HP Probook 4540s no sound from Headphones or external speakers

Hi everyone,
I bought a HP Probook 4540s-Intel i5-3210 2.50 GHz, 6BG RAM, AMD Radeon HD 7650M 2GB DDR3 and an internal Intel HD Graphics 4000.Currently using Windows 7 Ultimate 32bit.The problem is that I installed the sound drivers from the HP site (IDT High-Definition aoudio CODEC) but the sound is only comming from the laptop speakers.Nothing happens when I plug in  headphones or external speakers.Please help me because I have to use at least my headphones at work.

Hi,
Please right click the speaker icon (bottom right corner), select Playback devices and enable the Headphones.
Hope this helps.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

  • No sound from internal or external speakers

    Imac 27" mid-2011 running Maverics 10.9.3  I'm not getting any sound from internal or ext. speakers.  I can hear the startup sound when booting up.
    System Preferences->Sound only shows Digital Out for OUTPUT and Output Volume is maxed and can't be adjusted.  Mute is NOT checked.
    I've done an SMC and PRAM reset with no change.  I've tried multiple times plugging and unplugging the external speaker cable jack.
    Any suggestions would be most welcome.

    Hey krawfo,
    Thanks for using Apple Support Communities.
    Looks like you are not getting sound from your speakers. I see you have tried different things to try and resolve this. This article is a good resource for this issue.
    Troubleshooting issues with no audio from built-in speakers on Macs
    http://support.apple.com/kb/ts1574
    Check to see if a red light is lit in the line-out port. If so, your Apple computer may need service.
    Have a nice day,
    Mario

  • No sound without headphones or external speakers

    as the subject implies
    no sound anywhere on anything without headphones or speakers - DVD's, itunes, computer sounds etc. etc. etc.
    Surely this is not normal? (this is a brand new machine)
    I have checked all the obvious (or seemingly obvious) things - mute is off - volume is turned up in system preferences etc. etc.
    Any thoughts appreciated.

    I've had this happen when I was doing a lot of switching between my iMic and other sound port in's and out's between various editing apps - a Pram reset restored things to normal for me.
    Macbook 1.8-)   Mac OS X (10.4.8)   Week 38 base model w/1G Ram

  • No Sound From Headphone Jack, Only Internal Speakers working in Macbook Pro A1278

    Hello, the internal speakers of Macbook Pro A1278 OSX 10.7.5 are working perfectly, but no sound from headphones or external speakers when plugged in. Headphones/speakers recognized when plugged in, shown by System Preferences/Sound, and since the sound stops from internal speakers when headphones/speakers are plugged in. No red light seen coming from headphone jack, as I read in other posts. The problem began after a cable was connected between computer and stereo system. Maybe overloaded the sound card and burned out a connection? Wondering if you think that the sound card needs to be replaced or is there another solution possible? Thank you.

    Hello JohnBoarkman,
    Welcome to the Apple Support Communities!
    I understand that you hear no sound from your accessory when you connect to your headphone jack. My first troubleshooting suggestion for this situation would be resetting the NVRAM on your Mac. Please use the instructions in the attached article to complete this process and let me know if the issue continues. 
    How to Reset NVRAM on your Mac - Apple Support
    Have a great day,
    Joe

  • Low and unclear sound from headphone HP Pavilion G6 2228tu

    laptop hp pavillion g6 2228TU  OS windows 8 pro 64 bit
    every thing was working fine.. but from last 2-3 days i faced a problem of low and cracking sound from headphone ..
    laptop speraker are working fine .. but when I connect headphone to audio port .. sounds comes out to be very low and unclear.
    I tried headphone with my desktop and mobile but it was working fine.
    I called HP custmor support.. they gave a link of sound driver.. i updated sound driver but no solution comes out..

    Hello Deepak-Kumar,
    You’re having a problem with the sound not be very loud.
    Go to device manager and uninstall the IDT audio.
    Do not restart the computer.
    Now install the updated sound driver.
    Since it has not been to long since the problem started, you can run a system restore.
    This will take the system back to when everything was working correctly without affecting your personal files.
    Here is a link on how to do a restore.
    Let me know how everything goes.
    Have a good day.

  • No sound from headphone port in 15" macbook pro mid 2012

    Hi everyone,
    I'm having a problem.  I didn't use my headphone port for a long time and then when I did I used a non-Apple headphone and when I got no sound I thought it because it was b/c of this.  So when I used an Apple headphone recently I found I had the same problem.  I am wondering if there is a fix out there or if it is something inherent and I need to get it repaired.  I get sound from the built in speakers just not from the headphone jack.  Much thanks in advance for any advice.

    Try a PRAM reset:
    http://support.apple.com/kb/ht1379
    Ciao.

  • I only get sound from the computer's speakers even though I put in headphones

    I have for a while now had the problem that I only get sound from the computer's speakers even though i plug in the headphones, I have rebooted the computer but still the same problem occurs. So i thought there might be someting wrong in the settings, when i open the soundsettings and plug in my headphones nothing happens, usually I believe there should be a text appearing that says that the sound is now going to headphones, am I right? any how, it still just sends the sound out to the speakers and there is no option to send it else where then "soundflower 2ch and soundflower 16ch".
    I do have an external sound card, for music recording, that goes through USB, and when i plug that in i get the option to send the sound to that device and also to recive sound and i can also choose if i want to sent it to the computer's speakers. So could it be someting wrong with the headphone jack?

    Good day!
    Thank you for writing to the Dell Community Forum.
    Boot into the System Bios and make sure that Onboard Devices- Integrated Audio is On. Then exit the System Bios saving the change. Once back into Windows, open the Device Manager and make sure that ADI1983 HDA appears under Sound devices. Then re-test the rear green audio jack #4 using headphones. Also, reply to this post with the service tag of the system sent via private message so that I can look into the details of the system and assist you better.
    Have a great day ahead.

  • VFL Speaker sound from both the front speakers while FR sound is not coming out at all.

    I have a creative gigaworks s750 connected to a xtreme gamer sound card. The system was working absolutely fine but now it has started behaving very strangely; system is playing back Front Left Speaker sound from both the front speakers while Front Right sound is not coming out at all. If i click the front right speaker in audio console speaker setup wizard, no sound comes. However when i click the front left speaker, sound comes out of both speakers. I counter checked it with playing 5.1 dts movie and muting all the speakers except the front left one from ac3 filter, sound came out of both the front speakers. However when i muted all the channel except the front right, no sound was coming out of front right speaker.
    Message Edited by hussain on 06-10-2009 10:26 PM

    Just want to add another relieved reader of this thread.  I had lost the sound to my speakers even though I had sound to headphones. I was convinced it was a damaged headphone jack because I had pushed the headphone plug in harder the last evening when my wife complained that she could still hear the speakers while I listened with the headphones.  The next morning--no speaker sound.
    I spent a few hours searching the web to see how to disassemble a satellite A505 and get to the jack.  But I wasn't even sure I could get a proper replacement jack that fit, and I was concerned that small damage, say to the ribbon connectors could render the computer useless--a large price to pay for just missing audio.  
    Fortunately, I stumbled onto this thread and I recalled I had put the unit to sleep the night before--something I don't usually do, but I didn't want all the Chrome web sites to have to reload so I just put it to sleep.
    When I put it to sleep again and fired it up--Sound!  I am so glad to find this solution so I just want to let people know it remains a viable option.
    Doug

  • HT201401 I can't hear any sounds from my iPhone 4s speakers

    I can't hear any sounds from my iPhone 4s speakers.
    I have checked my side button and checked my sound settings all seams to be fine
    I have also tried switching off and on still not working
    I have also reset my all settings but still can't Hear any sound from my speakers
    All app and music sounds are also not working
    please help

    Have you "reset" the device?  http://support.apple.com/kb/HT1430..I'd also stop all of the apps with the double-tap-on-the-home-button method. 

  • Switching from headphones to external speaker

    Is there a way to switch from headphones to external speaker without having to unplug and replug the devices? Something practical and fast?

    Perhaps something like this?

  • How can I send sound from microphone to Bluetooth speakers?

    How can I send sound from microphone to Bluetooth speakers? They work from the music app but not from an internal or external microphone.  Is this a setup issue or is there a work around?

    I don't know of any way to do that.

  • No sound from rear 5.1 speakers plz h

    hi all,
    i have a audgity 2 zs card and i have 5. speakers, im not reciving any sound from the 2 rear speakers, i've tryed downloading the lastest drivers, checked all the wirering everything is in its rightful place but why am i getting no sound? i know the speakers work coz i've swaped where there pluged in and thay play no problem.. i've looked at the back of the pc and you have the 3 coloured holes where the clour coded wires go in all it seem that u dont get any sound form the black hole.. is the card fautly? this is really winding me up, i just cant figger it out! plz help me.. woman in distress!!LOL
    thanks,
    legacylady

    Catherina-CL wrote:
    I (hopefully) clarified some of this in the other thread, but this is not the way it works. Read the other thread for a more detailed rundown.
    When you're playing anything that isn't a true Dolby Digital 5. source (with an encoded AC3 stream), like a game or music, you will only get stereo over a digital connection. That is normal, that is not a bug or a mistake, but that is normal. No coaxial wire is capable of passing over a 5. signal that isn't an encoded AC3 stream. If you're playing a DVD, that will work, as it's an encoded AC3 stream, but as I mentioned the card and DVD software have to be set to bypass the signal, to the encoded AC3 stream goes over the cable untouched, and your external decoder can process the signal.
    Cat
    Message Edited by Catherina-CL on <SPAN class=date_text>0-7-2006 <SPAN class=time_text>09:2 AM
    Yes I know all that.But even if it's not a AC3 signal, like when you play a stereo MP3 file, shouldn't the Dolby Digital led on th external decoder be on anyways? Since it does transfer from a Digital out to a Digital in. I say this, because when using my internal Dolby Digital feature (nVidia Soundstorm) from the coaxial SPDIF out to the Inspire 5500's coaxial digital in, the Dolby Digital led is always on. I know it's no real 5. DD, but it is a digital signal, so it detects it and triggers the led.So I expect this to be the case with the Audigy 2 SZ too.

  • HT1665 how come i cant use other headphones or external speakers with my ipod

    how come i cant use headphones or external speakers with my ipod.sood as you plug either in there is no sound.

    - Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
    Try the following to rule out a software problem
    - Check also Settings > General > Accessibility > Hearing. Make sure that the sound balance is not set all the way to "R".
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iPod.
    - Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
    Apple Retail Store - Genius Bar
    Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
    Apple - iPod Repair price                  
    A third-party place like the following will replace the jack for less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    Replace the jack yourself
    iPod Touch Repair – iFixit

  • Cannot get internal speakers to work. Only works with headphones or external speakers?????

    All of a sudden my MacBook Pro internal speakers are not working. The status bar at the top of the screen shows everything bold and in black print but now the speaker volume symbol shows just the gray color and will not allow me to adjust the volume. However, when I plug in headphones or external speakers the symbol becomes bold and black the way it should and everything works just fine??? How do I correct this?

    Go step by step and test.
    1.Plug in and  remove the headphone.
        If you see red light in the headphone port, plug the headphone
        in and out of the port 5 or 6 times to flip the microswitch inside.
        Sound output may be stuck in the digital mode.
    2. Reset PRAM.  http://support.apple.com/kb/PH14222
        Do this twice
    3. Reset SMC.     http://support.apple.com/kb/HT3964
        Choose the method for:     "Resetting SMC on portables with a battery you should not remove on your own".
    Best.

  • Morese Code sound coming through my external speakers

    Recently I've been getting Morse Code sounds coming through my external speakers. It's not all the time but at least 2-3 time a day. Any idea?

    If I have my cel phone near my iMac, every now and then I get a sound that could be described as Morse code like. It has no lasting effects, so I don't worry much about it.

Maybe you are looking for

  • Can I update 2(or multiple) columns in a table based on one of update col?

    Hi All, I have a table emp: empno number ,salary number ,comm number Now, the comm column is always a % of the salary column (but still would like to store the comm in the table as a column). Assuming that someone get a salary increment and I need to

  • Value key field in XML for JDBC scenario

    Hi All, I am working on RFC to JDBC scenario. I have one table in Oracle DB (like mara in sap). I wants to read whole data through JDBC adapter. I am doing following mapping: '1'         -  SELECT 'SELECT'    -  @action access <tablename> -  table ''

  • When I export to epub, I get 2 TOCs

    I'm putting together my first epub, and I'm following along a video on Lynda.com to do it (the video title is "InDesign CS5.5 to EPUB, Kindle, and iPad" by Anne-Marie Concepcion, although I am using ID CS6). It was going fine until the table of conte

  • Content Holders - Limit?

    I do not remember, is there a limit to the number of content holders that can be used on a page? Thanks!

  • Unable to save blobs on OAS 9.0.4

    Production system (Solaris): Database: 10.2.0.2 OAS: 9.0.4.1 Test system (Windows 2003) DB 10.2.0.2 OAS 10.1.2.0.2 Our java application saves xml-files to blob-columns in the database. Here a code snippet: String sql = "INSERT INTO xml_table (xml_con