HP psc 1350 all in one not scanning

I have installed all updates from hp and mac. running osx 10.56. receiving error message during scan. The appliciation hp scan pro quit unexpectedly mac osx and other applications are not affected. I have searched discussions for answer. No answers on forum. Anyone know of a fix?

silverstreak08 wrote:
I have installed all updates from hp and mac. running osx 10.56. receiving error message during scan. The appliciation hp scan pro quit unexpectedly mac osx and other applications are not affected. I have searched discussions for answer. No answers on forum. Anyone know of a fix?
Yes. There are two fixes:
1 downgrade back to 10.4.
2 buy a new MFD.
I used to have a PSC1350. Scanning went belly-up on impact with 10.5. HP's site said, in so many words, that scanning with a PSC1350 was not and never would be supported on either Leopard or Vista, and that they recommended replacing the MFD. I did exactly that: with a Brother MFC-440CN. That works, and unlike the HP, it works over a network with Mac and Windows clients without my having to jump through hoops. HP Support is to be congratulated for their new role as Brother USA's main marketing arm.

Similar Messages

PSC 1350 all-in-one not completing print jobs wirelessly with windows 7 64 bit

I have a acer 5542 running windows 7 (64bit), connected wirelessly to an Orange Livebox hub, to which my HP PSC 1350 printer is connected (via USB cable) therefore using the Livebox as a USB printer server. This configuration has worked very well for my 2 XP laptops for the past year or two. I set up the printer on the windows 7 laptop by connecting it directly, via the USB cable, letting windows install it, and download the latest drivers, (although HP say they have no specific 64bit drivers for this printer, but the drivers they have, and that windows downloaded, work fine!) then i changed the port to the livebox ip address.
All this worked fine (as on the xp machines), I printed out a spreadsheet, which worked fine untill it approached the end of the page, then just stopped. I troubleshot the printer which didnt return any sprcifics, Just that the print job had failed, and that it had rectified the problem, then the printer starts reprinting the same document, to the same point, (about 95% complete) and again stalls, and so the cycle continues. I have tried it with various different documents and photos, to the same ends. But if i connect the laptop directly to the printer, via USB, it completes the jobs fine
I have posted on microsoft answers forums, but the one answer i have recieved (re installing everything) did not solve the problem. Although i am not too savvy on computers, i kind of get the feeling it is a spooling issue. (not processing or holding onto the last part of a print file! But its only a feeling!)
any help would be very much appreciated

Hi there,
I understand you're looking for drivers for your PSC 1210 on Windows 7. I will certainly do my best to guide you in this issue.
At this time there are no HP drivers available for this printer for Windows 7. You can still use the printer with Windows 7, you will just have to use the drivers available within Windows 7. That document will walk you through what you need to do in order to get printing again, and will also show you how to scan with this Windows driver.
Hope this helps, have a great day!!
Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
**MissTeriLynn**
I work on behalf of HP

OCR Software for HP PSC 1350 All-in-one

My mother owns a HP PSC 1350 All-in-one. She has Windows 7 OS. She has had it for a while and never needed to scan and type, but she does now for work.
Does anyone know if the HP PSC 1350 All-in-one came with OCR Software on the disk, or if it is downloadable?
If not are there any OCR freeware programs that won't contaminate her computer with ad & mal ware?
Thank you.

Hi,
No more support from the Vista ages or at least 7 years ago:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&lc=en&dlc=en&product=306888
You can scan to Word under XP means it does have an OCR software.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Installing HP PSC 1350 all-in-one printer/scanner

In the past, I could usually solve the "Offline" or "Not Connected" problems by unplugging my printer for a few minutes, but that no longer works. So, I decided to buy another one. However, just before clicking on the BUY button on Amazon, I decided to try to fix the problem one more time. Part of the "fix" was deleting my printer from the computer and then reinstalling it. This is where I'm now stuck. I deleted it, but I can't reinstall it. I get to the ADD window, but everything is grayed out. So, how do I install my printer? I might add that the HP instructions that I was following (OSX v. 10.9 Mavericks- Installing and using the printer on a Mac) are what got me this far.

Have you installed the v10.9 Mavericks compatible driver yet >> Software & driver downloads HP PSC 1350 All-in-One Printer | HP® Support
After you download the driver, open System Preferences > Printer & Scanners > Print
Delete the current printer by selecting it then click - (minus)
Then click + to add the printer back in.
That should load the driver for you.

Hp psc 1350 all-in-one driver download issues

Hello
I have a Toshiba laptop and an hp psc 1350 all-in-one printer. Both were working well until Sunday. Now the printer will not work.
The on light of the printer is constantly on when attached to power, I can press the on button so it doesn't appear to be broken, but the light will not turn off.
When I remove the power cord the lights cycle through the printer panel (and the on button light does go off momentarily) then the on light stays on and will not turn off.
I have been unable to download the latest driver update from Windows Update or any websites automatically or manually - TOSHIBA USB DVB-T/Analog Hybrid Tuner (391 KB). The download always fails. I also tried the FixIt facility from Microsoft, but it tells me there are no issues.
Does this mean the driver is the issue, or do I have to purchase a new printer?
Thanks for your help.
This question was solved.
View Solution.

Hi Gerri_31,
I understand you aren't able to shut down the printer with the power button.
Thank you for your reply.
I will be happy to help you with this.
I would do a power reset to see if that will resolve the issue. With the printer still turned on, disconnect the power cable from the back of the printer, hold the power button for 10 seconds to drain any power, if the printer has external power module with a detachable power cord disconnect it for 15 seconds and then reconnect it. Then disconnect the power cable from the wall outlet. Wait 10 seconds and reconnect the power cable back to the wall outlet first, then the back of the printer and power it on again.
Make sure the printer is connected directly to wall outlet. (don't use a power hub or a surge protector)
I have provided a document for power issues.
The HP Printer Won't Turn On or Respond.
If these steps don't resolve the issue I would recommend to call HP Tech Support for
further assistance to see what other options are available for you or to find out about
the trade in and trade up program.
Contact HP Worldwide.
Hope this helps.
Thank you for posting on the HP Forums. Have a great day!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP psc 1350 all-in-one printer

Re HP psc 1350 all-in-one printer, it it possible to connect a usb wirless adapter into this printer, so that it effectively becomes a wireless printer? (dumb question? but thanks in advance anyway)
This question was solved.
View Solution.

You need a device called a wireless print server. Get one with a usb interface. Here is an example of one.
WPS

Hp psc 1350 all-in-one /wi fi enabling

I have an hp psc 1350 all-in- one printer. My desktop is a dinosaur and won't handle broadband internet. I now use an Apple iPad tablet on wi fi and don't want to purchase another printer. Is there a way to make my printer work on wi fi with my tablet through my router without a desktop computer. I tried hooking it up per instructions off of eHow but it my tablet can 't find it. Do I need a Driver or something else to make it work or is it even possible. Thanks for any help anyone can give me . Learnin.
This question was solved.
View Solution.

Hi,
You will need an AirPrint enabled printer to print directly from an iPad or a networked printer to print from the HP ePrint mobile app.
I afraid the PSC 1350 is a USB only printer, it doesn't support printing from a mobile device as iPad.
You may find a list of supported printers for iOS devices in the following document:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03722645&tmp_task=prodinfoCategory&cc=us&dlc=en...
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Psc 1210xi all-in-one not responding

My psc 1210xi all-in-one is not responding. I was able to use the stand alone copy feature and also print a document from my hp laptop (Windows 7) successfully last night. (After plugging it into this laptop for the first time by the way.) Now I am trying to print a document and it will queue up, but not ever print. I tried to copy something to see if it would work and it copied just fine. So it's a problem between my computer and the printer I guess.
Tried unplugging it and waiting, then plugging it back in. Didn't get things running.
I read a post where it was suggested to delete items from spool file and I tried it. Tried printing again afterwards and it still won't print.
This printer is set as the default printer. I no longer have anything (cds, instructions, etc.) that came with it. The ink is brand new and printer is not paper jammed or showing any signs of Error.
It just never prints what's in the queue. Thank you for your help.
This question was solved.
View Solution.

OK got it working by trying the print spool cancel and restart method ONE MORE TIME. Not sure if I just didn't do it correctly the first time, or if printer goblin left to go bother someone else. Thanks though.

HP psc 24110 all-in-one - Problems scanning with OS X v10.5.7

Hi, I have been using my HP psc 2410 photosmart all-in-one printer successfully for the past 10months with my MacBook Pro. I recently upgraded my OSX operating system to v10.5.7. since then my printer has been unable to scan. It will print, copy & fax. Checking the HP website shows the latest version of OS X does not support the scanning function of the psc 2410. Does anyone know how I can fix this problem or do I have to buy another scanner? Alternatively, how do I get back to the previous version of OS X which was supplied with my Computer so that I can get the scan function to work?

Hi aviete,
There is no full feature software and driver but you can download HP Printer Drivers for OS X. This download includes the latest HP printing and scanning software OS X Mavericks, OS X Mountain Lion, OS X Lion and Mac OS X v10.6 Snow Leopard.
With this driver you can still print and scan, you just wont have HP software to scan from. Scanning to the computer from the printer control panel is only available when using HP Scan software, thus it will not work because there is no HP scan software as apart of the Apple Software Update driver.
Instead, you can scan using,
Method one: Scan from the Print & Scan window
Method two: Scan from Apple Preview
Method three: Scan from Apple Image Capture
I hope this helps. If you have any additional questions are have any difficulty using any of these methods, please let me know what method you are trying and what the issue/error is. You may also find the following document helpful; OS X v10.9 Mavericks: Installing and Using the Printer on a Mac
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

What is the password for hp psc 1350 all in one printer. want to connect to ipad.

i have aan all in one printer psc 1350. i want to connect it to ipad in this manner.
IPAD to COMPUTER via WIFI
COMPUTER to PRINTER via USB cable
so when i try to connect ipad to printer, it requires some username and password. i dont know what to type in there.
i am running on a win 7 32 bit

Sorry, but this will not work. Your printer has to be directly on you network, not tethered to a computer that is on the network.
Since your printer is USB only (not a network-able printer), your only solution is to get a new wireless printer. Get one that supports AirPrint if you want to print from your iPad.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

My HP 8600 all in one not scanning on IMac

I set up my HP 8600 Pro all in one for my IMac and the printer prints, scan, yet I don't know how to save the scan. I saved it to my document and desktop and still not able to locate the item that was scanned. Please Help. My IMac is new OS X 10.9. I am using wireless network and that's the way I installed the HP on to my IMac.
Thank you

Hi All, I called Canon this morning..
The Tech helped me Download the MP280 Navigator Software..
My MP280 now works with Mavericks, both Scanner & Printer AOK............
Hope This Helps..............................

7520 All In One not scanning from computer

I have a 7520 all in one printer. I can scan from the printer to my computer with no problems, I can print from my computer with no problems. I have always been able to control scanning from my computer when I put a picture on the printer without any issues. The HP Photosmart icon on my desktop is there but I cannot open it. I've tried opening it from the Start Menu and I still can't open it. Now I've tried going to the HP Solutions Center and when I click on that it says it cannot run b/c installation is not complete. (I've had this printer for a almost a year and this just happened out of the blue.)
I uninstalled the printer then reinstalled it again. I unplugged my printer and my wireless router and retstarted both, all to no avail. My software is updated and I've run Scan Doctor and everything is in working order.
I simply cannot open HP Photosmart from my computer.

Hi @FinnGirl47,
Welcome to the HP Forums!
I understand that you cannot scan from the computer with your HP Photosmart 7520, and I am happy to help!
For further assistance, I will need to know: If you are using a Windows or Mac Operating System, and the version number. To find the exact version, visit this link. Whatsmyos, also if the printer is able to make copies.
In the meantime, please try going through this scanning guide, A 'No Computer Detected' or 'Connection Error' Message Displays during Scanning.
Thank you for posting!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

HP Deskjet Ink Advantage 2545 all in one not "scanning" properly

I just received my printer today - HP Deskjet Ink advantage 2545. I was so psyched to use the scanner, and when I finally did, I learned that this printer/ scanneer doesn't really scan docs or pictures properly - parts of the scanned docs are covered in black (see sample below). I tried several times, even cleaned the glass (even if it's new, fresh out of the box) but the same thing keeps on happening. Is this printer defective? should I return it to?

Hi @VitoCLN,
Welcome to the HP Support Forums! I see your HP Deskjet Ink Advantage 2545 is not scanning properly, I appreciate the screenshot.
I would like you to perform a Hard Reset on the 2545 and retry the scan:
1. Unplug all cables and memory cards from the printer. Unplug the power cord, directly from the back of the printer while the printer is still turned on.
2. Unplug the other end of the cord from the power source.
3. If there is a power module on the power cord, disconnect one end and reconnect it.
4. After 60 seconds, plug the cord directly into a wall outlet (not a surge protector or battery backup as they can cause the printer to lose basic functionality over time).
5. Plug the power cord into the back of the printer.
6. The printer should automatically power back up. If it doesn't, turn it on with the power button.
7. Try making a photocopy (if your printer is an all-in-on printer) before connecting any other cables to the printer.
8. Connect any other needed cables to the printer.
Now continue here with Solution One only: Vertical Bands, Lines, or Streaks in Copies, Faxes, or Scans
Were you able to complete the scan successfully?
I hope to hear from you soon.
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Photosmart all in one - not scanning to PDF

Our photosmart premium all in one fax, scanner printer no longer scans to PDF files.
It prints ok and we can scan to photo directly from the scanner to USB and from / to the PC.
It worked perfectly well before, then started to stop several pages into a multipage scan. Then halfway through 1st page - now won't scan at al to PDF.
Any ideas? We have uninstalled and re-installed several times - no success.

Hello ZiggyCat, and welcome to the HP Forums, I hope you enjoy your experience!
I see you are experiencing scan issues. I would love to try and help you, but I do need a little information first. I am linking a few HP Support documents below that will show you how to find which operating system you are using. Also, if you're using Windows, please include whether your operating system is 32-bit or 64-bit. With this information we can provide you with accurate information.
Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
Which Windows operating system am I running?
Is the Windows Version on My Computer 32-bit or 64-bit?
Also, do you experiencing any issues copying?
Good luck and please let me know the results of your findings. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

OfficeJet J4550 All-In-One not scanning or copying; only prints from certain sites

I have a HP Pavillion Slimline 400 and my will not scan or copy, and only prints from certain sites. I have uninstalled and installed the software driver numerous times and still get a "scanner not working" message. I have also unplugged and turned off and replugged in the USB and the power cords several times. Currently, I have uninstalled the printer software, so I have no recognizable printer on my PC. Help!!

Hello bran1288,
Welcome to the HP Forums.
I see that you are having an issue with scanning and printing from a select few sites.
I have a few steps that we can try to troubleshoot this issue.
First off, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
As for printing from web pages, please make sure that you have your firewall or anti virus settings turned down as well as the Pop-up blocker disabled. If this does not resolve the issue, maybe try another web browser such as Mozilla fire fox or Google Chrome.
As for the scanning issue, so I can better assist you, please respond with which Operating System you are running:
Which Windows Operating System am I running?
Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
Please write me back when you have time and I will be happy to help.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

HP psc 1350 all in one not scanning

Similar Messages

Maybe you are looking for