Hp psc 2110 all-in-one -best, normal fast lights just flash continually

My hp psc 2110 all-in-one I have had for a number of years and has never let me down before.
The problem started when I tried to print from a PC on my home network. The request was on the queue but wouldn't print and the 3 lights for Best, Normal and Fast Quality just flash continually.
I also keep getting a window come up entitled HP OFFICEJET REFLASH asking for the original setup disk.
I have responded and put the CD in the drive.
I have uninstalled the program and reinstalled a download from HP.com website but still the lights continue to flash.
Can anyone help PLEASE!!!!!
Best regards
The Mole
[email removed for privacy reasons]

Similar Messages

Psc 2110 all-in-one, Windows Vista 32-bit,

psc 2110 all-in-one, Windows Vista 32-bit, Tried to scan and now printer will not scan or print. I have uninstalled and reinstalled and it still doesn't work. HP diagnostic said I needed a new driver and HP by passes that request.
Scanner hasn't worked very well since I put the printer on Vista. How do I get a download for a new driver from HP?

Hello 2_old ,
Please let me take a moment to say "Welcome Back" to the HP Forums.
I see that you are receiving an error message about the left ink cartridge on the printer.
It is possible that the ink cartridge is low or even empty.
First off, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
If the error is still on the printer after the unit has been connected to a wall outlet, I suggest you try another cartridge.
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
I hope you have a great day and thank you for your time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

User Defined Paper Size, Windows 7, PSC 2110 all in one printer

I am trying to print a 5x7 photo using the user defined paper size of my PSC 2110 All-in-One printer. When I used X
P os, it was easy to do. Since upgrading to Windows 7, I have been using the default drivers that load with that, but it doesn't have the ability to define paper size. Is there a driver available that would let me do this? I've tried to use compatability mode to get the original drivers from the installation disc to work, but it won't do it.

Hi,
The last update was for Vista, 5 years ago:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=4220...
At this stage, Windows 7 only supplies a very basic and generic print driver for this printer just for print. You may want to keep that way or buy a new printer.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

HP psc 2110 all in one and Windows 7

I have an old HP psc 2110xi all in one printer that worked fine on Windows XP. I followed the HP site instructions and did not try to load the install disc that came with it on my new Windows 7 64-bit computer. I just plugged it in and Windows 7 was supposed to have a drive for it, but there would be limited functionality of the tools per the web site.
Well actually I can now only scan to image files. The windows scan program offers only: BMP, JPG, PNG and TIF as file choices in the drop down menu. I can no longer scan to pdf files.
I have lost a lot more functionality than just not being able to see the ink level,clean the cartridges and print a test image. I am most interested in the lost ability to scan to a pdf file.
Does anyone know how I can get this back?

Hi,
Indeed the provided functionality offered by Windows Image Aquision scanning is more limited and does not PDF support.
If you Have MS Office you might be able to scan PDF files with it in some of the editions (I believe MSOffice should support WIA scanners as well):
For example, Office 2007 can provide those capabilities as you may see within the linked document.
You may also check 3rd party software (as VueScan for example) which support your scanner and provide PDF and OCR scan capabilities.
For ink level, i believe the Extended Self Test report should provide the ink levels, however i'm not perfectly sure.
You may try printing a report as following:
Press Setup and Start Color . Press the Right Arrow to scroll to Model Number and Press Enter or OK
You will not be able to get any functionality back, as te device does is not fully compatible with Windows7..
Hope it helps,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Hp psc 2110 all in one printer

The printer sounds like it is stuck. I've turned it off and on and also unplugged and replugged it in. I cann't print or scan.

Hiya @jazee,
Do you see any error messages on the computer or printer? If you have a Windows operating system please run the HP Print and Scan Doctor. The HP Print and Scan Doctor is a free utility (tool) that helps to quickly resolve common printing, scanning and connectivity issues including but not limited to:
Connectivity :
USB: Verifies that the USB connection from your computer to the HP product is working correctly.
Network: Verifies that the network connection between your computer and your network is working correctly.
Device Status Test : Checks for device errors such as out of paper, paper jams, carriage stalls, and paper feed issues, and then provides instructions for fixing the error.
Driver Check : Checks for missing or corrupt driver files.
Device Manager : Checks for problems in Device Manager that would prevent printing.
Device Online : Checks if the product has been paused or set to offline, and then sets the status back to online if necessary.
Print Queue : Checks for and clears pending print jobs in the print queue (a log of print jobs waiting to print).
Port Match : Checks the port settings for the HP product.
Device Conflicts : Checks for conflicts with other drivers, such as other printer brands.
Ink Issues : Checks the cartridges and ink levels for issues that affect print quality.
Print Settings : Checks and adjusts the print quality settings.
Test Print : Prints a test page for print quality evaluation, and provides options for cleaning and aligning the printhead if necessary.
Scan Tests : Checks the scan mechanism, drivers, and registry entries.
You can also click the Printer menu to find the additional features such as cleaning printheads, aligning printheads, checking ink levels, and viewing advanced printer data for your selected printer.
Source: Try the HP Print and Scan Doctor for Windows
Click here to download and run the Print and Scan Doctor> www.hp.com/go/tools
Once we identify the issue, you can use one of the following documents;
A 'Paper Jam: Clear Jam, and then Press Enter' Message Displays for the HP PSC 2100, 2110, 2170, and...
'Paper Mismatch,' or 'Paper Size Mismatch' Error Message Displays When Printing
A 'Paper Mismatch' or 'Paper too Narrow' Error Occurs While Receiving a Fax
An 'Open Door, Clear Carriage Jam, and then Press Enter' Error Message Displays for HP PSC 2100, 217...
'Problem with Printhead,' 'Printer Failure,' 'Ink System Failure,' or a '0x...' or a 'C2...' Error M...
A 'Scanner Failure' Message Displays on the All-in-One Control Panel and You Cannot Scan, Copy, or F...
A 'No Scan Options' or 'Scan settings are not set' Message Displays for HP All-in-One Printers When ...
'Ink Alert' or 'Low on Ink' Message Displays on the Computer or the Control Panel
The Control Panel Display Always Reads 'Initializing', or the Product Does Not Start
Low Ink Warning Message Appears after Installing a New Ink Cartridge
'Turn Power Off then On' Message Displays on the Control Panel
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Hp psc 2110 all-in-one ink level status

This is an old printer, the owner's manual has a 2002 copyright date. I thought all printer, even one this old, would be able to display the ink status of the various cartridges on my computer screen. I talked to tech support and they said to download the driver and a printer icon should be displayed on the bottom right of my screen. This laptop has Windows 7 and all the HP drivers are supposed to be downloaded automatically. I tried to update the driver from hp.com but it didn't really do anyting. There still is no printer icon on the bottom right of my screen. Tech support said that when I click on the icon I should be able to get to a page that shows ink levels for cartridges. Anybody have any ideas?
Thank you for your help. I'm a bit of a novice here.
This question was solved.
View Solution.

Welcome to the forums hifiguy69!
I saw your post about wanting to check the ink levels on your PSC 2110 model. With Windows 7 the full software package is not available, therefore you will not be able to see the ink levels from your desktop.
However, if you are to print a self-test, this may show the ink levels.
To print a self test:
On the printer, select Setup or Menu until "Print Report" displays, then select Enter.
I hope my post helped!
Have a great Monday
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Mavericks scanning on psc 2110 all-in-one

I have loaded and used the priniting function on the psc 2110 successfully. I can't seem to figure out how to load the scan functionality. I tried to use the original install disk (worked on an XP machine) and was told it was for the Power PC chip. Is there anyway to get this old beast to scan under Mavericks?

Hey there @jimkz , Welcome to the Forums!
I saw your post about wanting to scan with your PSC 2110 and Mavericks. I have dug around for some information for you and will post a guide below. There is no downloadable driver available for this model and Mavericks, however, there is some other scanning options that will probably work for you.
OS X v10.9 Mavericks: Installing and Using the Printer on a Mac
Click on "How do I scan with the driver from Apple Software Update?" to see the scan options.
I hope this helps!
Best wishes,
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Setting up HP cleaning kit for psc 2110 all-in-one

The CD Rom which came with my subject printer is not compatilbe with Windows 7. Is there a site which has the download for the subject cleanilng kit??

Hi,
Indeed the provided functionality offered by Windows Image Aquision scanning is more limited and does not PDF support.
If you Have MS Office you might be able to scan PDF files with it in some of the editions (I believe MSOffice should support WIA scanners as well):
For example, Office 2007 can provide those capabilities as you may see within the linked document.
You may also check 3rd party software (as VueScan for example) which support your scanner and provide PDF and OCR scan capabilities.
For ink level, i believe the Extended Self Test report should provide the ink levels, however i'm not perfectly sure.
You may try printing a report as following:
Press Setup and Start Color . Press the Right Arrow to scroll to Model Number and Press Enter or OK
You will not be able to get any functionality back, as te device does is not fully compatible with Windows7..
Hope it helps,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Paper feed out of sync on HP PSC 1510 All-in-One Printer Scanner

Paper feed out of sync on HP PSC 1510 All-in-One(SN MY59SD224W0498). Goes to flashing orange light. With Vista Home Premium 32-bit, 6.0.6002 Service Pack 2 Build 6002. USB connection to HP Pavilion GU658AA-ABU a6250.uk .
After cleaning ink drip tray including removing & refitting the small panel in the base towards the rear RHS of the printer and also Super Glueing a small wedge of timber to close split shaft bearing for rear print feed rollers - looking from rear with clean out door removed this is at the LHS where the cogs are - paper feed is out of sync. When turned on with paper in feed tray printer draws in paper until about 2" (5cm) of paper protrudes from delivery slot & then stops. Paper jam is indicated by flashing orange light. On pressing Cancel/Resume, paper is expelled & another sheet taken in with the same results. Have turned off & restarted. Have moved cartridge cleaner tray right from front to rear & tested & then brought it right forward again & tested. Have turned off & unplugged power & USB & restarted after more than 30 minutes. Have uninstalled driver & downloaded & installed anew. Downloaded & ran the HP Print Diagnostic Utility. All to no avail. Any suggestions anyone?

Hi there nobster,
This article should cover the blinking light. However, I suspect the printer requires servicing.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

How can I fix a check paper error on the HP psc 1210 all in one printer?

Product name/number: HP PSC 1210 all-in-one
OS: Windows 7
Error Msg: Check Paper light flashes
I have verified there are no paper jams, paper is loaded, print cartridges move freely and rollers are clean. Is there a a paper out switch that can fail?

Hi there,
This article should cover the issue you are experiencing. Give the steps outlined a shot and let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

HP PSC 2410 All-In-One - use in Windows 7 64-bit environment

Hi,
I have had this HP PSC 2410 All-In-One printer for some years now and it has worked pretty flawlessly in a Windows XP Pro SP3 environment for that time.
Some months ago, I purchased a new computer system and went to the Windows 7 64-bit OS (not interersted in Windows 8 at all) and whilst I have installed the printer successfully and it works, the software suite that came with the printer on the CD will not install for this environment and therefore I no longer have access to the various Maintenance Options that were available under the Windows XP Pro OS, such as the cleaning and Fax options.
Searching for something for the Windows 7 64-bit OS threw up two options - the driver update and the utilities tool wizard. After going down the driver update route, no software suite was available and in fact the update stated that the driver was installed by Windows 7 automatically. That seems to be the case as the printer works fine in print mode, scan mode (from the desktop menu) and it detects SD cards through the slots.
However, there is no software to allow me to fax or clean or do any of the other options available under the HP Suite that came on the CD.
Going down the Utility route got me downloading a file - HPPIW.EXE - that would look at my current printer installation and check with HP for any updates. After many attempts, the utility simply CANNOT find my printer even though it is installed, works properly and even windows sees it! No amount of recycling the ON/OFF button or rebooting the computer allows this utility to detect the printer at all. It is installed via USB on the Windows 7 64-bit Family PC and windows updates are always fully updated.
I am currently considering the purchase of a new HP OfficeJet 8600 Pro Plus to use as the family printer with the Windows 7 system - and move this HP PSC 2410 upstairs to connect it directly to my Windows XP Pro SP3 personal desktop and use the original CD to install it. My Canon IP4200 Pixma has just died on my personal PC upstairs.
However, until I do that, is there any of the Software Suite available that would work in the Windows 7 environment that would allow me to use the various functions such as Fax and cleaning that were available under the old XP environment and obtained via the CD? Was the Suite of software ever updated for Windows 7?
Thank you,
Lee James
West Sussex UK
This question was solved.
View Solution.

Hi BAW9DV,
I hate to hear you are having issues. While there will not is not a specific software utility that will complete the tasks desired, maintenance can be completed from the front panel of the unit. Windows also has an application for faxing from the computer as well that may work with this device. Please see the information below that may enable the functions desired.
Faxing:
1. Use Windows Fax and Scan
   A. Type Windows Fax and Scan into search box
   B. Configure fax machine for use. Click Here to view Microsoft documentation for use. Note: This is a 3rd party website. HP and I are not responsible for content of this site.
   C. Select New Fax
Maintenance tasks from front panel:
Running the Clean Print Cartridges Utility Click Here
Printing setf-test page Click Here
Evaluate test page Click Here
Align the Cartridges: Press setup-Press 5, then press 2
If you the work around options are not acceptable the 8600 model would most certainly meet your needs when compared with this unit. However I encourage you to contact HP to see what upgrade options are available for this unit. It will most likely be another Photosmart model/type unit, but in many cases upgrades are offered at a discounted rate to our valued out of warranty customers. Global contact information can be accessed Here.
P.S. If you upgrade through technical support, be sure to ask about carepacks. Extended warranties may also be available at a discounted rate for upgrading.
Hope this helps!
Also, remember a click on the Kudos star to the left is a quick "Thanks" for a helpful post.
Please select the "Accept as Solution" button on the post that best answers your question.
I appreciate your input !
Thank You,
I work for HP.

HP PSC 1210 All-in-One Printer -- need Software (scanner directory), for windows 7 (64) bit

hi,
I am kind of done with this Printer ! lost hope in customer care and support hit with HP ! from Past 10 days searching a software to scan few doc from my printer 1210 (HP PSC 1210 All-in-One Printer) but i dint find.... i got one from some source (166 Mb) file, but to my surprise its not compatable with Windows 7. i am totally depressed now.... Please help me to find software for this (scanner document) I have lost the CD lont time back can i download This some where?

Hi there,
I understand you're looking for drivers for your PSC 1210 on Windows 7. I will certainly do my best to guide you in this issue.
At this time there are no HP drivers available for this printer for Windows 7. You can still use the printer with Windows 7, you will just have to use the drivers available within Windows 7. That document will walk you through what you need to do in order to get printing again, and will also show you how to scan with this Windows driver.
Hope this helps, have a great day!!
Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
**MissTeriLynn**
I work on behalf of HP

Scanning in win 8.1 for HP psc 2355 all-in-one

I can't get my HP psc 2355v all-in-one to scan. The printer tells me to install HP software for this feature when I try to start scan from the printer. I have installed the drivers multiple times and cannot find a way to execute the scan from my computer.

Welcome to the HP Community @bleubeck ,
I read about how you are having troubles with scanning to your Windows 8.1 system from your PSC 2355 printer, and I wanted to reach out. There are no drivers or software available to install with this specific printer model on Windows 8.1, as the model is older and OS is newer. I would think that your best bet would be to try running the Print and Scan Doctor to see if the diagnostic tool can detect the printer and scan. If this does not work, you can also try scanning from Microsoft Paint as a work around option.
If all else fails, you can contact HP directly and discuss your printer options to upgrade to a new printer compatible with Windows 8.1.
Reach our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
Good luck, and thanks for visiting the HP Forums!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

HP TouchSmart 600 and HP psc 2210 all-in-one printer

Hi SiobhanF,
I just registered and this is my first post.
I recently bought a new PC...an HP TouchSmart 600. My printer is a HP psc 2210 all-in-one. I need advice on whether the two are compatible and if so how to get them working together.
Thank you,
waj

This is likely caused by the failure of one of your cartridges. Remove the black cartridge and print a test page. Does the printer print at normal speed? Is so the black cartridge was the issue and should be replaced. If not then put the black cartridge back in and remove the color cartridge and print test page. If the printer now prints normal speed the color cartridge was at fault and needs to be replaced.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Psc 1315 all-in-one printer will not feed paper. There is no paper jam.

psc 1315 all-in-one printer has stopped feeding paper. There is no paper jam.

hi there sorry to learn that you are having this issue.
Are you still facing this issue? If you are I will do my best to help you.
Have you upgraded the firmware of your printer lately; you can get the latest firmware in the main support page for your printer
This is the main support page for your printer, GO HERE Go to software and drivers download and select your operating system. You should also upgrade the firmware of the printer.
If you are not experiencing this issue any longer, May you let me know, your time and courtesy,
will be deeply appreciated.
Regards;
RobertoR
remember ==▼
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

Hp psc 2110 all-in-one -best, normal fast lights just flash continually

Similar Messages

Maybe you are looking for