Hp probook 4540s support sata 3

Hello.
I want to buy HP ProBook 4540s and I will replace its HDD with a Sata III SSD. So my question is hp probook 4540s support sata 3 оr no?
thanks in advance
This question was solved.
View Solution.

It  work. nice HP
this is my ssd speed test 
My set up 

Similar Messages

  • HP Probook 4540s Supports Seagate ST500LT012 mini HDD

    Hi,
    I would like to know if HP Probook 4540s supports mini(7mm) HDD. Recently I bought a seagate ST500LT012 HDD on an online portal and later found that this is a mini HDD and all laptops may not support mini HDDs.
    Thanks in advance...
    This question was solved.
    View Solution.

    Hi:
    It should.
    It will just be thinner than a 9.5mm drive, but the caddy should work and the screw holes in the caddy should line up with the screw holes in the drive.

  • ProBook 6465b - does it support SATA III?

    Hi,
    I have ProBook with A6-3410MX on AMD A60M FCH, which should has only 6Gbps SATA. But my friend has the same ProBook with A4 on the same chipset, and he's bought Crucial m4 SSD and benchmarks results show that it is only SATA II (3Gbps). Can anybody confirm that 6465b support or not 6Gbps SATA?

    zaanton wrote:
    Hi pepe,
    that's the point - it should support but results from AS SSD on my friend's 6465b shows that it not support SATA III. And I try to discover why. Is it hardware (HP do not include SATA III) or some software problems. Unfortunatelly, i don't have any SATA III SSD or HDD to check my notebook.
    http://www.anandtech.com/show/4253/the-crucial-m4-micron-c400-ssd-review
    Have a look at the write speed. My SATA II Corsair has the same write speed like the SATA III M4 256GB and 512GB. Reading is just 415MB/s (my has approx 275MB/s) for all of them. I would expect a better read/write performance from a SATA III SSD..
    Dv6-7000 /Full HD/Core i5-3360M/GF 650M/Corsair 8GB/Intel 7260AC/Samsung Pro 256GB
    Testing - HP 15-p000
    HP Touchpad provided by HP
    Currently on Debian Wheeze
    *Please, help other users with the same issue by marking your solved topics as "Accept as Solution"*

  • ProBook 4540s - Maximum Supported Memory ?

    I will buy a ProBook 4540s (Intel i5) very soon.
    At a lot of places on the Internet, it had been mentioned that it supports upto 8GB DDR3 RAM. But, on a details page at HP site, it had been mentioned as "16GB". So, I'm a bit confused here, though I guess that it might be 8GB. I want to know about this for sure.
    Thanks
    This question was solved.
    View Solution.

    Hi
    Please find the link given below might help you. Unit support 16GB Memory it has 2 slots Each slot can hold 8GB stick.
    HP ProBook 4540s Notebook PC - specifications
    Let us know how it goes!
    "I work for HP."
    ****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    Regards
    Manjunath

  • Processor hangs after adding more RAM to probook 4540s

    hey ALL
    recently i upgraded my laptop hp probook 4540s to 16 GB RAM
    I am having two identical (Same part numbers) RAM sticks of following specs:
    manufaturer:   TRANSCEND
    Memory         :   8 GB (each)
    Frequecy       :   1600 MHz
    Type               :    DDR3
    PC3                 :    12800
    the issue is the lowness of processor. Processor utilization meter shows 70 to 80 % utilization with these two sticks running. 
    If i install only single module of 8 GB then the System runs great. i have checked both modules individualy by installing each of them in single channel configuration. also i changed the slots in single channel configuration. in single channel configuration everything runs great.
    the complete specs of my system are :- 
    Specifications
    do anyone have any idea of what is going on
    i shall be very thankfull to everyone for helping me on this 

    Hi,
    According to the Maintenence & Service guide for your notebook  a maximum of 8GB is supported in your notebook.
    The modules supported are PC3-10600, 1333-MHz, DDR3. They are not PC3 12800 modules like the ones you have installed.
    That would seem to explain the issue you are having.
    Best regards,
    erico. 
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • HP Probook 4540s upgrading RAM

    Hi,
    I would like to upgrade my memory (4GBs are not enough in theese days) for probook 4540s
    Now, I have 1 module with theese specifications:
    CPU-Z:
    DIMM #                1
        SMBus address        0x52
        Memory type        DDR3
        Module format        SO-DIMM
        Manufacturer (ID)    Hyundai Electronics (AD000000000000000000)
        Size            4096 MBytes
        Max bandwidth        PC3-12800 (800 MHz)
        Part number        HMT351S6CFR8C-PB  
        Serial number         (Personal information removed)
        Manufacturing date    Week 38/Year 12
        Number of banks        8
        Nominal Voltage        1.50 Volts
    Question is:
    Can I add newer model to the second slot?
    I want to buy:
    HP SO-DIMM 4GB DDR3 1600 MHz Unbuffered
    Certificated for PC3-12800 (B4U39AA)
    It seems, the new model of ram module should be compatible with my notebook, but will be compatible with my old module, while working on 2x higher frequency?
    Or I have to buy 2 new modules and  replace the old too?
    Or I missed something and it is not compatible in any way?
    Also, I have red at other forums, that upgrading memory up to supported 16GB takes some performance issues. Is it still ture, or is this already fixed?
    Thanks for answer

    Hi ,
    The model supports the following specification of memory.
    Standard
    DDR3 PC3-10600 SDRAM (1333 MHz)
    Two SODIMM slots supporting dual-channel memory.
    2GB and 4GB SODIMMs
    Maximum
    Upgradeable to 8192MB with optional 4096MB SODIMMs in slots 1 and 2.
    Dual-channel
    Maximized dual-channel performance requires SODIMMs of the same size and speed in both memory slots.
    Please find the link
    http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c03349709&sp4ts.oid=5229455&lang=en&c...
    http://www8.hp.com/h20195/v2/getpdf.aspx/c04126959​.pdf?ver=4
    I'm an HP Employee.
    The opinions expressed here are my personal opinions, not of HP.
    Make it easier for other people to find solutions, by marking an answer “Accept as Solution” if it solves your problem.

  • Probook 4540s HHD randomly gets very slow

    Hey, I have hp probook 4540s running windows 7 ultimate 64bit.
    Problem is HDD sometimes (after startup) being very slow, transfer speeds according to resource monitor are ~200kb/s, windows startup takes around 30minutes. HDD transfer speeds do not get better no much how long u wait.Cpu and memory usages are regular (=low) while this happens.All diagnostic programs (hp ones) do not find any issues.
    First I assumed it being a virus or windows problem so I formatted HDD and re-installed win7, a few days went by and it happened again. Computer has latest bios, and drivers, except update sp59047.exe which should be firmware for hdd this computer has. Running this sp59047 opens window which says hdd is correct for this update.. then it restarts computer which ends up in ms-dos looking command prompt saying failure. This environment has autoexec.bat and auto2.bat which both return 'failure' while i try to run them.
    HDD itself cant be seen but it has sticker 'replace with hp spare 641672-001 and 8k12a0. I'd expect software issue but this is fresh windows 7 with only regular stuff (firefox, adobe flash, .Net, directx, teamviewer, and kaspersky antivirus).. when problem first time appeared this computer didn't have any antivirus, so likely kaspersky isn't causing it. So, ideas what might be the problem? Lack of that firmware update? HDD about to fail? Computer still has warranty for 2 weeks, but I hate dealing with dealers when problem is something like this which passes build in-tests and happens randomly. Haven't tried with HP yet thou.

    I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this <HERE>
    HP ProBook 4540s Notebook PC Support Page
    TwoPointOh
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • SSD for Probook 4540s

    do probook 4540s with windows 7 ultimate 64-bit support SSD storage, and if it support, will it replace my HDD or my optical drive ?

    Hi,
    Normally we replace the HDD with SSD, you can use the ODD but you need more hardware for it. Replacing HDD with a SDD is very simple interms of hardware but recover software may take a bit longer. The following shows how in general which can apply to many other machines.
       http://www.pcworld.com/article/192930/how_to_upgra​de_your_laptop_hard_drive_to_an_ssd.html
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • HP Probook 4540s Sudden Shutdown Without any Warning

    I have a HP Probook 4540s laptop bought in November 2012. It has Core i5-3210M CPU @ 2.50 Ghz chip with 8 gb ram and 500 GB hard disk. Till 2014 it was all OK. But now it has started giving me problems like it shut downs when it is at low battery say just about to reach 10 %. No low battery message just complete shut down(bam, screen goes dark). Now I have done the following steps
    1. Battery has been calibrated it did solve the problem but it again started to happen.
    2. I got my laptop's fan replaced 28 days back on i guess Jan 5, 2015 and vents are clean
    3. I use Hardware Monitor Software to monitor the temperature and the results are as follows :
              >> During Normal Operations it remains between 50 to 55 C (is it Normal ?) What should be the ideal temperature ?
              >> Hard Disk temp is 60 to 64 C.
    4. I use battery saver mode and everything set to normal
    5. Drivers and BIOS Updated
    6. Used HP Support Assistant to check battery health it shows OK.
    7. I have changed the values also like I set the critical level,low battery and reserve battery but i guess that also not working.
    Now My Question is 
    1. Is it due to overheating ? During normal operations like when plugged in it doesn't shutdown. Works Perfectly.
    2. Or the battery is giving me trouble and needs to be replaced. After 100% charge it gives me around say 1 hr 30 mins of use but when it is about to hit  11 or 10% the system shuts down. 
    Please provide me with a solution
    P.S. I don't use my laptop for gaming

    Deep.
    Download and run BatteryMon.
    http://download.cnet.com/BatteryMon/3000-2094_4-29244.html
    After download click on start.
    In the upper left hand corner you will see a battery tab click on it to get the details of the battery.
    Look at Design Capacity,  Full Charge Capacity and Current Capacity.
    Let us know what you find.
    REO
    HP Expert Tester "Now testing HP Pavilion 15t i3-4030U Win8.1, 6GB RAM and 750GB HDD"
    Loaner Program”HP Split 13 x2 13r010dx i3-4012Y Win8.1, 4GB RAM and 500GB Hybrid HDD”
    Microsoft Registered Refurbisher
    Registered Microsoft Partner
    Apple Certified Macintosh Technician Certification in progress.

  • HP Probook 4540s: Fingerprint Scanner Not Working

    Hi,
    Problem: Fingerprint Scanner - Windows log in does not give option to log in via fingerprint scanner. 
    Overview: After installing fingerprint drivers from the HP site and using the HP Protect Tools to successfully enroll fingerprint, I tried logging in via this method but the windows log in screen does not display this option. Device manager correctly identifies and shows the fingerprint sensor - however, the control panel says no biometric devices detected.
    I really need help in sorting out this issue. Details of what steps I took trying to make the scanner work are given below. 
    Specs: 
    1) Probook 4540s
    2) Windows 7 64-bit
    3) i5-3210m, 1Gb Hd 7650m, 4 Gb 1333Mhz, 750Gb 5400rpm, VFS 491 Fingerprint scanner.
    Details of the problem and steps I took to install drivers:
    After a fresh installation of Windows 7, I went to the HP driver site to download the latest drivers for Probook 4540s:
    http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=5229457&...
    I installed the drivers in roughly this order:
    1)realtek ethernet controller drivers,
    2)audio drivers,
    3) the chipset and USB 3.0 drivers (but not the Intel MEI driver)
    4) Intel video driver: faced an issue such that drivers were not being allowed to install. After disabling switchable graphics in the bios, I was able to get these drivers to install.
    5) AMD video drivers: installed after the intel HD graphics driver - installed but Catalyst Control Center was not being displayed. So I re-enabled switchable graphics in BIOS, re-installed these drivers and CCC was now available.
    6) HP hotkey support
    7) HP universal camera driver
    8) Validity Fingerprint sensor
    9) Synaptics Touchpad driver
    10) Atheros wifi & bluetooth
    11) Jmicron card reader
    After driver installation, I installed the HP Protect Tools. After prompting for a PC reboot - which I did - it asked for setup of security etc.. Part of this pocess was the enrolling of my fingerprints - successful. However, upon log off/ restart of windows, an option to log in with the fingerprint scanner did not appear in the Windows log in screen.
    I opened the Control Panel, and found there was no biometric devices tab, even though device manager showed biometric device and validity sensor (VFS 491). I then proceeded to uninstall HP protect tools and the validity driver for the fingerprint sensor, then made sure these services were running:
    -Credential Manager
    -Remote Procedure Call (RPC)
    -DCOM Server Process Launcher
    -RPC Endpoint Mapper
    -Windows Biometric Service
    -Plug and Play
    Then as suggested in another forum post, I first installed this :http://ftp.hp.com/pub/softpaq/sp55001-55500/sp55109.exe and then the validity drivers from 4540s drivers page, and then HP Protect Tools.
    After reboot HP Protect Tools as before would enroll my fingerprints, but again no prompt at windows login came to log in with fingerprint. However, one change after the installtion of http://ftp.hp.com/pub/softpaq/sp55001-55500/sp55109.exe was that in control panel there is now a tab for biometric devices; however, it says that windows did not find any biometric devices installed. An image is attached showing both the device manager and the control panel!
    Please HP provide a solution. Thanks!
    This question was solved.
    View Solution.

    Ok problem solved. I dont know whether it is related to the installation of HP windows 7 Essential System Updates and Intel MEI driver or not - but I did install these.
    What really worked without doubt was this - > install both the fingerprint drivers and then the HP Protect Tools. Once rebooted, open HP Protect tools, then go to administration in the bottom right corner -> Administrative Console ->Increase System security -> tick windows login security and your done. Now you will be able to log in via enrolled fingerprints.

  • Drivers for ProBook 4540s (Microsoft Windows Ultimate)

    As we can see at this HP page for ProBook 4540s drivers, it has not been offered drivers for both 32-bit & 64-bit versions of Microsoft Windows 7 Ultimate. I want to know whether drivers for those versions are available at anywhere &/or is it OK if I install drivers for an available version (Such as Windows Professional 64-bit version) in Windows 7 Ultimate. Will they be fully compatiable with the ultimate versions?. & anything I should know related to this matter would be great. I'm specially concern about "Windows 7 Ultimate - 64-bit" version, as I'm planning to install it on my new ProBook 4540s - i5, which I will buy very soon. Thanks

    Hi ,
    Thank you for visiting our English HP Support Forum. We are only able to reply to posts written in English. To insure a quick response it would be advisable to post your question in English. The following links are here to assist you if you prefer to post in the following Language Forum.
    English:                                 http://h30434.www3.hp.com
    Spanish:                               http://h30467.www3.hp.com
    French:                                 http://h30478.www3.hp.com
    Portuguese:                       http://h30487.www3.hp.com
    German:                              http://h30492.www3.hp.com
    Korean:                                http://h30491.www3.hp.com/t5/community/communitypage
    Simplified Chinese:         http://h30471.www3.hp.com/t5/community/communitypage
     Thank you
    George

  • About adding extra graphics card in HP Probook 4540s Notebook Pc

    I have an HP Probook 4540s Notebook Pc laptop with i5 3230m processor (2.6 GHz) and Intel HD Graphics 4000. I use 4 GB RAM.
    I want to add Extra Internal Graphics Card (such as Nvidia).
    Can I do it?
    If yes, how? Please explain!
    This question was solved.
    View Solution.

    LOVE_DREAM wrote:
    Is there any other way to use a graphics card?
    Hi,
    It already has video chip (card). As mentioned above, no way you can add an external video card to your machine. Actually there is one way which requires the following steps:
    (a) Buy a new motherboard which supports external video card,
    (b) Buy a new video card,
    (c) Buy a new cooling system,
    (d) You may need new power supply (charger)
    And at the end of the day your machine may NOT work as you dream and the total cost would be more than the price of a new, better computer.
    Hope this explains a bit more.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • HP ProBook 4540s missing unknown device

    This is my 3rd day since i bought this new HP probook 4540s [Product No. B9A39PA#UUF] and i like it, i made a clean install for windows 7 ultimate x64 and i've just realised that the hp drivers support page dose not has any drivers for the ultimate version, so i downloaded the proffesional drivers, now i have all devices are installed except  two devices named unknown device, please help me. The hardware Ids: 1- unknown device USB\VID_138A&PID_003D&REV_0104
    USB\VID_138A&PID_003D 2- unknown device ACPI\HPQ6000
    *HPQ6000

    Hi, Can you post back with the following details. 1.  The full Model No. and Product No. of the notebook - see Here for a guide on locating this information. 2.  The full version of the operating system you are using ( ie Windows 7 64bit ). 3.  R

  • HP probook 4540s - display upgrade to 1920x1080

    I have a probook 4540s. Can i upgrade display panel from basic 1366x768 to HD panel 1920x1080?
    Is the motherboard of this model support panel bigger then 1366х768 resolution?

    Hello dsconnell,
    Your ProBook is a Business model.  Your issue would be best answered on the HP Enterprise Business Community Forum
    Good luck!
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • Keyboard for HP ProBook 4540s

    Hi,
    I will buy a HP ProBook 4540s with swiss keyboard.
    But, this Laptop it's a present for my sister in serbia.
    She need a laptop with a serbian (kyril) Keyboard.
    my question: has HP serbian keyboard for laptop HP ProBook 4540s?
    Thx
    Mik

    For the detailed service guide, refer the following weblink:
    http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c03332165/c03332165.pdf
    Refer to the page 32 that has the list of compatible keyboard layout part numbers. However, I would suggest you just change the keyboard layout in Windows to Serbian and start using it. You may need to use stickers to change the layout accordingly.
    I am an HP employee.
    Regards,
    Vidya
    Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
    ***Click on "Thumbs up" button to the bottom right side of my post to say thanks!***

Maybe you are looking for