HP PSC 1610 install photosmart on win 7 system

installed driver for PSC 1610v on my window 7 system, but can't scan and rquire install TrayApp.msi or photosmart.

Hi swan1214,
Thank you for the reply.
What didn't work when you were reinstalling using the HP Printer Install Wizard? What errors did you receive? I just need to know what happened before I can suggest something else.
Let me know!
Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
**MissTeriLynn**
I work on behalf of HP

Similar Messages

  • Why can not I install iTunes on Win 7 installation appears every time the next sunrise; service, apple mobile device, failed to start verify that you have sufficient privileges to start system services  Please help me

    Why can not I install iTunes on Win 7 installation appears every time the next sunrise;
    service, apple mobile device,
    failed to start verify that you have sufficient privileges
    to start system services
    Please help me

    The most complete instructions for resolving the issues with the new iTunes is in the user tip: https://discussions.apple.com/docs/DOC-6562

  • HT201413 I am receiving the error code (-50). The original itune songs etc were installed on a win 7 32 bit system and I have now moved to a win 7 64 bit system. Is this why I get the error code? I can access the itunes store to view my account. Any ideas

    I am receiving the error code (-50) when trying to access the itunes store. The original itune songs etc were installed on a win 7 32 bit system and I have now moved to a win 7 64 bit system (same PC) and have copied the folder across. Has the switch from 32 to 64 bit caused the problem? Is this why I get the error code? I can, however, access the itunes store to view my account. Any ideas please?

    Hello,
    The TechNet Sandbox forum is designed for users to try out the new forums functionality. Please be respectful of others, and do not expect replies to questions asked here.
    As it's off-topic here, I am moving the question to the
    Where is the forum for... forum.
    Karl
    When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
    My Blog: Unlock PowerShell
    My Book: Windows PowerShell 2.0 Bible
    My E-mail: -join ('6F6C646B61726C40686F746D61696C2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

  • How to install HP printer PSC 1610 AIO Windows 7 without CD

    Misplaced CD for HP printer PSC 1610 All-in-one and need to install. Saw a note I had stating "PS_AIO_NonNetwor. Please give me a step by step install directions. I am 80 years old and an amateur. Thank you

    Hi, do you have a 1610v or 1610xi model?
    Please mark the post that solves your issue as "Accept as Solution".
    If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
    I am not a HP employee.

  • I installed 10.5.8 to my IMac 5 and now it won't recognize a driver for my printer which is an HP PSC 1610.  I downloaded the software from HP again and it still says it is searching for drivers

    I installed 10.5.8 to my IMac 5 and now it won't recognize any drivers for the printer which is an HP PSC 1610.  I downloaded the software and driver from HP and it still says it is searching for drivers to install the printer.

    May be worth looking here:
    Printer & scanner drivers for OS 10.5 and 10.6:
    http://support.apple.com/kb/HT3669?viewlocale=en_US

  • Reader doesn't install on my Win 7 64 bit system. HD and install are both fresh but get an error that there is previous information?? concerning an install.

    Like it says: Reader doesn't install on my Win 7 64 bit system. HD and install are both fresh but get an error that there is previous information?? concerning an install.

    Please give the full, and exact, message. Thanks.

  • Win XP Won't install, won't copy system files

    I'm putting together an A64 system w/ a WD 36gb raptor on sata1.
    I've done all of the things posted on this board (changed bios settings, used the floppies to install the sata drivers during windows setup).  Everything is fine up until the xp setup is copying the setup files from the cd.  It stops at every other file and says that it can't copy that file.  Sometimes I can press enter and it will copy it on the second try but it always stops partway through and won't copy any more files.  I've tried 2 different windows xp pro cds, and i know my cd rom drive doesn't have problems reading the files.  This has only happened when I swapped out my WD 250gb ata drive for the sata raptor.
    My power supplies (came with chieftec case from newegg) settings are as follows (as I've heard this may be a problem):
    +3.3V = 22.0a, +5v = 36.0a, +12 = 18a
    I'd love any suggestions.  I've already flashed the bios to 1.2 and it doesn't seem to help.  Thanks.

    I've taken one stick of ram out (it occured to me to do this just after i posted!), and it seems to be installing.  I am still getting the "cannot copy file" errors, but if i have it retry a couple of times, it will usually go through.  After that though, it still gives me "fatal errors" because it didn't copy all of the setup info onto the hd.
    I was hesitant to put the system specs in my sig because i'm buidling this for someone else, but here they are:
    A64 3200+
    512 (1 stick) corsair twinx 3200LLPT DDR
    WD 36gb raptor - connected to sata 1
    plextor dd rom drive
    floppy drive
    and 2 case fans and the cpu heatsink/fan
    Do you guys think that the power supply is the root of the problem as I've heard suggested?  I thought this Chieftec rated at 450W would be enough.  I will try and pick up a case with an Antec 380w PSU and try it out.  I know that it's not a problem with the cd because i've used it to install on the same system, except it was on a WD 250gb ATA drive.  Everything went fine on that installation.  I've only been having this problem when trying to install on the raptor through sata.

  • PSC 1610 installation administrator rights

    I am installing the drivers from the installation CD and get a message that the install cannot go forward unless I'm logged in as an administrator.  I AM logged in to the primary (and only) account which specifically says that it is an administrator account.  This is a Win-7 system.  How can I convince the install disk to continue?  BTW, I have installed this same printer on at least 4 other computers in the past so I know that it is capable of working properly. 

    Hello Thom_H,
    Welcome to the HP Support Forums!
    Your install issue with the PSC 1610 installation could be the cause of a "hidden" administrator account. Take a look and try the suggestions here: Enable the (Hidden) Administrator Account on Windows 7, 8, or Vista.
    Let me know if this helps gets the printer installed.
    Cheers,
    JERENDS
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • PSC 1610 WINDOWS 8.1 OFFICE 2007

    I have a problem with my psc 1610 printer when I   install the full packet driver on my acer Aspire AS3410.
    I cant print from Internet og office 2007 but I can make a scan and copuý from my acer.
    I have a Lenovo with the same windows 8.1 and office 2007 - no problem by using my printer.
    I have tried to install the packet severel times whitout any solution of the problem and tried  print and scan doctor nothing helps - hope you can help me.
    [Edited for Personal Information]
    This question was solved.
    View Solution.

    Hello @penalgade , and welcome to the HP Forums, I hope you enjoy your experience!
    I see you're looking into print issues.  I would like to help!
    I would suggest Uninstalling the Printer Software.
    Once it is uninstalled, I would suggest putting your system into clean boot mode within the Microsoft configuration.  You can do so by following this document: How to perform a clean boot in Windows.
    Once the computer is in clean boot mode, I would suggest reinstalling the HP Printer Install Wizard for Windows.
    Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • Can I share HP PSC 1610 All-In-One series printer through Bonjour?

    I have an iBook G4, and a Mac Mini (10.4.11- Tiger) with a HP PSC 1610 All In One series printer connected to it by USB. On my iBook G4, the printer comes up under Shared Printers in the Printer Setup Utility but when I click on it, and press Show Info it freezes.. so I was wondering, is there a way to connect to the printer wirelessly with the correct driver (because the driver doesn't show up in the driver list... and the driver is installed.)

    Hi my printer psc 1610 hp not picking paper

  • Error while installing Mini SAP Basis system 4.6D test suite

    Hi Gurus,
    I am getting error while installing Mini SAP Basis system 4.6D test suite on my laptop. I trying to install this version under Windows Xp. I tried so many times to rectify this error but no use. i followed the instruction in the readme file.The error is below in quote.
    "InstController MakeStepsDeliver:108 connection to GUI of installation tool has been cut  off.Installation has been stopped."
    your help very much appreciated...
    Regards
    dinesh.a

    is win xp supported for mini sap 46d?
    -> try netweaver 2004s instead ...
    GreetZ, AH

  • Cannot install itunes on win 8.1

    I have a Win 8.1 Pro HP ENVY 15t-k000 x64-based Intel Core I7-4710HQ with 16GB Memory, 100
    GB SSD and 1TB HDD.  When I originally got the system I downloaded and installed iTunes (don’t  remember which version it was) on it with no problems.  Eventually an iTunes update asked to be applied (don't remember which one), it did not go on smoothly but
    iTunes has not worked since.  If I try to start iTunes would get message "The program can't start because
    MediaToolbox.dll is missing.  Try reinstalling the program to fix the problem.  ITunes
    was not installed correctly.  Please reinstall iTunes.  Error 7 (Windows error 126)."
    I downloaded iTunes64setup.exe (Ver. 11.3.1.2 on 8/17/14) and it would not install for
    various reasons.  I got back to the problem on 3/2/15 and downloaded iTunes6464setup.exe ((Ver. 12.1.1.4) and it will not
    install.  Primarily gives error "An error occurred during the installation of assembly 'Microsoft VC80.CRT,
    type=win32 version "8.0.50727.6195",public Key Token='1fc8b3b9a1e18e3b', processor architecture"amd64".  Please refer to Help and Support for more information.  HRESULT: 0x80070002.
    Now, I have  since removed all iTunes programs as per the removal list (three different
    Registry cleaning and removal tools) to make sure I got everything and tried to
    reinstall.  Got the same results (the VC80 error).   I ran a lot of various tests, even went back and tried to install the Ver. 11.3.1.2
    download and didn't get the above VC80 message but got many more assorted
    messages, mostly concerning missing .dll entry points, some of which I loaded
    but to no avail.
    I am back to wanting to work with the latest iTunes6464setup.exe (Ver. 12.1.1.4).  I believe VC80 message above has to do with
    iTunes trying to install an update to a Visual C ++ 2005 Service Pack Redistributable but am not 100% sure.  I
    have also tried several other methods of install e.g "Clean" system install, Safe Mode, all compatibility options, etc.  At this
    point I am about to give up on iTunes as a media player. I have read all the internet solutions that I
    could find but none of them seem to address my exact problem.  Let me remind you there is a distinct
    difference between Windows 8.0 and 8.1.  A lot of Win 8.0 discussions just does not apply to Win8.1.
       Thanks for any help or insight you can provide.

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
    Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
    There is a mild hint from another thread that disabling Windows Firewall during the reinstall might help with the Microsoft.VC80.CRT error. I'd also try the "for older video cards" version if you haven't already done so.
    tt2

  • Labview app developed in Win XP wont install properly on win 7

    I developed an app which had hard coded path filenames and built the installer to install them in those specific directories.  I.E. : c:\Program Files\app\myfile.txt.  I ran this installer on a win 7 machine and it put the files in the directory C:\Program Files x86\app\myfile.txt.  As a result, the program does not work because it is looking for the file in the original directory where it isnt.
    How do I get around this problem and allow my app to be installed in either Win XP or Win 7?

    That second example you linked to has nothing to do with project build or installation directories. It is an example that is related to this: Why Does My Executable Not Work When Using the Current VI's Path Constant?
    id wrote:
    Since this new Get System Dir.VI has many more selctions, have these features been incorporated into the project build tool?
    What exactly are you asking here? The building of the installer uses symbolic names for where the files should be placed (ie., "Program Files" to indicate whatever folder is specified as the installation directory). Thus, a user can select to install the application onto some other drive, such as "E:\YourApp", instead of "C:\Program Files" (or "C:\program Files (x86)" on a 64-bit system). There should be no reason for you to set these paths in the installer specification. This simply moves the path hard-coding from the code to the installer. How is this any better?
    Your code should use the Get System Directory VI to get the paths programmatically.
    You should also keep in mind that Windows 7 has further restrictions on the "C:\Program Files" and other folders (such as the root drive). This has come up before, so you can search for these posts. If you want to save something programmatically, under XP it was not an issue, but under Windows 7 it will be an issue if your target is the "C:\Program Files" directory, if that's where the application was installed. Microsoft created the "C:\Program Data" folder for post-installation, run-time saving of files by the application.

  • Printing to HP PSC 1610 via Windows XP

    I have an HP PSC 1610 All-in-One printer connected to a Windows XP machine and is setup to be shared across the wireless network. I can see and add the printer on my MacBook Pro using the drivers that came with the printer and I able to print to it but when a document is printed, only garbage comes out. Any ideas how I can fix that?
    15" MacBook Pro   Mac OS X (10.4.6)   2 GHz Core Duo, 512MB RAM

    Thanks, got it to work.
    Installed the:
    Foomatic-RIP (http://www.linuxprinting.org/macosx/foomatic/)
    hpijs-foomatic and ESP Ghostscript (http://www.linuxprinting.org/macosx/hpijs/)
    Then added the printer through the Printer Browser.
    15" MacBook Pro Mac OS X (10.4.6) 2 GHz Core Duo, 512MB RAM

  • Installed iTunes on Win 7. Everything is there except when I hook up my phone the mene has all the active buttons, but there's no lettering on the screen to see what they are

    Installed iTunes on Win 7. Everything is there except when I hook up my phone the mene has all the active buttons, but there's no lettering on the screen to see what they are

    (Apologies for butting in wiclee.)
    The effect is usually caused by trouble with the Segoe UI fonts on your system. Unfortunately it's a bit trickier to deal with on Windows 7 systems than Vista or XP. (The "Vortical" instructions which can fix it for almost all folks on Vista and XP aren't applicable to Windows 7.)
    Try having a look through the following (unfortunately very long) topic. It contains a lot of information on the Windows 7 variants of this, and possible methods for fixing the various Segoe UI-related issues that might be in play:
    iTunes 10.1 Missing Text

Maybe you are looking for