidedown config when you reboot, too. So, the way to recover from that (because you really need a keyboard if you don't have a working pen and touch takes 30 sec to respond) is to keep trying to get touch to orient the screen back to landscape for notebook. Then rotate the screen to landscape for notebook. And uninstall the QLB driver that doesn't work and reboot. But after that, touch and pen did not function.
Since touch and pen had previously been restored when I uninstalled QLB, I reinstalled MVP and smartmenu coz they were the actions that I took the last time before touch and pen returned. Didn't work this time, tho.
I decided to do a system restore back at the point that I had used HP Advisor, since that was the last time I made note that pen and touch were working. Restore failed because a sfi.dat file was not found (and search didn't find it anywhere either). I tried 5 different restore points, before and after that one, and they all failed. But the first time around, I had touch on the logon screen, just not after windows started. The next time, I had touch but not pen. The next time, I had touch and pen, but only for a period of time (I think HP Advisor may have been the intervening event) before they stopped working.
Oh, and HP advisor does not appear to be actually installing the things on the action list. That could be an issue with Comodo, but it really looks more like an issue with that "mother may I" message from Windows asking for permission to run the program. Often as not, windows reports that the program is not responding. Closing the program with that dialog box actually gives it the kick in the knickers it needs to complete.
A not so great workaround is to use the mobility center to orient the screen when you want to put the thing in slate mode. You can pin it to the task bar (with a little fiddling). Touch is extremely slow to respond in slate mode. For example, it took about 3 minutes to get the screen oriented back around to notebook config, which is 4 "clicks" if things are working right. Pen works sort of OK (although I haven't tried any writing) . Gestures for scrolling do not work.
I am done with the troubleshooting until someone comes up with other targeted ideas.I have been keeping detailed chrono notes.
Again, I hope the information here leads to a solution. This unit is not a functional tablet and I don't want to stay with Vista, neither should I have to since this is supposed to be compatible.

How can I return to the Snow Leopard version of Quick Look?

Lion does not allow playing more than one movie clip in succession, using Quick Look. In Snow (and earlier), you can select a bunch of clips, hit the spacebar, and they each play in alpha/numeric order without clicking the arrow button to play the next one. So, if your movie project is 10 clips in a folder, you highlight each and hit Space (play), you've got to click the forward arrow per clip. That's 10 times. You can't see your project as a whole. How can you get that function back? It's the same deal when quick-looking photos.
I prefer this method because it does not put what you view into the Recent Items.

The only way to return is to remove Lion and reinstall Snow Leopard.

Satellite P300 - Quick launch buttons don't work after Windows 7 upgrade

I upgraded my Satellite P300 from Vista to Windows 7 professional. Initially everything worked fine, now for some reason the inbuilt microphone and the speakers do not work. I subsequently found that none of my 'Quick Start' buttons work, ie I cannot turn them ON or OFF, so perhaps the quick start Mute button is OFF, hence no sound. A computer check of the Microphone and the Speakers confirm that they are working so I guess the Mute button is On, no sound.
Is there any way I can get the Quick Start buttons to work again or turn the mute button OFF so that I can get sound. The funny thing is the speakers work if I use Skype, but I cannot play a CD.
Any help would be greatly appreciated.

Hi Dr Lamp
Thank you for your reply. After upgrading from Vista to windows 7 from the disc everything worked fine, a month later for some reason the sound just stopped. When I play a CD or select music from the computer and double click on the speaker icon I can see the music playing but there is no sound, it is muted, but why I do not know.
It is interesting that you Added Vista stuff because when I had Vista everything worked fine, I just didn't like it much. As I am a novice how did you add it. If I add something, does it run alongside Windows 7 or does it replace some bits. The reason I ask is that in Windows 7 the courser jumps around in Word making writing letters difficult, I have to disable the pointer when writing which is a pain.
Looking forward to hearing from you and thanks for your help

HP Quick Launch buttons incompatibility Windows 8.1 / Unable to Launch IE 11 and my yahoo home page

I have an HP Envy dv6 notebook PC Product # C2L31UA #ABA. I upgraded to Windows 8.1 several weeks ago and everything seemed to be working fine. About 3 weeks ago I started having problems with "internet Explorer stopped working" happening all the time. I also seem to have problems with installing updates from HP with failed updates then these problems start occuring. 4 days ago I was unable to launch IE 11 on my desktop or myyahoo home page. IE 11 is not working on my desktop or from the tile on Windows for Internet Explorer. I am able to use google and have been trying to search for solutions. I did find out from a scan that HP Quick Launch buttons are incompatible with Windows 8.1. I thouhgt this might be the problems. I have tried to remove it unsuccessfully. I have spent 4 days trying to fix my computer with no results. I thought I had uninstalled HP quick launch buttons late last night and I did briefly get my desktop to launch last night at 1 AM. However this morning It is not working again and the HP button is still on my computer. Not sure if this is what is causing all of these problems ? I also tried doing a system restore and it failed also. Can someone tell me what I should do? Thanks so much! I am not very computer savy so I am getting very frustrated.

Hello @luvpatch,
I understand that you are not able to use the HP Quick Launch buttons after upgrading to Windows 8.1, and I would be happy to assist you in this matter!
The first step I recommend is to completely remove HP Quick Launch from your system by using this Microsoft Fixit tool: Fix problems that programs cannot be installed or uninstalled. Once the program is removed, please restart your computer.
To further diagnose Internet Explorer on your system, I recommend following Resolving issues in Internet Explorer (Windows 8), as well as Troubleshooting Wireless Network and Internet (Windows 8). This should help to re-establish a consistent connection between your notebook and wireless network.
If the issue continues, I recommend performing a backup and refresh back to when Windows 8 was still installed on your system. To do this, I recommend following this resource on Backing Up Your Files (Windows 8), as well as Refresh Your PC to Resolve Problems (Windows 8).
Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Hp Probook 4510s quick look button...

Similar Messages

Maybe you are looking for