HP psc 1350 All In One Printer - missing .dll file

Not for sure if the following is a 'Windows XP' component or 'H.P. Printer/Scanner' component?
When desktop PC screen comes on, message reads: " hphmon 06.exe - Unable to Locate Component. This Application has failed to start because hpzjrd 01.dll was not found. Re-installing this application may fix the problem." Question : How can I re-install this 'application' - without doing a complete recovery ?
This question was solved.
View Solution.

Hello again Circle-3,
Just so you know, doing the download is not going to be much bigger (if at all ) than the software and drivers on the disk. It is updated so after the printer is installed, it will perform more efficiently because of the updates.
Thanks again for your time.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Similar Messages

Installing HP PSC 1350 all-in-one printer/scanner

In the past, I could usually solve the "Offline" or "Not Connected" problems by unplugging my printer for a few minutes, but that no longer works. So, I decided to buy another one. However, just before clicking on the BUY button on Amazon, I decided to try to fix the problem one more time. Part of the "fix" was deleting my printer from the computer and then reinstalling it. This is where I'm now stuck. I deleted it, but I can't reinstall it. I get to the ADD window, but everything is grayed out. So, how do I install my printer? I might add that the HP instructions that I was following (OSX v. 10.9 Mavericks- Installing and using the printer on a Mac) are what got me this far.

Have you installed the v10.9 Mavericks compatible driver yet >> Software & driver downloads HP PSC 1350 All-in-One Printer | HP® Support
After you download the driver, open System Preferences > Printer & Scanners > Print
Delete the current printer by selecting it then click - (minus)
Then click + to add the printer back in.
That should load the driver for you.

HP psc 1350 all-in-one printer

Re HP psc 1350 all-in-one printer, it it possible to connect a usb wirless adapter into this printer, so that it effectively becomes a wireless printer? (dumb question? but thanks in advance anyway)
This question was solved.
View Solution.

You need a device called a wireless print server. Get one with a usb interface. Here is an example of one.
WPS

What is the password for hp psc 1350 all in one printer. want to connect to ipad.

i have aan all in one printer psc 1350. i want to connect it to ipad in this manner.
IPAD to COMPUTER via WIFI
COMPUTER to PRINTER via USB cable
so when i try to connect ipad to printer, it requires some username and password. i dont know what to type in there.
i am running on a win 7 32 bit

Sorry, but this will not work. Your printer has to be directly on you network, not tethered to a computer that is on the network.
Since your printer is USB only (not a network-able printer), your only solution is to get a new wireless printer. Get one that supports AirPrint if you want to print from your iPad.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

How can I install the HP PSC 1350 All-in-One Printer {Windows XP} w/o a CD?

I'm having difficulty installing my AIO printer without a CD & I really would like to update the Driver as well... I'm so frustrated!

Hi @glgaucher
I am sorry to hear that this has been a frustrating experience for you. I would like to help you obtain the full feature software and driver for your PSC 1350. Please use the following link to download and install the software; gc_w01_ENU_NB.exe.
This download includes the HP Photosmart Software Suite (enhanced imaging features and product functionality) and Driver. If you only want the print driver (without the Photosmart Software Suite), it is available as a separate download named "HP Officejet and PSC Basic Software and Driver".
I hope this helps.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

HP PSC 1350 all in one printing blurred

Hi I tried to search for an answer but I have a few problems.
Right.... bear with me whilst I explain.
1 I have recently installed brand new cartridges into my printer and have realigned them using the print test page and scanning it.
The test page was fine - butwhen I get to print out an important document it seems to print out blurred text and graphics doen the middle of the page.
2. I have a netbook so I have no CD rom drive to be able to install printers HP Director from the disk. I am running on Windows 8 by the way.
I printed of a CV earlier on this month and there was nothing wrong with that print. I havent used it since and then this happens.
Can anyone provide me help on what i can do to resolve this and if there is a version of HP Director
that is compatible with my printer and Windows 8? (free version please)
I thank you for your assistance on this.
VARLEYPANTS

Hi VARLE
I understand the text and photos are blurred. But the hardware self test prints properly.
I have included a document for workarounds for the HP Solution Center and Toolbox with Win8. Select I've always used HP Solution Center and HP Toolbox. What do I use now? You can take a look at What are the limitations with the Windows Update driver?
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03460648&cc=us&dlc=en&lc=en&os=4131&product=306...
I would suggest trying HP Photo Creations Software.
https://shop2.rocketlifeproduction.com/hpfe6fd34b208847e8f8254b9be96e8c4c/catalog.html?ocat=@photobo...
If you require further assistance please provide the following so I can assist you better.
Are you using Genuine HP Cartridges?
Where are you printing from?
What type of paper are you using?
Did you set the printer preferences for the paper type and quality settings?
What are the settings?
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Hp psc 1350 all-in-one /wi fi enabling

I have an hp psc 1350 all-in- one printer. My desktop is a dinosaur and won't handle broadband internet. I now use an Apple iPad tablet on wi fi and don't want to purchase another printer. Is there a way to make my printer work on wi fi with my tablet through my router without a desktop computer. I tried hooking it up per instructions off of eHow but it my tablet can 't find it. Do I need a Driver or something else to make it work or is it even possible. Thanks for any help anyone can give me . Learnin.
This question was solved.
View Solution.

Hi,
You will need an AirPrint enabled printer to print directly from an iPad or a networked printer to print from the HP ePrint mobile app.
I afraid the PSC 1350 is a USB only printer, it doesn't support printing from a mobile device as iPad.
You may find a list of supported printers for iOS devices in the following document:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03722645&tmp_task=prodinfoCategory&cc=us&dlc=en...
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Hp psc 1350 all-in-one driver download issues

Hello
I have a Toshiba laptop and an hp psc 1350 all-in-one printer. Both were working well until Sunday. Now the printer will not work.
The on light of the printer is constantly on when attached to power, I can press the on button so it doesn't appear to be broken, but the light will not turn off.
When I remove the power cord the lights cycle through the printer panel (and the on button light does go off momentarily) then the on light stays on and will not turn off.
I have been unable to download the latest driver update from Windows Update or any websites automatically or manually - TOSHIBA USB DVB-T/Analog Hybrid Tuner (391 KB). The download always fails. I also tried the FixIt facility from Microsoft, but it tells me there are no issues.
Does this mean the driver is the issue, or do I have to purchase a new printer?
Thanks for your help.
This question was solved.
View Solution.

Hi Gerri_31,
I understand you aren't able to shut down the printer with the power button.
Thank you for your reply.
I will be happy to help you with this.
I would do a power reset to see if that will resolve the issue. With the printer still turned on, disconnect the power cable from the back of the printer, hold the power button for 10 seconds to drain any power, if the printer has external power module with a detachable power cord disconnect it for 15 seconds and then reconnect it. Then disconnect the power cable from the wall outlet. Wait 10 seconds and reconnect the power cable back to the wall outlet first, then the back of the printer and power it on again.
Make sure the printer is connected directly to wall outlet. (don't use a power hub or a surge protector)
I have provided a document for power issues.
The HP Printer Won't Turn On or Respond.
If these steps don't resolve the issue I would recommend to call HP Tech Support for
further assistance to see what other options are available for you or to find out about
the trade in and trade up program.
Contact HP Worldwide.
Hope this helps.
Thank you for posting on the HP Forums. Have a great day!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Paper Jam for HP PSC 1610 All-in-One Printer

Paper Jam for HP PSC 1610 All-in-One Printer:
I had a paper jam and cleared the paper from the printer. Now every time I turn the printer "on" it picks up the top piece of paper from the tray and runs it about ½ to ¾ of the way thru the paper feed, stops, and then displays message "paper jam clear paper and then press OK". When I do that it simply picks up the next piece of paper off the tray and does the message again. If I push the OK button on the printer it will simply finish the ejection and then pick up the next paper from the tray, and do the same thing. I have examined the interior (and exterior) of the printer for paper scraps and any other obvious sign of trouble (dirty drive wheels, missing rollers, broken springs, etc...) and can not see anything unusual. I can not print a test print because of the paper jam message. I am running Windows XP and the printer has been working fine for months (until this recent jam). I did all the steps from the HP fix it site including clean rollers, plug and unplugged, carriage travel OK and more. Don't know what to do now........Any help would be great!!!! Thank you!

Hi my printer psc 1610 hp not picking paper

Does hp support a HP psc 1500 all in one printer

I can not print in black. I've re uninstalled and re installed my printer at least 6 times, can not find my printer which is a HP psc 1500 all in one listed therefore I used software for 1510 all in one. It prints all text in light blue. I've tried changing my printing preferences many different ways. Nothing seems to correct this problem. I've run a test page and it printed two lines in black( black print read HP PSC 1500 series and my serial number on the second line) and 3 color blocks and the rest was small squares and small lines in 3 columns. My frustration level is at an all time high. I've literally spent an entire day trying to fix this problem. Please help before I do something RASH. Thank You, Greta2

Hey @greta2,
Welcome to the HP Support Forum. I understand you're having a print quality issue with your HP PSC 1500 All-in-One Printer. I would like to assist you in resolving this and have some steps that may improve your print quality. You were correct in using the 1510 All-in-One drivers as they are compatible with your printer. Additionally, you were very diligent in approaching the problem from a software perspective - this rules out printer settings as being the most likely cause of the absence of black ink in your printouts.
From what you're describing with the test-page printout, I would recommend that you troubleshoot the issue at the hardware level. For starters, click on the following article heading and work your way through Steps 2 through 6 to better diagnose the issue:
Missing, Faded, or Dull Colors
As I suspect your print diagnostic page (Steps 3-6) will be lacking black ink in some parts as before, proceed with the following steps:
Run the clean print cartridges utility
Open the Printer Toolbox. There are two ways to do this:
Open HP Director (or HP Solution Center), select the Settings menu, then the Print Settings submenu, and finally the Printer Toolbox.
Open Printers and Faxes in the Windows Control Panel, then right-click your printer icon and choose Properties. Click on Printing Preferences. Click the Services tab, then the Service This Device icon.
The Printer Toolbox opens. On the Device Services tab, click Clean the Print Cartridges , then follow the on-screen instructions. Up to three levels of cleaning are available. Discard or recycle the page that prints.
Clean the contacts
Gather the following items to clean the cartridge and carriage:
Clean distilled water. Use bottled or filtered water if distilled water is not available. Tap water can contain contaminants that damage the cartridge.
Clean cotton swabs or any soft, lint-free material that will not stick to the cartridges (coffee filters work well).
Sheets of paper or a paper towel to rest the cartridge on during cleaning.
Open the cartridge access door and wait until the carriage is idle and silent.
Disconnect the power cord from the back of the printer.
Remove the cartridge and place it on a piece of paper with the nozzle plate facing up.
NOTE:Do not leave the cartridges outside of the printer for more than 30 minutes. If the cartridge is outside of the printer for too long, the ink can dry and clog the nozzles.
Dip a clean foam-rubber swab or lint-free cloth into distilled water, and then squeeze any excess water from it.
Clean only the copper-colored contacts
Figure : Clean the contacts
Copper-colored contacts
Ink nozzles (do not clean)
Repeat these steps for the other cartridge.
Lightly moisten another cotton swab with distilled water, and then squeeze any excess water from the swab.
Use the swab to clean the electrical contacts in the carriage, located inside the printer on the carriage slots.
Figure : The electrical contacts in the cartridge slots
Wait 10 minutes to allow the cartridge and carriage electrical contacts to dry.
Reinstall the cartridges.
Close the cartridge access door.
Reconnect the power cord to the back of the printer.
Press the Power button to turn on the printer.
Try to print a page.
If you are still unable to print, repeat these steps to clean and reseat the cartridges. Multiple cleanings might be necessary to restore printing.
Black cartridges only: remove and rest for two hours
NOTE:The procedure below will not fix missing lines or streaked bars printed by the tri-color, photo, or gray photo cartridges, or other color printing problems. Only perform the steps below if the black print cartridge has printed defective patterns, or if you notice non-uniform black text darkness.
In the black print cartridge, this problem may be caused by sediments collecting in the nozzle area. Follow the steps below to solve this problem:
Remove the black print cartridge.
If the carriage has a latch, relatch it and then close the printer - this is important. If the printer is not closed, it cannot adequately protect the remaining tri-color cartridge.
Place the cartridge on a level surface with the nozzles up (label down).
Figure : Cartridge with the nozzles up
Allow the cartridge to sit undisturbed for two hours.
Reinstall the cartridge and print another self test page.
Click the Windows Start button, then click Control Panel.
Double-click the Printer and Faxes folder.
Right-click the icon for your printer and choose Preferences.
Choose the Services tab and click Service this Device. The printer Toolbox opens.
On the Devices Services tab, click Print a Diagnostic Page.
Look for defects on the page.
If the self test page shows no defects for the black cartridge, and if the cartridge was new, align the cartridge. To align the cartridge, follow the steps below:
Load fresh, white paper.
Click the Windows Start button, then click Control Panel.
Double-click the Printer and Faxes folder.
Right-click the icon for your printer and choose Preferences.
Choose the Services tab and click Service this Device. The printer Toolbox opens.
On the Device Services tab, click Align the Printer.
If the cartridge was not new, there is no reason to align the printer.
If the page still shows defects, go to the next step.
Replace the problem cartridge
If a cartridge replacement was not tried previously to solve this problem, replace the problem cartridge now. Click here (c00206040) (in English) to see if the cartridge is covered under warranty.
Source: http://support.hp.com/us-en/product/hp-psc-1510-all-in-one-printer-series/428822/model/428823/docume...
Let me know the result of your troubleshooting by responding to this post. Best of luck!
E-roq
I work on behalf of HP.
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

HP Officejet and PSC Full Feature Software for HP PSC 1210 All in one printer

Hello ,
I have HP PSC 1210 All in one printer but i am using windows 7 system.how can i find
'HP Officejet and PSC Full Feature Software'
compatible for windows 7, in hp.com i sould find the above software for windows xp but for windows xp its not working, my printer physical keys are not working so i need software to do everyything from print to scan, copy etc from my windows 7 laptop itself. pls help with sofware for windows 7

Hi,
There is not a full feature software Win 7 download available for the HP PSC 1210. The following document includes instructions on how to install the in-OS Win 7 driver with instructions on how to scan:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01796879&cc=us&dlc=en&lc=en&os=4062&product=907...=
I work for HP.

Hp psc 1315 all-in-one printer

I have installed a hp psc 1315 all in one printer on my new Mac OS X version 10.9.5.
While I can print without any problems, I don't have access to scan a document from the printer to my computer.
Can anyone help with this?
Thank you.

Hello @annlf
Welcome to the HP Community!
I hope to help you with the scanning concern you have today.
Unfortunately, you will not be able to scan using HP software with your PSC 1315 (older model), on Mavericks (newer OS X), as there is no Full Feature driver (includes scanning software) available.
However, you do have some other options to scan. See this link for your options. Scroll down when the guide loads and select "How do I scan with the driver from Apple Software Update?"
OS X v10.9 Mavericks: Installing and Using the Printer on a Mac
Have a wonderful Wednesday
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

HP PSC 1210 All-in-One Printer -- need Software (scanner directory), for windows 7 (64) bit

hi,
I am kind of done with this Printer ! lost hope in customer care and support hit with HP ! from Past 10 days searching a software to scan few doc from my printer 1210 (HP PSC 1210 All-in-One Printer) but i dint find.... i got one from some source (166 Mb) file, but to my surprise its not compatable with Windows 7. i am totally depressed now.... Please help me to find software for this (scanner document) I have lost the CD lont time back can i download This some where?

Hi there,
I understand you're looking for drivers for your PSC 1210 on Windows 7. I will certainly do my best to guide you in this issue.
At this time there are no HP drivers available for this printer for Windows 7. You can still use the printer with Windows 7, you will just have to use the drivers available within Windows 7. That document will walk you through what you need to do in order to get printing again, and will also show you how to scan with this Windows driver.
Hope this helps, have a great day!!
Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
**MissTeriLynn**
I work on behalf of HP

Psc 1315 all-in-one printer will not feed paper. There is no paper jam.

psc 1315 all-in-one printer has stopped feeding paper. There is no paper jam.

hi there sorry to learn that you are having this issue.
Are you still facing this issue? If you are I will do my best to help you.
Have you upgraded the firmware of your printer lately; you can get the latest firmware in the main support page for your printer
This is the main support page for your printer, GO HERE Go to software and drivers download and select your operating system. You should also upgrade the firmware of the printer.
If you are not experiencing this issue any longer, May you let me know, your time and courtesy,
will be deeply appreciated.
Regards;
RobertoR
remember ==▼
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

Hp psc 1210 all in one printer feeding error

I have a model 1210 all in one printer and it will not feed paper. it sounds like something its working, but not gripping the paper. PLEASE ADVISE

Hello @anne0701 , and welcome to the HP Forums!
I can see you're experiencing paper feed issues. I would like to help!
I would recommend performing a power reset. Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
I would also suggest following the steps in this video on PSC feed issues:
Fixing Paper Pick-Up Issues - HP PSC 1200 All-in-One Printer
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

HP psc 1350 All In One Printer - missing .dll file

Similar Messages

Maybe you are looking for