HP psc 1210 all in one printer - Printing photos with Green Hue

Hey folks,
it used to work fine, now for no apparent reason, it is printing out photos with a strong green hue. They all come out looking very green and yellow.
I have done several things - i have downloaded and updated all printer software and drivers, i have ran all printer calibrations and cleaning programs, i have accessed Macbook utilities folder and ran all colorsync utility's such as repair and adjust hue. What is going on here? I am completely stumped with this one.
Thanks,
Steve.

Hi,
What application you are scanning from? is it Paint or Windows fax and scan?
Can you see the same behavior while using any of those options?
You may find the exact steps to scan on Windows 7 with the PSC 1210 within the FAQs section below:
http://h10025.www1.hp.com/ewfrf/wc/document?docnam​e=c01796879&cc=us&dlc=en&lc=en&os=4062&product=907​...
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Similar Messages

  • Using HP psc 1210 All-in-One to print from Wordperfect 11

    I just purchased a new HP 64-Bit computer and a new copy of Wordperfect 11. I hooked everything up and installed the new program, but I can't get my printer to print correctly. I tried installing all the newest updates and any service packs offered for Wordperfect but it still won't work. It will print, but the image is distorted and it only does it with the Wordperfect program. Please help since I use the program for my small business.

    No one can help me!?

  • HP Officejet and PSC Full Feature Software for HP PSC 1210 All in one printer

    Hello ,
                 I have  HP PSC 1210 All in one printer but i am using windows 7 system.how can i find
                                                                                'HP Officejet and PSC Full Feature Software'
    compatible for windows 7, in hp.com i sould find the above software for windows xp but for windows xp its not working, my printer physical keys are not working so i need software to do everyything from print to scan, copy etc from my windows 7 laptop itself. pls help with sofware for windows 7

    Hi,
    There is not a full feature software Win 7 download available for the HP PSC 1210. The following document includes instructions on how to install the in-OS Win 7 driver with instructions on how to scan:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01796879&cc=us&dlc=en&lc=en&os=4062&product=907...=
    I work for HP.

  • How can I fix a check paper error on the HP psc 1210 all in one printer?

    Product name/number:  HP PSC 1210 all-in-one
    OS:  Windows 7
    Error Msg:  Check Paper light flashes
    I have verified there are no paper jams, paper is loaded, print cartridges move freely and rollers are clean.  Is there a a paper out switch that can fail?

    Hi there,
    This article should cover the issue you are experiencing. Give the steps outlined a shot and let us know if it helps.
    Best of Luck!
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • HP psc 1210 all-in-one printer and Mac OS 10.9 (Mavericks)

    I just installed the new OS X (Mavericks) on my mac yesterday, and now my printer, an old but reliable HP psc 1210 all-in-one, will not install.  I was previously running OS 10.6 (Snow Leopord) and had no problems with the printer.  Is there anything I can do to install my printer on the new OS?  My computer doesn't even recognize that there is a printer connected via USB when I try to install it... is there anything I can do?

    Hello,
    Here is a link to a support document on hp.com on how to install on OS X Mavericks.
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03967522&tmp_track_link=ot_faqs/top_issues/en_u...
    Let me know if this was usefull by clicking on the Kudos button.
    I work for HP.
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    Click the KUDOS STAR on the left to say “Thanks” for helping!

  • HP PSC 1210 All-in-One Printer -- need Software (scanner directory), for windows 7 (64) bit

    hi,
    I am kind of done with this Printer ! lost hope in customer care and support hit with HP ! from Past 10 days searching a software to scan few doc from  my printer 1210 (HP PSC 1210 All-in-One Printer) but i dint find.... i got one from some source (166 Mb) file, but to my surprise its not compatable with Windows 7.  i am totally depressed now.... Please help me to find software for this (scanner document) I have lost the CD lont time back can i download This some where?

    Hi there,
    I understand you're looking for drivers for your PSC 1210 on Windows 7. I will certainly do my best to guide you in this issue.
    At this time there are no HP drivers available for this printer for Windows 7. You can still use the printer with Windows 7, you will just have to use the drivers available within Windows 7. That document will walk you through what you need to do in order to get printing again, and will also show you how to scan with this Windows driver.
    Hope this helps, have a great day!!
    Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    **MissTeriLynn**
    I work on behalf of HP

  • Can I share HP PSC 1610 All-In-One series printer through Bonjour?

    I have an iBook G4, and a Mac Mini (10.4.11- Tiger) with a HP PSC 1610 All In One series printer connected to it by USB. On my iBook G4, the printer comes up under Shared Printers in the Printer Setup Utility but when I click on it, and press Show Info it freezes.. so I was wondering, is there a way to connect to the printer wirelessly with the correct driver (because the driver doesn't show up in the driver list... and the driver is installed.)

    Hi my printer psc 1610 hp not picking paper

  • HP psc 950 all-in-one is printing half the page...cuts off the top portion of what I am printing.

    HI!  My HP psc 950 all-in-one is printing half the page....cuts off the top portion of what I am printing.  Not sure what happened to the printer.  Came home one day and the printing wasn't the same.  Possibly the kids could have fiddled with it but no one is owning up to it.    Any solution to get the printer printing normal again?
    Thanks
    -L

    Hi there,
    Could you provide the community with a little more information to help narrow troubleshooting? What operating system are you using?
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • HP PSC 1210 all-in-one pen failure issue

    I have an hp psc 1210 all-in-one printer and recently replaced both print cartridges.  Then, when I went to print it said that i had a pen failure.  I then discovered online that this could be because of dirty cartridge contacts, so I cleaned them as instructed.  After allowing them time to dry, I returned them to the printer and plugged it back in.  However, now the printer will not turn on at all.  What is wrong with my printer?

    Hi,
    What application you are scanning from? is it Paint or Windows fax and scan?
    Can you see the same behavior while using any of those options?
    You may find the exact steps to scan on Windows 7 with the PSC 1210 within the FAQs section below:
    http://h10025.www1.hp.com/ewfrf/wc/document?docnam​e=c01796879&cc=us&dlc=en&lc=en&os=4062&product=907​...
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Hp psc 1210 all in one printer feeding error

    I have a model 1210 all in one printer and it will not feed paper. it sounds like something its working, but not gripping the paper. PLEASE ADVISE

    Hello @anne0701 , and welcome to the HP Forums!
    I can see you're experiencing paper feed issues.  I would like to help!
    I would recommend performing a  power reset.  Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
    I would also suggest following the steps in this video on PSC feed issues:
    Fixing Paper Pick-Up Issues - HP PSC 1200 All-in-One Printer
    Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • HP Psc 1410 all in one series Printing pink

    Printer - HP Psc 1410 all in one series
    Operating system - Microsoft windows Vista 32 bit
    Ive installed the driver and the software but when i print colour the colour is pink. When I print in black and white it prints fine jsut colour is all pink.
    Jamie

    Please click here for a possible solution to your problem:
    http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&dlc=en&cc=us&product=441115&docname=c00313147
    Let me know if that helps.
    Please click on KUDOS if you find my solution helpful.

  • Installing software for my HP psc 1210 all-in-one printer on to my Mac?

    I have downloaded new software and drivers for my all-in-one printer. I am running OS X 10.5.2 on a 20" 2.16 GHz Intel Core 2 Duo. The computer recognises that a printer is present and I can print with no problems. The problem that I'm having is with the scanner function. I don't think that the HP software is registering that there is a printer present. When I go into the HP setup assistant no printer comes up in the selection window. When I go into Printer & Fax via system preferences the HP psc 1210 series comes up as the default printer. I've had this problems before but cannot remember how I rectified it. I'm sure it got something to do with erasing the driver's off the computer and starting over again. Can anyone please help me or point me in the right direction. Thanks

    Hello,
    Here is a link to a support document on hp.com on how to install on OS X Mavericks.
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03967522&tmp_track_link=ot_faqs/top_issues/en_u...
    Let me know if this was usefull by clicking on the Kudos button.
    I work for HP.
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    Click the KUDOS STAR on the left to say “Thanks” for helping!

  • My HP psc 1210 all-in-one, suddenly stopped printing any text. it will print the graphics.

    I believe I have tried everything. The HP psc 1210 series all-in-one refusses to print text. nor will it scan or copy. I have done all the troubeshooting that I can find. Still will not print from PC or copy. I think it will scan to the computer. Icon with gray circle around it, states it is offline, yet from the control panel, printer and faxes, shows it as being online and ready. What else can I do to remedy this problem? Thank you in advance.

    There may be 2 separate issues here.
    -For the offline portion, check this document out:
    Printer is offline
    -For just printing graphics, this would make me think that the Black cartridge is empty/low on ink/malfunctioning. Try printing a black and white picture. That would let you know if it is the cartridge or not.
    007OHMSS
    I was a support engineer for HP.
    If the advice resolved the situation, please mark it as a solution. Thank you.

  • HP psc 1210 all in one - software update help

    Hello
    I bought a new Dell laptop . Windows 8.1, 64 bit. The software with my 10 year old all in one is not compatible. I do not understand drivers and software needs. Do I need both updated?  How do I proceed? Thank you, Tom

    Hello, 
    All you have to do is to connec the printer to the Windows 8.1 PC and the in-OS driver will be installed.
    There is no fullfeature driver software available for Win 8.1 PC.
    Regards,
    Jabzi
    Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
    Click "Accept as Solution" if it solved your problem, so others can find it.
    Although I am an HP employee, I am speaking for myself and not for HP.

  • PSC 1210 All in One and Windows 7 64 bit

    Will Vista 64 drivers work for PSC 1210 on WIndows 7 64 bit?

    Avin wrote:
    Will Vista 64 drivers work for PSC 1210 on WIndows 7 64 bit?
    The PSC 1210 drivers are available from Windows Update, see here.  You can go to the Printers folder, Add Printer, Local Printer, LPT1:, Windows Update.  It will take a few minutes to load the updated set of drivers.  When the updated list appears cancel the installation, then connect the USB for the PSC 1210 and it should automatically install.
    If you do not have a high speed internet connection the Windows Update process may be prohibitively slow.  In this case you can use the Microsoft Catalog Site to select just the drivers you need.  Unfortunately it can be difficult to find the specific drivers as there is no apparent way to search for the x64 drivers automatically, you will need to click on the titles and read the description to see what architecture the particular driver supports.  The Microsoft Catalog site requires IE, it does not work with other browsers.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Maybe you are looking for