Hp psc 1110 all-in-one printer-copier-scanner

Recently I've been experiencing a problem with my printer (hp psc 1110 all in one): it will print fine, then suddenly it will not print even though the print job is listed in the que. If you turn the printer on and off, it will then "flash" in the system tray, but still won't print. I've tried restarting the print job, deleting the print job, etc. but nothing will make it print except to restart the computer. Then it repeats again where it will print a job or two then stop. I've checked connections, and unloading and reloading the drivers, but none of that helps. This is a great little printer -- I'm thinking it may have to do with the computer? It is connectly locally to a stationary, but we can also print wireless from several laptops. Has previously been working great, until just recently.
Hope there is an easy fix.
ciw

HP PSC 1110 All-in-One Printer

Similar Messages

HP PSC 1210 All-in-One Printer -- need Software (scanner directory), for windows 7 (64) bit

hi,
I am kind of done with this Printer ! lost hope in customer care and support hit with HP ! from Past 10 days searching a software to scan few doc from my printer 1210 (HP PSC 1210 All-in-One Printer) but i dint find.... i got one from some source (166 Mb) file, but to my surprise its not compatable with Windows 7. i am totally depressed now.... Please help me to find software for this (scanner document) I have lost the CD lont time back can i download This some where?

Hi there,
I understand you're looking for drivers for your PSC 1210 on Windows 7. I will certainly do my best to guide you in this issue.
At this time there are no HP drivers available for this printer for Windows 7. You can still use the printer with Windows 7, you will just have to use the drivers available within Windows 7. That document will walk you through what you need to do in order to get printing again, and will also show you how to scan with this Windows driver.
Hope this helps, have a great day!!
Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
**MissTeriLynn**
I work on behalf of HP

Printing with Hp psc 1110 all-in-one

Hello, is the first time for me with macbook problem and I hope to find the solution because the question is drive me crazy ...
I've tried to install a printer HP psc 1110 all-in-one, but after te installation of driver and software when i start to print the printer return me every time the same error (that i find in the log of printer)
E [15/Jun/2010:16:39:39 +0200] Unable to execute /Library/Printers/hp/cups/Inkjet7.driver/Contents/MacOS/Inkjet7: no execute permissions (0100664)
E [15/Jun/2010:16:39:39 +0200] [Job 2] Unable to start filter "/Library/Printers/hp/cups/Inkjet7.driver/Contents/MacOS/Inkjet7" - Operation not permitted.
E [15/Jun/2010:16:39:39 +0200] [Job 2] Stopping job because the scheduler could not execute a filter.
I've tried to do the installation of software many times but the problem is still the same.
Can someone help me?
thank you so much

I think you might have installed Old HP SW that is not compatible with 10.6.x. You have 3 choices:
- Delete all the HP SW you installed. The in system prefs, re-add the printer. 10.6 will download the drivers you need.
- Delete all the HP SW you installed. Download the drivers manually from Apple. (http://support.apple.com/kb/dl907) Install them.
- Visit HP's web site and download 10.6 compatible drivers.
Note to everyone, over 2000 drivers are built into the OS. If they work, don;t install older SW on top of them. The list of built-in drivers is here: http://support.apple.com/kb/ht3669

Hp psc 1110 all-in-one

My printer : hp psc 1110 all-in-one
When I switch on the printer the power to the printer just comes and goes off immediately. Tried the steps as in the video , but no solution. What should I do. Do you have online chat for help ?

Hi @BHUCH,
Welcome to the HP Forums
The first thing I'd suggest you try is plugging the printer directly to a wall outlet. If it's already in one, please try a different outlet in the kitchen (they generally are the most powerful). Even the best power bars and surge protectors limit the power the printer gets.
Also try completely unplugging the printer, from the rear of the printer, the wall outlet and the adapter. Leave everything detached for at least 1 minute. While the printer is completely unplugged try pressing and holding the printer's power button for about 10-15 seconds to make sure any power it's holding is drained.
If the printer is still turning off, check the power adapter on the printer's power cord (the brick piece) and see if there is an LED light on it at all. If there is an LED does it turn on when the printer is plugged in?
Let me know how this goes for you
Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
**MissTeriLynn**
I work on behalf of HP

HP Officejet and PSC Full Feature Software for HP PSC 1210 All in one printer

Hello ,
I have HP PSC 1210 All in one printer but i am using windows 7 system.how can i find
'HP Officejet and PSC Full Feature Software'
compatible for windows 7, in hp.com i sould find the above software for windows xp but for windows xp its not working, my printer physical keys are not working so i need software to do everyything from print to scan, copy etc from my windows 7 laptop itself. pls help with sofware for windows 7

Hi,
There is not a full feature software Win 7 download available for the HP PSC 1210. The following document includes instructions on how to install the in-OS Win 7 driver with instructions on how to scan:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01796879&cc=us&dlc=en&lc=en&os=4062&product=907...=
I work for HP.

Paper Jam for HP PSC 1610 All-in-One Printer

Paper Jam for HP PSC 1610 All-in-One Printer:
I had a paper jam and cleared the paper from the printer. Now every time I turn the printer "on" it picks up the top piece of paper from the tray and runs it about ½ to ¾ of the way thru the paper feed, stops, and then displays message "paper jam clear paper and then press OK". When I do that it simply picks up the next piece of paper off the tray and does the message again. If I push the OK button on the printer it will simply finish the ejection and then pick up the next paper from the tray, and do the same thing. I have examined the interior (and exterior) of the printer for paper scraps and any other obvious sign of trouble (dirty drive wheels, missing rollers, broken springs, etc...) and can not see anything unusual. I can not print a test print because of the paper jam message. I am running Windows XP and the printer has been working fine for months (until this recent jam). I did all the steps from the HP fix it site including clean rollers, plug and unplugged, carriage travel OK and more. Don't know what to do now........Any help would be great!!!! Thank you!

Hi my printer psc 1610 hp not picking paper

Hp psc 1315 all-in-one printer

I have installed a hp psc 1315 all in one printer on my new Mac OS X version 10.9.5.
While I can print without any problems, I don't have access to scan a document from the printer to my computer.
Can anyone help with this?
Thank you.

Hello @annlf
Welcome to the HP Community!
I hope to help you with the scanning concern you have today.
Unfortunately, you will not be able to scan using HP software with your PSC 1315 (older model), on Mavericks (newer OS X), as there is no Full Feature driver (includes scanning software) available.
However, you do have some other options to scan. See this link for your options. Scroll down when the guide loads and select "How do I scan with the driver from Apple Software Update?"
OS X v10.9 Mavericks: Installing and Using the Printer on a Mac
Have a wonderful Wednesday
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Installing HP PSC 1350 all-in-one printer/scanner

In the past, I could usually solve the "Offline" or "Not Connected" problems by unplugging my printer for a few minutes, but that no longer works. So, I decided to buy another one. However, just before clicking on the BUY button on Amazon, I decided to try to fix the problem one more time. Part of the "fix" was deleting my printer from the computer and then reinstalling it. This is where I'm now stuck. I deleted it, but I can't reinstall it. I get to the ADD window, but everything is grayed out. So, how do I install my printer? I might add that the HP instructions that I was following (OSX v. 10.9 Mavericks- Installing and using the printer on a Mac) are what got me this far.

Have you installed the v10.9 Mavericks compatible driver yet >> Software & driver downloads HP PSC 1350 All-in-One Printer | HP® Support
After you download the driver, open System Preferences > Printer & Scanners > Print
Delete the current printer by selecting it then click - (minus)
Then click + to add the printer back in.
That should load the driver for you.

Psc 1315 all-in-one printer will not feed paper. There is no paper jam.

psc 1315 all-in-one printer has stopped feeding paper. There is no paper jam.

hi there sorry to learn that you are having this issue.
Are you still facing this issue? If you are I will do my best to help you.
Have you upgraded the firmware of your printer lately; you can get the latest firmware in the main support page for your printer
This is the main support page for your printer, GO HERE Go to software and drivers download and select your operating system. You should also upgrade the firmware of the printer.
If you are not experiencing this issue any longer, May you let me know, your time and courtesy,
will be deeply appreciated.
Regards;
RobertoR
remember ==▼
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

Hp psc 1210 all in one printer feeding error

I have a model 1210 all in one printer and it will not feed paper. it sounds like something its working, but not gripping the paper. PLEASE ADVISE

Hello @anne0701 , and welcome to the HP Forums!
I can see you're experiencing paper feed issues. I would like to help!
I would recommend performing a power reset. Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
I would also suggest following the steps in this video on PSC feed issues:
Fixing Paper Pick-Up Issues - HP PSC 1200 All-in-One Printer
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

HP psc 1350 all-in-one printer

Re HP psc 1350 all-in-one printer, it it possible to connect a usb wirless adapter into this printer, so that it effectively becomes a wireless printer? (dumb question? but thanks in advance anyway)
This question was solved.
View Solution.

You need a device called a wireless print server. Get one with a usb interface. Here is an example of one.
WPS

HP PSC 2355 all-in-one printer cuts off bottoms of letters

My HP PSC 2355 All-In-One Printer cuts off the bottoms of letters. Photos are fine. 3rd HP black cartrige, got worse today.
On a Mac, 10.9.3.

Hi @timed
I would like to help you with your 2355 printer. A printer reset can initiate an alignment. Please use the following document to troubleshoot the issue, and let me know the outcome of your efforts; Troubleshooting Print Quality Problems with the Diagnostic Page.
If the issue remains unresolved after following all of the steps in the link above, I recommend contacting HP.
Don't hesitate to call, although the printer may be out of warranty, the cartridges could be in warranty; therefore, there wouldn't likely be a fee for the phone support. HP will, at HP's option, either replace products under warranty that prove to be defective or refund the purchase price.
They could even determine after troubleshooting that it is a problem with the printer, in which case they may offer you a discount on a newer model.
The number to call HP is 1-800-474-6836 for Canada and US, or you can Contact HP Worldwide.
To find the “Warranty Ends” date, look in the following table for the date's location on each product. The date follows the YYYY/MM/DD or YYYY/MM format, where YYYY indicates the year, MM indicates the month, and DD indicates the day.
I hope this helps.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

HP PSC 1310 All-in-One Printer

Hi
I need to download the the full set of drivers & software so i can install them on a friends computer who does not have a internet connection yet and will not for a while yet..
the only ones i can see need to connect to the internet to download the drivers..
Printer = HP PSC 1310 All-in-One Printer
Operation system = Windows 8.1 x64
PS: Why do printer companies make it so difficult to download the full set of drivers\software when people have spent good money buying there printers.... i get asked this question a lot but people....
thanks
We all make mistakes said the Dalek climbing off the Dustbin.

Hello,
Full feature driver is available for download for this model. Please select the OS from the drop down list first and then select next to download the driver.
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=2093&lc=en&cc=us&dlc=en&sw_lang=&product=3745...
I work for HP but my posts and replies are my own.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution

PSC 1510 All in one printer - won't print even black and white when colour cartridge not recognised

My PSC 1510 All in one printer is flashing the "check printer cartrige icon" and both "Black" and "Colour" icons at the bottom left of the printer.
It won't print at all, even when I select grayscale (black and white). The help pages tell me that if I remove the colour cartridge the printer will switch to backup mode and I'll still be able to print in black and white (though not copy or scan). But this is not the case, and I can find no way of switching manually to backup mode. The help pages have no useful explanation of backup mode. I've also tried cleaning the cartridge (which I'm pretty sure isn't empty) but that makes no difference.
Can anyone help? I'd be very grateful.

gabri21 wrote: I have a very similar problem with my PSC1510 but only the colour cartridge light is blinking. I am also unable to find any useful information to set up printing in back up mode. Can anyone assist in resolving this problem for us?
With only one cartridge light blinking I would suspect the cartridge, they do rarely fail (much more often for reman cartridges, see here). Clean the cartridge contascts as shown here. If that fails and the cartridge is an original HP then check the warranty date as shown here. If the cartridge is in warranty return it to your dealer for a warranty replacement.
The printer will automatically switch to backup mode if the black (or color in some printers) cartridge is removed. I do not know if this works with the PSC 1510, some all-in-on devices insist on having both cartridges present.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Windows RT and HP PSC 1510 All-in-One printer connection

Hi, I have a Windows 8.1 RT tablet (Microsoft Surface 2) and a wired HP PSC 1510 All-in-One printer. Now when I plug in the printer via the USB, there is no driver that can be found to make this printer work with my device. Anyone have this problem or any solutions? I've tried looking at HP support and nothing there has been helpful.
Let me add that on the Microsoft Surface, you cannot run .EXE files which are the file types of the HP drivers.
Thanks ahead
This question was solved.
View Solution.

Hi,
I afraid the printer is not supported on Windows RT, as you may find listed within the following support document:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03168175&tmp_task=prodinfoCategory&cc=us&dlc=en...
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Hp psc 1110 all-in-one printer-co​pier-scann​er

Similar Messages

Maybe you are looking for

Hp psc 1110 all-in-one printer-copier-scanner