HP PSC 1315 - need help for a XP and Vista network

Hey all,
I need some help to set a HP PSC 1315 All in one Printer:
First, this printer is for the moment, correctly installed using USB on a desktop computer using XP. It works fine.
But now, I have a second PC, a laptop, which is using Vista, and I would like to share the printer through the local network to be able to use it on the laptop (which is connected to LAN by Wifi).
I tried to run the original printer CD on the laptop, but of course it didn't work on Vista. I'm downloading vista drivers, to try them Tuesday. In your opinion, will it work? Do I have to share the printer on the XP PC and will I be able to print documents on the printer trough the LAN using wifi ?
Thanks a lot.

Is there a reply to this question dated back in 2009? I am now having the exact same problem and have not been able to figure it out! I have a desktop running xp, and the printer works fine connected to it. I want my hp notebook, running vista ultimate to print wirelessly through our brand new dsl modem.
I've done all the fixes I can find...how did you finally get it? or did you buy a different printer like I am considering?
Thanks!

Similar Messages

Need help for drill up and down with sum urgently !!

Hi everyone,
I'm now using Discover plus but I've got problem with using drill up and down.
exp)
now
shop
L supplyname
L $600
Jancode1 ---sum $300
L aaaaa-------$100
bbbbb-------$200
Jancode2---sum $300
aaaaa-------$100
bbbbb-------$200
want to do
shop
L supplyname
L $300
Jancode1 ---sum $300
L aaaaa-------$100
bbbbb-------$200
Jancode2---sum $300
Laaaaa-------$100
bbbbb-------$200
as showing exsmple,
the sameitem(Jancode) value are same area and sum is separetated as correctly then do drill up, but the reslut of sum is 600 which I don't want the double result like example. I want to make correct result(sum) such as 300 which means not summing double item value as 1item value.
does anybody know what I should do with it or has any idea for it??
I really need it know ASAP if it possible to do it or not and also if I can do,
please tell the how to do it.
Thank you for reading.

Usually you can tailor your antennas to the coverage pattern you need. AP placement, antennas, and power level are best determined pre-install by a good, comprehensive site survey.
It may be possible to change your antennas to higher gain types (i.e., 180 degree patch or sector antennas instead of Omnidirectional rubber ducks).
Be advised though that changing to higher gain antennas will also change their coverage pattern; you might reach farther in one direction but less in another. Each antenna should have a chart that describes the side profile and overhead profile of the radiation pattern.
Running in mixed mode (b & g) will reduce your throughput, but it shouldn't affect your range. The brief version is that it takes time to switch modes, and the AP has to notify clients on one protocol that there's activity happening on the other protocol ... it all takes time & bandwidth.
Both are the same frequencies and have the same basic coverage.
CCX (Cisco Client Extensions) should not affect your client's range or throughput; they are extensions - if you don't use them, they are pretty much ignored.
Each vendor has there own "formula" for when to roam to the next AP. Some vendors use Inter Access Point Protocol (IAPP) to communicate between the old AP and the new AP so the handoff happens in a coordinated fashion. Using a single vendor for all of your APs (at least in the same / adjacent neighborhood) increases your chances of a smooth handoff.
Good Luck
Scott

Need help for displaying key and description in Dropdown (ABAP WEBDYNPRO)

Hi Experts,
I am using dropdown as a table field. For this dropdown I want to display the value as well as description.
In ALV table when we create a dropdown dynamically in table field, there is a method SET_KEY_VISIBLE in class CL_SALV_WD_UIE_DROPDOWN_BY_KEY.
But I think we cannot use similar method for normal dropdown field in table.
Is there any way we can display both value and description in dropdown value set ?
Please help.
Regards,
Anand

Hi,
I think there is no such option. You need to consider one variable type string and while populating the
valueset fill this variable by concatenating the value and description and assign it the key and value
pair of the valueset.
DATA:
lt_value_set_ctry      type table of wdr_context_attr_value, " Country/Service Location
lv_str type string.
    loop at lit_country into ls_country.
      concatenate ls_country-value ls_country-text into lv_str separated by space.
      ls_value_set-value = lv_str.
      ls_value_set-text = lv_str.
      append ls_value_set to lt_value_set_ctry.
      clear ls_value_set.
    endloop.
      lr_node_info->set_attribute_value_set( name = 'COUNTRY'
                 value_set = lt_value_set_ctry ).
Consider this lit_country is a text table for countries.
Regards,
Lekha.

Need help for HDMI, USD and Ethernet example SoC for VC707

I'm developin an SoC with HDMI, USB and Ethernet interfaces.
In this USB and Ethernet interfaces are not working.
Can i get any example SoC's for above mentiones IPS.

bump ... nobody has anything helpful to post ?
Am I trying to do something that is not possible with the open source driver ? start a game in wine 32bit?
Or maybe the problem is in one of the libraries ?
I did mess around with the catalyst before, but the 2d was so bad that I decided not to even try the 3D watching a movie was impossible at a decent fps O.o
And I do believe that I removed all and re-installed Open Source libraries + drivers properly. Is there a definitive way to check ?

Need help for create A and MX records (home server)

What should I put in the DNS (A record, MX) to be able to receive email from my provider Godaddy and send emails directly from my server without passing through Godaddy.
The server is "home server" and it is not always access (open).
Incoming Mail: from Godaddy
Outgoing Mail: form my server

Hi,
Based on my knowledge, the default receive connectors are automatically created when the Exchange server is installed. Then the internal and outbound mails can delivered properly through Exchange server. After we create send connector and add public MX record
and A record on the public DNS server, the inbound mails can be delivered. And we can set the send connector with MX record, then the inbound mails are directly delivered by Exchange server.
If you have any question, please feel free to let me know.
Thanks,
Angela Shi
TechNet Community Support

I have problem with buying in games , I got the massage that the purchased can not be completed , please contact iTunes support.. I need help for my case please

I have problem with buying in games , I got the massage that the purchased can not be completed , please contact iTunes support.. I need help for my case please

http://www.apple.com/support/itunes/contact/

Need help for Format HD

Hi I need Help for Formating HD so Wat Key need hold on start up for format HD I apprciated you Help

Jesus:
Formatting, Partitioning Erasing a Hard Disk Drive
Warning! This procedure will destroy all data on your Hard Disk Drive. Be sure you have an up-to-date, tested backup of at least your Users folder and any third party applications you do not want to re-install before attempting this procedure.
• With computer shut down insert install disk in optical drive.
• Hit Power button and immediately after chime hold down the "C" key.
• Select language
• Go to the Utilities menu (Tiger) Installer menu (Panther & earlier) and launch Disk Utility.
• Select your HDD (manufacturer ID) in left side bar.
• Select Partition tab in main panel. (You are about to create a single partition volume.)
• _Where available_ +Click on Options button+
+• Select Apple Partition Map (PPC Macs) or GUID Partition Table (Intel Macs)+
+• Click OK+
• Select number of partitions in pull-down menu above Volume diagram.
(Note 1: One partition is normally preferable for an internal HDD.)
• Type in name in Name field (usually Macintosh HD)
• Select Volume Format as Mac OS Extended (Journaled)
• Click Partition button at bottom of panel.
• Select Erase tab
• Select the sub-volume (indented) under Manufacturer ID (usually Macintosh HD).
• Check to be sure your Volume Name and Volume Format are correct.
• Click Erase button
• Quit Disk Utility.
cornelius

Need help for my requirement...

Need help for my requirement...
Hello Experts,
I have report where users can input the company, housebank, account ID and posting date.
Now in one column of my report named 'Cash in Bank', I need to get all postings from cash
accounts with GL code ending in '0'. Now, I know that I can get the amounts in BSIS/BSAS
but how do I link it with the proper bank and account?
For example:
                   Cash in Bank
Bank A
Account ID 1     1,000,000
Account ID 2     25,000,000
Hope you can help me guys. Thank you and take care!

hi Viraylab,
each house bank you can find in table T012, in T012K you'll find the bank accounts to the housebank, the G/L account will be in T012K-HKONT.
hope this helps
ec

Need help for flash builder

i need help for flash builder 4 and papervison 3d. I need to create a slider with it ranges of value from 10 to 50 to adjust the camera values for the camera.fov and also need to create it for the yaw of the object from 0 to 360. I try to look for any slider event and classes in this program but cant find any, btw, i need to use the AS only project file.
here is my codes:
can you please tell me how i should modify the codes?
package
    import flash.display.BitmapData;
    import flash.display.Sprite;
    import flash.events.Event;
    import org.papervision3d.materials.BitmapFileMaterial;
    import org.papervision3d.materials.BitmapMaterial;
    import org.papervision3d.objects.primitives.Sphere;
    import org.papervision3d.view.BasicView;
    [SWF (width="800", height="600", backgroundColor="0x000000",frameRate="30")]
    public class EarthBitmap extends BasicView
        private var sphere:Sphere;
        public function EarthBitmap()
            super(800 , 600);
            var earthmaterial:BitmapFileMaterial = new BitmapFileMaterial("../assets/Earth.jpg");
            sphere = new Sphere(earthmaterial,100,20,18);
            camera.fov = 25;
            scene.addChild(sphere);
            addEventListener(Event.ENTER_FRAME,rotateSphere);
        public function rotateSphere(evt:Event):void
            sphere.yaw(0.2);
            singleRender();

Turn the click handler into a full on separate function. Then store all the views in an array and use Math.rand() to randomly choose one.
Something like this:
<fx:Script>
     <![CDATA[
          var questionsArray:Array = {question2,question3,question5,questionRed,questionGeography};
          function buttonClickHandler(event:MouseEvent){
               var randomProblem:int = Math.floor(Math.random()*(questionsArray.length));     //generates a random integer between 0 and the total number of questions in the array (arrays are 0-based)
               navigator.pushView(questionsArray[randomProblem]);
     ]]>
</fx:Script>
<s:Button id="randomProblemButton" label="Next Problem" click="buttonClickHandler(event)" />
Haven't tested that, but something along that line should work

Need help for importing oracle 10G dump into 9i database

hi, Someone help me to import oracle 10G dump into 9i database. I'm studying oracle . Im using oracle 10G developer suite(downloaded from oracle) and oracle 9i database. I saw some threads tat we can't import the higher version dumps into lower version database. But i'm badly need help for importing the dump...
or
someone please tell me the site to download oracle 9i Developer suite as i can't find it in oracle site...

I didnt testet it to import a dump out of a 10g instance into a 9i instance if this export has been done using a 10g environment.
But it is possible to perform an export with a 9i environment against a 10g instance.
I am just testing this with a 9.2.0.8 environment against a 10.2.0.4.0 instance and is working so far.
The system raises an EXP-00008 / ORA-37002 error after exporting the data segments (exporting post-schema procedural objects and actions).
I am not sure if it is possible to perform an import to a 9i instance with this dump but maybe worth to give it a try.
It should potentially be possible to export at least 9i compatible objects/segments with this approach.
However, I have my doubts if this stunt is supported by oracle ...
Message was edited by:
user434854

Need Help for Nokia 6500 slide

Hi all I'm A new Guy here ,
But I do really need help for hard reset my phone
I already try *#7073# But It doesn't work ,
If Anybody know to make a hard reset please help

rwss wrote:
I'v got te same problem with my 6500 Slide, is there a button combination that we have to press
to hard reset the 6500 Slide?!
How does the 6500 slide hard reset?
That's simple.
All you have to do is:
From MENU goto SETTINGS, When there scroll down and select 'Restore Factory Setting'.
There are two options in there:
"Restore Settings only"
and
"Restore all"
Select "Restore All"
When done the phone will delete every thing on the Phone memory(C:\)(contacts,picture,messages etc)
and also restore phone to its original settings and will restart.
This proceedure is mostly common on S40 phone.
Hope this explain and solve the problem.

Need help for publishing web intelligence document (universe) into InfoView

Post Author: mirage
CA Forum: Publishing
Hello all,
I need help for publishing web intelligence document (universe) into InfoView.
can't find this information in Business Objects Designer's Guide and in Business Objects Administrator Guide.
Can somebody give short instructions how can I do it?
Regards, Slava

If the change between the 2 types of data has to happen dynamically during run time them
1. Use 2 dataproviders
a. Current
b. Historic
2. Merge the 2 dimensions
3. Use Webi variable to switch between the measure of the current and historic universe
Ex if [year] < 2010 then historic.[expense] else current.[expense]
Hope this helps,
Divya

Need help for access list problem

Cisco 2901 ISR
I need help for my configuration.... although it is working fine but it is not secured cause everybody can access the internet
I want to deny this IP range and permit only TMG server to have internet connection. My DHCP server is the 4500 switch.
Anybody can help?
         DENY       10.25.0.1 – 10.25.0.255
                          10.25.1.1 – 10.25.1.255
Permit only 1 host for Internet
                10.25.7.136 255.255.255.192 ------ TMG Server
Using access-list.
( Current configuration )
object-group network IP
description Block_IP
range 10.25.0.2 10.25.0.255
range 10.25.1.2 10.25.1.255
interface GigabitEthernet0/0
ip address 192.168.2.3 255.255.255.0
ip nat inside
ip virtual-reassembly in max-fragments 64 max-reassemblies 256
duplex auto
speed auto
interface GigabitEthernet0/1
description ### ADSL WAN Interface ###
no ip address
pppoe enable group global
pppoe-client dial-pool-number 1
interface ATM0/0/0
no ip address
no atm ilmi-keepalive
interface Dialer1
description ### ADSL WAN Dialer ###
ip address negotiated
ip mtu 1492
ip nat outside
no ip virtual-reassembly in
encapsulation ppp
dialer pool 1
dialer-group 1
ppp authentication pap callin
ppp pap sent-username xxxxxxx password 7 xxxxxxxxx
ip nat inside source list 101 interface Dialer1 overload
ip route 0.0.0.0 0.0.0.0 Dialer1
ip route 10.25.0.0 255.255.0.0 192.168.2.1
access-list 101 permit ip 10.25.0.0 0.0.255.255 any
access-list 105 deny   ip object-group IP any
From the 4500 Catalyst switch
( Current Configuration )
interface GigabitEthernet0/48
no switchport
ip address 192.168.2.1 255.255.255.0 interface GigabitEthernet2/42
ip route 0.0.0.0 0.0.0.0 192.168.2.3

Hello,
Host will can't get internet connection
I remove this configuration......         access-list 101 permit ip 10.25.0.0 0.0.255.255 any
and change the configuration ....      ip access-list extended 101
                                                            5 permit ip host 10.25.7.136 any
In this case I will allow only host 10.25.7.136 but it isn't work.
No internet connection from the TMG Server.

Need help for cenvat reversal

Hi Friends,
Need help for cenvat reversal.
Reversed MIRO by MR8M & MIGO by 102 movement but not able to post & cancel cenvat by J1IEX.
In table J_1IEXCHDR status = "P" and J1I5 does not update for document of 102 movement because reversal document of MIGO, i.e. material document with 102 movement type does not have excise tab. MBSM-Cancelled Material Documents, does not show any of the material documents.
Want to reverse the cenvat credit, please help.
--Anil Bhamere

Hi,
If I select Cancellation in MIGO then there is only Material Document option.
In MIGO Purchase Order option shows for Goods Receipt, Goods Issue and Subsequet Adj.
In this case I have been selected Goods Receipt option followed by purchase order number by which original goods receipt MIGO was created, selected 102 movement type and from line item respective MIGO document. The reversal document created successfully where as original MIGO document does not show in cancelled document list. When post option selected from J1IEX and entered vendor excise number then message appeared as No Part I exists for availing credit in excise invoice xxxxx.
If Cancel option selected from J1IEX and entered vendor excise number then message appeared as Excise invoice xxxx has already been posted for vendor xxxxx.
Please help.
Regards,
Anil Bhamere

Need help for finding objects impacted by size change for an infoobject

hi all,
need help for finding objects impacted by size change
for xxx infoobject, due to some requirements, the size to be changed from
char(4) to char(10), in the source database tables as well as adjustment
to be done in BI side.
this infoobject xxx is nav attribute of YYY as well as for WWW
infoobjects. and xxx is loaded from infopkg for www infoobject load.
now that i have to prepare an impact analysis doc for BI side.
pls help me with what all could be impacted and what to be done as a
solution to implement the size change.
FYI:
where used list for xxx infoobject - relveals these object types :
infocubes,
infosources,
tranfer rules,
DSO.
attribute of characteristic,
nav attribute,
ref infoobject,
in queries,
in variables

Hi Swetha,
You will have to manually make the table adjustments in all the systems using SE14 trans since the changes done using SE14 cannot be collected in any TR.
How to adjust tables :
Enter the table name in SE14. For ex for any Z master data(Say ZABCD), master data table name would be /BIC/PZABCD, text table would be /BIC/TZABCD. Similarly any DSO(say ZXYZ) table name would be /BIC/AZXYZ00 etc.
Just enter the table name in SE14 trans --> Edit --> Select the radio button "Save Data" --> Click on Activate & adjust database table.
NOTE : Be very careful in using SE14 trans since there is possibility that the backend table could be deleted.
How to collect the changes in TR:
You can collect only the changes made to the IO --> When you activate, it will ask you for the TR --> Enter the correct package name & create a new TR. If it doesn't prompt you for TR, just goto Extras --> Write transport request from the IO properties Menu screen. Once these IO changes are moved successfully, then the above proceduce can be followed using SE14 trans.
Hope it helps!
Regards,
Pavan

HP PSC 1315 - need help for a XP and Vista network

Similar Messages

Maybe you are looking for