Hp prodesk 600 - bios power-on fail to start

I have a HP ProDesk 600 G1 SFF with Windows 8.1. I configured the bios power-on to start in a specific date but it doesn’t start!
I updated the bios recently: Bios version L01 V02.33 (15-07-2014)
I must start the computer each Friday at a specific hour. Thanks for your help

Hello @EricT01,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I have read your post on how your computer will not start up in the BIOS at a specific point in time, and I would be happy to guide you towards a resolution!
I am sorry, but to get your issue more exposure, I would suggest posting it in the commercial forums, since this is a commercial product. You can do this at:
http://h30499.www3.hp.com/t5/Business-PCs-Compaq-Elite-Pro/bd-p/bsc-271#.VCw95_lShXg
I hope this helps!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Similar Messages

  • BIOS Flash Utility Fails with "BIOS directory cannot be found"

    I download the 32-bit BIOS update 6fuj35us.exe and ran through the ThinkPad BIOS Update Utility Setup Wizard. After I click Finish I accept the option to update my BIOS. It fails to start the flashing process, with the error popup: "BIOS directory cannot be found. The utility process cannot be completed."  I tried the ISO image too, it burned and booted up correctly, but I got the exact same error message when I tried to run the flash.
    Has anyone been able to get over this issue? 
    Thank you
    Solved!
    Go to Solution.

    I had to send my machine back for a motherboard replacement.  Fortunately, they turned it around quickly, two days, as quickly as the shipping allows.

  • HP ProDesk 600 G1 mini doesn't detect SSD on M.2 slot

    PC model: HP ProDesk 600 G1 mini
    OS version: Windows 7 SP1 x64
    SSD: Crucial M550 - 256 GB - internal - M.2 - SATA-600
    After installing the SSD in to M.2 slot, the system does not see any device installed.
    Any ideas?

    The first thing I would do is enter the BIOS and go to the advanced tab. Enable the POST messages.
    Is the SSD recognized as present by the BIOS?
    SSD drives are an option with these. I suggest using the Crucial community forum.  Have you tried connecting the SSD to another PC to see if it is recognized? According to the Crucial forum experts, if it is recognized in another system you should update the firmware and try it in the desktop again.
    Crucial Community Forums
    Did you clone the disk before installing it? 
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • HP Officejet Pro 8500A Plus AC Power adapter failed. Where to buy?

    My AC power adapter failed. Where can I purchase a new one in Doha?

    There should be an electronics store near there. Go into google maps, bring up Doha, then search nearby and put in 'hp printers' which should be up some sort of electronics retailer. 
    If that doesn't work, then go to HP.com, put in your printer model, and follow the links, and you should be able to order one online. Just make sure you specify your region in your search, so that it doesn't think you are in Ireland, when you are actually in Qatar.
    007OHMSS
    I was a support engineer for HP.
    If the advice resolved the situation, please mark it as a solution. Thank you.

  • Power Mac G5 fails to start up with Airport Extreme card in.

    Hello.
    I just received a 'new' Airport Extreme card for my Power Mac G5 1.8 (900fsb). I just installed it and it failed to start up with it in. The mac started up but without my Apple LCD and any USB devices. I did a PMU reset on the logic board and took out the Crucial 3rd party 512mb RAM and tried again but it won't start up. When I take the card out it's business as usual.
    Is it the card or the mac that's at fault? Has anyone had this problem too?
    Your help will be greatly appreciated.

    This problem can happen if:
    - the card has not been fully seated into its socket (doing that can take a firm push) or if you installed the card upside down
    - the card is defective
    - the card socket in the PowerMac G5 has broken or bent contact pins
    Check the installation you did with:
    http://www.info.apple.com/usen/cip/pdf/g5/apec_c.pdf
    If you are sure the card has been properly installed, you are gong to have to either (a) try a different Airport Extreme card or (b) let an Apple dealer or service center take a look at your PowerMac G5.

  • Power button fails to work about 95% of the time

    Hello,
    I have a Toshiba P205-S6267 that is having a strange issue.
    About 95% of the time the power button fails to work when on battery, and it fails 100% of the time when the AC adapter is plugged in.
    I am getting pretty stumped on this one and starting to think I may need to replace the 7-button circuit under the power button.  Before I spend the $55 to do that, I wanted to see if anyone had any advice for me.
    Here are the things I have tried.
    - the standard unplug the power / battery and wait a few minutes then plug it back in.
    - tried this only on battery, same issue
    - tried only on AC, won't power up at all
    - checked AC adapter with multimeter and it was outputting the correct voltage (also it keeps the battery charged still)
    - removed the keyboard and speaker cover then reseated the 7-button circuit
    - cleaned the ribbon cable contacts and reseated the ribbon cable for the circuit
    - removed RAM and tried each stick by itself, no change.
    I'm kind of lost here.  Again, I am probably at a point where I need to replace hardware but I don't want to drop the cash without some kind of verification that I'm not retarded. 
    Any assistance or advice is welcome.  Thank you.

    Ah, I've been playing around with this and it seems I was mistaken about the nature of the problem.
    It is deterministic, for one. It seemed nondeterministic because the action that makes the glasspane paint() fail is the act of giving focus to the JInternalFrame that the glasspane belongs to.
    Why does giving focus to a JInternalFrame disable that frame's GlassPane? I can take focus away from it, and the repaint() method starts working again.

  • ProDesk 600 create recovery disks - use usb instead

    We have just received some HP Prodesk 600 desktop pcs - K1t26AW#ABA - running Win 7 Pro 64 bit - and would like to make system recovery media.  The HP program installed has only the option to make recovery disks and requires dual layer DVD's to be used.   I have had  other HP products that allow recovery media to be created either on DVD or usb.  Is there any software fix or utility to allow us to create the ProDesk 600 recovery media on USB instead of dual layer DVD's?  We have no dual layer DVD's and have no other use for them so we don't want to order a pack and have most of it laying around unused.  Thanks

    You can clone the partition to an external usb disk with a cloning utility program. It won't have any effect on the one time usb or DVD recovery media creation limitation.
    If I may give a word of advice:
    Create a recovery usb flash drive. It is reliable, fast and durable. 
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • DFM - Power Supply Failed Detection on 4500s LMS 3.2

    Hello,
    This device has two power supplies,  when one of them fails LMS (DFM) doesn't detect it.
    What is the problem?
    I attach some information.
    Thanks

    go to the Detailed Device View for this device, then under Environment > Power Supply check if the managed status for both power supplies is "true";
    from the output of your SNMP walk both power supplies are ok;
    You can still add an Automatic Action on the syslog message generated when the power supply fails which e.g can send you an email;

  • Hp pro 3125 supports 600 watts power supply

    Can HP Pro 3125 supports 600 watts power supply ?
    Can HP pro 3125 PCIe supports ddr5 graphic cards?
    This question was solved.
    View Solution.

    You would be better served by joining the HP Business Enterprise forum and posting the question there.
    The pc you are asking about is a business model.
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • Power pack failed on iMac Lion and replaced by Apple. Computer facing top left hand side and behind is very hot. Is this normal

    Power pack failed on iMac OSX Lion and replaced by Apple at a cost. Computer top left and behind is very hot. Is this normal.

    Take it back to the shop that did the repair and show them. Check other iMac's on the floor to see if they have this same heat problem.

  • What is the latest OS I can put on my iBook?  600 MHZ Power PC G3

    What is the latest OS I can put on my iBook?  Mine has OS X 10.3.9.  It is 600 MHZ Power PC G3.  It won't connect to my home wifi, so I need a later OS.

    Swazoo wrote:
    Thank you, I pass that test, but noticed on several sites that i need 256 MB for Tiger 10.4.  I am not sure if this is true or not.  Also, I am not sure where to find a download of the OS (can i download it on my PC, burn it, and use CD it to install?
    Hi, and welcome to Apple Support Communities.
    I wouldn't mess around with a measly 128 MB upgrade (assuming that's what you have now). Instead of merely doubling the RAM, maximize it with a 512 MB module.
    http://eshop.macsales.com/item/Other%20World%20Computing/100SO512328L/
    Good luck.

  • Power adaptor failing

    In the last week or so, my power adaptor has simply stopped working at times. I've found that by disconnecting everything, then putting it back together, it will work for a short time. However, now it has stopped charging all-together. First, is there any possible solution, outside of buying a new adaptor, to fix this issue? And, if I need to replace the adaptor, is this covered under the warranty?

    If you are still under warrenty, then yes it is covered.
    You can work your way through these links,  start here:
    https://selfsolve.apple.com/agreementWarrantyDynamic.do
    When my power adapter failed recently ,  Apple shipped a new one and I got it 22 hours later,
    and I still had 2 hours left on my battry power!  Awesome costumer service.
    http://support.apple.com/kb/ts1713

  • SCCM2012/MDT2013 - HP PRODESK 600 G1 - Nic Drivers

    HI all
    wondering if anyone out there can helpme, trying a SCCM/MDT deployment for a client, they have a Desktop HP ProDesk 600 G1 SFF and i cannot for the life of my get the damn Nic driver to work. i have downlaoded all the drivers i can find for this model and
    none seem to work. 
    I have injected the WinPe 3/4/5 drivers available and all the drivers for windows 7/8
    Nothing im tearing my hair out please help
    Chris

    It's quite possible that you now have too many drivers in your boot image. Save all the possible drivers to a USB drive and try again. This time, at a command prompt, use drvload.exe to load each driver in turn to establish if it works (ie you get an IP
    address).
    See here for correct use of drvload.exe
    http://technet.microsoft.com/en-us/library/cc766390(v=ws.10).aspx
    Gerry Hampson | Blog:
    www.gerryhampsoncm.blogspot.ie | LinkedIn:
    Gerry Hampson | Twitter:
    @gerryhampson

  • HP Prodesk 600 G1

    Good Day, we have a number of new units HP ProDesk 600 G1 and already installed Windows 7 64 bit OS, our company have a software with compability to Windows XP OS and we found out that this new issued desktops have only compatible to Win 7 and Win8 OS drivers, can you help us to solve/ search for the device drivers of this unit for Windows XP.
    Thank you and God Bless.
    Ramon / UltraM

    Hi,
    You might get better assistance on the HP Enterprise Business Forum.
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

  • 600 watt power supply

    So I found that I need a 600 watt power supply for a HP ENVY 4120T desktop how big does it need to be?

    As you were previously told by Big_Dave,  the Corsair CX600 listed here is perfect.  It is an exact fit into your case.
    I am a volunteer. I am not an HP employee.
    To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
    The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
    (2) HP DV7t i7 3160QM 2.3Ghz 8GB
    HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
    Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
    Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
    Both Customs use Rosewill Blackhawk case.
    Printer -- HP OfficeJet Pro 8600 Plus

Maybe you are looking for