HP PSC 1350 ERROR IN BEING ADDED?

i'm using a hp psc 1350.
it works fine with the usb connection, and when plugged into my apexpress unit it shows up in the add printer box with bonjour.
the driver is coming up the same as when connected with usb. BUT when i click add printer it comes up with an error:
"An error occurred while trying to add the selected printer. Error:-9672"
i've been having a lot of trouble getting this thing going, and if anyone is able to offer any assistance i would be very grateful!
thank you!
asher.

Has anyone found a solution to this problem for this specific printer yet? I'll keep searching and post what works

Similar Messages

  • Can't print from Adobe Acrobat 11.0.07 on my MAC OS 10.6 to HP PSC 1350.  Error: PSTOPDFFILTER/PSTOCUPSRASTER FAILED WITH ERR NUMBER 13.  How do I fix it so I can print?

    Can't print from Adobe Acrobat 11.0.07 on my MAC OS 10.6 to HP PSC 1350.  Error: PSTOPDFFILTER/PSTOCUPSRASTER FAILED WITH ERR NUMBER 13.  How do I fix it so I can print?

    i am getting the same error, suddenly, on 10.9.5

  • Firefox has repeatedly gone into "Not responding", needing me to force close it (or it will bomb out eventually) - always with Hotmail, possibly related to "Error! Filename not specified." being added to some e-mails when using FF .... any ideas?

    Not much more to add, other than this current and very interesting thread elsewhere:
    http://www.google.co.uk/support/forum/p/gmail/thread?tid=3ed94668bd00125f&hl=en
    I first picked out Firefox as being a common feature to the words "Error! Filename not specified." being added to e-mails (the thread talks about gmail, but I am finding it with Hotmail too) and other contributors note FF has suddenly started locking up unusually frequently. FF has always been stable for me with Hotmail until now - other (non-email) web sites are okay. I have McAfee Internet Security and Ad-Aware installed, both up-to-date and both show the PC to be clean. I've also updated all plugins etc - again, the problem persists.

    Okay, it's McAfee Site Advisor clashing with Firefox (I'm running FF v3.6.13). Disable McAfee Site Advisor by:
    Firefox > Tools > Add-ons > Extensions > McAfee Site Advisor > Disable and re-start Firefox.
    Stability returns to Firefox, Hotmail no longer locks up and no longer adds "Error! Filename not specified." and a bunch of grey squares to the end of sent e-mails.
    Thanks to those at:
    http://www.google.com/support/forum/p/gmail/thread?tid=7c144d837db89ac6

  • Hp psc 1350 won't scan

    My hp psc 1350 all in one will not scan.  I have windows Vista 32 bit.  I tried for hours looking on here.  i can't scan from the scan button or the other ways some posts said to go to windows photo gallery and even paint.   On windows photo gallery it acted like it was scanning then when I clicked import an error message said jpg would not  allow.  it kind of worked on  paint but I could not size the  paper right and the ink looked like it  was running out but it's not.  I even uninstalled the printer and reinstalled but it changed the name of the printer to exe something.   This is my last try at finding out how to fix this.  Can anybody help? 

    We are going to do two thing, because you have a scanning error like that it could be one of several things. But I take it from your post that you can still print, just not scan. Is that right? 
    First let's run the PSDr, which might fix any small underlying issues automatically :
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c03286146
    Past that, we are going to run a clean uninstallation and reinstallation for the printer :
     First if you use a USB cord, make sure to remove it. Do not plug it back in until the software directs you to. Then go through the Devices and Printers, Programs and Features and Device Manager folders and insure that all copies, files, and programs related to the printer are removed. Then as directed, restart the computer. 
    In the START menu type "%temp%" and press ENTER. Here I want you to press Ctrl+A and hit DELETE. Some of the files will not allow you to delete them, skip those files and delete the majority that allows it. 
    Then follow this link to download the full feature software and drivers for the printer. As an additional note, if you do not have a USB cord for this printer i would highly recommend purchasing one. Parallel cables are notorious for having partial connections simply because of the difference in technology from when they were used and now. 
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00808543&cc=us&dlc=en&lc=en&os=2093&product=306...
    Install that and let me know the result! 
    Have a great day!

  • HP PSC 1350 Series Printer will NOT print from the internet ~ but will print a word document.

    I have an HP PSC all-in-one PSC 1350 Series printer.
    the operating system is Windows XP to the computer it's USB connected to.  
    Earlier this week I was having troubles with the WIFI and IT helpers changed setting on the modem and the router. 
    Still wouldn't work, so a new router is being sent to me.
    To use the internet, I currently have the ethernet cord directed connected to the computer. 
    These past few days the printer worked both printing word documents AND print jobs from the internet.
    NOW IT WILL PRINT NOTHING FROM THE INTERNET.  (ex: email messages, invoices, statements etc)
    I've tried again after restarting the computer, unplugging and restarting the printer and still it won't work.
    The tiny printer icon appears briefly in the bottom tool bar, acting like it wants to print, but then nothing happens.
    Please advise. 

    Hi there,
    Try downloading and running the print and scan doctor located here:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03275041&cc=us&dlc=en&lc=en
    It can fix a lot on its own and if not give a better idea of what is going on.
    Best of Luck!
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • Cannot get my PSC 1350 printer operating anymore from OS 10.6.3

    I have been facing quite an unexpected regression over the last couple of days
    My kid told me the scanner option of PSC 1350 All-in-One was not working anymore. After some basic testing I arrived to the same conclusion.
    I re-installed the printer using the HP installer disk (dated 2005) and could restore the scanner function successfully. Did a Print Test from the HP Director S/W and the test printed successfully. Unfortunately the normal print function from an application (TextEdit, Safari, etc.) regressed and I fail to get it working again until now.
    Self-test of the printer is OK. I also repaired permissions with the Disk Utility. But no improvement.
    Actually the symptom was when I tried to print, the file falls immediately in the queue list with error. But no error code or anything that could help to follow a track appears, this is why I am now begging some help to Mac wizards
    I tried so many different configurations that I pass the historical details. This is driving me mad and this is where I am presently : I uninstalled all HP software and refreshed the printers list. Then I retrieved a PSC 1300 series driver for Mac OX X 10.6 on HP service website with a light of hope that it could finally fix the problem : Inkjet710_6_Print_Mac1.dmg
    I ran installation SW and it reported successful installation.
    The problem is now that I cannot retrieve any trace of the HP Installer presumably installed and the HP procedure never says clearly in which folder the HP Installer is due to copy.
    Could anyone provide me with a clean procedure to :
    1. check where the HP Installer may have been written, as running this HP Installer may hopefully be the end of my problems
    Else
    2. how to cleanse trace of any previous printer installation
    3. how re-install from scratch the PSC 1300 series driver in a way that it prints successfully under Mac OS 10.6.3 other than using the HP Installer above.
    Thanks in advance to who may help me to get out of the maze.

    Gilou, I would suggest calling HP tech support, as this appears to be a problem with the printer, rather than with Snow Leopard. Good luck!

  • GPMC problem: Item has already been added. Key in dictionary: "Key being added:"

    I have the following scenario:    
    I use the Hungarian Windows 7 Professional 64 bit OS
    I use the Group Policy Management Console (GPMC) to connect to a domain controller in a domain environment.
    I try to generate a report for a Group Policy object (GPO) in the GPMC window.
    In this scenario, I experience the following issue:
    I cannot generate the report. Additionally, I receive an error message that resembles the following:  
    Item has already been added. Key in dictionary: "Key being added:"
    I found a KB article for this symptoms:
    http://support.microsoft.com/kb/2254754
    I downloaded the following hotfix to my system:
    Package:
    KB Article Number(s): 2254754
    Language: All (Global)
    Platform: x64
    Location: (http://hotfixv4.microsoft.com/Windows%207/WindowsServer%202008%20R2/sp1/Fix321583/7600/free/415811_intl_x64_zip.exe)
    I unzipped the hotfix. When I started the msu package with my administrator user, the package says the following:
    The update is not applicable for this computer.
    I got the following in my event viewer:
    System
    - Provider
       [ Name]  Microsoft-Windows-WUSA
       [ Guid]  {09608C12-C1DA-4104-A6FE-B959CF57560A}
       EventID 3
       Version 0
       Level 2
       Task 0
       Opcode 0
       Keywords 0x8000000000000000
    - TimeCreated
       [ SystemTime]  2014-09-10T06:31:58.153372600Z
       EventRecordID 2117
       Correlation
    - Execution
       [ ProcessID]  823116
       [ ThreadID]  822724
       Channel Setup
       Computer *******************
    - Security
      [ UserID]  S-1-5-21-1957994488-1606980848-682003330-*****
    - EventData
      UpdateTitle
      ErrorCode 2149842967
      ErrorString
      CommandLine "C:\Windows\SysWOW64\wusa.exe" "C:\Temp\d\Windows6.1-KB2254754-x64.msu" 
    Please help me to solve my problem.
    Thanks in advance,
    Laszlo Farkas

    I don't understand, what do you mean tweak the XML for the filterfile version entry.
    The GPO is the Default Domain Policy. Our AD functional levels (forest, domain) are 2012. If I started GPMC on the domain controller then I do not receive the "Item has already been added..." message, I can open the report succesfully. Our domain
    was on 2003 level before the migration, but we had the same problem ("Item has already been added...")  on Win 7 clients, but on DC with Windows 2003 works well.
    GPMC logging logs the followings when try to open Default Domain Policy on Windows 7 client:
    gpmgmt.log:
    [371c.41c4]  9/10/2014 14:32:21:926  [WARNING] CGPMReport::GenerateReport :ConvertToXml/Html failed with 0x80070057.
    [371c.41c4]  9/10/2014 14:32:21:936  [WARNING] CGPMReport::GenerateReportFromGPO : GenerateReport failed with 0x80070057
    gpmgmtManaged.log:
    Reporting(16568.3)14:32:21 GPO::ConvertToHtml:******The following exception occured:
    *******Message    : Az elemet korábban már felvették. Kulcs a szótárban: „Felhasználói jegy maximális élettartama”; Felvétel alatt álló kulcs: „Felhasználói jegy maximális élettartama”.
    *******StackTrace :
    System.ArgumentException: Az elemet korábban már felvették. Kulcs a szótárban: „Felhasználói jegy maximális élettartama”; Felvétel alatt álló kulcs: „Felhasználói jegy maximális élettartama”.
       a következő helyen: System.Collections.SortedList.Add(Object key, Object value)
       a következő helyen: Microsoft.GroupPolicy.Reporting.Html.Settings.TablePolicySectionTemplate.SetPolicies(IEnumerable policies)
       a következő helyen: Microsoft.GroupPolicy.Reporting.Html.Settings.Windows.Security.SecurityTemplate.AddAccounts(AccountPolicy[] policies)
       a következő helyen: Microsoft.GroupPolicy.Reporting.Html.Settings.Windows.Security.SecurityTemplate.AddSettings(GPOExtensionData securityExtension, GPOExtensionData ipsecExtension, GPOExtensionData saferExtension, GPOExtensionData pkExtension,
    GPOExtensionData wlanSvcExtension, GPOExtensionData dot3SvcExtension, GPOExtensionData napClientMgmtExtension, GPOExtensionData firewallExtension, GPOExtensionData auditExtension, GPOExtensionData srpExtension)
       a következő helyen: Microsoft.GroupPolicy.Reporting.Html.Settings.Windows.Security.SecurityTemplate.SetSecurity(GPOExtensionData securityExtension, GPOExtensionData ipsecExtension, GPOExtensionData saferExtension, GPOExtensionData pkExtension,
    GPOExtensionData wlanSvcExtension, GPOExtensionData dot3SvcExtension, GPOExtensionData napClientMgmtExtension, GPOExtensionData firewallExtension, GPOExtensionData auditExtension, GPOExtensionData srpExtension)
       a következő helyen: Microsoft.GroupPolicy.Reporting.Html.Settings.Windows.WindowsSettingsSectionTemplate.CreateSubsectionTemplates(ArrayList subsections, Hashtable nameExtensionMap)
       a következő helyen: Microsoft.GroupPolicy.Reporting.Html.Settings.Windows.WindowsSettingsSectionTemplate.SetWindowsSettings(IEnumerable extensions)
       a következő helyen: Microsoft.GroupPolicy.Reporting.Html.Settings.MainSettingsSectionTemplate.SetConfiguration(IEnumerable extensionDataList)
       a következő helyen: Microsoft.GroupPolicy.Reporting.Html.Settings.ConfigurationSectionTemplate.AddContent(IEnumerable extensionDataList)
       a következő helyen: Microsoft.GroupPolicy.Reporting.Html.Settings.ConfigurationSectionTemplate.SetConfiguration(GPOUserOrComputerConfig config)
       a következő helyen: Microsoft.GroupPolicy.Reporting.Html.Gpo.GpoReportTemplate.SetGpo(GPO gpo)
       a következő helyen: Microsoft.GroupPolicy.Reporting.GPO.ConvertToHtml()

  • Item has already been added. Key in dictionary: '???' Key being added: '???'

    Since 1 week I am unable to access any of the Sharepoint 2010 sites that exist in my farm. The error that is shozn is:
    Item has already been added. Key in dictionary: '???'  Key being added:
    Here is the stacktrace:
    [ArgumentException: Item has already been added. Key in dictionary: '???' Key being added: '???']
    System.Collections.Hashtable.Insert(Object key, Object nvalue, Boolean add) +10065554
    System.Collections.Specialized.StringDictionary.Add(String key, String value) +89
    Microsoft.SharePoint.SPWeb.GetProperties() +563
    Microsoft.SharePoint.Utilities.SPPropertyBag..ctor(GetProperties getProperties, UpdateProperties updateProperties) +62
    Microsoft.SharePoint.SPWeb.get_Properties() +130
    Microsoft.Office.Server.Utilities.PageUtility.GetPagesListName(SPWeb web) +39
    Microsoft.SharePoint.Publishing.PublishingWeb.get_PagesListName() +152
    Microsoft.SharePoint.Publishing.CachedArea..ctor(PublishingWeb area, String id, String parentId, CachedUserResource title, String url, CachedUserResource description, CachedObjectFactory factory) +3914
    Microsoft.SharePoint.Publishing.CachedArea.CreateCachedArea(PublishingWeb area, CachedObjectFactory factory, String parentId) +590
    Microsoft.SharePoint.Publishing.CachedObjectFactory.CreateWebFromUrlNoUpperCase(String url, Guid webIdHint, String urlCaseHint) +555
    Microsoft.SharePoint.Publishing.WebControls.ConsoleUtilities.IsMasterPageGalleryUrlForSite(Uri uri) +117
    Microsoft.SharePoint.Publishing.WebControls.ConsoleVisibleUtilities.ConsoleAppliesInCurrentContext() +41
    Microsoft.SharePoint.Publishing.Internal.WebControls.PublishingRibbon.OnLoad(EventArgs e) +95
    System.Web.UI.Control.LoadRecursive() +66
    System.Web.UI.Control.LoadRecursive() +191
    System.Web.UI.Control.LoadRecursive() +191
    System.Web.UI.Control.LoadRecursive() +191
    System.Web.UI.Control.LoadRecursive() +191
    System.Web.UI.Control.LoadRecursive() +191
    System.Web.UI.Control.LoadRecursive() +191
    System.Web.UI.Control.LoadRecursive() +191
    System.Web.UI.Control.LoadRecursive() +191
    System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +2428
    Also, when I am trying to access my homepage on the root sitecollection, I see this error:
    The DataSourceID of 'V4QuickLaunchMenu' must be the ID of a control of
    type IHierarchicalDataSource.  A control with ID 'QuickLaunchSiteMap' could not
    be found.

    Recently have you removed, deleted, changed password of any account used in sharepoint.
    Check in > Security > Manage account
    Check in IIS > Application pool, if any pool is stopped.
    If you have a old copy of web.config files, check if they were modified.
    Was any new solution\wsp deployed in farm
    please share ULS logs, event viewer and fiddler traces.
    If this helped you resolve your issue, please mark it Answered

  • Event Receiver:Item is Being Adding Event Recevier Issue

    Hi All,
     * I had written Simple event receviers(Item is Being Adding) to a site at FarmLevel(Farm Solution) and below is the code for it.
    * In below code I am adding the List name to a Column called "Name" ,when Item is being adding the code is getting loop and inserting unwanted data and updating Column "Name" with it instead of updating when item is added
    *Below if u see there is no value in Column "Name" when I insert values "Mark Devis"(Title) and "In Meeting"(Body) columns
    Can any one help me how can I solve the issue
           Code:
    string listitle = properties.List.Title + "" + "is List Name";
    string siteurl = http://sp2010:8080/personal/Sample/;
    using (SPSite mysite = new SPSite(siteurl))
    using (SPWeb myweb = mysite.OpenWeb())
    SPList mylist = myweb.Lists["Announcements"];    
    SPListItem newitem = mylist.Items.Add();
          newitem["Name"] = listitle.ToString();
          newitem.Update();
    Result:
    Samar

    Hello Samar,
    Try to use before/after properties to update item in list on ItemAdding event.
    http://sarveshspn.blogspot.in/2010/05/using-itemadding-and-afterproperties-to_08.html
    http://social.msdn.microsoft.com/Forums/sharepoint/en-US/1ed217b1-9441-4fe1-b3aa-68b2768bdfc7/updating-list-item-value-on-the-itemadding-event-handler-of-an-item-receiver-class?forum=sharepointdevelopmentlegacy
    Also make sure that you have at least contributor right in list to edit data.
    Hemendra:Yesterday is just a memory,Tomorrow we may never see
    Please remember to mark the replies as answers if they help and unmark them if they provide no help

  • Every single website, or link within a website page is being added to my location bar/address bar drop down menu. How can I stop this? This just started happening.

    Every single website url address, or url address within a website page is being added to my location bar/address bar drop down menu.
    I don't want everything added or saved in the location bar. Only urls that I used a lot used to be saved there but now every single url (and url within a url)I visit is being added to it.
    How can I stop this? This just started happening.
    I'm sure it's a simple browser setting but I've checked and nothing gives an option to control this.
    Firefox 3.0.17
    Windows XP
    == User Agent ==
    Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.0.17) Gecko/2009122116 Firefox/3.0.17

    A possibility is to open the links via the right-click context menu or a middle-click in a new tab to make sure that Firefox sees them as regular links.

  • Time Machine error message while restoring..."an error occurred while adding a recovery system to the destination disk

    I had to change my hard drive in my MBP 15".  I use Time Machine on a Time Capsule for backup.  I am booting up my laptop with a bootable USB key.  I have partitioned my new hard drive (bigger than the old one) and named it Macintosh HD (same as the old one).  I select the option to restore from Time Machine Backup.  I select one of my latest backup....select my destination drive...the restore process starts but stop within minutes with the following message.  "An error occurred while adding a recovery system to the destination disk"  It then prompts me to restart....
    I need your help...what can it be.
    Thanks

    I've encountered this issue when the Time Machine was encrypted with FileVault.
    Article:  HT4718
    Additional Information
    Please note that OS X Recovery must be present on the computer's startup volume in order to use FileVault 2. Using RAID partitions or a non-standard Boot Camp partition on the startup disk may prevent OS X from installing a local Recovery system. See "OS X: Some features of Mac OS X are not supported for the disk (volume name)" for more information.
    What seems to work, is reinstalling the OSX from the internet, and then using migration assistant to pull the user from the time machine backup external when logged into a temporary administrator user to move the original user back over.
    Perhaps if you're stubborn, what would work is the following from the same article:
    What to do if the installer warns that no Recovery System can be created
    Some disk partition configurations may result in the OS X installer reporting that it could not create a Recovery System. In these situations, even if you are permitted to continue the install, you may want to quit the installation and create an external, bootable OS X hard drive with a Recovery System, first. You can continue your OS X upgrade on your computer's startup drive after creating an external Recovery System.
    Your storage device must have at least 13 GB available (after formatting) to install OS X Lion or later and a Recovery partition.
    These steps erase and reformat the storage device. This article instructs you on setting up a storage device to use the GUID partition scheme and the Mac OS Extended (Journaled) format, which are required to install OS X and a Recovery partition on your external storage device. You should back up any important files that are on the device to a different drive.
    This procedure installs a version of OS X that is compatible with the Mac it was created with. Using this OS X system with a different Mac model may produce unpredictable results.
    Your computer's serial number is sent to Apple as part of this process to help authenticate your request to download and install OS X Lion.
    All of this information was collected by browsing through the public articles on the Apple Support website.

  • Error Message while adding Item in Item Master Data- [Microsoft][SQL Server Native Client 10.0][SQL Server]Conversion failed when converting the nvarchar value 's008 01' to data type int. (CINF)

    Dear Experts
    I am getting the following error message while adding item in Item Master data. I have modified the following SBO_SP_transactionNotification in SQL server after that could not able to add the item
    ALTER proc [dbo].[SBO_SP_TransactionNotification]
    @object_type nvarchar(20),                      -- SBO Object Type
    @transaction_type nchar(1),               -- [A]dd, [U]pdate, [D]elete, [C]ancel, C[L]ose
    @num_of_cols_in_key int,
    @list_of_key_cols_tab_del nvarchar(255),
    @list_of_cols_val_tab_del nvarchar(255)
    AS
    begin
    -- Return values
    declare @error  int                       -- Result (0 for no error)
    declare @error_message nvarchar (200)           -- Error string to be displayed
    select @error = 0
    select @error_message = N'Ok'
    --    IF @OBJECT_TYPE = '59' AND (@TRANSACTION_TYPE = 'A' or @TRANSACTION_TYPE = 'U')
      BEGIN
       IF EXISTS(
        SELECT T0.Price FROM IGN1 T0
        where  IsNull(T0.Price, '0') = '0' and T0.DocEntry = @list_of_cols_val_tab_del)
       BEGIN
        SELECT @ERROR=1,@ERROR_MESSAGE='Please insert the price !'
      END
    end
    -- Select the return values
    select @error, @error_message
    end

    Hi Rathna,
    Just put the SP like this, without the -- before the IF. A -- marks the line as a command therefore you need to uncomment and it will work.
    IF @OBJECT_TYPE = '59' AND (@TRANSACTION_TYPE = 'A' or @TRANSACTION_TYPE = 'U')
      BEGIN
       IF EXISTS(
        SELECT T0.Price FROM IGN1 T0
        where  IsNull(T0.Price, '0') = '0' and T0.DocEntry = @list_of_cols_val_tab_del)
       BEGIN
        SELECT @ERROR=1,@ERROR_MESSAGE='Please insert the price !'
      END
    end
    Hope it helps

  • I keep getting the message on iTunes that my Shuffle (which is current on updates) needs to be restored.  It is showing up in devices, but when I try to add songs to it, I don't get the little progress bar showing me that the song is being added. ***?

    I updated to the new iTunes last week.  Today I plugged in my 4th generation Shuffle to add some new songs.  The shuffle appears in Devices, but when I try to add songs, I'm not getting the progress bar at the top of the screen, so I'm assuming the song isn't being added.  I tried ejecting the Shuffle and plugging it in again, and I got a message that my iPod needed to be restored before it could be used with iTunes -- even though the screen also said the Shuffle is up to date on the software. I finally gave in and restored it, but I continue to get the same message.  When I eject the iPod and try to play it now, I'm getting nothing, and when it is connected to the usb port, the orange light is continually flashing.  I've been trying to figure this out for about 3 hours now, so if anyone could help me, I'd be eternally grateful!

    The 1st and 2nd gen shuffles do not have an automatic syncing mode, like later shuffles and the "big" iPods.  It is maintained manually (or by using the Autofill feature).
    If the iTunes sidebar (along left side of window) is hidden, from the menu bar, under View, select Show Sidebar.  The shuffle appears in the sidebar, under DEVICES, when connected.
    To add songs to the shuffle...  Show a list of songs in the iTunes window.  For example, you can select Music under LIBRARY (in the sidebar) to show your complete iTunes music library list.  Select a song and drag it to the shuffle in the sidebar.  You can do this with more than one song selected.  Alternately, select the song(s), right-click the selection, and choose the command to Add to Playlist -> [name of iPod].
    To remove songs from the shuffle...  Select the shuffle in the sidebar.  To the right, it's Settings screen is shown.  Toward the top, where it says Settings, click on On This iPod (to the right).  The list of songs on the shuffle is shown below.  Select the song you want to remove and press Delete on the keyboard.  You can do this with more than one song selected. 
    NOTE:  At the bottom of the shuffle's list of songs, there are controls for the Autofill feature.  You can also use Autofill to fill your shuffle from your music library or from a specific playlist.

  • Installing HP PSC 1350 all-in-one printer/scanner

    In the past, I could usually solve the "Offline" or "Not Connected" problems by unplugging my printer for a few minutes, but that no longer works. So, I decided to buy another one. However, just before clicking on the BUY button on Amazon, I decided to try to fix the problem one more time. Part of the "fix" was deleting my printer from the computer and then reinstalling it. This is where I'm now stuck. I deleted it, but I can't reinstall it. I get to the ADD window, but everything is grayed out. So, how do I install my printer? I might add that the HP instructions that I was following (OSX v. 10.9 Mavericks- Installing and using the printer on a Mac) are what got me this far.

    Have you installed the v10.9 Mavericks compatible driver yet >>  Software & driver downloads HP PSC 1350 All-in-One Printer | HP® Support
    After you download the driver, open System Preferences > Printer & Scanners > Print
    Delete the current printer by selecting it then click -  (minus)
    Then click + to add the printer back in.
    That should load the driver for you.

  • Preventing help files being added to start menu after installing an application in windows 8.1 enterprise

    Hi Guys
    when we install an Application in windows 8 family, we see that in addition of Application executable file, user manuals (.chm) and PDF & other files related to that App are added to start menu (when we click down Arrow which shows all programs) and
    so the start menu gets quit messy.
    is there any settings to make only applications executable file be added to start menu & prevent other types of files related to that App being added here?
    thanks in advanced

    Hi John,
    This issue is related to the programs package we installed.
    • An installation package contains all of the information that the Windows Installer requires to install or uninstall an application or product and to run the setup user interface.
    • The developer can specify installation context, and based on these properties, Windows Installer automatically redirects the values of folder properties and registrations to locations.
    • The shortcut is added to the profile by these context
    We could right click these file and could find out they are the shortcut mentioned above.
    For more information about Windows Installer, please refer to the following article.
    http://msdn.microsoft.com/en-us/library/windows/desktop/dd765197(v=vs.85).aspx
    Best regards,
    Fangzhou CHEN
    Fangzhou CHEN
    TechNet Community Support
    hi Fangzhou
    useful link
    thanks a lot

Maybe you are looking for