HP PSC 1410 All-In-One printer problem!

I have a PSC 1410 for a while now and I reinstalled Windows 7 recently and now the printer's not detected but I can scan documents. What could be the problem? It was working fine before I reinstalled Windows 7 and I've obviously installed the drivers.

Click here for troubleshooting tips for blinking lights on the PSC 1400 series printers.
Regards,
Bob Headrick, Microsoft MVP Printing/Imaging
Bob Headrick,  HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Similar Messages

  • HP PSC 1410 All in one Printer not installed

    In windows 8 after complete and lastest installation of Driver of HP PSC 1410v All in one, in the Control Pannel, Device and Printer Tab only scanner icon is showing no any printer icon and no other HP Icon, so i can use scanner only of this model but not printer. After reading suggestions I install the windows 7 driver in windows 8 after solution of fatel error here is also only scanner is showing no facility for printing, please help me where I am wrong or whats solution fast plzzzzzz.

    Hello Jai_pareek,
    Welcome to the HP Support Forums! I see you would like to install your HP PSC 1410 to your computer running the Windows 8 Operating system. You tried downloading the Windows 7 driver but are now getting a fatal error. Please go ahead and start with the steps listed below:
    1. Unplug the USB if using a direct connection.
    2. Remove the HP PSC 1410 software from your computers Control Panel's Uninstall a program option.
    3. Restart the computer.
    4. Make sure ALL the PSC 1410 software is gone from the programs list as well as your HP folder listed under the All programs in your Start Menu.
    5. Now go ahead and download the software and drivers for your PSC 1410 (DO NOT plug in USB until the software prompts you to):
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloa​dIndex?softwareitem=al-110055-2&cc=us&dlc=en&lc=en​...
    6. Go ahead and print a test page.
    7. If you are unable to print a test page, please run the HP Print and Scan Doctor- It was designed by HP to provide users with the troubleshooting and problem solving features needed to resolve many common problems experienced with HP print and scan products connected to Windows-based computers.
    Please let me know if this was successful! I will watch for your reply.
    Thank you,
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • Re: how do i install a hp psc 1410 all in one printer without the disk?

    how to install?

    lection wrote:
    how to install?
    Install what?  If it is the PSC 1410 then what operating system? Do you have a 32 bit or 64 bit version?  See my post here.
     If a different printer model please start a new thread after reading  this post and then provide some details.  What printer model? What operating system? How is the printer connected - USB, wired LAN, Wireless LAN, bluetooth?
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Hp-psc 1317 all-in-one printing problems

    I have a hp psc 1317 printer scanner.  It is connected to my laptop running Windows Vista.  Recently the print quality diminished until now when I print a document it sounds like printing is happening but there is no mark on the paper whatsoever.  
    Today I downloaded and installed the HP Solution Centre software.  My ink levels are pretty full and when I attempt a test document the software doesn't seem to think there is a problem although still nothing is printing on the paper.
    I am completely confsued as to what is causing this problem.  The only thing I can think might be connected to the problem is that in the printer window of the control panel two printers are showing: hp psc 1310 and hp psc 1310 (copy 1).  I'm not sure why the printer has been listed twice but I have  chosen each printer in turn and attempted to print a document.  When the 'original' printer is selected nothing is printed at all but if I select the 'copy' printer it goes through the process described above.
    There is obviously not a problem with ink levels and the printer and computer are communicating but something somewhere is going wrong and I'd love someone's help if at all possible.
    Thanks so much
    Chris

    This article should help resolve your blank pages:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01892627&cc=us&dlc=en&lc=en
    Give the steps listed under your operating system a try and let us know if it helps.
    Best of Luck!
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • HP PSC 1315 All in one printing problem

    My printer only prints text in red in the body. It will print black along the top and bottom of the paper.  It also prints in black when I copy something.  I put in new fresh cartridges.  What can I do?

    What program are you printing from?  It would appear your are printing in graphics mode (rather then black text) and that your printer is running out of cyan ink.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Psc 1310 all-in-one printer problem

    Every so often my psc1310 printer goes into "Deleting..." when it is instructed to erase a message. Disconnecting, closing and  reopening the computer, etc., does no good. It usually requires uninstalling and reinstalling the printer program to get rid of the problem.
    Is there a more convenient way of solving it?

    Hi,
    Check the link below:
    Scanning with HP Director Software in Windows XP
    ** Say thanks by clicking the "Thumb up" icon which is on the left. **
    ** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

  • HP PSC 1410 All In One, have driver problems..​..........​..........​.........

    I have an HP PSC 1410 All in one printer that I cannot print items from my computer on. When I try to print something from my computer my computer tells me that no driver for the printer  is detcted but when I open "MY COMPUTER" and click Devices, it shows the printer listed as operational and that it is functioning properly. 

    I tried installing the driver and couldn't so I called HP and found out the printer is obsolete and no drivers are available........ they don't support that model anymore , So I'm screwed................

  • HP PSC 1410 All in One HANG INDEFINITELY with Remote Downlevel Document

    Hi, after a few days of setting up my PSC 1410 All In One Printer, which is hooked up to a Compaq Presario V3000 running on Windows XP SP3 with AMD Turion 64x2 processor; and shared print to a Sony Vaio VGN FW33G, and a Mac Pro running on Snow Leopard OS X 10.6
    Just yesterday, my printer was jammed with a "Remote Downlevel Document" which I can't remove after using these methods I've researched: 
    1. "Right Click and Cancel" x [indefinite] times
    2. "Right Click and Refresh" x [indefinite] times
    3. "Restart" x [indefinite] times
    4. "Restart" with printer hooked on/off to the USB x [indefinite] times + [indefinite] combinations of whichever comes first
    5. "Unhook USB and Click Start>Run "net stop spooler" and Rehook USB and Click Start>Run "net start spooler" x [indefinite] times
    6. Did virus scan for suspicious virus using Anti Vir
    7.  And in between, combinations of the above x [indefinite] times
    8. Search on the internet which obviously there's no real solution
    Please help.
    Regards,
    Bobby 

    Am (attempting) to print direct from my MacBook - admittedly I did not install any printer drivers during the Leopard (clean) install and am a bit confused as to whether I'm now using the right one, but from what I can gather from the threads like this now littering this forum it wouldn't have made much of a difference. I had infact presumed my problem was just that - that I hadn't the right driver.
    Like I hinted at previous; I can reconnect the HP to my old G4 running Tiger and print with no trouble whatsoever.
    Trying to print from Leopard brings up the print dialog, and subsequent utility as it should but then nothing - as if the MacBook's not talking with the HP (though it happily recognises it as being there and what model it is etc.).
    I have not yet attempted to print over the network, mainly because I couldn't succeed as is. Or tried to scan as it happens (I hardly ever use the built in scanner as I have a better one and the PSC is my backup - I scan a lot in my job).

  • HP Psc 1410 all in one series Printing pink

    Printer - HP Psc 1410 all in one series
    Operating system - Microsoft windows Vista 32 bit
    Ive installed the driver and the software but when i print colour the colour is pink. When I print in black and white it prints fine jsut colour is all pink.
    Jamie

    Please click here for a possible solution to your problem:
    http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&dlc=en&cc=us&product=441115&docname=c00313147
    Let me know if that helps.
    Please click on KUDOS if you find my solution helpful.

  • Hp psc 1315 all-in-one printer

    I have installed a hp psc 1315 all in one printer on my new Mac OS X version 10.9.5.
    While I can print without any problems, I don't have access to scan a document from the printer to my computer.
    Can anyone help with this?
    Thank you.

    Hello @annlf 
    Welcome to the HP Community!
    I hope to help you with the scanning concern you have today.
    Unfortunately, you will not be able to scan using HP software with your PSC 1315 (older model), on Mavericks (newer OS X), as there is no Full Feature driver (includes scanning software) available.
    However, you do have some other options to scan. See this link for your options. Scroll down when the guide loads and select "How do I scan with the driver from Apple Software Update?"
    OS X v10.9 Mavericks: Installing and Using the Printer on a Mac
    Have a wonderful Wednesday
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Installing HP PSC 1350 all-in-one printer/scanner

    In the past, I could usually solve the "Offline" or "Not Connected" problems by unplugging my printer for a few minutes, but that no longer works. So, I decided to buy another one. However, just before clicking on the BUY button on Amazon, I decided to try to fix the problem one more time. Part of the "fix" was deleting my printer from the computer and then reinstalling it. This is where I'm now stuck. I deleted it, but I can't reinstall it. I get to the ADD window, but everything is grayed out. So, how do I install my printer? I might add that the HP instructions that I was following (OSX v. 10.9 Mavericks- Installing and using the printer on a Mac) are what got me this far.

    Have you installed the v10.9 Mavericks compatible driver yet >>  Software & driver downloads HP PSC 1350 All-in-One Printer | HP® Support
    After you download the driver, open System Preferences > Printer & Scanners > Print
    Delete the current printer by selecting it then click -  (minus)
    Then click + to add the printer back in.
    That should load the driver for you.

  • Not able to install scanner part of 'HP PSC 1410 all-in-one'[SOLVED]

    Despite trying instructions in the wiki, checking earlier reports of this problem on the forum and trying on reports from google, I am not able to install the scanner part of 'HP PSC 1410 all-in-one'.  The command 'sane-find-scanner' finds it but 'scanimage -L' does not. Also xsane and simple-scan program do not find it. Any help will be appreciated.
    (I also tried these entries in the udev sane rules:
    ATTRS{idVendor}=="03f0", ATTRS{idProduct}=="4d11", MODE="0664", GROUP="scanner", ENV{libsane_matched}="yes"   
    "SUBSYSTEM=="usb_device", ATTRS{idVendor}=="03f0", ATTRS{idProduct}=="4d11", PROGRAM="/bin/sh -c 'K=%k; K=$${K#usbdev}; printf bus/usb/%%03i/%%03i $${K%%%%.*} $${K#*.}'", NAME="%c", MODE="0666", GROUP="scanner", ENV{libsane_matched}="yes"
    but they do not work).
    Some previous threads:
    https://bbs.archlinux.org/viewtopic.php?id=107474
    https://bbs.archlinux.org/viewtopic.php?id=65431
    Not able to install sane-dev from AUR; 'makepkg -s' gives error:
    ==> WARNING: Cannot find the git binary required to determine latest git revision.
    Last edited by rnarch (2012-03-28 05:05:09)

    Git was not installed. So I installed it and ran 'makepkg -s' again. It ended with following error:
    installing saned.conf in /etc/sane.d/saned.conf...
    installing dll.conf in /etc/sane.d/dll.conf...
    for dir in artec_eplus48u gt68xx snapscan epjitsu ; do \
      /bin/sh ../mkinstalldirs /home/sane-dev/pkg/usr/share/sane/${dir} ; \
      done
    mkdir -p -- /home/sane-dev/pkg/usr/share/sane/artec_eplus48u
    mkdir -p -- /home/sane-dev/pkg/usr/share/sane/gt68xx
    mkdir -p -- /home/sane-dev/pkg/usr/share/sane/snapscan
    mkdir -p -- /home/sane-dev/pkg/usr/share/sane/epjitsu
    /bin/sh ../mkinstalldirs -m 775 -g uucp /home/sane-dev/pkg/var/lock/sane
    Usage: mkinstalldirs [-h] [--help] [--version] [-m MODE] DIR ...
    Create each directory DIR (with mode MODE, if specified), including all
    leading file name components.
    Report bugs to <[email protected]>.
    make[4]: *** [install-lockpath] Error 1
    make[4]: Leaving directory `/home/sane-dev/src/sane-backends/backend'
    make[3]: *** [install-data-am] Error 2
    make[3]: Leaving directory `/home/sane-dev/src/sane-backends/backend'
    make[2]: *** [install-am] Error 2
    make[2]: Leaving directory `/home/sane-dev/src/sane-backends/backend'
    make[1]: *** [install] Error 2
    make[1]: Leaving directory `/home/sane-dev/src/sane-backends/backend'
    make: *** [install-recursive] Error 1
    ==> ERROR: A failure occurred in build().
        Aborting...
    Please note the line: Report bugs to <[email protected]>.   Is it a bug?  Sane-dev was successfully installed by others, eg: https://bbs.archlinux.org/viewtopic.php?id=65431
    Last edited by rnarch (2012-03-26 01:11:57)

  • HP PSC 2355 all-in-one printer cuts off bottoms of letters

    My HP PSC 2355 All-In-One Printer cuts off the bottoms of letters. Photos are fine. 3rd HP black cartrige, got worse today.
     On a Mac, 10.9.3.

    Hi @timed 
    I would like to help you with your 2355 printer. A printer reset can initiate an alignment. Please use the following document to troubleshoot the issue, and let me know the outcome of your efforts; Troubleshooting Print Quality Problems with the Diagnostic Page.
    If the issue remains unresolved after following all of the steps in the link above, I recommend contacting HP.
    Don't hesitate to call, although the printer may be out of warranty, the cartridges could be in warranty; therefore, there wouldn't likely be a fee for the phone support. HP will, at HP's option, either replace products under warranty that prove to be defective or refund the purchase price.
    They could even determine after troubleshooting that it is a problem with the printer, in which case they may offer you a discount on a newer model.
    The number to call HP is 1-800-474-6836 for Canada and US, or you can Contact HP Worldwide.
    To find the “Warranty Ends” date, look in the following table for the date's location on each product. The date follows the YYYY/MM/DD or YYYY/MM format, where YYYY indicates the year, MM indicates the month, and DD indicates the day.
    I hope this helps.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • HP PSC 1310 All-in-One Printer

    Hi
    I need to download the the full set of drivers & software so i can install them on a friends computer who does not have a internet connection yet and will not for a while yet..
    the only ones i can see need to connect to the internet to download the drivers..
    Printer = HP PSC 1310 All-in-One Printer
    Operation system  = Windows 8.1 x64
    PS: Why do printer companies make it so difficult to download the full set of drivers\software when people have spent good money buying there printers.... i get asked this question a lot but people....
    thanks
    We all make mistakes said the Dalek climbing off the Dustbin.

    Hello,
    Full feature driver is available for download for this model. Please select the OS from the drop down list first and then select next to download the driver.
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=2093&lc=en&cc=us&dlc=en&sw_lang=&product=3745...
    I work for HP but my posts and replies are my own.
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as Accepted Solution

  • PSC 1510 All in one printer - won't print even black and white when colour cartridge not recognised

    My PSC 1510 All in one printer is flashing the "check printer cartrige icon" and both "Black" and "Colour" icons at the bottom left of the printer.
    It won't print at all, even when I select grayscale (black and white). The help pages tell me that if I remove the colour cartridge the printer will switch to backup mode and I'll still be able to print in black and white (though not copy or scan). But this is not the case, and I can find no way of switching manually to backup mode. The help pages have no useful explanation of backup mode. I've also tried cleaning the cartridge (which I'm pretty sure isn't empty) but that makes no difference.
    Can anyone help? I'd be very grateful.  

    gabri21 wrote: I have a very similar problem with my PSC1510 but only the colour cartridge light is blinking. I am also unable to find any useful information to set up printing in back up mode. Can anyone assist in resolving this problem for us?
    With only one cartridge light blinking I would suspect the cartridge, they do rarely fail (much more often for reman cartridges, see here).  Clean the cartridge contascts as shown here.  If that fails and the cartridge is an original HP then check the warranty date as shown here.  If the cartridge is in warranty return it to your dealer for a warranty replacement.
    The printer will automatically switch to backup mode if the black (or color in some printers) cartridge is removed.  I do not know if this works with the PSC 1510, some all-in-on devices insist on having both cartridges present.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Maybe you are looking for