HP Product Improvement Study pop-ups will not stop even after uninstalling it.

I opted in to the Product Support feature when I was installing my HP Pro 8600 thinking this would be only a one time deal but I was wrong. At least twice a week the notification pops up that the information gathered is ready to be transmitted and quite frankly is getting more than annoying.
I have gone to the Control Panel and uninstalled the program for this feature, rebooted and still this message will not go away. Is there anything else that needs to be uninstalled or has HP planted something in the Registry that needs to be removed?
Are there any other options other than totally uninstalling the printer software and re-installing it? This last option shouldn't be an option at all as there should be an easier fix.
This question was solved.
View Solution.

If you uninstall the program HP OfficeJet 8600 Product Improvement Study from the Control Panel, you should not see any popups unless the uninstall didnt work for some reason.
Can you go to All Programs\HP\HP OfficeJet 8600 and look for HP Product Improvement Study and click it. This should launch a screen that lets you opt out of the study. Click the I Decline button and you should not see any more pop-ups.
Hope this helps
I work for HP but the replies and suggestions are my own.

Similar Messages

CS5.5 and OSX 10.9.4: Most applications will not launch even after uninstalling and reinstalling the Creative Suite 5.5. After my 2011 MacBook Pro 17 died, I had to purchase a new MacBook Pro 15 to replace it. I performed a Time Machine installation from

CS5.5 and OSX 10.9.4: Most applications will not launch even after uninstalling and reinstalling the Creative Suite 5.5. After my 2011 MacBook Pro 17 died, I had to purchase a new MacBook Pro 15 to replace it. I performed a Time Machine installation from that 2011 machine, and only Distiller and Acrobat would launch (none of the rest of the creation apps). So I ran the CS5.5 installer, uninstalled, then reinstalled, producing the same result. When I try to launch, nothing happens. What next?

Try...
Adobe Creative Suite Cleaner Tool
helps resolve installation problems for CS3 thru CS6 and for Creative Cloud
http://www.adobe.com/support/contact/cscleanertool.html

Firmware 1.1 upgrade will not install - even after uninstalling Parallels

I was asked to upgrade my firmware (on many occasions, actually). I go through the process and it will not install. It asks me to shut down the computer and continuing holding the button until the light blinks. It then makes a noise (high pitch tone), this stops, the mac screen comes up gray and a bar comes up and disappears immediately. The computer boots and then the firmware page opens and asks me to go through this again. I cannot get to "OK". I called Apple and was told this happens with Parallels installed and I should uninstall this. I have tried this and it makes no difference. There may be some files I should delete - but I wasn't instructed to do this.
HELP!!!!
Mac Pro Mac OS X (10.4.9) Parallels virtualization for XPpro

Hi Tom,
very easy by booting up from a Non-RAID-Boot Volume.
This could be an internal or even an external Drive, doesn't matter.
One of the reasons I have two external drives for my tow Macs.
Regards
Stefan

My iPod Touvh 4th Generation won't turn on. It will not charge even after I used a few chargers and will not connect to a computer. The Home button is broken and I don't know if the Lock/Sleep button is now broken or stuck as well. What should I do?

My iPod Touvh 4th Generation won't turn on. It will not charge even after I used a few chargers and will not connect to a computer. The Home button is broken and I don't know if the Lock/Sleep button is now broken or stuck as well. I believe there may be a problem with the battery or the backlight. I've had my screen replaced once by some stooges. What should I do?

Try:
- iOS: Not responding or does not turn on
When it says place the iPod in recoverymode use one of these programs.
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
and
RecBoot tip
For MAC or PC
The Firmware Umbrella - TinyUmbrella
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

App will not open even after reinstallation

How do I resolve this? Reinstalled multiple times, tried shuttting iPad down, is it a settings issue?? Running iOS 5.1.1 still, is that the issue?

I'm sorry to hear that you have trouble running
PS Touch. Please try to install via iTunes. This normaly helps.
-Guido
Am 02.02.2013 um 06:34 schrieb "seankelleher" <[email protected]<mailto:[email protected]>>:
Re: App will not open even after reinstallation
created by seankelleher<http://forums.adobe.com/people/seankelleher> in Adobe Photoshop Touch - View the full discussion<http://forums.adobe.com/message/5041972#5041972

My Ipod touch says i have to connect it to iTunes so i can restore it but it will not restore even after following the steps to fix the problem.

My Ipod touch says i have to connect it to iTunes so i can restore it but it will not restore even after following the steps to fix the problem.

After pressing restore and after l5 minutes or so It comes up with the error 1611 and I followed all the steps but it still won't work.

My ipod will not open even after following instructions online

my ipod will not open even after following instructions online

Do you mean you can't unlock it?
We have no way of knowing exactly which online instructions you may have tried.
Apple - Support - iPod touch - iPod touch Troubleshooting Assistant
iPod touch: Hardware troubleshooting

Images and Pop-Ups Will Not Open in IE???

I have several .html pages being displayed within an i-Frame.
There are thumbnail images on .html pages that are being displayed
within the i-frames, and these thumbnails are not displaying in IE,
even though they do display in Firefox. The thumbails are linked
through JavaScript code (written by Dreamweaver 8) to open up .html
pages. Some of these thumbnails are displaying (even though some do
not and all use the same code), though the links to the pop-ups are
not working.
Everything works fine in FireFox, this is only a problem in
IE. I am using version 7 of IE.
Does anyone have ANY ideas why this may not be working????
Thanks for any assistance!!!!

IE7 has popup blocking turned on by default. You may need to
alter the
settings
Paul Whitham
Certified Dreamweaver MX2004 Professional
Adobe Community Expert - Dreamweaver
Valleybiz Internet Design
www.valleybiz.net
"jjhtwin2" <[email protected]> wrote in
message
news:ep8l97$5ea$[email protected]..
>I have several .html pages being displayed within an
i-Frame. There are
> thumbnail images on .html pages that are being displayed
within the
> i-frames,
> and these thumbnails are not displaying in IE, even
though they do display
> in
> Firefox. The thumbails are linked through JavaScript
code (written by
> Dreamweaver 8) to open up .html pages. Some of these
thumbnails are
> displaying
> (even though some do not and all use the same code),
though the links to
> the
> pop-ups are not working.
>
> Everything works fine in FireFox, this is only a problem
in IE. I am using
> version 7 of IE.
>
> Does anyone have ANY ideas why this may not be
working????
>
> Thanks for any assistance!!!!
>

Permissions will not set, even after using terminal commands?

Hey,
I found a thread on here for using the terminal to type in commands for the user permissions and for the PSIX permissions on Leopard (10.5) server. These commands are supposed to clean the server of all underlying(hidden) permissions that you cant see and then you are supposed to be able to then set the permissions again and finally, to hit "Propagate Permissions" so that all the permissions set for the shared volume then get farmed out to all sub files/folders. This did not work when I tried it in the terminal, it said "Command not found" even after I typed in the admin password. Is there anyone out there who can tell me the actual way to fix the old permissions and get new ones set?
The story is: We had an old server on a G4 when i first took control of the server, I took the shared hard drive out of the G4 and inserted it into a G5 and started using it with the leopard server. the permissions did not really need to be set on that volume because they had carried over from the last time they were shared. But we recently just got a Drobo unit for our server and I recently transferred all the shared files and folders over to the new volume, but ever since I cant get the permissions to farm out to all the stations, it shows me that its done on the server. But when I go to access the files I am able to delete faculty folders where I had set the permissions to "read only" so I am wondering if there is a streamlined way of going about this or if I should just start from scratch and use all brand new HDD's?
Please Help!

Hi ..
Try the tips mentioned here > Mini-tutorial: Force-deleting stubborn or problematic files in Mac OS X

HT1491 My password in iTunes will not work, even after changing it. It keeps showing a window to add PW. I do and it pops up again.

My PW in iTues will not work. Even after changing it. Window pops up and ask for PW. Over and over.

I would be worried about that - but it may turn out to be nothing.
Since you already changed your password, you're probably OK - but I recommend looking at your purchase history to see if there's any unauthorized purchases (use iTunes on your Mac or PC to go to the itunes store, then click your account in the upper-left or upper-right corner). If there are any new purchases that you didn't make, click the button to report problem (and if they happened after you reset your password, you should immediately change your password again).
I think sometimes when you change your password and verifiy your credit card info, it can "reset" the warnings - so it may actually have been you logging in to your own account that caused you to get the warning. But I'm not absolutely sure of that, so it's best to check your purchase history (and reset your password if necessary - but you already did that).
I also recommend turning on "two-step verification" (but Apple makes you wait a few days after changing your password to turn that on). With "two-step verification", Apple will send you a text message with a 4-digit code the 1st time you try to buy something from a new computer - since a hacker won't have your phone, they won't be able to continue (theoretically). After the 1st time, it goes back to mostly working normally (until the 1st time you try to purchase from another new computer, then you get another text message - so this alerts you to someone, somewhere else, trying to get into your account).

Some Songs Will Not Play Even After Being Authorized

Just this past weekend, I had to reinstall Tiger and then upgrade to Leopard due to a “kernel panic” that would not go away no matter what was tried. As such, iTunes was started from scratch. Unfortunately, I could not locate my iTunes library within the Previous System folder after this reinstall. In all honesty, I probably just didn’t know where to look.
So, I transferred my music from my iPod to my iMac. But, some of my songs will no longer play. The songs that will not play are songs that I purchased and downloaded from iTunes. However, the recent songs purchased and downloaded will play…it’s songs that were purchased and downloaded a few months ago. Strange.
When I click these songs a box pops up for me to authorize it. I do so and it says that this computer is already authorized. I click on the song again and the same thing repeats itself.
I have two accounts that I have used. I have both accounts authorized on this computer. I have restarted with no success. I have unauthorized and reauthorized with no success. I’m afraid to sync my iPod in case these same characteristics transfer to my iPod.
I have not updated Leopard to the latest version as of yet since I just reinstalled from the disc orginally sent with my iMac. Any help is greatly appreciated as I’m out of ideas…

I had the exact same problem today. Two days ago I let Software Update auto-install Security Update 2008-008 (Client Intel) on my machine. I was rewarded with the gray screen and spinning wheel that never went away, and after hours of fruitless attempts to resolve the problem with Disk Utility and Terminal, I was forced to Archive and Restore to 10.4.8 and then rebuild my system back to 10.4.11.
I thought everything was fine after that until I went to play my iTunes music tonight. Though I'd had no problem playing music ripped from CDs, anything that I'd bought from the iTunes store wouldn't play -- it gave me the exact same error that you reported. I've followed all of Apple's troubleshooting steps -- repairing disk permissions, deleting the SC Info folder, etc., and nothing worked. I spent nearly an hour online with iTunes Chat Support and they say that my account tests fine on their end, so it's not iTunes -- something must have happened to my machine.
Personally, I think it was Security Update 2008-008. It's been nothing but trouble.
Now I have to pay $50 for a phone call to Apple Tech Support. Lucky me.

HP Officejet Pro 8600 Plus will not copy even after hard reset

HP Officejet Pro 8600 Plus on Windows 8 OS
Will print from computer; will scan documents & save to computer; will NOT copy document on the unit.
Shut down printer; unplugged from wall and back of unit; held on/off button for 60 seconds; plugged back in; started unit.
Placed document on glass; hit copy; hit black; Unit pulls sheet of paper; unit scans document (squeaks while scanning); after period of time, it spits out paper & reads "copy cancelled", but does not clear or return to home screen.
HELP!!
This question was solved.
View Solution.

Hello,
Please check your private message inbox for the reset I'm going to send you.

Spoken work files will not play even after importing/converting?

I have some audio files recorded on my Android phone with the basic recording app and the files play when I press the spacebar to preview them in Mavericks. However, after importing them into iTunes using various import settings, including the podcast spoken word ones, they just will not play. When I double click on the file it looks like it is about to play, the apple icon at the top switches to what looks like a progress bar, though it is different from other tracks that do play, and then it immediately switches back to the apple icon and does not play.
Any ideas of anything I can do?
Thanks.

I've found an issue with movies when the audio is IMA format. Is that the format of your audio?

IPhoto Will not Load even after reinstall

All of a sudden, iphoto will not load....I receive this error:
Iphoto cannot be loaded because of a problem.
Check with the developer to make sure that iphoto works with this version of Mac OS X. You may need to reinstall the application. Be sure to install any available updates for the application and Mac OS X.
I reinstalled iphoto from the disk (so now I have iphoto and iphone (original) .....i reboot and then try to access the new iphoto....same error. iphoto library appears ok. I can still attach a pic via "photo browser" button in email.
Details are below:
Process:         iPhoto [240]
Path:            /Applications/iPhoto.app/Contents/MacOS/iPhoto
Identifier:      com.apple.iPhoto
Version:         ??? (???)
Build Info:      iPhotoProject-4750000~1
Code Type:       X86 (Native)
Parent Process: launchd [148]
Date/Time:       2012-03-13 21:32:11.581 -0400
OS Version:      Mac OS X 10.6.8 (10K549)
Report Version: 6
Interval Since Last Report:          91733 sec
Crashes Since Last Report:           9
Per-App Crashes Since Last Report:   9
Anonymous UUID:                      3B8356D3-F2A7-4D47-8AA0-E7754B24F8F4
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 0
Dyld Error Message:
Library not loaded: /Library/Frameworks/iLifePageLayout.framework/Versions/A/iLifePageLayout
Referenced from: /Applications/iPhoto.app/Contents/MacOS/iPhoto
Reason: image not found
Binary Images:
0x8fe00000 - 0x8fe4162b dyld 132.1 (???) <A4F6ADCC-6448-37B4-ED6C-ABB2CD06F448> /usr/lib/dyld
Model: MacBookPro6,2, BootROM MBP61.0057.B0C, 2 processors, Intel Core i7, 2.66 GHz, 4 GB, SMC 1.58f15
Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 512 MB
Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.10.131.42.4)
Bluetooth: Version 2.4.5f3, 2 service, 12 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: Hitachi HTS545050B9SA02, 465.76 GB
Serial ATA Device: MATSHITADVD-R   UJ-898
USB Device: Hub, 0x0424 (SMSC), 0x2514, 0xfa100000 / 2
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x0236, 0xfa120000 / 5
USB Device: Internal Memory Card Reader, 0x05ac (Apple Inc.), 0x8403, 0xfa130000 / 4
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 3
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8218, 0xfa113000 / 7
USB Device: Hub, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0xfd120000 / 4
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8507, 0xfd110000 / 3

ok, I trashed all of the receipts related to iphoto (once i knew to search on "iphoto receipts" this is what everyone said). I relaoded from the ilife '11 disk.....tried to load iphoto and got what you see below...same exact issue.
Process:         iPhoto [3516]
Path:            /Applications/iPhoto.app/Contents/MacOS/iPhoto
Identifier:      com.apple.iPhoto
Version:         ??? (???)
Build Info:      iPhotoProject-4750000~1
Code Type:       X86 (Native)
Parent Process: launchd [148]
Date/Time:       2012-03-15 19:31:40.175 -0400
OS Version:      Mac OS X 10.6.8 (10K549)
Report Version: 6
Interval Since Last Report:          175963 sec
Crashes Since Last Report:           29
Per-App Crashes Since Last Report:   14
Anonymous UUID:                      3B8356D3-F2A7-4D47-8AA0-E7754B24F8F4
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 0
Dyld Error Message:
Library not loaded: /Library/Frameworks/iLifePageLayout.framework/Versions/A/iLifePageLayout
Referenced from: /Applications/iPhoto.app/Contents/MacOS/iPhoto
Reason: image not found
Binary Images:
0x8fe00000 - 0x8fe4162b dyld 132.1 (???) <A4F6ADCC-6448-37B4-ED6C-ABB2CD06F448> /usr/lib/dyld
Model: MacBookPro6,2, BootROM MBP61.0057.B0C, 2 processors, Intel Core i7, 2.66 GHz, 4 GB, SMC 1.58f15
Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 512 MB
Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.10.131.42.4)
Bluetooth: Version 2.4.5f3, 2 service, 12 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: Hitachi HTS545050B9SA02, 465.76 GB
Serial ATA Device: MATSHITADVD-R   UJ-898, 3.5 GB
USB Device: Hub, 0x0424 (SMSC), 0x2514, 0xfa100000 / 2
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x0236, 0xfa120000 / 5
USB Device: Internal Memory Card Reader, 0x05ac (Apple Inc.), 0x8403, 0xfa130000 / 4
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 3
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8218, 0xfa113000 / 7
USB Device: Hub, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: Composite Device, 0x0461 (Primax Electronics), 0x4d03, 0xfd130000 / 5
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0xfd120000 / 4
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8507, 0xfd110000 / 3

Black ink cartridge will not print even after installing a new cartridge

my black ink cartridge is brand new and will not produce any print. The other 3 color cartridges are also new and they print fine. The set up cartridge is out of ink. Is it needed once the printer has been set up?

Hello rhergnal,
Welcome to the HP Forums.
I see that you are having some issues with printing in black.
Just so you are aware, you do not need to keep the starter ink cartridge once it has been used. It will not be needed again.
Please click on the following link that deals with when the Printer Prints a Blank Page or Does Not Print Black or Color Ink for the HP Photosmart Premium e-Al....
Please feel free to write me back if you have any other questions or concerns.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

HP Product Improvement Study pop-ups will not stop even after uninstalling it.

Similar Messages

Maybe you are looking for