HP PSC 2175 All-in-one prints blank pages from word, chrome and notes

My HP all-in-one printer PSC 2175 all-in-one has suddenly decided to print blank pages.
So far I've tried printing from Word, Notes and Photoshop but come up with nothing. 
It prints test pages and diagnostic pages without any problems and it makes direct copies without problems.
The diagnostic tool can't find anything wrong. 
I've run all the software I could find on Swedish HP. 
I've reinstalled the printer, reinstalled Word, repaired Windows, nothing helps.
I have Windows XP, fully updated.
Any suggestions?
HP PSC 2175

I am having this problem too - just prints blank pages. Ran the tests checked cartridges settings sanity nothing.Scans fine.I currently have three duff printers in my office which is more than frustrating...

Similar Messages

  • HP printer only prints blank pages from Word or Pages

    My HP all in one printer only prints blank pages from Word or Pages documents, prints ok from anything else.  Any ideas? Have deleted and readded printer removed HP software reinstalled software from Apple etc. Help please!

    If this just happens from these two programs, it's most likely a driver conflict.  If typically using an alternate driver will alow you to get around this.  To try this, add the printer's que to the Mac.  Click the dropdown next to Use and choose a driver that's not for your printer.  Typically the best one to try is another Photosmart dirver, but Deskjet drivers will work as well.  I would make the instructions a bit more clear, but I don't have access to a 10.6 Mac.  Let me know if this works or not. 
    I am a printer tech for HP.

  • HP Deskjet F2480 All-in-One prints BLANK PAGES

    Dear All, I have a serious issue with my HP Deskjet F2480 All-in-One Colour Ink-jet - Printer / copier / scanner.The thing is that it prints BLANK PAGES. I tried everything from the manualHP Deskjet F2400 All-in-One series:
    "Print troubleshootingTry the following solutions to resolve the issue. Solutions are listed in order, with the mostlikely solution first. If the first solution does not solve the problem, continue trying theremaining solutions until the issue is resolved.• Check cartridges• Check paper• Check product• Check printer settings• Reset the product" IT DIDN'T WORK! The printer is still printing BLANK PAGES. The ink level is sufficient to print a page - the HP Solution Centerapplication says that 'the actual ink levels may vary' but it shows a tick-mark, which means that everythingshould work. However it still start the process of printing (blank) and blows the page again - blank page. HELP? HOW CAN I RESOLVE THIS PROBLEM?  janviv1

    I am having this problem too - just prints blank pages. Ran the tests checked cartridges settings sanity nothing.Scans fine.I currently have three duff printers in my office which is more than frustrating...

  • HP 722C prints blank pages from Word 2010 But can print successfully from Internet Explorer 9

    I installed the patch from HP for my printer.  I can print successfully from IE 9.  However, blank pages are all I get when printing documents from Microsoft word 2010.  My operating system is Windows 7 64-bit. home premium  I do not get any error messages when printing.  Any suggestions are appreciated.

    I still cannot print from Word 2010.  I can print from Adobe reader.  I did uninstall and reinstall Office 2010.  I still cannot print from Word 2010.

  • Paper Jam for HP PSC 1610 All-in-One Printer

    Paper Jam for HP PSC 1610 All-in-One Printer:
    I had a paper jam and cleared the paper from the printer.  Now every time I turn the printer "on" it picks up the top piece of paper from the tray and runs it about ½  to ¾ of the way thru the paper feed, stops, and then displays message "paper jam clear paper and then press OK".  When I do that it simply picks up the next piece of paper off the tray and does the message again.  If I push the OK button on the printer it will simply finish the ejection and then pick up the next paper from the tray, and do the same thing.  I have examined the interior (and exterior) of the printer for paper scraps and  any other obvious sign of trouble (dirty drive wheels, missing rollers, broken springs, etc...) and can not see anything unusual. I can not print a test print because of the paper jam message.  I am running Windows XP and the printer has been working fine for months (until this recent jam).  I did all the steps from the HP fix it site including clean rollers, plug and unplugged,  carriage travel OK and more. Don't know what to do now........Any help would be great!!!!   Thank you!

    Hi my printer psc 1610 hp not picking paper

  • I have a psc 2175 all-in-one that seems to have a bound up (or stuck) scanner/copier bar assembly

    please help me, i have a psc 2175 all-in-one & it seems to have a bound up (or stuck) scanner/copier bar assembly. it keeps make a repetitive noise as if it is trying to move but it only moves about half an inch & goes back & tries to do it again & again. i can't afford a new printer at the moment & i really need to copy a couple of forms before i have to work in the a.m.- thx in advance.

    Hi - Try the steps in this document.  Specifically, you might try solution 3 first.
    Hope that helps.
    Say Thanks by clicking the Kudos thumbs up. Please mark the post that solves your problem as an Accepted Solution so other forum users can utilize the solution.
    I am an HP employee.

  • HP Officejet and PSC Full Feature Software for HP PSC 1210 All in one printer

    Hello ,
                 I have  HP PSC 1210 All in one printer but i am using windows 7 system.how can i find
                                                                                'HP Officejet and PSC Full Feature Software'
    compatible for windows 7, in hp.com i sould find the above software for windows xp but for windows xp its not working, my printer physical keys are not working so i need software to do everyything from print to scan, copy etc from my windows 7 laptop itself. pls help with sofware for windows 7

    Hi,
    There is not a full feature software Win 7 download available for the HP PSC 1210. The following document includes instructions on how to install the in-OS Win 7 driver with instructions on how to scan:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01796879&cc=us&dlc=en&lc=en&os=4062&product=907...=
    I work for HP.

  • Hp psc 1315 all-in-one printer

    I have installed a hp psc 1315 all in one printer on my new Mac OS X version 10.9.5.
    While I can print without any problems, I don't have access to scan a document from the printer to my computer.
    Can anyone help with this?
    Thank you.

    Hello @annlf 
    Welcome to the HP Community!
    I hope to help you with the scanning concern you have today.
    Unfortunately, you will not be able to scan using HP software with your PSC 1315 (older model), on Mavericks (newer OS X), as there is no Full Feature driver (includes scanning software) available.
    However, you do have some other options to scan. See this link for your options. Scroll down when the guide loads and select "How do I scan with the driver from Apple Software Update?"
    OS X v10.9 Mavericks: Installing and Using the Printer on a Mac
    Have a wonderful Wednesday
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Installing HP PSC 1350 all-in-one printer/scanner

    In the past, I could usually solve the "Offline" or "Not Connected" problems by unplugging my printer for a few minutes, but that no longer works. So, I decided to buy another one. However, just before clicking on the BUY button on Amazon, I decided to try to fix the problem one more time. Part of the "fix" was deleting my printer from the computer and then reinstalling it. This is where I'm now stuck. I deleted it, but I can't reinstall it. I get to the ADD window, but everything is grayed out. So, how do I install my printer? I might add that the HP instructions that I was following (OSX v. 10.9 Mavericks- Installing and using the printer on a Mac) are what got me this far.

    Have you installed the v10.9 Mavericks compatible driver yet >>  Software & driver downloads HP PSC 1350 All-in-One Printer | HP® Support
    After you download the driver, open System Preferences > Printer & Scanners > Print
    Delete the current printer by selecting it then click -  (minus)
    Then click + to add the printer back in.
    That should load the driver for you.

  • HP PSC 1210 All-in-One Printer -- need Software (scanner directory), for windows 7 (64) bit

    hi,
    I am kind of done with this Printer ! lost hope in customer care and support hit with HP ! from Past 10 days searching a software to scan few doc from  my printer 1210 (HP PSC 1210 All-in-One Printer) but i dint find.... i got one from some source (166 Mb) file, but to my surprise its not compatable with Windows 7.  i am totally depressed now.... Please help me to find software for this (scanner document) I have lost the CD lont time back can i download This some where?

    Hi there,
    I understand you're looking for drivers for your PSC 1210 on Windows 7. I will certainly do my best to guide you in this issue.
    At this time there are no HP drivers available for this printer for Windows 7. You can still use the printer with Windows 7, you will just have to use the drivers available within Windows 7. That document will walk you through what you need to do in order to get printing again, and will also show you how to scan with this Windows driver.
    Hope this helps, have a great day!!
    Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    **MissTeriLynn**
    I work on behalf of HP

  • Psc 1315 all-in-one printer will not feed paper. There is no paper jam.

    psc 1315 all-in-one printer has stopped feeding paper. There is no paper jam.

    hi there sorry to learn that you are having this issue.
    Are you still facing this issue? If you are I will do my best to help you.
    Have you upgraded the firmware of your printer lately; you can get the latest firmware in the main support page for your printer 
    This is the main support page for your printer,  GO HERE Go to software and drivers download and select your operating system. You should also upgrade the firmware of the printer.
    If you are not experiencing this issue any longer,  May you let me know, your time and courtesy,
    will be deeply appreciated.
    Regards;
    RobertoR
    remember ==▼
    You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

  • Hp psc 1210 all in one printer feeding error

    I have a model 1210 all in one printer and it will not feed paper. it sounds like something its working, but not gripping the paper. PLEASE ADVISE

    Hello @anne0701 , and welcome to the HP Forums!
    I can see you're experiencing paper feed issues.  I would like to help!
    I would recommend performing a  power reset.  Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
    I would also suggest following the steps in this video on PSC feed issues:
    Fixing Paper Pick-Up Issues - HP PSC 1200 All-in-One Printer
    Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • HP psc 1350 all-in-one printer

    Re HP psc 1350 all-in-one printer, it it possible to connect a usb wirless adapter into this printer, so that it effectively becomes a wireless printer?  (dumb question? but thanks in advance anyway)
    This question was solved.
    View Solution.

    You need a device called a wireless print server. Get one with a usb interface. Here is an example of one.
    WPS

  • HP PSC 2355 all-in-one printer cuts off bottoms of letters

    My HP PSC 2355 All-In-One Printer cuts off the bottoms of letters. Photos are fine. 3rd HP black cartrige, got worse today.
     On a Mac, 10.9.3.

    Hi @timed 
    I would like to help you with your 2355 printer. A printer reset can initiate an alignment. Please use the following document to troubleshoot the issue, and let me know the outcome of your efforts; Troubleshooting Print Quality Problems with the Diagnostic Page.
    If the issue remains unresolved after following all of the steps in the link above, I recommend contacting HP.
    Don't hesitate to call, although the printer may be out of warranty, the cartridges could be in warranty; therefore, there wouldn't likely be a fee for the phone support. HP will, at HP's option, either replace products under warranty that prove to be defective or refund the purchase price.
    They could even determine after troubleshooting that it is a problem with the printer, in which case they may offer you a discount on a newer model.
    The number to call HP is 1-800-474-6836 for Canada and US, or you can Contact HP Worldwide.
    To find the “Warranty Ends” date, look in the following table for the date's location on each product. The date follows the YYYY/MM/DD or YYYY/MM format, where YYYY indicates the year, MM indicates the month, and DD indicates the day.
    I hope this helps.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • HP PSC 1310 All-in-One Printer

    Hi
    I need to download the the full set of drivers & software so i can install them on a friends computer who does not have a internet connection yet and will not for a while yet..
    the only ones i can see need to connect to the internet to download the drivers..
    Printer = HP PSC 1310 All-in-One Printer
    Operation system  = Windows 8.1 x64
    PS: Why do printer companies make it so difficult to download the full set of drivers\software when people have spent good money buying there printers.... i get asked this question a lot but people....
    thanks
    We all make mistakes said the Dalek climbing off the Dustbin.

    Hello,
    Full feature driver is available for download for this model. Please select the OS from the drop down list first and then select next to download the driver.
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=2093&lc=en&cc=us&dlc=en&sw_lang=&product=3745...
    I work for HP but my posts and replies are my own.
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as Accepted Solution

Maybe you are looking for

  • Saving a pdf document to my iPod Touch Gen 1

    I have a 16gb Generation 1 (Dec 2007) iPod Touch running system iOS 3.1.3 and I love it!  I shall be taking a trip and do NOT want to carry my MBP this time (vacation!) - but do want my iPod Touch with me. I'd like to have a large (28 mb, 262 page) G

  • HotSync will not start with new Tungsten E2

    I'm upgrading my old Tungsten T2 device with an E2.  Following the upgrade instructions, I set up the E2 last night and let it charge overnight, then this evening did a final HotSync with the T2, and ran the installation program on the CD that came w

  • BEx Web - Inserting Tabs with multiple Web Templates

    I encounter much difficulty to find consistent information on how to create a Web cockpit (BW3.5) by making use of embedded Web Templates (using web template web item). In particular, - How to define tab pages? - How to insert an HTML document in one

  • Indesign to swf creates grey border

    I have asked this before. I have been experimenting with exporting a page turning swf file from Indesign. However, no matter what I do the resultant html file has a grey border. It seems to be generated in Indesign but I can't see any way of either c

  • How to tune the SQL & solve UNIQUE Contraint issue using without duplicates

    CREATE TABLE REL_ENT_REF   ROLL_ENT        VARCHAR2(4 BYTE)              NOT NULL,   ROLL_SUB_ENT    VARCHAR2(3 BYTE)              NOT NULL,   ROLL_ENT_DESCR  VARCHAR2(50 BYTE),   ENT             VARCHAR2(4 BYTE)              NOT NULL,   SUB_ENT