Hp psc 1300 series all in one driver

my hp 1300 series printer is not having drivers, i have tried in many ways. but useless effort. At last i came here for all of our friends support, those who are using these above hp 1300 series all-in-one printers. friends please help me in this issue to get a driver for my printer. Thanking you all.

Hi talamala,
if you go to the link below, and under "detect MY Product" on the right, click find now, this should hopefully identify the driver you need
http://www8.hp.com/ie/en/drivers.html
if that doesn;t work, please let me know what OS you are using and the exact model number of your printer I think psc 1300 is the series number not the model number.
regards,
Na-Vi
I am an HP employee, I am speaking for myself and not on behalf of HP.
Click the thumbs up to say "Thanks." Mark Accepted Solution on the post that solves your problem

Similar Messages

Unable to connect my 1300 series all in one printer

the connect and update buttons from the pull down menu are disabled and i don't know why or how to enable it again. I have one print job in queue that will not restart!!!! please help. thanks in advance!

Greetings pbdq,
As the user above stated, you should remove the previous software used.
When you go to re-add the printer, it may download the software you need via Apple Software Update.
However, if it does not, use the link above.

HT1338 is there a driver for Lexmark X1100 Series All-in-one?

Is there a driver for Lexmark X1100 Series All-in-One ?

Hi,
Might try this...
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-53118-1 &lc=en&cc=us&dlc=en&product=1146331&os=219&lang=en

Windows 8 problems 2575 series all in one

Recently I bought a new laptop which runs Windows 8(64-bit) and when I tried to install the software required to run my printer (2575 series all in one) I couldn't because the software wasn't compatible with windows 8.
Is there any way for me to install a driver, an emulator or some kind of software that would allow me to accses my printer?
Edit: sorry, accidentaly double posted somehow.

The HP 2575 is compatible with Windows 8
Go to this site, Drivers and Software, Select your OS and download the Full Feature Software and Drivers.
http://support.hp.com/us-en/product/HP-Photosmart-2570-All-in-One-Printer-series/441247/model/441248...
Please mark my post as SOLVED if it has resolved your problem. It helps others with similar situations.

After upgrading to mavericks how can I connect my HP PSC 2510 photosmart all-in-one printer to my mac?

After I upgraded my macbook air to mavericks, my HP PSC 2510 photosmart all-in-one printer doesn't connect to my macbook air. When I try to launch the all-in-one installer from the HP CD that came with the printer, I get a message saying it cannot open because powerPC is not supported. The HP site has not been helpful in resolving this issue. My understanding is I first must connect the printer to the wireless system (I use airport extreme) before using airplay for printer software upgrade.

Your suggestion is helpful, but after some digging on the HP site I found a detailed solution to my problem. The link is: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01749025&tmp_task=setupCate gory&cc=us&dlc=en&jumpid=reg_r1002_usen_c-001_title_r0001&lc=en&product=303770

Computer dies when connecting Double Dragon All-in-One Driver

I connected a DVD drive with the Double Dragon All in One Driver, via it's USB cable, to my Toshiba Satellite T115 S1100. I have done this numerous times before and there has been no problem. On this occasion I moved the power cable from the DVD to the power socket on the unit and as I inserted it the computer hard drive clicked and the computer went dead. It is now as dead as 'a dodo' and I assuming that there has been a power surge through the USB cable. Does anyone have any thoughts or have I 'toasted' the motherboard or some other part of the computer? Many thanks Peter
Solved!
Go to Solution.

I contacted Toshiba, who were very helpful but were unable to suggest a solution, without seeing the machine.
However, I took the battery out, whilst I was working on another laptop. When I returned and placed the battery back in, lo and behold, it came on and seems to be unaffected by whatever happened. So many thanks to anyone who may have viewed this blog, but the issue is solved. Peter

Download deskjet f380 all in one driver and printer

windows 7 64 installed on my computer sucessfully.
i was downloading hp deskjet f380 all in one driver and software off HP website and
lost electricity to computer before completed. Then computer tried to recover
cleanupprogress rollback and was removing unnecessary components and the computer
appeared to be working but stuck at 45% progress for 2 hrs. obviously something is wrong.
any ideas what to do?

Hello there Beezntrees,
We have a great many bundles that offer our customers some savings when in need of purchasing multiple devices. With so many options to choose from, our sales associates should be able to direct you in the right direction to get you set up with devices that meet your needs. It is discouraging to hear that it took a few visits to the store with a couple exchanges to get you to where you should have been left after one.
I am glad to hear that you were able to speak with a manager at the store, and that she offered you a resolution to this experience. I have some further information for you, which I would like to provide to you in a private message. You can check your private messages after you have signed into the forum by clicking the envelope icon in the top right corner of the page.
Sincerely,
Tasha|Social Media Specialist | Best Buy® Corporate
Private Message

Hp psc 1350 all-in-one driver download issues

Hello
I have a Toshiba laptop and an hp psc 1350 all-in-one printer. Both were working well until Sunday. Now the printer will not work.
The on light of the printer is constantly on when attached to power, I can press the on button so it doesn't appear to be broken, but the light will not turn off.
When I remove the power cord the lights cycle through the printer panel (and the on button light does go off momentarily) then the on light stays on and will not turn off.
I have been unable to download the latest driver update from Windows Update or any websites automatically or manually - TOSHIBA USB DVB-T/Analog Hybrid Tuner (391 KB). The download always fails. I also tried the FixIt facility from Microsoft, but it tells me there are no issues.
Does this mean the driver is the issue, or do I have to purchase a new printer?
Thanks for your help.
This question was solved.
View Solution.

Hi Gerri_31,
I understand you aren't able to shut down the printer with the power button.
Thank you for your reply.
I will be happy to help you with this.
I would do a power reset to see if that will resolve the issue. With the printer still turned on, disconnect the power cable from the back of the printer, hold the power button for 10 seconds to drain any power, if the printer has external power module with a detachable power cord disconnect it for 15 seconds and then reconnect it. Then disconnect the power cable from the wall outlet. Wait 10 seconds and reconnect the power cable back to the wall outlet first, then the back of the printer and power it on again.
Make sure the printer is connected directly to wall outlet. (don't use a power hub or a surge protector)
I have provided a document for power issues.
The HP Printer Won't Turn On or Respond.
If these steps don't resolve the issue I would recommend to call HP Tech Support for
further assistance to see what other options are available for you or to find out about
the trade in and trade up program.
Contact HP Worldwide.
Hope this helps.
Thank you for posting on the HP Forums. Have a great day!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP PSC 1410-v All-In-One - Doc. failed to print

My HP All-In-One 1410-v printer works fine most of the time. However, it used to print my paycheck stub from Intuit's Payroll Website. Suddenly it refused to print that information. it will print the first three lines and then I receive an error message on my computer in a pop-up box that says:
The Document failed to print
Document Neme: FLASH
Printer Na: HP PSC 1400 Series
Time Sent: (the current time)
I have talked to Intuit.
My printer prints everything else fine.
I tried downloading the information to Adobe (an option available from the site) and then printing it from Adobe; I receive the same message.
I had an unrelated computer problem and my hard drive was wiped clean. I reinstalled printer from CD. Still will not print this document.
I downloaded the check utility and the check indicates I have the most up-to-date driver.
I don't know what else to try. Anyone have (and solve) this problem? Ideas? Suggestions?
Thanks

My previous post corrected:
This works successfully (OpenPrinting/MacOSX/hpijs) BUT when I originally installed it, it would only print in colour i.e. it only used the colour cartridge to print, even to print black/white or greyscale. I solved the problem - I thought - using the advice from http://tech.ifelix.net/1300.html even if my printer was on the "compatibility list".
However, I recently installed the latest version of the OpenPrinting software http://www.linuxfoundation.org/en/OpenPrinting/MacOSX/hpijs#Printers to find that I have reverted to the colour cartridge only use! I don't seem to be able to resolve the problem this time around. Can anyone help?

PSC 1410 printer all in one

I have a Hp PSC 1410 all in one printer wired to my desktop. How can I use it with my wireless laptop. Its on there but when i click it is is offline and I cant change it to online. Can use it fine on the desk top but I had anew hard drive pit in my desktop last week and since then something has changed that I cant get my printer to be online. on my laptop. Hp helped me set it up on my laptop when I got the laptop but now they wont help me as they say this printer has no support. I dont believe that. Wanted to sell me a new printer which i refused as this printer works fine.
Anybody know an answer to this problem?

Do you have the printer wirelessly connected to your network or ethernet connected to a router?
If so, then you should be able to print from the wireless notebook.
If you just replaced the harddrive, then it may be necessary for you to perform a new install of this printer. I would uninstall the old software and re-install with the most up-to-date drivers available here.
Hope this helps.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
I am not an HP employee.

LENOVO C SERIES ALL IN ONE DESKTOP PC

Hi...Im new to this site and just wanted to ask a question,
I bought a lenovo all in one c series pc..Only a few days ago,
I got it home and booted it up as you do,
Then it went to mircosoft updates and found 45 updates....So it downlosaded them and it went to reboot but all i got was a blank black screen with just the wireless light and the power light on...
Any ideas to what is happening ?....
Im from the UK if that helps
Rob

I have had the exact same problem and it is confirmed it is down to the Intel GMA 3150 update that Windows Update installs for you.
I recommend you print or write the following instructions down before doing them as restarts are required throughout the process.
If the Intel GMA 3150 update has been installed you'll find your computer will go blank once it's loaded into Windows. There is an update available from Lenovo that I'll explain about below, but first you need to uninstall that update that is causing the problem. Press the power button on your Lenovo All-in-One for it to automatically switch off. Then turn your computer on again. AS SOON AS YOU SEE THE LENOVO START UP SCREEN, continue to press the F8 key until you see many options listed on a black background with white text (basically keep pressing the F8 key for 5-10 seconds when you see the Lenovo bootup logo). The reason for this is because the F8 key is registered just after the Lenovo bootup logo. If you don't see anything on your screen within 10 seconds, your display may be turned off even though the power is on - press the button next to the power button on your display to turn it on, and you should see the options I described.
Now use your Arrow Key on your keyboard to select Safe Mode (choose the first option) and it'll eventually boot into Windows. Then go to the Start menu, right-click on Computer and select Properties. Then from the new window that'll appear, select Device Manager from the left hand side. Then in the newer, smaller window, double-click under "Display" and find the Intel Graphics Media Accelerator option - right-click on it and select "Uninstall". Make sure from the next window that pops up you select the checkbox to delete the files relating to the driver. It will probably ask you to restart your computer at this point. Your computer should boot up into Windows as usual but everything will appear bigger than usual.
When you're logged into Windows, go to the Start menu, search for Windows Update and launch the program. From the left of the new window, select "Change settings" and where it says "Important updates" there's a drop down box; choose "Download updates but let me choose whether to install them". This is a temporary measure to ensure the Intel GMA 3150 driver isn't reinstalled until we install the update from Lenovo that fixes this issue.
Now, this blank screen issue has been rectified by Lenovo in the form of a software update that is available from http://consumersupport.lenovo.com. From there enter your serial number (found on the back of your computer) - or alternatively select the option that starts at the top of the list of Lenovo computers - for instance, my All in One is Lenovo C200 so it's listed as "3000 C200". From there, find the BIOS update that can be installed via the operating system which is at the top of the list of the drivers available. Download the .exe file, run the application for it to install itself and then restart your computer once it is installed. Then go back to the downloads page at http://consumersupport.lenovo.com and also download the second file which has a .txt extension (I believe); these are the instructions. Follow the simple instructions. Once you have followed the instructions you'll see it asking you to enter any key to restart. For me it didn't restart the computer so I had to do this manually by pressing the Windows key on the keyboard which opens the Start menu and using the arrow keys to get to the Restart section of the Start menu. Once your computer restarts, go back to Windows Update and change settings back to "Install updates automatically". Now click OK and then back at the left section select "Check for updates". Once it has checked for updates click on the "important updates available" link in the Windows Update window and find the Intel Graphics Media Accelerator option (if you can't find it, from the left select "Optional", it should be in there instead. Whichever one it is in, make sure all updates are DESELECTED in both Important and Optional and then go back to whichever section the Intel Graphics Media Accelerator Update is in, and select that update, then click OK from the bottom right and go ahead and install it. Once it is installed, you'll find your display goes black. Don't worry at this point, this is the update installed. Wait 1 minute and then press the power button for 3 seconds for your computer to turn off (once you press the power button it'll take a few seconds to turn off). Turn on your computer again and you'll find it boots back into Windows fine with that Intel update that previously caused a blank screen at start up. Everything is now done and the Intel update is now installed. The reason it causes a black screen after it is installed I don't know, but after turning off/on again, everything works fine - since the BIOS update has fixed the blank screen at start up problem.
Hope this helps. I know it's in depth, but it shouldn't take too long. I'm a customer and not a staff member at Lenovo, by the way and I did everything I described above when I had the same problem. A Lenovo staff member over the phone did explain about the Intel GMA driver causing problems when I called for an unrelated problem and then it happened to me later on, realising it's the Intel GMA driver that Windows Update installed.
My personal tech blog

HP PSC 1300 Series printer does not print the entire last line on page

Using an HP PSC 1310 series printer (1315xi I think). Just changed computers and OS from winXP to Win7 Professional. Now the very bottom line on my checks only shows the top 10% of that last line. There is a 1-inch margin at the bottom of 11.5" LETTER paper. There is no problem if I use another printer (HP PSC 1210xi). Is there an updated 1310 series driver that wasn't automatically selected by Win7Prof when I switched computers?

I see no way to adjust the margins on the printer. When I click 'Printer Properties - Effects' the Margins area has nothing I can change and even though there is a box to Minimize Margins, it cannot be clicked. Using the Resizing Option to reduce page to 95% does not pull the last line into the printable area. I can print the file to PDF using doPDF v7 and then see the printable white area that goes just under the last line when I choose the 1210xi printer, but when I select the 1300 series printer the white area moves slightly upward just above most of the last line to be printed. I can't choose the pdf selection to fit or shrink to printer because that distorts the page on my pre-printed checks, so I must choose Page Scaling as 'None'. My checks printed fine on the old computer with XP and using the same PSC 1300 printer. I've also tried to print to another printer that prints the last line with no problem.

HP PhotoSmart 2575 All-In-One Driver/Software Install Issue - Windows 8.1

Hi
I've just bought a new Sony Viao with Windows 8.1 (64 bit) installed.
I'm trying to install my HP PhotoSmart 2575 All-In-One so downloaded the driver and software installer from here:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-110159-1&cc=uk&dlc=en&lc=en...
The file downloaded fine on to my desktop, i double click it and then the Exctracting... thing moves along to 100% then goes off the screen. Then nothing happens. I was expecting some software for the printing and scanning to be installed or some further install files to be added to my desktop.
What do i do next?
Matt

Hi Matt,
Thank you for updating me. I can definitely understand the frustration you must be feeling, especially when things seemed to be going great then it changed.
I have 2 documents to follow next. First, please try the steps in the document titled "Software Installation Stops Without Warning and With No Error Message". When you get to "Step three: Install the Software", it references HP SmartInstall. Please don't worry about using that program as it's specific to some of HP's LaserJet printers. Please use the HP's Printer Install Wizard instead of HP's SmartInstall.
If that document doesn't resolve the issue then please proceed onto the 2nd document titled "The Progress Bar on the Software Installation Stops or Stalls".
Please let me know how it goes. I want to ensure we have your printer installed and working.
Software Installation Stops Without Warning and With No Error Message
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c02018709
The Progress Bar on the Software Installation Stops or Stalls
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c00836418
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

All-in-one driver installation fails under Windows 7

I am trying to install the all-in-one printer driver for Windows 7, 64-bit, Service Pack 1. I have downloaded the installer from HP (AIO_CDB_Net_Full_Win_WW_130_141.exe), downloaded it using HP Print and Scan Doctor 4.3 and using the HP Printer Install Wizard (hppiw.exe). All methods fail. My computer is a new Dell Inspiron (Intel i5-4440 @ 3.1GHz, 8GB RAM, 64-bit OS). The printer I am installing for is a HP 6310, which is old but which has worked well for years under Windows XP. I don't think the printer is an issue since the installer never reaches the point of scanning for hardware.
Symptoms:
Installing using the downloaded installer, the initial splash screen displays. Selecting "Install" displays a second screen with several progress indicators beginning with "Checking system...". After checking for a few seconds, an error box pops up complaining that it can't find a file named "hpzpnp.ice_suffix..exe".
There are two files in the Setup directory named "hpzpnp01.exe" and "hpzpnp04.exe". The Autorun file contains many references to an %ICE_SUFFIX% environment variable.
I guessed that the installer executables did not have enough privelege to set environment variables, so I went through the installer directories and set all the executables to run with administrator privelege.
After that, running "Setup.exe" from the top of the install tree, the initial splash appears, followed by the second "checking system..." progress display. Then a new window with advice about keeping firewalls turned on, etc. pops up. Continuing from that point pops up a new error box saying:
"The specified path is too long C:\Program Files (sLar dig mer med hjalp av en demo pa skarmenHitta enkelt dina foton med onskad metod-Datum, Markning, Mappar, Sok, Favoriter)\HP\."
I have done this multiple times, and the parenthesized phrase (Swedish?) is sometimes different, but always wrong. It looks to me as though the installer is trying to decide whether to install 32- or 64-bit drivers, but can't decide which. It fails to initialize a string variable and concatenates garbage onto the "C:\Program Files" path string.
I have also seen an error box with the following error near this point:
"C:\Users\Sid\AppData\Local\7zS4689\Setup\hpzrein01.exe" "-wStub" "3...
"The parameter is incorrect."
Clicking OK on the error box aborts the installation.
Installing using the HP Printer Installation Wizard produces the same error message as the initial attempt with the downloaded installer about missing files with names containing "ice_suffix".
Installing using the HP Print and Scan Doctor progresses as far as the "path is too long" message.
I've done this now many times, trying different things, without success. After each attempt, I run the Uninstall_L4 utility in utils\ccc under the installer tree, then run the OS Disk Cleanup utility. Following an earlier post, I installed the latest version of Flash Player, with no change in symptoms.
Any fresh ideas would be much appreciated.

Hi ehildum,
Thank you for the time and effort you put into your post. I can see you have done plenty of troubleshooting on your own, but I do have an idea.
If the USB cable is plugged in this could be causing issue. Assuming it is connected, let's unplug and take a look at the Device manager. The hpzpnp.ice_suffix indicates a plug and play 'pnp'.
Follow these steps and let me know what happens.
Click on Start
Right click on Computer
Select Manage
On the left panel, click on Device Manager
Click on View at the top and select Show hidden devices
Look in the list for Other devices
If you see the printer here, right click and select uninstall
Look in the list and click on the arrow next to Printers
If you see the printer here, right click and select uninstall
Delete all files in the %temp% folder
Restart the computer
Open the installer from your download (AIO_CDB_Net_Full_Win_WW_130_141.exe)
Do Not plug the USB cable in until the software says so.
Please let me know the outcome of these efforts. If your USB cable was not connected please complete the above steps anyway to see if there is something stuck in the Device manager that could be causing the conflict.
I look forward to hearing from you.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

C6280 All-in-one driver for windows 8.1 - unalbe to select automatice 2 sided printing

I downloaded and installed the driver and full photo print for my old all-in-one but now I don't have the option for automatice two-sided printing.
Is there a different driver specifically for the C6280 printer I can download?
pennyph

Hi @pennyph,
Thank you for visiting the HP Support Forums! I see you have recently installed the full feature software and drivers for your HP Photosmart C6280 and now you do not have the option for two sided printing (Duplexing).
I would like you to start here: Printing on Both Sides of the Paper (Duplexing) in Microsoft Windows
Please make sure you have enabled the two-sided printing module (duplexer):
1. Go into the Printers and Faxes folder.
2. Right-click the device.
3. Click Properties (not Printing Preferences).
4. Open the Device Settings tab.
5. If the duplex unit shows Not Installed, click Not Installed.
Change it to Installed.
The Automatic selection is added to the list of Two-sided printing options in the Printing Preferences (not Printer properties).
I hope this helps! Let me know if you have anymore questions.
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Hp psc 1300 series all in one driver

Similar Messages

Maybe you are looking for