HP ProBook 5220m Fan not working with battery power but work fine with adapter plugged in

Hi,
Any one have this issue?
HP ProBook 5220m (Bios Version F50) Fan not working with battery power but work fine with adapter plugged in.
This issue was found in my replacement motherboard. the original mother do not have this issue.
The origianl mother to be replace is due to can't power on after a power failure recovery. I believe was due to power surge killed the motherboard's power controller circuitry.
Appreciate any one can provide clue for resolving the problem.
I have tried to install speedfan to try my luck, but it can't any fan in the application to configure. (Bios Version F50)

@wheng
‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with the Forum's private messaging please click here to learn more.
Thank you,
Omar
I Work for HP

Similar Messages

IBook G3 800 GHz will work on battery power but will not turn on with AC pl

This iBook will function with a battery, but when the AC is plugged in it does nothing. It will not turn on. Is this a logic board problem or maybe a short or something not connected inside for the AC plug?

It's a rather complicated repair:
http://www.ifixit.com/Guide/Repair/iBook-G3-12-Inch-DC-In-Board/134/1
Apple doesn't consider it a do-it-yourself job.
Expect to pay $115-$145 for the repair (plus shipping if you have to send it away). The iBook may not be worth the repair, so some people are trying to do it themselves.

Zen Micro not recognized on one PC but is fine with 2 oth

Before I get totally frustrated with my PC, not the new Zen Micro 6g, what could I be overlooking to get the software and the PC to recognize this unit's This PC has Windows XP (no service packs installed), and after restoring system and reinstalling the software, I have the same problem: I connect the Zen to the USB cable, it says "Found New Hardware" and then proceeds to want to reinstall the software and drivers again from the CD. Naturally, it should have picked up the installed software and drivers but it hasn't.
On my other 2 PCs, one with Win XP sp2 and the other, my Toshiba laptop with Windows Media Player 2005 Edition, no problems at all. Immediately recognized the player after installation of the software and drivers.
I am almost at the point of not bothering to install it on the last PC as it works on 2 out of 3 fine but I would like to find out what could possibly be the problem. The two towers are identically set up: same Intel865Perl mbs, same hardware - only difference is the OS.
I have unistalled and reinstalled, system restored a few times, and I give up.
Any ideas are appreciated.

Thanks everyone. Oh, boy, I have a lot to search out, huh? Well, the chipsets are the same. The OS's are different though. I tried the USB from the mb....nothing. I do have an add-in card from Adaptec which is a dual connect card....contains 3 USB ports and 2 firewire ports. Nice card, usually works fine. All my other USB devices such as Canon camera, Sony camera, all work fine from both places. But, it might not like the Zen. Not sure why Zen wouldn't be compatible with an Adaptec USB card but I do know that Windows XP with no service packs does NOT recognize 2.0. just .. And I do get a message that states that I am connect a high-speed device with a non-high speed USB port. If that's the problem, why does it say "Found New Hardware" in the first place? And it does show up in Device Manager when connected, but with the yellow markings. It's listed under "Other Devices", and if I remove it, reboot and reconnect, the same message comes up asking me to install the drivers again.
I could upgrade this PC but I don't think that is going to make any difference, except that it will recognize the 2.0 USB ports.
I'm going to keep trying until I get it right. Any other ideas short of giving up?

HT3964 macbook pro will not start on battery power works fine when plugged in

My macbook pro 15 inch early 2008 model will not start on battery power but works fine when plugged in.

check the battery info.. >about this mac>more info>system report and select "power" on the lefthand column. How many cycles? What does it say about the condition? etc.

My new macbook pro 13" just died and i can not turn it on. When i connect the power cort it also does nor charge. No light is commong on. I was working on battery power when it died and the battery was fully charged. What is the problem?

My new macbook pro 13" just died and i can not turn it on. When i connect the power cort it also does nor charge. No light is commong on. I was working on battery power when it died and the battery was fully charged. What is the problem?

Take it back to the Apple Store for repair since it's still in warranty.

Google drive does not work with specific group but works with all users group!!

Hi,
Why Google drive does not work with specific group but works with all users group?
My rule : Internal > external > all users = works fine
But
Internal > external > A group = not working !!

Hi,
if you require user authentication in Firewall policy rules, the clients must bei Webproxy clients (for HTTP / HTTPS) or TMG clients (for TCP/UDP):
http://technet.microsoft.com/en-us/library/bb794762.aspx
regards Marc Grote aka Jens Baier - www.it-training-grote.de - www.forefront-tmg.de - www.galileocomputing.de/3276?GPP=MarcGrote

My iphone5 wont charge with usb port but works fine with wall plug... Infact computer. Doesn't recognizes the iphone

Battery not charging with usb port but works fine with wall plug.. So the prob is computer is not detecting the iphone5 . This problem started after upgrading to 6.1.3 version

Try to see what happens on another computer. If it works on another computer, the issue is not at the iPhone.

T61 constantly freezing when plugged in, works on battery power

Hi,
Recently I had my hard drive replaced at an authorized ThinkPad computer center. Things have been working fine for over a month. Recently, I have had the same problem with my laptop. When it is running on battery power, everything works smoothly. Once I plug it in to charge, everything locks up and freezes within 10 seconds without fail. This occurs every time. Even if I put my T61 to sleep or hibernate it, and then start charging, it will not work. I am forced to unplug it and take out the battery and try again. If I start with the computer off but plugged in and boot up Vista, it will either not start up or freeze once I log-in.
Thank you for help in advance.

Hello collegeuser, welcome here!
Please check this thread out. There should be a solution to your problem.
Follow @LenovoForums on Twitter! Try the forum search, before first posting: Forum Search Option
Please insert your type, model (not S/N) number and used OS in your posts.
I´m a volunteer here using New X1 Carbon, ThinkPad Yoga, Yoga 11s, Yoga 13, T430s,T510, X220t, IdeaCentre B540.
TIP: If your computer runs satisfactorily now, it may not be necessary to update the system.
English Community Deutsche Community Comunidad en Español

[svn:fx-trunk] 13257: Fix for @inheritDoc not working on a setter, but works on a getter

Revision: 13257
Revision: 13257
Author:   [email protected]
Date:     2010-01-04 10:49:13 -0800 (Mon, 04 Jan 2010)
Log Message:
Fix for @inheritDoc not working on a setter, but works on a getter
QE notes: None.
Doc notes: None
Bugs: SDK-24727
Reviewed By: Paul
Tests run: checkintests
Is noteworthy for integration: No
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-24727
Modified Paths:
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/ClassTable.java

steabert wrote:
Hi,
I had a similar problem with my Dell Latitude E4310, and apparently also the E6410, E6510.
The solution for me was to add the following line to /etc/modprobe.d/modprobe.conf:
options snd-hda-intel model=dell-s14
I tried that, unfortunately it does not work with this chipset. I do get a different set of channels though but it still cannot record anything. Maybe this chipset is too "new" for alsa. The latest release dates back from the end of January. Support for it is explicitly stated in the changelog to 1.0.24 but perhaps the recording part of it slipped through the cracks. ALSA bug tracking system seems quite closed.

I have a new Airport Extreme that works well with my IMac but is intermittent with our Windows 7 PC. Any ideas?

I have a new Airport Extreme that works well with my IMac but is intermittent with our Windows 7 PC. Any ideas?

Thanks planb77. Your instructions worked but I had to do a little more than you stated. I did not realize that transferring files to a new computer was not enough. When the iPod synced I was told I needed to "authorize" my new computer to get my iTunes purchases to sync to the iPod. So after the initial sync, I ejected and disconnected the iPod, went into the iTunes store, set up "home sharing" and then authorized the new computer. When that was done I reconnected the iPod and was able to sync all my books and music. The only thing I couldn't do was rename the iPod as iTunes never asked me to. Is there a way to rename it after it has been set by iTunes as "owner's iPod"?

2011 MBP not dimming on battery power

My new Early 2011 MBP is set to slightly dim the display on battery power and it is not dimming on battery power unless i go in to the energy saver preference and uncheck and recheck it then it dims slightly.

Yes, the case is a heat-sink; Apple call them "notebooks" not "laptops" and warn against having them against your skin.
"Do not leave the bottom of your MacBook Pro in contact with your lap or any surface of your body for extended periods. Prolonged contact with your body could cause discomfort and potentially a burn"
MacBookPro_UsersGuide page 107
Actually, you don't want heat near the battery itself as that's not good for li-ion, that should feel relatively cool?

HT204187 Email account does not work on the Mac but works on my iPad and iPhone. The account information was added on the Mac. I keeps rejecting my password.

I have seral email accounts on my Mac. One does not work on the Mac but works on my iPad and iPhone. The account information was added on the Mac. I keeps rejecting my password.

You don't input the information in manually for iCloud mail. It is automatically set up for you when you sign into iCloud via System Preferences and choose the Mail checkbox. Sign out of iCloud or deselect Mail in iCloud preferences. Open Mail's preferences and choose accounts tab. If iCloud account still exists in the list, delete it. Sign back into iCloud or check the box for mail. The account will be auto created for you.

I just installed CC Lr 5.5 and it will not open on my laptop but works fine on my desktop.

I just installed CC Lr 5.5 and it will not open on my laptop, but works fine on my desktop.

Try this:
https://helpx.adobe.com/lightroom/kb/unable-launch-lightroom-55.html

Peep sounds when working from battery power

Hello
I bought a new HP DV6-1340 laptop
I hear some strange peep sound from the notebook hardware when its working from battery power.
When working from outlet power there is no peep sound from the hardware.
Maybe its because the battery is new or something there wrong ?
Thanks in advance for help

I solved it my self. It was OK (no buzz and fuzz) when it was plugged in (when the electicity line was down once and I was running on the UPS battery).....

Mac Book Pro will not start on Battery Power

Mac Book Pro will not start on Battery Power although battery at 98% need to connect charger. When started date and time incorrect, comes up as 1st Jan 2012.

What is the exact model of your MBP? The date change often is an indication of power loss to the MBP, such as disconnecting the battery.
If the SMC reset does not solve the situation, post this from your MBP:
Make certain that the power adapter is connected.
Ciao.

HP ProBook 5220m Fan not working with battery power but work fine with adapter plugged in

Similar Messages

Maybe you are looking for