HP PSC 1410 doesn't turn on

Hi all,
I own an HP PSC 1410 All in one printer and it has been working fine until today, when i tried to turn on and it didn't work. The point is that once plugged into the current supply, the printer seems to be fine as there is the led that turns on as always, but after that, if i try to turn it on by pressing the power botton, then it doesn't work. I'm not sure if it is a problem of the printer or of the AC adpater, can you help me to sort out and fix the problem ?
Thanks in advance.

HI safwanthegreat,
Does the ac adapter get hot after being plugged in for about 10 or 15 minutes ? If so then the power adapter is probably ok.
If I helped you at all it would be great if you clicked the blue kudos star!
If I solved your post please mark it as solved to help others.
I'm a printer tech with HP.

Similar Messages

Chooser problem with HP PSC 1410 and HP Deskjet 5940 on Classic

Excuse me for my bad english, I am french... !!!
I have just bought macmini with HP DeskJet 5940 promotion. I installed internet last driver for it. Printing is OK with Mac OS 10.4.4 but doesn't work with Classic. Printer is connected by USB port. I tried with another HP printer : HP PSC 1410. It doesn't work too under Classic.
When I try to print under Classic from SimpleText, I obtain the message : "SimpleText ne peut imprimer un autre document pour le moment. Utilisez le sélecteur pour choisir une imprimante". I translate in english : "SimpleText can't print another document for this time. Use chooser to select a printer."
I open chooser and click on LaserWriter8 as indicated in documentation. I obtain a new message : "LaserWriter8 requiert AppleTalk. Assurez-vous que vous êtes bien connecté au réseau AppleTalk." I translate in english : "LaserWriter8 asks AppleTalk. Be sure that you are connected to AppleTalk net.". I click on OK and two new message appears : "Impossible d'ouvrir AppleTalk". I translate in englisk : "Can't open AppleTalk" and "Pour activer AppleTalk, ouvrez les préférences Réseau et cliquez sur AppleTalk". I translate : "To activate AppleTalk, open net preferences and click on AppleTalk". Evidently, that is already made !
But it is absolutely necessary that I can use deskjet printers under Classic with my macmini which runs on Mac OS 10.4.4 !
I turn around the problem and I don't find solution. Have you some ideas ?
Thank you for your help !

Pardon: je parlais Francais comme une vache espagnol et unless HP specifically says so, there is no guarantee that any modern printer will work in Classic - partly because printer manufacturers don't bother with aging software, and partly because some printer manufacturers seem not to understand that Classic over OS X deals with printers very differently from the way pure, bottable OS 9 does.
If you have a freshly installed OS X with a freshly installed Classic 9 and the right versions of HP's drivers and utilities, it should work - but if any of those is not freshly installed, there might be third-party components interfering.
If all-fresh software doesn't work, launch Apple's own Desktop Printer Utility and tell it to create a virtual Desktop Printer with Translator Postscript.
Even though it doesn't actually appear on the Desktop, that will become the default printer for Classic, accessible thorugh Chooer's LaserWriter driver.
Try again to print from SimpleText but set the dialog to Print to File, which should create a .ps file that can be dragged onto any X print queue, where it should just print! (To find an X print queue, Print from any X application and tell the Dock to Keep the icon)
That method is not guaranteed, but it does work for most people with most printers.

Can't print from iBook G4 via Windows XP to an HP PSC 1410

Hello,
I realize this question is very similar to others on this discussion but I haven't been able to find an answer to my problem.
I cannot print from my iBook via XP to an HP PSC 1410.
I can print from my iBook via XP to an HP LaserJet 4L.
I was able to print from my iBook via XP to an HP882C that was connected
to the same USB port that the HP PSC 1410 is connected to now.
I have an iBook G4 running 10.4.3
I have a PC running XP with an HP LaserJet 4L on a parallel port and an HP PSC 1410 on a USB port.
I installed the following from http://www.linuxprinting.org/macosx/hpijs/
hpijs-foomatic-2.02.ppc.dmg
espgs-7.07.1.ppc.dmg
HP-PSC_1400-hpijs.ppd
I think I correctly followed the instructions at:
http://www.ifelix.co.uk/tech/3015.html
They worked for the LaserJet printer.
When I attempt to print from the iBook to the 1410 the HP doesn't print at all.
I don't see any error messages on the iBook. The document gets spooled onto the Windows print spooler, the printer even starts making noises, the print heads move about a bit and then stop. The print job just sits there in the queue with a status of "Printing". The print job is then stuck and hard to delete.
I don't need to be able to scan or check ink levels from the iBook.
I would just like to be able to do color printing.
What else should I try? Given the symptoms where might I be going wrong?
Any suggestions would be appreciated.
iBook G4 Mac OS X (10.4.3) 1 Gig RAM

I found the answer to this problem on Linux printing provided by Steve Stuart.
Dave
Steve Stuart wrote at: http://www.linuxprinting.org/forums.cgigroup=linuxprinting.macosx.general;articl e=1446
Hi all,
I finally figured out what the issue was, Why it fixes it I can not say,
but it does.
On the Shared printer on the Windows side, go to the properties of the Printer.
Go to the Ports tab, and deselect the "Enable bidirectional Support" (do not
have it checked). Once this is done and you also do not have any firewalls
setup on the Windows machine (Windows, MCAfee, Norton, ....). You should be
able to print.
Finally!!!!! I hope this helps many many people. As I have had many
people asking for the solution if I found it.
Thanks,
Steven Stuart

All-in-one PSC 1410

I was having lines trying to print in colour so I figured the ink was low. Changed cartridges with the proper HP coulour cartridge # 22 and all it does is print black? Anyone had this problem before? The old cartridge printed coulour but the new one doesn't - is this a cartridge mistake by HP or is there something wrong with the printer?
Thanks for your help

Hi acrylic,
I understand you have a PSC 1410 that will only print in black despite you changing the color cartridge to a brand new one. I will certainly do my best to assist you with this.
I would recommend that you follow this Check Print Cartridge Light Blinking document as it will guide you in cleaning the copper contacts of the cartridge and reseating it. You can also have a look through this Missing, Faded or Dull Colors document for a few extra steps.
If the issue persists after this, you can certainly check the warranty date on the cartridge, and if it's in warranty you can call HP Tech Support for your area and inquire about a cartridge replacement.
Hope this helps, have a great day!!
Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
**MissTeriLynn**
I work on behalf of HP

PSC 1410 shows E and all leds blinking

Hi there everyone!
I'm not an english speaker, but I will try to do my best in order to explain myself as clear as possible. This is the fact, I recently acquired a PSC 1410 a year ago. I know the previous owner bought it on 2006 and it was working properly till a month ago when the tricolor cartridge blew up inside the printer, literally. I turned on the printer and it showed me the Error message and all the panels led were blinking. I disconnected it from the wall outlet. So, I disassembled the printer and it was a mess, there was ink all over the interior, including the circuits board. Then I cleaned everything very carefully, and finally I assembled the pieces back together. When I tried to turn on the printer again I received the same Error message and all the leds blinking.
I've been looking for a service manual on the web or something to solve this, but I was unable to achieve my goal. I can not indulge me and buy another printer, I can not reach HP customer service, and nobody knows how to fix this problem here. Moreover I feel like I have a little kind of affection for this appliance.
Now my question: is this problem fixable? Can I fix it on my own?
Thanks a lot in advance.
CULEBRA83

All lights blinking on the printer would indicate a fatal error situation. Here are couple of things you can try:
1) Perform the steps under the section 'All lights are Blinking' in the document below:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c00476152
2) Follow the steps in the document below to 'Clean the gold-colored contacts in the print carriage' and cartridge contacts.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00094661
Note: Ensure that the printer is disconnected from power while performing the step.
Hope this helps.
Say thanks by clicking the Thumbs up icon in the post
Please mark reply as "Accept as Solution" if it solved the problem, so others can find it.
Although I am an HP employee, I am speaking for myself and not for HP

My ipad 2 doesn't turn on, My ipad 2 doesn't turn on

I used my ipad two days ago using mail and playng games only for a little time. I turn off ipad. Yesterday morning I tried to turn on my ipad but it seems dead. I try to charge after try all way to turn on it. I left it charging all the night but this morning it doesn't turn on still. Sorry for my english; hope have explained my problem.
Thanks

See if this will restart it.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

I have a iPhone 4 and lately it has been shutting down randomly when I still have battery left. It also doesn't turn back on, until I plug it in to the charger. But when I plug it in, the low battery sign shows up then comes to the lock screen with 68%.

I have a iPhone 4 and lately it has been shutting down randomly when I still have battery left. It also doesn't turn back on, until I plug it in to the charger. But when I plug it in, the low battery sign shows up then comes to the lock screen with like 68% left.

Morning Clementine Lin,
For more information this, please see this article:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Take a look at the Will not turn on, will not turn on unless connected to power, or unexpected power off section.
Have a nice day,
Mario

Macbook Pro Screen doesn't turn on?

So, I have a late 2011 Macbook Pro 15". About two weeks ago, my macbook screen just stopped working. I shut it down, and since then it's been practically "dead". The display doesn't turn on, the logo on the back is off; Essentially, the whole display of the mac doesn't get powered on. However, the startup noise is still there when I turn it on. I've been using it in a monitor as of now and it works fine with the monitor. This is the thing though, the screen is perfectly fine!! About a week ago in the morning when I turned it on, the display turned on. the screen had been white, and the apple logo popped up, it looked completely fine. Sadly I had to go to school and when I came back, no matter how many times I restarted it or did anything to it, the screen would just not turn on. Yesterday, I was showing my friend and restarted it, turned it on, then nothing. Tried it again while doing random keyboard strokes and the display turns on. Excitement in my eyes, it actually restarts and for the first time in two weeks I was to see my desktop and see my mouse moving around, all the icons, everything! The display and everything on it was working perfectly normal, no noise, no distortion, no odd colour, no issues on the display at all. My friend boots it to windows and the display stops working and again since then it hasn't worked. It's alive and perfectly normal in there, but I just don't know how to give it what it needs to bring it back that way.
Does anyone know anything to help me on this? It's quite frustrating when you see it work, then shut off. I can't use it at school to do my work anymore and it's such a nuisance.

You have a hardware problem. More than likely it is the cable that goes from the logic board to the display. It sounds like an internmitent short. Works sometimes not at other times.
The only way to fix a hardware problem is to replace the faulty piece of hardware and the only people that do that is either an Apple store or an Apple authorized repair center. That is unless you can diagnose the actual failed hardware part, find one from an Aftermarket Mac parts seller and replace the part yourself.

My phone doesn't want to turn off or on, it gives me the apple logo and doesn't turn on at all, help please??

my phone doesn't want to turn off or on, it gives me the apple logo and doesn't turn on at all, help please??

Do a reset by holding the power and home button until the apple logo appears ignoring the slide to power off (no data loss).

The iPod touch 5 battery won't charge, the iPod battery gets hot and doesn't turn on... What is wrong? Can photos and data be retrieved?

The iPod touch 5 battery won't charge, the iPod battery gets hot and doesn't turn on... What is wrong? Can photos and data be retrieved?

- See:
iPod touch: Hardware troubleshooting
- Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store. I suspect a hardware problem due to the hotness. If iTunes can't see the iPod then uor only hope if to contact a data recovery company for getting data off the iPod. If you have an iPod backup you can restore another iPod, iPhone or iPad from the backup to get the data that was in the backup
Apple Retail Store - Genius Bar

MacBook Pro suddenly doesn't turn on.

My MBP suddenly stopped working.
It was sleeping and when I decided to use it, it doesn't turn on at all.
The charger's LED indicator doesn't work either, or any of the lights in the computer.
I don't know if a SMC reset can help fix it? Help..?

gabyy1026 wrote:
I don't know if a SMC reset can help fix it? Help..?
The only way you will know if you do it! If it doesn't work, then post back.

Macbook Pro 2009 doesn't turn on without battery

Hi. I have a mbp mid 15" mid 2009 2.66. In time the battery bacame very low like 4% health, and now is completely dead or broken. When i check the battery status leds it shows full and when I try to turn on the computer (of course with AC power) it tries to turn on for 1 sec then it dies, even with AC plug. i hear the fans trying to spin for 1 sec or less, i hear the hdd sound and i see the standby led like it is trying to power on normally but It seems like it's trying to use the battery to power on. (Even when the battery was good, it would't turn on if it was 0%.. i would have to wait 10-20min or whatever to charge it to aprox20% or whatever).
I can't buy a new battery right now so I tried to turn it on without battery (I am sure the battery is completely dead and if I put a new battery it will work for sure) but why it doesn't turn on without battery?? I don't believe it needs battery to run on AC power. It's a SMC thing. What can i do to use the SMC and run the computer wihout battery? Now I'm using it with SMC bypass (keep pushing power for 10 sec and plug the ac chord) but with SMC bybass the fans run at max speed, no keyboard backlight no sensors and all that uses smc its not working. Is it safe to use it that way? (it's not running slower, i don't have performance issues).
I tried PRAM reset SMC reset, removing battery with AC on.. nothing works. It won't turn on without battery. Only with smc bybass.
It is something i can do? or buying a new battery is the only solution?
Thanks.

You have a hardware problem. More than likely it is the cable that goes from the logic board to the display. It sounds like an internmitent short. Works sometimes not at other times.
The only way to fix a hardware problem is to replace the faulty piece of hardware and the only people that do that is either an Apple store or an Apple authorized repair center. That is unless you can diagnose the actual failed hardware part, find one from an Aftermarket Mac parts seller and replace the part yourself.

My Macbook Pro Retina doesn't turn on but charger led works

I haven't used my mac for a month but it use to work perfectly fine. I tried to use it but it wouldn't turn on. When i plug the magsafe connecter the led goes orange. But when i press the power button it doesn't turn on. i tried smc reset using left shift, control and option (and power button) while charging and not charging but it doesn't work. Please help.

IF the battery was completely discharged, give it some time on the charger before trying to start up. The amber LED means it is charging, give it an hour or so before trying again.

"error executing the process" rebooted there after it doesn't turn on

Hi.
I have an important problem with my Lenovo k900 brought in september 2013. It gave an error like this "error executing the process..." I reboot the phone, but since that moment the phone doesn't turn on.
I have tried a hard reset (power + volume(+)) but it doesn´t work.
When I press the power button, the lights below switch on for a few seconds, but the phone doesn't turn on.

This is a tough problem to solve if your not experienced with fixing Mac's, you can opt to take it to a local PC/Mac tech to solve it or you can attempt things on your own.
If you opt for the local help make sure talk to them if you have backups of your data or not, thus may require data recovery efforts performed first before wiping and installing everything fresh.
Gray, Blue or White screen at boot, w/spinner/progress bar

When i plug in my ipod touch (8gb, 3rd generation) it doesn't turn on and the apple logo flashes on and off. how can i stop it and turn on my ipod??????

when i plug in my ipod touch (8gb, 3rd generation) it doesn't turn on and the apple logo flashes on and off. before this it wouldn't turn on unless it was plugged in.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

HP PSC 1410 doesn't turn on

Similar Messages

Maybe you are looking for