HP PSC 1610 All-In-One doesn't see that paper is loaded

HP PSC 1610 All-In-One doesn't see that paper is loaded and keeps asking me to load paper and press OK. I have done that per manual with no success. What's going on?
I am using an Intel MacBook running SnowLeopard

OK, I think this was among a series of "recalled" (years ago) printers where the feed rollers would become coated with a very slick substance that was outgassing from the rubber. There was a cleaning kit made for this but I am not sure it is still available. Instructions for it are here.
It the absence of the kit, you can clean the rollers manually by removing the rear door and scrubbing the three rollers with Scotchbrite. Red was used in the kit, but green may be aggressive enough to do the job. You may have to fiddle with the printer to clean the entire circumference of the three rollers. Once you do this, you will be good to go for years to come!
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Similar Messages

Paper Jam for HP PSC 1610 All-in-One Printer

Paper Jam for HP PSC 1610 All-in-One Printer:
I had a paper jam and cleared the paper from the printer. Now every time I turn the printer "on" it picks up the top piece of paper from the tray and runs it about ½ to ¾ of the way thru the paper feed, stops, and then displays message "paper jam clear paper and then press OK". When I do that it simply picks up the next piece of paper off the tray and does the message again. If I push the OK button on the printer it will simply finish the ejection and then pick up the next paper from the tray, and do the same thing. I have examined the interior (and exterior) of the printer for paper scraps and any other obvious sign of trouble (dirty drive wheels, missing rollers, broken springs, etc...) and can not see anything unusual. I can not print a test print because of the paper jam message. I am running Windows XP and the printer has been working fine for months (until this recent jam). I did all the steps from the HP fix it site including clean rollers, plug and unplugged, carriage travel OK and more. Don't know what to do now........Any help would be great!!!! Thank you!

Hi my printer psc 1610 hp not picking paper

Can I share HP PSC 1610 All-In-One series printer through Bonjour?

I have an iBook G4, and a Mac Mini (10.4.11- Tiger) with a HP PSC 1610 All In One series printer connected to it by USB. On my iBook G4, the printer comes up under Shared Printers in the Printer Setup Utility but when I click on it, and press Show Info it freezes.. so I was wondering, is there a way to connect to the printer wirelessly with the correct driver (because the driver doesn't show up in the driver list... and the driver is installed.)

Hi my printer psc 1610 hp not picking paper

Psc 1610 all-in-one

Can I e-print to my HP PSC 1610 all-in-one?
This question was solved.
View Solution.

Hi JudithAMorrison,
Just to add some extra clarification for you, your PSC 1610 is not able to ePrint, as it was released before HP applied the ePrint technology to their printers. Generally any of the new printers are ePrint capable, so if you are wanting to acquire an HP ePrint enabled printer you can contact HP Tech Support at 1-800-474-6836 and see what sort of deals they have to get you an ePrint enabled printer.
If you need anything further please let me know. Have a great day!
Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
**MissTeriLynn**
I work on behalf of HP

Psc 1315 all-in-one printer will not feed paper. There is no paper jam.

psc 1315 all-in-one printer has stopped feeding paper. There is no paper jam.

hi there sorry to learn that you are having this issue.
Are you still facing this issue? If you are I will do my best to help you.
Have you upgraded the firmware of your printer lately; you can get the latest firmware in the main support page for your printer
This is the main support page for your printer, GO HERE Go to software and drivers download and select your operating system. You should also upgrade the firmware of the printer.
If you are not experiencing this issue any longer, May you let me know, your time and courtesy,
will be deeply appreciated.
Regards;
RobertoR
remember ==▼
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

HP psc 1610 All-in-one ERROR

Dear reader,
My HP psc 1610 won't work anymore, if it even bothers to turn on I get the following message: ERROR:0xc0620004 411:lib_micci2.c
Does anybody know what could possibly wrong withe the machine? It used to work well, i didn't trow on the ground or something, (yet)
Thank you in advance,
Kind regards.

Hi - Follow the steps to reset the product, located in this document. Hopefully that will resolve the issue. If not, the printer will likely need to be serviced or replaced.
Hope that helps.
Say Thanks by clicking the Kudos thumbs up. Please mark the post that solves your problem as an Accepted Solution so other forum users can utilize the solution.
I am an HP employee.

PSC 1610 All-in-One error:0x880f253c

I'm getting an error message and cannot print. The printer starts to print then stops, tells me that the print job failed then tries to start again and stops. I get an error message on the printer display panel error:0x880f253c. After I've cancelled the print job and shut off the printer the error message appears a couple of times and I have to shut it off again. I've tried unplugging it for a minute and plugging it back in but still get the same error message. How can I fix this? Thanks.

It looks like you've done what is recommended to resolve that error. See the document listed below:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00489814&tmp_task=solveCategory&lc=en&dlc=en&cc...
The only other thing it mentions is to removed the cartridges first, then disconnect the power cord.
If that doesn't take care of it, it looks like it will need to be serviced. Wish I had better news.
Say Thanks by clicking the Kudos thumbs up. Please mark the post that solves your problem as an Accepted Solution so other forum users can utilize the solution.
I am an HP employee.

1610 all in one printer

My computer is a Gateway GT4024 connected to my 1610 printer via a USB port. My wifes computer is an HP750N and is NOT commected to the printer with a cable.. Both operate on an XP platform. We have a LINKSYS wireless router and both computers have a wireless card. Until last week, both of us could send files to the printer and would print successfully. Now my wife can still print from her computer but I cannot. When I right click on the printer icon and open all printers and faxes, I see where the file I want to print is in the queue but somehow it's not going to the printer to be printed. I tired to print from my computer from WORDPAD but no success. I've reinstalled the software, disconnected the printer for 5 seconds, restarted my computer...still no printing from my computer but we can still print from my wifes computer...any suggestions of what I might try???

Hi @ContraMoros ,
Thank you for visiting the HP Support Forums and Welcome. I have read about your HP PSC 1610 All-in-One Printer and not having Software installed for your Mac 10.8 system. Your Mac would automatically install any software or drivers needed to operate the printer.
If the printer is not starting up there could be an issue with the wall outlet or the adapter. Here is a document on troubleshooting the printer not coming on.
Hope this helps.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

HP psc 1210 all-in-one printer and Mac OS 10.9 (Mavericks)

I just installed the new OS X (Mavericks) on my mac yesterday, and now my printer, an old but reliable HP psc 1210 all-in-one, will not install. I was previously running OS 10.6 (Snow Leopord) and had no problems with the printer. Is there anything I can do to install my printer on the new OS? My computer doesn't even recognize that there is a printer connected via USB when I try to install it... is there anything I can do?

Hello,
Here is a link to a support document on hp.com on how to install on OS X Mavericks.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03967522&tmp_track_link=ot_faqs/top_issues/en_u...
Let me know if this was usefull by clicking on the Kudos button.
I work for HP.
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
Click the KUDOS STAR on the left to say “Thanks” for helping!

HP PSC 1317 All-In-One Problems

I am using a HP PSC 1317 All-In-One printer located on my Windows network, Mshome, connected to my Desktop Computer (PC). Using two Windows-powered laptops with the HP PSC printer being 'Shared' I am successfully able to print out documents over the network, wirelessly.
Today I have spent most of my time trying to get this same result using my PowerBook G4.
I connect to my Network, Mshome, open up a document and select print. My current printer is not listed so I click to add one. I then go through the steps required to add a printer to my PowerBook over the network. This all goes well until is lists it as 'Generic' to which I open up and select HP. I scroll up and down the list umpteen times to find my printer model is not listed so for most of my day I have been trying out official HP drivers for OS X for my model of printer including 3rd party drivers that all don't seem to work.
I bit the bullent and decided to install the printer directly via USB on to my PowerBook. Despite installing unwanted applications on my PowerBook that works and I can print out successfully. Using this same method, I try to add the printer over the network, with it still plugged in to my PowerBook, thinking that I would be able to locate the drivers, but still no luck (or no idea where these drivers will be located). I give up and plug the printer back in to my Desktop PC and then try to add it using the same process before but unable to locate the required drivers and the product model under HP.
I am totally clueless as to what I can do to have my PowerBook print out my work wirelessly using my HP PSC 1317 All-In-One printer using my Windows Network, Mshome.
Usually I am quite quick to fixing these sort of computer/hardware-related problems but this one simply has me stumped. Any help and adive on this would greatly help and end a wasted day.
Regards,
Steve

There was no PSC 1310 model choice in the menu. Deskjet 900 series doesn't work and, yes, at one point I did install Ghostscript. My printer does, however, work on the Windows network using multiple computers and laptops running Windows. Nevertheless, connecting to the network and using the printer using my PowerBook doesn't.
Nevermind. My alternative is that I can send my printable documents to a Windows computer on the network to print out. Nothing I cannot bypass anyway.
Thanks for the help.

Hp psc 1350 all-in-one /wi fi enabling

I have an hp psc 1350 all-in- one printer. My desktop is a dinosaur and won't handle broadband internet. I now use an Apple iPad tablet on wi fi and don't want to purchase another printer. Is there a way to make my printer work on wi fi with my tablet through my router without a desktop computer. I tried hooking it up per instructions off of eHow but it my tablet can 't find it. Do I need a Driver or something else to make it work or is it even possible. Thanks for any help anyone can give me . Learnin.
This question was solved.
View Solution.

Hi,
You will need an AirPrint enabled printer to print directly from an iPad or a networked printer to print from the HP ePrint mobile app.
I afraid the PSC 1350 is a USB only printer, it doesn't support printing from a mobile device as iPad.
You may find a list of supported printers for iOS devices in the following document:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03722645&tmp_task=prodinfoCategory&cc=us&dlc=en...
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Hp psc 1350 all-in-one driver download issues

Hello
I have a Toshiba laptop and an hp psc 1350 all-in-one printer. Both were working well until Sunday. Now the printer will not work.
The on light of the printer is constantly on when attached to power, I can press the on button so it doesn't appear to be broken, but the light will not turn off.
When I remove the power cord the lights cycle through the printer panel (and the on button light does go off momentarily) then the on light stays on and will not turn off.
I have been unable to download the latest driver update from Windows Update or any websites automatically or manually - TOSHIBA USB DVB-T/Analog Hybrid Tuner (391 KB). The download always fails. I also tried the FixIt facility from Microsoft, but it tells me there are no issues.
Does this mean the driver is the issue, or do I have to purchase a new printer?
Thanks for your help.
This question was solved.
View Solution.

Hi Gerri_31,
I understand you aren't able to shut down the printer with the power button.
Thank you for your reply.
I will be happy to help you with this.
I would do a power reset to see if that will resolve the issue. With the printer still turned on, disconnect the power cable from the back of the printer, hold the power button for 10 seconds to drain any power, if the printer has external power module with a detachable power cord disconnect it for 15 seconds and then reconnect it. Then disconnect the power cable from the wall outlet. Wait 10 seconds and reconnect the power cable back to the wall outlet first, then the back of the printer and power it on again.
Make sure the printer is connected directly to wall outlet. (don't use a power hub or a surge protector)
I have provided a document for power issues.
The HP Printer Won't Turn On or Respond.
If these steps don't resolve the issue I would recommend to call HP Tech Support for
further assistance to see what other options are available for you or to find out about
the trade in and trade up program.
Contact HP Worldwide.
Hope this helps.
Thank you for posting on the HP Forums. Have a great day!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Does the hp psc 1210v all-in-one have the ability to print back to front?

My hp psc 1210v all-in-one is still working and it is driving me crazy that this printer doesn't have the ability to print back to front. I am also upset that there is no software to print double sided like with the newer hp printers.
Is it just me or would this printer be perfect if it had these features?
This question was solved.
View Solution.

Printing back to front is actually a feature of the software you are using. You can do this in Word on your printer now. This link will go into more detail: "Printing Back to Front."
Lastly, two-sided printing is an accessory part that you put on the back of the printer to make it turn (called a duplexer). Once again, not a feature that can be added to a driver, or this printer for that matter. Sorry to be the bearer of bad news but on the plus side, at the HP Parts Store, there are enough parts for this printer, you could keep it running for decades.
I am glad you like it.
Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
When a solution is found please mark the post that solves your issue.
Every problem has a solution!

Psc 2110 all-in-one, Windows Vista 32-bit,

psc 2110 all-in-one, Windows Vista 32-bit, Tried to scan and now printer will not scan or print. I have uninstalled and reinstalled and it still doesn't work. HP diagnostic said I needed a new driver and HP by passes that request.
Scanner hasn't worked very well since I put the printer on Vista. How do I get a download for a new driver from HP?

Hello 2_old ,
Please let me take a moment to say "Welcome Back" to the HP Forums.
I see that you are receiving an error message about the left ink cartridge on the printer.
It is possible that the ink cartridge is low or even empty.
First off, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
If the error is still on the printer after the unit has been connected to a wall outlet, I suggest you try another cartridge.
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
I hope you have a great day and thank you for your time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

User Defined Paper Size, Windows 7, PSC 2110 all in one printer

I am trying to print a 5x7 photo using the user defined paper size of my PSC 2110 All-in-One printer. When I used X
P os, it was easy to do. Since upgrading to Windows 7, I have been using the default drivers that load with that, but it doesn't have the ability to define paper size. Is there a driver available that would let me do this? I've tried to use compatability mode to get the original drivers from the installation disc to work, but it won't do it.

Hi,
The last update was for Vista, 5 years ago:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=4220...
At this stage, Windows 7 only supplies a very basic and generic print driver for this printer just for print. You may want to keep that way or buy a new printer.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

HP PSC 1610 All-In-One doesn't see that paper is loaded

Similar Messages

Maybe you are looking for