HP PSC 1600 All-in-one installing problem

I just purchased the above all in one from the apple store. I followed all the instructions but when I try to install the printer software by clicking the icon I keep getting the standard:
'There are no devices connected or he device which you have connected is not supported by this installer. Please connect the proper device and run the installer'
The accompanying trouble shooting booklet, mentions this problem and says to make sure the USB cable is plugged in the computer before instaling the software. I have done this but to no avail.
Any idea what I could be doing wrong?

Yes I just installed it and before that the other download on the HP website. They still wont work. The apple store suggest I bring it the all in one printer to the store and my Imac, however I have to book an appointment for them to sort it out, maybe a week. I want to have actioned asap cos I have a lot of work to do on it!

Similar Messages

HP PSC 1510 All in One Feeding Problem

I own a HP PSC 1510 All in One and have had very few problems with it up until now. The computer that it is mainly plugged into runs on Windows XP. Once the printer is turned on it immediately takes in a sheet of paper however only half way then a message appears on the computer screen saying that there is a paper jam. If you press the "Cancel/Resume" button on the printer the paper feeds all of the way through however it immediately takes in another sheet but again only half way. Because of this you cant print at all.
Hope you can help!!!

Hi - Try following the steps in this document. It should help resolve the problem.
Hope that helps.
Say Thanks by clicking the Kudos thumbs up. Please mark the post that solves your problem as an Accepted Solution so other forum users can utilize the solution.
I am an HP employee.

Can't scan from brand-new HP PSC 1600 all-in-one printer/scanner/copier

Just installed this new all-in-one, and the printer and copier work perfectly. But when I try to scan, it won't do anything. Error message says to configure a "scan destination." But the menu to do so, on the desktop, won't open at all. Just stalls and stalls. Everything else seems to work fine, so no connection problems. Anybody know how to shake this menu loose?
iMac G3, iBook G3 Mac OS X (10.3.9)

I've been using the HP psc 1210v for about a year now, and I've always been able to print, but scanning (which I do very infrequently) has always been a problem. Typically, to use the scanner, I have to remove the printer and re-install with the latest drivers from HP's (currently 7.7.2).
So, after doing this again, I was able to scan a couple of images by using the "HP Device Manager". I just double-click on "Scan Picture", which opens the "HP Scan" application, and I can choose from there how to scan; either opening in another Application or Save to File.
I'm using 10.4.6, but I know I originally scanned some images using this printer in 10.3.9. Hopefully this will continue to work!
Mac mini G4 Mac OS X (10.4.6)

Hp-psc 1317 all-in-one printing problems

I have a hp psc 1317 printer scanner. It is connected to my laptop running Windows Vista. Recently the print quality diminished until now when I print a document it sounds like printing is happening but there is no mark on the paper whatsoever.
Today I downloaded and installed the HP Solution Centre software. My ink levels are pretty full and when I attempt a test document the software doesn't seem to think there is a problem although still nothing is printing on the paper.
I am completely confsued as to what is causing this problem. The only thing I can think might be connected to the problem is that in the printer window of the control panel two printers are showing: hp psc 1310 and hp psc 1310 (copy 1). I'm not sure why the printer has been listed twice but I have chosen each printer in turn and attempted to print a document. When the 'original' printer is selected nothing is printed at all but if I select the 'copy' printer it goes through the process described above.
There is obviously not a problem with ink levels and the printer and computer are communicating but something somewhere is going wrong and I'd love someone's help if at all possible.
Thanks so much
Chris

This article should help resolve your blank pages:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01892627&cc=us&dlc=en&lc=en
Give the steps listed under your operating system a try and let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

HP PSC 1410 All-In-One printer problem!

I have a PSC 1410 for a while now and I reinstalled Windows 7 recently and now the printer's not detected but I can scan documents. What could be the problem? It was working fine before I reinstalled Windows 7 and I've obviously installed the drivers.

Click here for troubleshooting tips for blinking lights on the PSC 1400 series printers.
Regards,
Bob Headrick, Microsoft MVP Printing/Imaging
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

HP PSC 1600 all-in-one getting scanner to work

Has any one had any luck in getting the scannner portion of this hardware to work. I had no problems setting up the printer but I can't get the scanner to work. When I try xsane it flashes scanning for devices and closes.

I never used it, but there is a separate driver for HP devices.
http://hpoj.sourceforge.net/suplist.shtml
http://www.linuxprinting.org/show_print … P-PSC_1600
It's not in the support list, but I suppose it'll work.

HP PSC 1600 All-In-One error message remove and replace color cartridge

I get the remove and replace color cartridge and printer or scanner won't work. I have replaced the cartridge with new ones twice and it still happens. Just installed a new HP color cartridge and no luck. I've tried everything I can think of.
Please, does anyone have any other suggestions????
Thank you,
Mary Jean Kelso

Hi MJKEL,
Welcome to the HP Forums.
I see that you are having an issue with errors on the printer pertaining the ink cartridges.
I do have a few steps that we can try in the attempt to troubleshoot this issue.
First off, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
I have also located a documet that deals with A 'Remove and Check [color / black / photo] Cartridge' Error Message Displays on the Printer Control...
Please feel free to write me back if you have any other questions or concerns.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

HP PSC 1315 All in one printing problem

My printer only prints text in red in the body. It will print black along the top and bottom of the paper. It also prints in black when I copy something. I put in new fresh cartridges. What can I do?

What program are you printing from? It would appear your are printing in graphics mode (rather then black text) and that your printer is running out of cyan ink.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Hp psc 1600 all in one running on XP prints a one inch wide black line down the center of the paper

Occurs only when using copy mode!

Please follow the troubleshooting steps here:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02507634&tmp_task=solveCategory&cc=au&dlc=en&la...
Although I am working on behalf of HP, I am speaking for myself and not for HP.
Love Kudos! If you feel my post has helped you please click the White Kudos! Star just below my name : )
If you feel my answer has fixed your problem please click 'Mark As Solution' and make it easier for others to find help quickly : )
Happy Troubleshooting : )

Psc 1310 all-in-one printer problem

Every so often my psc1310 printer goes into "Deleting..." when it is instructed to erase a message. Disconnecting, closing and reopening the computer, etc., does no good. It usually requires uninstalling and reinstalling the printer program to get rid of the problem.
Is there a more convenient way of solving it?

Hi,
Check the link below:
Scanning with HP Director Software in Windows XP
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

Psc 1350 all in one installing hp solution center

I am trying to find and install the full installation for this printer. I wish to use the hp Solution Center.

rreliv,
What OS are you trying to install your printer on?
I was an HP employee
If I have helped you solve your issue please mark it as solved
**Say Thanks By Clicking on the Kudos Star**

Installing HP PSC 1350 all-in-one printer/scanner

In the past, I could usually solve the "Offline" or "Not Connected" problems by unplugging my printer for a few minutes, but that no longer works. So, I decided to buy another one. However, just before clicking on the BUY button on Amazon, I decided to try to fix the problem one more time. Part of the "fix" was deleting my printer from the computer and then reinstalling it. This is where I'm now stuck. I deleted it, but I can't reinstall it. I get to the ADD window, but everything is grayed out. So, how do I install my printer? I might add that the HP instructions that I was following (OSX v. 10.9 Mavericks- Installing and using the printer on a Mac) are what got me this far.

Have you installed the v10.9 Mavericks compatible driver yet >> Software & driver downloads HP PSC 1350 All-in-One Printer | HP® Support
After you download the driver, open System Preferences > Printer & Scanners > Print
Delete the current printer by selecting it then click - (minus)
Then click + to add the printer back in.
That should load the driver for you.

Not able to install scanner part of 'HP PSC 1410 all-in-one'[SOLVED]

Despite trying instructions in the wiki, checking earlier reports of this problem on the forum and trying on reports from google, I am not able to install the scanner part of 'HP PSC 1410 all-in-one'. The command 'sane-find-scanner' finds it but 'scanimage -L' does not. Also xsane and simple-scan program do not find it. Any help will be appreciated.
(I also tried these entries in the udev sane rules:
ATTRS{idVendor}=="03f0", ATTRS{idProduct}=="4d11", MODE="0664", GROUP="scanner", ENV{libsane_matched}="yes"
"SUBSYSTEM=="usb_device", ATTRS{idVendor}=="03f0", ATTRS{idProduct}=="4d11", PROGRAM="/bin/sh -c 'K=%k; K=$${K#usbdev}; printf bus/usb/%%03i/%%03i $${K%%%%.*} $${K#*.}'", NAME="%c", MODE="0666", GROUP="scanner", ENV{libsane_matched}="yes"
but they do not work).
Some previous threads:
https://bbs.archlinux.org/viewtopic.php?id=107474
https://bbs.archlinux.org/viewtopic.php?id=65431
Not able to install sane-dev from AUR; 'makepkg -s' gives error:
==> WARNING: Cannot find the git binary required to determine latest git revision.
Last edited by rnarch (2012-03-28 05:05:09)

Git was not installed. So I installed it and ran 'makepkg -s' again. It ended with following error:
installing saned.conf in /etc/sane.d/saned.conf...
installing dll.conf in /etc/sane.d/dll.conf...
for dir in artec_eplus48u gt68xx snapscan epjitsu ; do \
/bin/sh ../mkinstalldirs /home/sane-dev/pkg/usr/share/sane/${dir} ; \
done
mkdir -p -- /home/sane-dev/pkg/usr/share/sane/artec_eplus48u
mkdir -p -- /home/sane-dev/pkg/usr/share/sane/gt68xx
mkdir -p -- /home/sane-dev/pkg/usr/share/sane/snapscan
mkdir -p -- /home/sane-dev/pkg/usr/share/sane/epjitsu
/bin/sh ../mkinstalldirs -m 775 -g uucp /home/sane-dev/pkg/var/lock/sane
Usage: mkinstalldirs [-h] [--help] [--version] [-m MODE] DIR ...
Create each directory DIR (with mode MODE, if specified), including all
leading file name components.
Report bugs to <[email protected]>.
make[4]: *** [install-lockpath] Error 1
make[4]: Leaving directory `/home/sane-dev/src/sane-backends/backend'
make[3]: *** [install-data-am] Error 2
make[3]: Leaving directory `/home/sane-dev/src/sane-backends/backend'
make[2]: *** [install-am] Error 2
make[2]: Leaving directory `/home/sane-dev/src/sane-backends/backend'
make[1]: *** [install] Error 2
make[1]: Leaving directory `/home/sane-dev/src/sane-backends/backend'
make: *** [install-recursive] Error 1
==> ERROR: A failure occurred in build().
Aborting...
Please note the line: Report bugs to <[email protected]>. Is it a bug? Sane-dev was successfully installed by others, eg: https://bbs.archlinux.org/viewtopic.php?id=65431
Last edited by rnarch (2012-03-26 01:11:57)

HP PSC 1410 All in one Printer not installed

In windows 8 after complete and lastest installation of Driver of HP PSC 1410v All in one, in the Control Pannel, Device and Printer Tab only scanner icon is showing no any printer icon and no other HP Icon, so i can use scanner only of this model but not printer. After reading suggestions I install the windows 7 driver in windows 8 after solution of fatel error here is also only scanner is showing no facility for printing, please help me where I am wrong or whats solution fast plzzzzzz.

Hello Jai_pareek,
Welcome to the HP Support Forums! I see you would like to install your HP PSC 1410 to your computer running the Windows 8 Operating system. You tried downloading the Windows 7 driver but are now getting a fatal error. Please go ahead and start with the steps listed below:
1. Unplug the USB if using a direct connection.
2. Remove the HP PSC 1410 software from your computers Control Panel's Uninstall a program option.
3. Restart the computer.
4. Make sure ALL the PSC 1410 software is gone from the programs list as well as your HP folder listed under the All programs in your Start Menu.
5. Now go ahead and download the software and drivers for your PSC 1410 (DO NOT plug in USB until the software prompts you to):
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=al-110055-2&cc=us&dlc=en&lc=en...
6. Go ahead and print a test page.
7. If you are unable to print a test page, please run the HP Print and Scan Doctor- It was designed by HP to provide users with the troubleshooting and problem solving features needed to resolve many common problems experienced with HP print and scan products connected to Windows-based computers.
Please let me know if this was successful! I will watch for your reply.
Thank you,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

HP PSC 1317 All-In-One Problems

I am using a HP PSC 1317 All-In-One printer located on my Windows network, Mshome, connected to my Desktop Computer (PC). Using two Windows-powered laptops with the HP PSC printer being 'Shared' I am successfully able to print out documents over the network, wirelessly.
Today I have spent most of my time trying to get this same result using my PowerBook G4.
I connect to my Network, Mshome, open up a document and select print. My current printer is not listed so I click to add one. I then go through the steps required to add a printer to my PowerBook over the network. This all goes well until is lists it as 'Generic' to which I open up and select HP. I scroll up and down the list umpteen times to find my printer model is not listed so for most of my day I have been trying out official HP drivers for OS X for my model of printer including 3rd party drivers that all don't seem to work.
I bit the bullent and decided to install the printer directly via USB on to my PowerBook. Despite installing unwanted applications on my PowerBook that works and I can print out successfully. Using this same method, I try to add the printer over the network, with it still plugged in to my PowerBook, thinking that I would be able to locate the drivers, but still no luck (or no idea where these drivers will be located). I give up and plug the printer back in to my Desktop PC and then try to add it using the same process before but unable to locate the required drivers and the product model under HP.
I am totally clueless as to what I can do to have my PowerBook print out my work wirelessly using my HP PSC 1317 All-In-One printer using my Windows Network, Mshome.
Usually I am quite quick to fixing these sort of computer/hardware-related problems but this one simply has me stumped. Any help and adive on this would greatly help and end a wasted day.
Regards,
Steve

There was no PSC 1310 model choice in the menu. Deskjet 900 series doesn't work and, yes, at one point I did install Ghostscript. My printer does, however, work on the Windows network using multiple computers and laptops running Windows. Nevertheless, connecting to the network and using the printer using my PowerBook doesn't.
Nevermind. My alternative is that I can send my printable documents to a Windows computer on the network to print out. Nothing I cannot bypass anyway.
Thanks for the help.

HP PSC 1600 All-in-one installing problem

Similar Messages

Maybe you are looking for