HP PSC 1350 DRIVER MISSING ON WIRELESS/ THERE ON USB

when i plug in my hp psc 1350 through my usb the drive is auto-selected with the HP All-in-One 2.7.2
but when i connect it through APE it's asking me to select the driver.
the hp all-in-one 2.7.2 driver is not in the HP list....but its on my system somewhere.....right?
please help
thank you!!!!

installed new driver

Similar Messages

PSC 1350 all-in-one not completing print jobs wirelessly with windows 7 64 bit

I have a acer 5542 running windows 7 (64bit), connected wirelessly to an Orange Livebox hub, to which my HP PSC 1350 printer is connected (via USB cable) therefore using the Livebox as a USB printer server. This configuration has worked very well for my 2 XP laptops for the past year or two. I set up the printer on the windows 7 laptop by connecting it directly, via the USB cable, letting windows install it, and download the latest drivers, (although HP say they have no specific 64bit drivers for this printer, but the drivers they have, and that windows downloaded, work fine!) then i changed the port to the livebox ip address.
All this worked fine (as on the xp machines), I printed out a spreadsheet, which worked fine untill it approached the end of the page, then just stopped. I troubleshot the printer which didnt return any sprcifics, Just that the print job had failed, and that it had rectified the problem, then the printer starts reprinting the same document, to the same point, (about 95% complete) and again stalls, and so the cycle continues. I have tried it with various different documents and photos, to the same ends. But if i connect the laptop directly to the printer, via USB, it completes the jobs fine
I have posted on microsoft answers forums, but the one answer i have recieved (re installing everything) did not solve the problem. Although i am not too savvy on computers, i kind of get the feeling it is a spooling issue. (not processing or holding onto the last part of a print file! But its only a feeling!)
any help would be very much appreciated

Hi there,
I understand you're looking for drivers for your PSC 1210 on Windows 7. I will certainly do my best to guide you in this issue.
At this time there are no HP drivers available for this printer for Windows 7. You can still use the printer with Windows 7, you will just have to use the drivers available within Windows 7. That document will walk you through what you need to do in order to get printing again, and will also show you how to scan with this Windows driver.
Hope this helps, have a great day!!
Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
**MissTeriLynn**
I work on behalf of HP

Hp psc 1350 all-in-one driver download issues

Hello
I have a Toshiba laptop and an hp psc 1350 all-in-one printer. Both were working well until Sunday. Now the printer will not work.
The on light of the printer is constantly on when attached to power, I can press the on button so it doesn't appear to be broken, but the light will not turn off.
When I remove the power cord the lights cycle through the printer panel (and the on button light does go off momentarily) then the on light stays on and will not turn off.
I have been unable to download the latest driver update from Windows Update or any websites automatically or manually - TOSHIBA USB DVB-T/Analog Hybrid Tuner (391 KB). The download always fails. I also tried the FixIt facility from Microsoft, but it tells me there are no issues.
Does this mean the driver is the issue, or do I have to purchase a new printer?
Thanks for your help.
This question was solved.
View Solution.

Hi Gerri_31,
I understand you aren't able to shut down the printer with the power button.
Thank you for your reply.
I will be happy to help you with this.
I would do a power reset to see if that will resolve the issue. With the printer still turned on, disconnect the power cable from the back of the printer, hold the power button for 10 seconds to drain any power, if the printer has external power module with a detachable power cord disconnect it for 15 seconds and then reconnect it. Then disconnect the power cable from the wall outlet. Wait 10 seconds and reconnect the power cable back to the wall outlet first, then the back of the printer and power it on again.
Make sure the printer is connected directly to wall outlet. (don't use a power hub or a surge protector)
I have provided a document for power issues.
The HP Printer Won't Turn On or Respond.
If these steps don't resolve the issue I would recommend to call HP Tech Support for
further assistance to see what other options are available for you or to find out about
the trade in and trade up program.
Contact HP Worldwide.
Hope this helps.
Thank you for posting on the HP Forums. Have a great day!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP PSC 2170 driver in Print & Faxing list

Hello, I have an HP PSC 2170 All in One printer. I cannot locate the drivers when I try to install the printer as an IP Printer. If I discover it manually as an IP Printer (put in the IP Address) the printer and drivers are found but the print jobs always stall.
1. When installing this printer, why do I not see the HP PSC 2170 under the "Print Using" pull down?
2. How do I ensure the driver, which I have downloaded and executed from HP, will show up in this list?
This has to do with getting the Mac Book to connect to the Linksys Wireless Print Server.
Thank you,

There are two types of print driver on OS X - Carbon and CUPS. In the Carbon type, the manufacturer(writer) gets to program in the exact comm protocol that the driver works with. The Carbon driver from HP is for direct USB only. To use the standard network protocols provided by CUPS, you need to use a CUPS driver. Find a third-party CUPS driver for your model here:
http://www.linux-foundation.org/en/OpenPrinting/macosx
(It should be either hpijs or Gutenprint)

Hp psc 1350 all-in-one /wi fi enabling

I have an hp psc 1350 all-in- one printer. My desktop is a dinosaur and won't handle broadband internet. I now use an Apple iPad tablet on wi fi and don't want to purchase another printer. Is there a way to make my printer work on wi fi with my tablet through my router without a desktop computer. I tried hooking it up per instructions off of eHow but it my tablet can 't find it. Do I need a Driver or something else to make it work or is it even possible. Thanks for any help anyone can give me . Learnin.
This question was solved.
View Solution.

Hi,
You will need an AirPrint enabled printer to print directly from an iPad or a networked printer to print from the HP ePrint mobile app.
I afraid the PSC 1350 is a USB only printer, it doesn't support printing from a mobile device as iPad.
You may find a list of supported printers for iOS devices in the following document:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03722645&tmp_task=prodinfoCategory&cc=us&dlc=en...
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

What is the password for hp psc 1350 all in one printer. want to connect to ipad.

i have aan all in one printer psc 1350. i want to connect it to ipad in this manner.
IPAD to COMPUTER via WIFI
COMPUTER to PRINTER via USB cable
so when i try to connect ipad to printer, it requires some username and password. i dont know what to type in there.
i am running on a win 7 32 bit

Sorry, but this will not work. Your printer has to be directly on you network, not tethered to a computer that is on the network.
Since your printer is USB only (not a network-able printer), your only solution is to get a new wireless printer. Get one that supports AirPrint if you want to print from your iPad.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Can't install Windows 7 Pro x64 - device driver missing - can't eject DVD

Hello,
I am trying to install Windows 7 Pro x64 - I create the partition in boot camp and start windows install process. **During the Windows install process**, it says "A required CD/DVD device driver is missing. If you have a driver floppy disk, CD, DVD, or USB flash drive, please insert it now. Note: if the Windows installation media is in the CD/DVD drive, you can safely remove it for this step".
Apparently the drivers are on the OSX install DVD. But, there is no way to eject the windows DVD! Why on earth is there no manual eject on Macs? Is there another way to eject? I tried to put a paperclick in the slot next to where a CD is inserted but it didn't do anything. Is there another way to get Windows to see the correct device drivers?
I am all for clean slick designs, but when it does not have all required functionality, it is kind of useless.
I am talking to Mac Support and they can't help.
Looks like I will have to return this Mac, I also need to boot into full Windows (without Parallels or VMWare) to do my work.
dan
Message was edited by: dbperson

You don't mention what Mac you have, so I'd have to say there is almost no way to help.
IF the 7 Pro x64 came download ISO thru EDU, you have to burn it, and if you use Disk Utility, at 2X reduced burn speed... otherwise it won't work.
A VM isn't fussy and can use ISOs.
If you want both native and VM, to have Windows installed on its own hard drive and use it under OS X, then you have to install it and use Boot Camp Assistant.
I'd say it is all about your DVD media.

HP PSC 1350 Series Printer will NOT print from the internet ~ but will print a word document.

I have an HP PSC all-in-one PSC 1350 Series printer.
the operating system is Windows XP to the computer it's USB connected to.
Earlier this week I was having troubles with the WIFI and IT helpers changed setting on the modem and the router.
Still wouldn't work, so a new router is being sent to me.
To use the internet, I currently have the ethernet cord directed connected to the computer.
These past few days the printer worked both printing word documents AND print jobs from the internet.
NOW IT WILL PRINT NOTHING FROM THE INTERNET. (ex: email messages, invoices, statements etc)
I've tried again after restarting the computer, unplugging and restarting the printer and still it won't work.
The tiny printer icon appears briefly in the bottom tool bar, acting like it wants to print, but then nothing happens.
Please advise.

Hi there,
Try downloading and running the print and scan doctor located here:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03275041&cc=us&dlc=en&lc=en
It can fix a lot on its own and if not give a better idea of what is going on.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Installing HP PSC 1350 all-in-one printer/scanner

In the past, I could usually solve the "Offline" or "Not Connected" problems by unplugging my printer for a few minutes, but that no longer works. So, I decided to buy another one. However, just before clicking on the BUY button on Amazon, I decided to try to fix the problem one more time. Part of the "fix" was deleting my printer from the computer and then reinstalling it. This is where I'm now stuck. I deleted it, but I can't reinstall it. I get to the ADD window, but everything is grayed out. So, how do I install my printer? I might add that the HP instructions that I was following (OSX v. 10.9 Mavericks- Installing and using the printer on a Mac) are what got me this far.

Have you installed the v10.9 Mavericks compatible driver yet >> Software & driver downloads HP PSC 1350 All-in-One Printer | HP® Support
After you download the driver, open System Preferences > Printer & Scanners > Print
Delete the current printer by selecting it then click - (minus)
Then click + to add the printer back in.
That should load the driver for you.

Can I simply just use my Time Capsule as a normal External Hard drive? A wireless external hard drive?

Can I simply just use my Time Capsule as a normal External Hard drive? A wireless external hard drive?

I am not sure what you mean by normal external but yes, it is a network hard disk drive.. and you can use wireless.. the only trouble then is, if there is no ethernet connection and internet is by wireless to a different router, then you cannot do both at once.

Wireless Router with USB + External Hard Drive = Time Capsule?

So I bought a TP-Link WR710N wireless router http://www.tp-link.com/en/products/details/?model=TL-WR710N which seems to support external storage in its USB port. I tried with various storage media and it kinda works. The bad thing is that it only sees NTFS drives. I tried an external hard drive formated for Windows and a USB stick, also formated for Windows and it discovered them. But when I tried my external hard drive which is formatted as Mac OS Extended (Journaled), which I was using for Time Machine, it couldn't see it. Neither the TP-Link software, nor the Time Machine software.
Is there any way I could use this router with this hard drive for wireless backing up with Time Machine NOT buying extra equipment (NAS, AirPort Extreme or Time Capsule) ?
Thanks.

m3adi3c wrote:
Is there any way I could use this router with this hard drive for wireless backing up with Time Machine NOT buying extra equipment (NAS, AirPort Extreme or Time Capsule) ?
Thanks.
No
Take it back and get a Time Capsule or keep it and buy a regular external drive and connect it to the Mac directly.

HP psc 1350 all-in-one printer

Re HP psc 1350 all-in-one printer, it it possible to connect a usb wirless adapter into this printer, so that it effectively becomes a wireless printer? (dumb question? but thanks in advance anyway)
This question was solved.
View Solution.

You need a device called a wireless print server. Get one with a usb interface. Here is an example of one.
WPS

Core package driver missing

I'm running Windows 7 professional and can't install my envy 5530 printer due to the above error message - have tried downloading various fixes but all require me to pay money to some comp-any that I have never heard of. Is there a simple solution to this - I have followed the suggested fixes proposed by the hp device doctor and wizard but no success. What is the windows 7 core package driver?

Hello pmak,
Welcome to the HP Support Forums!
Regarding the install issues with the ENVY 5530 on Windows 7, would it be possible to provide a screen shot of the "core package driver missing" error, this way I will be able to see if there is an error number that goes along side it?
Also, what had been the results / steps the Print and Scan Dr and the Printer Install Wizard?
additionally, what is the brand and model number of the computer?
Is this the software you are trying to install: HP ENVY 5530 e-All-in-One Printer series Full Feature Software and Drivers, or is it this: HP ENVY 5530 e-All-in-One Printer series Basic Driver?
Hope to hear back.
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Hidi2c.sys driver missing; throws Event ID 45 from ServerManager-ManagementProvider

At 10-minutes intervals, Event ID 45 from ServerManager-ManagementProvider is appearing in the ServerManager-ManagementProvider log.
The event message text is "Failure opening metadata of the owning provider for channel: Microsoft-Windows-SPB-HIDI2C/Analytic [hResult = Function failed during execution., hLastResult = The system cannot find the file specified.]
The referenced log channel (Microsoft-Windows-SPB-HIDI2C/Analytic) does not appear in Event Viewer, but is included in the Registry, and its Enabled REG_DWORD value is set to 1. The root cause, however, seems to be that the driver file
C:\Windows\System32\drivers\hidi2c.sys is missing.
Is there a solution or a workaround?
Thanks.

Hi,
You may copy that file form other server.
Since this is Windows Server 2012 RC version, we don’t have related KB or description document for that.
But I think this issue will be fixed in product version.
Thank you for your understanding.
Have a nice day!
For more information please refer to following MS articles:
Device Enumeration
http://msdn.microsoft.com/en-us/library/windows/hardware/hh825914(v=vs.85).aspx
Filter driver above hidusb
http://social.msdn.microsoft.com/Forums/nn-NO/wdk/thread/3dcde41e-20cf-4df1-935a-e62dc12db592
Connection IDs for SPB-Connected Peripheral Devices
http://msdn.microsoft.com/en-us/library/windows/hardware/hh698216(v=vs.85).aspx
Lawrence
TechNet Community Support

Cannot get my PSC 1350 printer operating anymore from OS 10.6.3

I have been facing quite an unexpected regression over the last couple of days
My kid told me the scanner option of PSC 1350 All-in-One was not working anymore. After some basic testing I arrived to the same conclusion.
I re-installed the printer using the HP installer disk (dated 2005) and could restore the scanner function successfully. Did a Print Test from the HP Director S/W and the test printed successfully. Unfortunately the normal print function from an application (TextEdit, Safari, etc.) regressed and I fail to get it working again until now.
Self-test of the printer is OK. I also repaired permissions with the Disk Utility. But no improvement.
Actually the symptom was when I tried to print, the file falls immediately in the queue list with error. But no error code or anything that could help to follow a track appears, this is why I am now begging some help to Mac wizards
I tried so many different configurations that I pass the historical details. This is driving me mad and this is where I am presently : I uninstalled all HP software and refreshed the printers list. Then I retrieved a PSC 1300 series driver for Mac OX X 10.6 on HP service website with a light of hope that it could finally fix the problem : Inkjet710_6_Print_Mac1.dmg
I ran installation SW and it reported successful installation.
The problem is now that I cannot retrieve any trace of the HP Installer presumably installed and the HP procedure never says clearly in which folder the HP Installer is due to copy.
Could anyone provide me with a clean procedure to :
1. check where the HP Installer may have been written, as running this HP Installer may hopefully be the end of my problems
Else
2. how to cleanse trace of any previous printer installation
3. how re-install from scratch the PSC 1300 series driver in a way that it prints successfully under Mac OS 10.6.3 other than using the HP Installer above.
Thanks in advance to who may help me to get out of the maze.

Gilou, I would suggest calling HP tech support, as this appears to be a problem with the printer, rather than with Snow Leopard. Good luck!

HP PSC 1350 DRIVER MISSING ON WIRELESS/ THERE ON USB

Similar Messages

Maybe you are looking for