HP Prodesk 400 G1 MT drivers

I was installed windows XP in my HP Prodesk 400 G1 MT
but I need the drivers for it ...........
can anyone tel me where can I find it (the importantly one is the ethernet controllers RLT)

Hi:
Intel did not develop XP drivers for the ethernet or the graphics.
There are none to be had.

Similar Messages

HP ProDesk 400 G1 SFF, Running Windows 8.1: How do I decrypt my harddrive...

HP ProDesk 400 G1 SFF, Running Windows 8.1: How do I decrypt my harddrive, which I accidentally encrypted? I have the thumbdrive with HP Encryption on it.

Hi,
Can you please provide more details on how you "accidentally" encrypted the HDD?
I have used encryption tech and found it requires some degree of thought to accomplish the goal.
Jaco
Errare humanum est.

Hyper-v on HP Prodesk 400 G1 SFF

Does Prodesk 400 G1 SFF support Hyper-V, if so where is the setting in the BIOS to enable? As it now it seems it does not support. ThanksAshra

Hi,
Can you please provide more details on how you "accidentally" encrypted the HDD?
I have used encryption tech and found it requires some degree of thought to accomplish the goal.
Jaco
Errare humanum est.

HP ProDesk 400 G1 Small Form Factor Business PC using vga and dvi at the same time.

Looking into purchase a HP ProDesk 400 G1 Small Form Factor Business PC which has a VGA and DVI-D ports on the integrated video card. Can you use both ports simultaniously. one screen connected to vga and a 2nd monitor connected to the DVI port?

Hi,
You might get better assistance on the HP Enterprise Business Forum.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

SCCM2012/MDT2013 - HP PRODESK 600 G1 - Nic Drivers

HI all
wondering if anyone out there can helpme, trying a SCCM/MDT deployment for a client, they have a Desktop HP ProDesk 600 G1 SFF and i cannot for the life of my get the damn Nic driver to work. i have downlaoded all the drivers i can find for this model and
none seem to work.
I have injected the WinPe 3/4/5 drivers available and all the drivers for windows 7/8
Nothing im tearing my hair out please help
Chris

It's quite possible that you now have too many drivers in your boot image. Save all the possible drivers to a USB drive and try again. This time, at a command prompt, use drvload.exe to load each driver in turn to establish if it works (ie you get an IP
address).
See here for correct use of drvload.exe
http://technet.microsoft.com/en-us/library/cc766390(v=ws.10).aspx
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

HP ProDesk 400 G1 - Cannot "see" wireless connections

I just purchased this machine; it's running Windows 7 Pro. It does not see or recognize any wireless networks, even though there are about a dozen in my immediate neighborhood, including the one in my house to which my other computers are connected.
I have opened the network and sharing center and run the troubleshooting routine, and the message I get suggests that I plug in an ethernet cable or use a dial-up connection since there are no wireless connections. I have tried everything I know to get this solved, butr have run out of ideas. I know it is not the network itself, as my other machines connect with no problems. Please help. (I should be under warranty, but for some reason my serial number is not recognized and so I can't get to the warranty center online.)

I've just been shopping for the same model HP and have discovered that the base model of this particular series does not include integrated wireless. It only ships with an ethernet port (RJ-45). Looking at the system configuration control console should allow you to see how the system is set up.
If you're not configured with wireless access hardware, you may need to order a wireless LAN card or use a USB wireless device in order to find the local networks. If you are configured with wireless and still can't connect, you'll need to consider a local tech or having the system returned for warranty service if it's still covered.

HP ProDesk 400 G1 MT

Hi we have a problem here at our company... We have these computers (listed in subject) and they're not working good with intel i3 4150 processors. Whenever you reset the computer it gets stuck, so you have to unplog the power cord and plug it back in for the computer to start again. We tried upgrading the bios but it had no effect. Intel i3 4130 works fine but this one has a problem. If someone at HP could help maybe. Hope i wrote this to the right forum. Thank you in advance

Did you try and perform any kind of driver updates? Try Softpaq Download Manager (www.hp.com/go/sdm) and see what it suggestes to update - only do h/w driver updates. Also, install the latest 'essential system updates' softpaq Also, if you have more than one of the models with the new i3 processor, are they all failing or just one?

MDT 2013 and HP Elite 8300 CMT don't work

Hi!
I've got a Problem with booting into PE 5.0 on HP 8300 CMT with MDT2013
I always get Boot error: 0xc000000e, Info: unexpected error
I have allready injected all drivers (storage, NIC, graphics) but it doesn't work.
Problem exists with Litetouch-Partition and even when booting from USB-Stick (which perfectly works on Prodesk 400)
Any clues?

It is not clear to me if you are getting this problem when booting up WinPE, or after the OS is placed on the local hard disk, and booting into
Are you booting into uEFI mode or CSM mode? Crack open your bdd.log file after booting into WInPE, and search for isuefi.
Additionally, did you modify the diskpartitioning layout for your task sequence? If so you may have not set things up right, create a new task sequence with the partition set to 100% (the default).
Keith Garner - Principal Consultant [owner] -
http://DeploymentLive.com

HP-Tools on Windows 7 Home Premium

I just bought a ProDesk 400 G1 running Windows 7 Home Premium 64-bit. I noticed that it had 4 "Primary" paritions pre-configured including the "E" drive as HP-Tools.
I need to install UniVerse 11.n on drive "E" to avoid a great deal of configuration issues, so I wanted to re-name the HP-tools drive to "H" at a minimum. I also would like to re-partition the drive, creating an extended partition and logicals under it. Will the HP-tools work if set as a logical partition?

NelsonG, welcome to the forum.
I believe that you will receive more responses to your question if you start a thread here. They are the members who know your computer best.
Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Is it possible to insert a PDF file into a PostScript file?

I am the developer of several DB/400 to PostScript drivers for a specialty packaging print company.
I would like to insert, size, and position, component files (graphics) that exist as PDF files without converting them to EPS files first.
Are there any PostScript commands/examples that demonstrate this ability, similar to pdfmark for inserting html and javascript actions into a PostScript stream?

Dov,
Yes, this would be an input component of our workflow.
Right now the conversions are handled manually, usually through the use of Illustrator, mostly because the incoming pdf's have not been uniform or included several graphic components that needed to be controlled separately, or were "sloppy". Recently however, a situation has developed where a 3rd party is providing discrete, uniform pdf files for multiple clients that we will need to input efficiently into our system.
What I envision after your response of the impossibility of wrapping a PDF inside a PostScript stream is as follows:
- Normally, 100's of pdf's arriving from the 3rd party would be dropped into a "hot" folder for batch processing.
- A client "key" would trigger the hot folder application to act on the pdf's, prepending the client key to each file name.
- Batch processing would then accomplish the pdf to eps conversion.
- The eps files would be scanned for indexing data such as color information and bounding box, and, if necessary, color remapping could be done here too.
- The eps files would then be moved to our eps library and the indexing data would be added to the eps library database.
The only thing we aren't doing right now is the automated prepending of the client "key" and the pdf to eps conversion. At least in the short term I plan to see about the viability of converting the pdf's to eps using a batch action in Illustrator. I know I can write the "key" prepending code, as well as the eps parsing/color editing code.
Thanks,
Marvin

M-Audio Profire/AKG mic... LOW volume! Power issues?

Hey guys, desperately need some help here. So I've got an M-Audio Profire 610 interface, using an AKG Perception 200 condenser mic. I am having issues with REALLY LOW VOLUME! And I'm pretty positive I have everything setup correctly. XLR to XLR mic cable(I threw out my old one and bought a brand new one, still didn't solve the problem). I've got phantom power on and the profire is connected via firewire 400. All drivers and software are up-to-date. Got the latest OSX, running all of this on a relatively new imac.
I have no idea why the AKG mic won't pick up sounds nearly as loud as it should. I have the gain up on the Profire up at 90% which is sufficient enough but the recordings are muffly and not as crisp as they used to be. Once upon a time I used this same mic with a Powerbook G4 and M-Audio Mobile Pre, and the mic worked AMAZINGLY in both Garageband and Logic Express, it picked up EVERYTHING and I never needed to put the gain on the Mobile Pre past 40%--it was a super sensitive mic. One day out of nowhere, however, the gain volume became ridiculously low and I had to max everything out on the Mobile Pre and Garageband/Logic, but it sounded like crap. No hiss and not too much distortion, just LOW volume. The mic was hardly used and I'm having a hard time believing the mic is the problem, just because I only used it a handful of times before the gain crapped out on me. The strong sensitivity came on and off a couple times after that, but the volume is now low all the time. The only other mic I've tried to use with the Profire is an SM57. It works, but really low gain. Guitars and keys have worked perfectly fine, no gain problems.
I thought the original problem back in the day was my Mobile Pre, so I bought the Profire. Now I'm still having the same problem with ultra low volume. My mic used to pick up sounds from another room or even cars driving outside my window, and now I have to sing RIGHT into it for anything to even be audible. What the **** happened to my crisp/loud sounds? Is it possible that I'm not getting enough power? Would running the Profire via firewire 800 help at all? I'm going crazy here, I have no idea why my mic totally blows now. I guess at this point it seems like the mic could be the problem, but I'm scared of buying a new condenser mic and having the SAME problem all over again.
What do you guys think? Power problems, the mic itself, wrong setup? All I want to do is pin point this thing, any help at all would seriously be appreciated!
Message was edited by: misspibbs

misspibbs wrote:
What do you guys think? Power problems, the mic itself, wrong setup? All I want to do is pin point this thing, any help at all would seriously be appreciated!
Since you've already swapped cables, I would guess it's either the mic or the interface. Since you've already swapped interfaces, logically I would guess it's the mic.
Can you bring the mic to a music store or some other place where you could plug it into another interface or mixing board and see if it also doesn't work there? That would clinch it.

BIOS update install will not complete

Hi,
My first post....
I have an HP ProDesk 400 G1 MT desktop PC running Windows 7-Pro 64-bit with SP1.
HP Support Assistant prompted me to download and install an important BIOS update (L02). My current version is 02.01 (22/9/2013)
However, having downloaded the update from HP Support Assistant, the install commenced but would not complete (the black "x" symbol next to "Installing" did not turn into a green "tick". There are no error messages.
Any help would be apreciated.
Thanks

Hi,
You might get better assistance on the HP Enterprise Business Forum since you have a business class PC.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Install AMD R9 380 on HP

Hi, sorry for my poor English I have a HP prodesk 400 G1 MT and i already installed a PSU 750 W I would like to install a Graphic Card AMD R9 380 Nitro, Can i run this card??? Thanks an please Help Me

Hi, There is very little information about the compatibilty of the AMD R9 380 and HP ProDesk 400 G1. You have a fairly new PC so there is a good chance that the AMD R9 380 will work. Know what the return policy is before you buy.

Solaris 10 won't boot up "Cannot load drivers for /pci@400.....

This is the error message that I am getting on a Solaris 10 sparc server
scsi: no major number
cannot load drivers for /pci@400.....
Can't load the root filesystem
Type 'go' to resume
{0} ok
Is there a way for me to correct this issue. It looks like I am missing a scsi driver to boot up the server? Is there a way to boot into single user mode, mount the filesystem and rediscover the hardware, etc.....

First i guess you have to verify that you can find the disks with a probe-scsi-all
next you can boot it of a CD-rom/dvd into single-user:
boot cdrom -s
.. or similar into single-user from a jumpstart image:
boot net -s
Then you can mount the root disk under something such as:
/mnt
and rebuild the config with:
devfsadm -R /mnt
be careful if you have a mirrored filesystem though, you don't want to update just one of the mirrors without first breaking the mirror..
.7/M.

HP LaserJet Pro 400 M451dn Windows 2000 drivers

Hi , like in the subject , i want to install the M451dn on a computer with Windows 2000 , it is possible ? there is a way to do ?
it is very important because i have Workbench that doesn't work with another version of Windows
I tried with xp drivers and not working .
I tried with the Hp Laserjet III drivers and not working
I tried with generic drivers... nothing to do...
Please it is urgent .

Hi @dacul_21
I suspect your question would be better answered in the HP Enterprise Business Community, as the HP Color LaserJet Pro 400 M451 nw / dn / dw is a commercial model.
My technical expertise is with consumer products and software, I am sure the commercial folks would be happy to help if you re-post your question for them to answer. The HP Enterprise Business Community is an HP Forum designed for the Commercial and Enterprise customers to help one another. I am sure you will find some HP folks there to help too.
Click here to view the Printing and Digital Imaging. When the page opens you will see the option to 'Log in' or 'Register Now' on the right. The commercial forums are separate from the consumer boards, thus you will need to register if you don't already have a commercial account.
Best of luck.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

HP Prodesk 400 G1 MT drivers

Similar Messages

Maybe you are looking for