HP PSC 1510 AiO Scanner issue

OK, i've read through a few threads and seems that some people have similar problems as mine, but none of the solutions presented have worked for me.
I have an iMac with 10.6.4 and the scan function on my HP PSC 1510 AiO will not work. I can plug it into my fiancee's brand new macbook which has 10.6.3 installed and every function works fine. Mine does not even recognize a scanner is present. I've reinstalled the drivers on mine but still nothing. I am beginning to think there is some other underlying issue not related to but affecting the ability to recognize the scanner function.
Any clues?
Message was edited by: BlueSHO

Go to http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?lc=en&dlc=en&cc=us&lang=en&o s=219&product=428800 and ensure that you have the latest HP software installed, then delete and readd the printer using the Print & Fax prefPane, run Software Update to ensure you have the latest HP update, and all should be well.

Similar Messages

HP PSC 1510 driver issue with Windows 8.1

I can't get my HP PSC 1510 all in one to work with Window's 8.1. I've installed HP doctor and the driver fails. I've downloaded the new driver so I don't know what the issue is? Anybody solve a similar issue?

Hi @DerekRL , and welcome to the HP Forums!
I can see you're experiencing driver issues. I'd like to help!
I would suggest Uninstalling the Printer Software.
Once it is uninstalled, I would suggest putting your system into clean boot mode within the Microsoft configuration. You can do so by following this document: How to perform a clean boot in Windows.
Once the computer is in clean boot mode, I would suggest reinstalling the HP Printer Install Wizard for Windows.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Paper feed out of sync on HP PSC 1510 All-in-One Printer Scanner

Paper feed out of sync on HP PSC 1510 All-in-One(SN MY59SD224W0498). Goes to flashing orange light. With Vista Home Premium 32-bit, 6.0.6002 Service Pack 2 Build 6002. USB connection to HP Pavilion GU658AA-ABU a6250.uk .
After cleaning ink drip tray including removing & refitting the small panel in the base towards the rear RHS of the printer and also Super Glueing a small wedge of timber to close split shaft bearing for rear print feed rollers - looking from rear with clean out door removed this is at the LHS where the cogs are - paper feed is out of sync. When turned on with paper in feed tray printer draws in paper until about 2" (5cm) of paper protrudes from delivery slot & then stops. Paper jam is indicated by flashing orange light. On pressing Cancel/Resume, paper is expelled & another sheet taken in with the same results. Have turned off & restarted. Have moved cartridge cleaner tray right from front to rear & tested & then brought it right forward again & tested. Have turned off & unplugged power & USB & restarted after more than 30 minutes. Have uninstalled driver & downloaded & installed anew. Downloaded & ran the HP Print Diagnostic Utility. All to no avail. Any suggestions anyone?

Hi there nobster,
This article should cover the blinking light. However, I suspect the printer requires servicing.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

HP Deskjet 1510 AIO Not Printing

i recently brought HP Deskjet 1510 AIO and tried to install on my windows. While i never faced any issue with any HP printer, this one is making me mad.
It does scan, copy, alignment test and all but does not print through any program. I tried various solutions but no luck.
I have installed Windows 8.1 on my Mac Air through bootcamp but it should not have any concerns because of it as other printer used to work. It is also working fine in my Apple OS but not in Windows.

This worked for me.
http://h30434.www3.hp.com/t5/Printing-Issues-Troubleshooting/hp-deskjet-1510-series-won-t-print/m-p/...

HP PSC 1510 Windows 7 Driver

Hello. I can't find Windows 7 drivers for my device and the Vista ones don't seem to work corectly. Can anyone help me?

The model number HP PSC 1510.
Method 1:
You may refer to the below links and use the troubleshooters. Check if it lists and helps resolve any issues: Open the Printer troubleshooter:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&lc=en&dlc=en&tmp_geoLoc=true&product=42880...
Method 2:
You may check if you have the latest drivers installed for the device. You may refer to the below link for getting the latest drivers and check.
HP PSC 1510 Driver
Good Luck.

I have a psc 1510. how do i get it to not print a test page every time i turn it on?

I would like the PSC 1510 to NOT print up a test page automatically every time I turn the printer on. I don't do a great deal of printing, so I don't want to waste paper by having an extra page printed up evry time I want to just print up a couple of pages. Is there a way to disable this test page at startup?
I am using the PSC 1510 on a Mac, OS X 10.6.8.
This question was solved.
View Solution.

Hi there owen13,
This sounds like the alignment page needs to be scanned. This article should cover the issue you are experiencing. Give the steps outlined a shot and let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

PSC 1510 always prints test page on startup; settings menu no help

Hi,
My HP PSC 1510 All-in-one printer always prints a test page when I start it up, wasting ink and paper. I tried two things, neither of which solved the problem:
- Checking the settings, services, and every other menu I could find for any related options. Some other random help forums said there was a "print test page on startup" option somewhere, but I found nothing of that nature.
- Aligning the printer, as instructed by the test page it keeps printing out. Its first alignment failed, but the second alignment seemed to work. However, it still printed a test page the next time I started it up.
Extra information: I'm on Windows XP, and HP Software Update tells me there are no newer updates available. Also, this printer was sitting in the closet for a couple years--I only just recently hooked it up and gave it a new ink cartridge (so I can't say how it behaved before I gave it a new cartridge since it was on the shelf with no ink for a long time).
Thanks!

HP PSC 1510 All in One Feeding Problem

I own a HP PSC 1510 All in One and have had very few problems with it up until now. The computer that it is mainly plugged into runs on Windows XP. Once the printer is turned on it immediately takes in a sheet of paper however only half way then a message appears on the computer screen saying that there is a paper jam. If you press the "Cancel/Resume" button on the printer the paper feeds all of the way through however it immediately takes in another sheet but again only half way. Because of this you cant print at all.
Hope you can help!!!

Hi - Try following the steps in this document. It should help resolve the problem.
Hope that helps.
Say Thanks by clicking the Kudos thumbs up. Please mark the post that solves your problem as an Accepted Solution so other forum users can utilize the solution.
I am an HP employee.

Can Windows 7 cause a permanent error light on a PSC 1510?

Have a PSC 1510 that has been lightly used with HP computer and Windows XP for a couple of years. Have new laptop with Windows Home Premium 7. Downloaded driver for the 1510, connected, started a print job and after one page, the check paper light started to blink. Have been through all the diagnostics twice with no success. Perhaps it was timing coincidence but the printer will do nothing. The inside is so clean it is not even dusty, I think it has ever had a jam. I currently have 3 other HP printers and several computers so I pretty familiar with drivers, cleaning, etc.

Hi,
According to your description, it seems like system considerable file corrupt. It would be better to use Windows installation disc to make system repair to fix this problem.
If you didn't have Windows installation disc in your hand, you can refer to the link below to create a system repair disc.
Create a system repair disc:
http://windows.microsoft.com/en-us/windows7/create-a-system-repair-disc
Roger Lu
TechNet Community Support

PSC 1510 All in one printer - won't print even black and white when colour cartridge not recognised

My PSC 1510 All in one printer is flashing the "check printer cartrige icon" and both "Black" and "Colour" icons at the bottom left of the printer.
It won't print at all, even when I select grayscale (black and white). The help pages tell me that if I remove the colour cartridge the printer will switch to backup mode and I'll still be able to print in black and white (though not copy or scan). But this is not the case, and I can find no way of switching manually to backup mode. The help pages have no useful explanation of backup mode. I've also tried cleaning the cartridge (which I'm pretty sure isn't empty) but that makes no difference.
Can anyone help? I'd be very grateful.

gabri21 wrote: I have a very similar problem with my PSC1510 but only the colour cartridge light is blinking. I am also unable to find any useful information to set up printing in back up mode. Can anyone assist in resolving this problem for us?
With only one cartridge light blinking I would suspect the cartridge, they do rarely fail (much more often for reman cartridges, see here). Clean the cartridge contascts as shown here. If that fails and the cartridge is an original HP then check the warranty date as shown here. If the cartridge is in warranty return it to your dealer for a warranty replacement.
The printer will automatically switch to backup mode if the black (or color in some printers) cartridge is removed. I do not know if this works with the PSC 1510, some all-in-on devices insist on having both cartridges present.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Windows RT and HP PSC 1510 All-in-One printer connection

Hi, I have a Windows 8.1 RT tablet (Microsoft Surface 2) and a wired HP PSC 1510 All-in-One printer. Now when I plug in the printer via the USB, there is no driver that can be found to make this printer work with my device. Anyone have this problem or any solutions? I've tried looking at HP support and nothing there has been helpful.
Let me add that on the Microsoft Surface, you cannot run .EXE files which are the file types of the HP drivers.
Thanks ahead
This question was solved.
View Solution.

Hi,
I afraid the printer is not supported on Windows RT, as you may find listed within the following support document:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03168175&tmp_task=prodinfoCategory&cc=us&dlc=en...
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

When printing on photopaper with HP PSC 1510, the top part of the print does not print.

When I try to print on photopaper with PSC 1510, it does not print the top part of the print - the paper seems to get feeded well. It looks like it somehow moves the printing area 10 cm higher on the document, so the pictures are cut in the middle and the top part is not printed. This varies - printing using the Windows image preview didn't cut off as much as Open Office's Writer.

As long as your cartriges are full, put a photo on you desktop, highlight it , click COMMAND P and the print preferences window should drop down, and select your printer and photo paper.

Need help getting Mac driver for HP PSC 1510 that works on XP networked printer

My goal is to use a Mac OS X 10.5 laptop and use a Windows XP networked printer - an HP PSC 1510. So far I have failed.
I downloaded a driver update 1.1.1 from Mac which has version 4.03 of the HP PSC 1500 series family of drivers. However, the documentation states that it is not one that will work with an IP or XP connected printer. The earlier driver that came with Mac OS X 10.5 documentation also says that it will not work with an IP or XP connected printer. This explained why the Mac versions of the HP software applications could not see my printer. I had also tried using the default Postscript generic option presented when I was setting up the network printer on the Mac. My one graphic page printed as ten or twelve text pages of nonsense characters so that was also a failure.
So I have my shared HP PSC 1510 wired (connected) off my Windows XP desktop and shared on my home network. I really want to be able to print to the HP PSC 1510 from my wireless Mac laptop especially now that I am partially disabled and getting up and to the PC printer is painful.
If anyone knows how to make this work properly, or even an acceptable workaround, I would be ever so grateful.

Hey , Welcome to the HP Support Forums!
I understand that you're looking for a driver that would allow your HP PSC 750 All-in-One Printer to function for printing and scanning on your Mac OS X 10.10 Computer. I would like to assist you with this today. I am happy to report that the HP printing and scanning driver is offered for your specific model of PSC printer for the newer Mac Operating Systems. Please click here to download the basic print and scan driver. According the the driver page (found here) this driver offers basic scan and print capabilities for Mac OS X 9.1 to Mac OS X 9.2.2, and Mac OS X 10.1.x to Mac OS X 10.2.4 and higher. Once the driver is downloaded please follow the onscreen prompts to complete the installation. Once the installation has completed successfully please test printing and scanning to confirm that your product is functioning as per normal. Please respond to this post with the result of your installation. I look forward to hearing from you. Best of luck!

[svn:fx-trunk] 9343: Tweak for minor scanner issue introduced with the DesignLayer change.

Revision: 9343
Author:   [email protected]
Date:     2009-08-17 07:15:39 -0700 (Mon, 17 Aug 2009)
Log Message:
Tweak for minor scanner issue introduced with the DesignLayer change.
QE notes: N/A
Doc notes: N/A
Bugs: SDK-22714
Reviewer: Gaurav
Tests run: Compiler cyclone.
Is noteworthy for integration: No.
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-22714
Modified Paths:
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/dom/MxmlScanner.java

PSC 2410 Photosmart - Scanner Drivers not installing

PSC 2410 Photosmart All-In-One Scanner Printer
installing on Windows XP
After the HP driver sofware is run (gc_w01_ENU_NB.exe), The scanner shows this message when I attempt to use it, "Scan Options are not set. Install or run the device software on computer."
The printer works fine so it appears that part of the installation was complete. Can someone please help me get my computer to install the full driver package?

Run the HP solution center on the computer, and scan from the computer. If you want use the scan button on the printer to scan, set up "scan to" destinations on hp solution center. This error message basically says you have not set up the scan button options yet.
======================================================================================
* I am an HP employee. *
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **
***Click on White “Kudos” STAR to say thanks!***

HP PSC 1510 AiO Scanner issue

Similar Messages

Maybe you are looking for