HP probook 4540s - display upgrade to 1920x1080

I have a probook 4540s. Can i upgrade display panel from basic 1366x768 to HD panel 1920x1080?
Is the motherboard of this model support panel bigger then 1366х768 resolution?

Hello dsconnell,
Your ProBook is a Business model. Your issue would be best answered on the HP Enterprise Business Community Forum
Good luck!
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Similar Messages

HP Probook 4540s upgrading RAM

Hi,
I would like to upgrade my memory (4GBs are not enough in theese days) for probook 4540s
Now, I have 1 module with theese specifications:
CPU-Z:
DIMM #               1
   SMBus address       0x52
   Memory type       DDR3
   Module format       SO-DIMM
   Manufacturer (ID)   Hyundai Electronics (AD000000000000000000)
   Size           4096 MBytes
   Max bandwidth       PC3-12800 (800 MHz)
   Part number       HMT351S6CFR8C-PB
   Serial number   (Personal information removed)
   Manufacturing date   Week 38/Year 12
   Number of banks       8
   Nominal Voltage       1.50 Volts
Question is:
Can I add newer model to the second slot?
I want to buy:
HP SO-DIMM 4GB DDR3 1600 MHz Unbuffered
Certificated for PC3-12800 (B4U39AA)
It seems, the new model of ram module should be compatible with my notebook, but will be compatible with my old module, while working on 2x higher frequency?
Or I have to buy 2 new modules and replace the old too?
Or I missed something and it is not compatible in any way?
Also, I have red at other forums, that upgrading memory up to supported 16GB takes some performance issues. Is it still ture, or is this already fixed?
Thanks for answer

Hi ,
The model supports the following specification of memory.
Standard
DDR3 PC3-10600 SDRAM (1333 MHz)
Two SODIMM slots supporting dual-channel memory.
2GB and 4GB SODIMMs
Maximum
Upgradeable to 8192MB with optional 4096MB SODIMMs in slots 1 and 2.
Dual-channel
Maximized dual-channel performance requires SODIMMs of the same size and speed in both memory slots.
Please find the link
http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c03349709&sp4ts.oid=5229455&lang=en&c...
http://www8.hp.com/h20195/v2/getpdf.aspx/c04126959.pdf?ver=4
I'm an HP Employee.
The opinions expressed here are my personal opinions, not of HP.
Make it easier for other people to find solutions, by marking an answer “Accept as Solution” if it solves your problem.

CPU upgrade for HP Probook 4540s

Hi Support Forums!,
I have recently purchased an HP Probook 4540s (Energy Star gen 3 i5 2410m 2.5 Ghz) notebook.
Does this model have a socket cpu, which would allow the cpu to be upgraded later?
If so, what i7 cpu types/models can it be upgraded to?
Cheers
Mike

Hi Mike,
Your ProBook is a Business model. Your issue would be best answered on the HP Enterprise Business Community Forums
You will have better luck getting the answers to your questions if you post it over there.
Good luck!
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

HP ProBook 4540s USB 3.0 Driver

Good evening! I am having an issue with my USB 3.0 drivers for my HP ProBook 4540s. I had done my own research on the problem and came across another forum post (http://h30434.www3.hp.com/t5/Hardware-Upgrades-Replacements/ProBook-4540s-USB-3-0-drivers/td-p/32518... and had tried to install that driver. I have tried the driver in the past as I believe it to be the problem that I am having and it comes up with, "This computer does not meet the minimum requirements for installing the software." everytime i try to install. The issue that i am having is that no device I put in my 3.0 ports is recognized by windows and it does not display them under Computer. Have tried keyboard and mouse in the ports as well with nothing but power. Any suggestions will help. I KNOW I need to replace my motherboard but that is for a battery problem that HP gave me the runaround with until my warranty expired and now is refusing to help. (I have been working with HP to resolve my motherboard issue for over a year now and am STILL getting the runaround from everyone I talk to) PLEASE HELP with USB.

Thanks for the reply so fast! I am getting the same error when trying to install. I will attach screenshots.

Processor hangs after adding more RAM to probook 4540s

hey ALL
recently i upgraded my laptop hp probook 4540s to 16 GB RAM
I am having two identical (Same part numbers) RAM sticks of following specs:
manufaturer: TRANSCEND
Memory : 8 GB (each)
Frequecy : 1600 MHz
Type : DDR3
PC3 : 12800
the issue is the lowness of processor. Processor utilization meter shows 70 to 80 % utilization with these two sticks running.
If i install only single module of 8 GB then the System runs great. i have checked both modules individualy by installing each of them in single channel configuration. also i changed the slots in single channel configuration. in single channel configuration everything runs great.
the complete specs of my system are :-
Specifications
do anyone have any idea of what is going on
i shall be very thankfull to everyone for helping me on this

Hi,
According to the Maintenence & Service guide for your notebook a maximum of 8GB is supported in your notebook.
The modules supported are PC3-10600, 1333-MHz, DDR3. They are not PC3 12800 modules like the ones you have installed.
That would seem to explain the issue you are having.
Best regards,
erico.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

HP Probook 4540s: Fingerprint Scanner Not Working

Hi,
Problem: Fingerprint Scanner - Windows log in does not give option to log in via fingerprint scanner.
Overview: After installing fingerprint drivers from the HP site and using the HP Protect Tools to successfully enroll fingerprint, I tried logging in via this method but the windows log in screen does not display this option. Device manager correctly identifies and shows the fingerprint sensor - however, the control panel says no biometric devices detected.
I really need help in sorting out this issue. Details of what steps I took trying to make the scanner work are given below.
Specs:
1) Probook 4540s
2) Windows 7 64-bit
3) i5-3210m, 1Gb Hd 7650m, 4 Gb 1333Mhz, 750Gb 5400rpm, VFS 491 Fingerprint scanner.
Details of the problem and steps I took to install drivers:
After a fresh installation of Windows 7, I went to the HP driver site to download the latest drivers for Probook 4540s:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=5229457&...
I installed the drivers in roughly this order:
1)realtek ethernet controller drivers,
2)audio drivers,
3) the chipset and USB 3.0 drivers (but not the Intel MEI driver)
4) Intel video driver: faced an issue such that drivers were not being allowed to install. After disabling switchable graphics in the bios, I was able to get these drivers to install.
5) AMD video drivers: installed after the intel HD graphics driver - installed but Catalyst Control Center was not being displayed. So I re-enabled switchable graphics in BIOS, re-installed these drivers and CCC was now available.
6) HP hotkey support
7) HP universal camera driver
8) Validity Fingerprint sensor
9) Synaptics Touchpad driver
10) Atheros wifi & bluetooth
11) Jmicron card reader
After driver installation, I installed the HP Protect Tools. After prompting for a PC reboot - which I did - it asked for setup of security etc.. Part of this pocess was the enrolling of my fingerprints - successful. However, upon log off/ restart of windows, an option to log in with the fingerprint scanner did not appear in the Windows log in screen.
I opened the Control Panel, and found there was no biometric devices tab, even though device manager showed biometric device and validity sensor (VFS 491). I then proceeded to uninstall HP protect tools and the validity driver for the fingerprint sensor, then made sure these services were running:
-Credential Manager
-Remote Procedure Call (RPC)
-DCOM Server Process Launcher
-RPC Endpoint Mapper
-Windows Biometric Service
-Plug and Play
Then as suggested in another forum post, I first installed this :http://ftp.hp.com/pub/softpaq/sp55001-55500/sp55109.exe and then the validity drivers from 4540s drivers page, and then HP Protect Tools.
After reboot HP Protect Tools as before would enroll my fingerprints, but again no prompt at windows login came to log in with fingerprint. However, one change after the installtion of http://ftp.hp.com/pub/softpaq/sp55001-55500/sp55109.exe was that in control panel there is now a tab for biometric devices; however, it says that windows did not find any biometric devices installed. An image is attached showing both the device manager and the control panel!
Please HP provide a solution. Thanks!
This question was solved.
View Solution.

Ok problem solved. I dont know whether it is related to the installation of HP windows 7 Essential System Updates and Intel MEI driver or not - but I did install these.
What really worked without doubt was this - > install both the fingerprint drivers and then the HP Protect Tools. Once rebooted, open HP Protect tools, then go to administration in the bottom right corner -> Administrative Console ->Increase System security -> tick windows login security and your done. Now you will be able to log in via enrolled fingerprints.

Probook 4540s view rotates (almost) randomly. Please help

Hi, this is a Probook4540s. I have recently updated to Windows 8.1. The view on the display started rotating upside down when I lean the laptop backwards and forwards, when I click buttons on the toolbar and sometimes when I click the close / minimize buttoms.
I can rotate the view to the normal view by leaning the laptop forwards or by clicking alt gr + upper arrow (only if the keyboard is in Romanian. It's very frustrating, since I hold the laptop on my la and make slight mooves.
How do I make it stop?
any suggestions will be appreciated.
Many thanks!

Hi AlinaBulina,
Your ProBook 4540s is a commercial product and to get your issue more exposure I would suggest posting in the commercial forums. Here is a link to the Commercial Notebook forum.
Thank you,
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Probook 4540s HHD randomly gets very slow

Hey, I have hp probook 4540s running windows 7 ultimate 64bit.
Problem is HDD sometimes (after startup) being very slow, transfer speeds according to resource monitor are ~200kb/s, windows startup takes around 30minutes. HDD transfer speeds do not get better no much how long u wait.Cpu and memory usages are regular (=low) while this happens.All diagnostic programs (hp ones) do not find any issues.
First I assumed it being a virus or windows problem so I formatted HDD and re-installed win7, a few days went by and it happened again. Computer has latest bios, and drivers, except update sp59047.exe which should be firmware for hdd this computer has. Running this sp59047 opens window which says hdd is correct for this update.. then it restarts computer which ends up in ms-dos looking command prompt saying failure. This environment has autoexec.bat and auto2.bat which both return 'failure' while i try to run them.
HDD itself cant be seen but it has sticker 'replace with hp spare 641672-001 and 8k12a0. I'd expect software issue but this is fresh windows 7 with only regular stuff (firefox, adobe flash, .Net, directx, teamviewer, and kaspersky antivirus).. when problem first time appeared this computer didn't have any antivirus, so likely kaspersky isn't causing it. So, ideas what might be the problem? Lack of that firmware update? HDD about to fail? Computer still has warranty for 2 weeks, but I hate dealing with dealers when problem is something like this which passes build in-tests and happens randomly. Haven't tried with HP yet thou.

I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this <HERE>
HP ProBook 4540s Notebook PC Support Page
TwoPointOh
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Hp probook 4540s .. Finger print sensor is not appearing in hp protect tools

Hello ... I've recently bought HP Probook 4540s and everything works fine except the finger print sensor My labtop has windows 8 installed and all drivers and devices are workig fine but the finger print sensor is not appearing in the windows device manager or in the hp protect tools neither.. At the beginning i thought it's a hardware problem untill the operating system detected the finger print sensor while i'm logging on this happened just once and i dont know how to get the sensor work again I've installed the latest validity finger print driver and hp protect tools and hp security manager everything from hp drivers site but nothing helps What do you think i miss here ??

Hello Eng_MG
I see that you are having problems with the finger print reader on your HP computer.
I would suggest posting this message in the HP Commercial Forum as well. There will be more users with the same computer and programs. The link will take you to the board specific for your computer.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Hp probook 4540s support sata 3

Hello.
I want to buy HP ProBook 4540s and I will replace its HDD with a Sata III SSD. So my question is hp probook 4540s support sata 3 оr no?
thanks in advance
This question was solved.
View Solution.

It work. nice HP
this is my ssd speed test
My set up

SSD for Probook 4540s

do probook 4540s with windows 7 ultimate 64-bit support SSD storage, and if it support, will it replace my HDD or my optical drive ?

Hi,
Normally we replace the HDD with SSD, you can use the ODD but you need more hardware for it. Replacing HDD with a SDD is very simple interms of hardware but recover software may take a bit longer. The following shows how in general which can apply to many other machines.
http://www.pcworld.com/article/192930/how_to_upgrade_your_laptop_hard_drive_to_an_ssd.html
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Probook 4540s charging led blinking

My charging led blinks and the laptop won't power on
This happens if i connect the charging jacks(without the battery) in the following order: 1st insert in the laptop 2nd in the outlet, If i do it backwards, first in the outlet then i connect the charging jack to the laptop it works fine, It bothers me that every time i have to dissconect the charging jack from the laptop and plug it in after i ve plugged the plug in the outlet. I have 2 friends with same laptop and they don t have this problem.

Hi mihailgreceanu,
Your Probook 4540s is a commercial product and to get your issue more exposure I would suggest posting in the commercial forums. Here is a link to the Commercial Notebook forum.
Thank you
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Forgot bios password of hp probook 4540s

Dears,
Last week I purchased a brand new hp notebook, Probook 4540s core i5. and i have installed windows 7 with 32bit.
unintentionally i set the bios password, now i don't remember it.
please help in recovering the bios password. your suggesstions will be highly appreciated.
Thanks in advance.
Regards,
Shariq Farooq.

Fighterspirit.
This should help.
http://h30434.www3.hp.com/t5/Notebook-Recovery/6550b-BIOS-password-chip-replacment/m-p/2644701#M2720...
This is your BIOS chip.
http://www.ebay.com/itm/UNLOCK-HP-PROBOOK-BIOS-PASSWORD-CHIP-4340s-4440s-4540s-4740s-4710s-6470b-657...
REO
I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damage that may arise to your system by using these services. Please be aware that you do this at your own risk.
HP Expert Tester "Now testing HP Pavilion 15t i3-4030U Win8.1, 6GB RAM and 750GB HDD"
Loaner Program”HP Split 13 x2 13r010dx i3-4012Y Win8.1, 4GB RAM and 500GB Hybrid HDD”
Microsoft Registered Refurbisher
Registered Microsoft Partner
Apple Certified Macintosh Technician Certification in progress.

Enable Hyper-V in Windows 8.1 runing on HP Probook 4540s

Hi all,
I can not enable Hyper-V on my laptop HP Probook 4540s. The OS is Win8.1 Pro. Everytime I am trying to do that, it's freezing!!!
I need help.

I have same problem what I did was
1. System Configuration > Device Configurations > Virtualization Technology <-- ENABLE this
2. System Configuration > Set Security Level > Data Execution Prevention <-- set to Change
3. System Configuration > Set Security Level > Virtualization Technology <-- set to Change
also disable the data execution in System
Configuration > Device Configurations >

HP Probook 4540s - Windows 8.1 - Battery issues - Closing unexpectedly

Hello,
I have a 1 year old HP Probook 4540s that recently has the following problem.
When unplugged the laptop suddenly shuts down even tough the battery shows 29% still remaining.
I receive no notification from Windows or anything, it just shut downs like when the battery reaches 0%.
Then in order to start it again, I need to plug it in.
Is this a known issue ? I previously didn't have any battery problems and running the HP Assistant informs me that the battery is ok and it doesn't need replacemants.
Any idea how to fix this issue ? Basically the laptop is dead at 28%-29% battery life.
Thanks.
This question was solved.
View Solution.

Hello Mythul,
I have read your post on how your notebook is closing unexpectedly when you unplug your power cord, and I would be happy to guide you towards a resolution!
I am sorry, but to get your issue more exposure, I would suggest posting it in the commercial forums, since this is a commercial product. You can do this at:
http://h30499.www3.hp.com/t5/Notebook-HP-ProBook-EliteBook/bd-p/bsc-274
I hope this helps!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

HP probook 4540s - display upgrade to 1920x1080

Similar Messages

Maybe you are looking for