HP PSC 2355p All-In-One.

Hello,
I do have a question about a printer HP PSC 2355p All-In-One.
I want to print some photo's that are stored on my PC.
I want them in A5 paper format for my Photo Gallery.
Does someone know how this can be done?
Best regards,
Fluffyfluf
This question was solved.
View Solution.

Correct, you will need to use that particular kind of paper, or it will give you a "PAPER MISMATCH" error. In that selection, whatever paper size you choose, you will need that type of paper in the printer. If you want to print the photos on regular 8.5 x 11, you can just choose LETTER.
**Click the KUDOS star on the left to say 'Thanks'**
Please mark a reply "ACCEPTED AS SOLUTION" if it solved your problem, so others can find it.

Similar Messages

How do I install driver for hp psc 2400 all in one series AND safe wsnmp32.dll Without a Disk?

How do I install driver(s) for hp psc 2400 all in one series ( WIndows 7 laptop) AND a safe version of wsnmp32.dll -- Without a Disk? A tech took the driver off my laptop and I now have no printer/scanner. Help!!
Much thanks!

Hello,
I see that you're having an issue installing the software. I would suggest following this document, which will guide you through several steps on how to resolve the issue.

Can I share HP PSC 1610 All-In-One series printer through Bonjour?

I have an iBook G4, and a Mac Mini (10.4.11- Tiger) with a HP PSC 1610 All In One series printer connected to it by USB. On my iBook G4, the printer comes up under Shared Printers in the Printer Setup Utility but when I click on it, and press Show Info it freezes.. so I was wondering, is there a way to connect to the printer wirelessly with the correct driver (because the driver doesn't show up in the driver list... and the driver is installed.)

Hi my printer psc 1610 hp not picking paper

HP Officejet and PSC Full Feature Software for HP PSC 1210 All in one printer

Hello ,
I have HP PSC 1210 All in one printer but i am using windows 7 system.how can i find
'HP Officejet and PSC Full Feature Software'
compatible for windows 7, in hp.com i sould find the above software for windows xp but for windows xp its not working, my printer physical keys are not working so i need software to do everyything from print to scan, copy etc from my windows 7 laptop itself. pls help with sofware for windows 7

Hi,
There is not a full feature software Win 7 download available for the HP PSC 1210. The following document includes instructions on how to install the in-OS Win 7 driver with instructions on how to scan:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01796879&cc=us&dlc=en&lc=en&os=4062&product=907...=
I work for HP.

How can I fix a check paper error on the HP psc 1210 all in one printer?

Product name/number: HP PSC 1210 all-in-one
OS: Windows 7
Error Msg: Check Paper light flashes
I have verified there are no paper jams, paper is loaded, print cartridges move freely and rollers are clean. Is there a a paper out switch that can fail?

Hi there,
This article should cover the issue you are experiencing. Give the steps outlined a shot and let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

HP PSC 2410 All-In-One - use in Windows 7 64-bit environment

Hi,
I have had this HP PSC 2410 All-In-One printer for some years now and it has worked pretty flawlessly in a Windows XP Pro SP3 environment for that time.
Some months ago, I purchased a new computer system and went to the Windows 7 64-bit OS (not interersted in Windows 8 at all) and whilst I have installed the printer successfully and it works, the software suite that came with the printer on the CD will not install for this environment and therefore I no longer have access to the various Maintenance Options that were available under the Windows XP Pro OS, such as the cleaning and Fax options.
Searching for something for the Windows 7 64-bit OS threw up two options - the driver update and the utilities tool wizard. After going down the driver update route, no software suite was available and in fact the update stated that the driver was installed by Windows 7 automatically. That seems to be the case as the printer works fine in print mode, scan mode (from the desktop menu) and it detects SD cards through the slots.
However, there is no software to allow me to fax or clean or do any of the other options available under the HP Suite that came on the CD.
Going down the Utility route got me downloading a file - HPPIW.EXE - that would look at my current printer installation and check with HP for any updates. After many attempts, the utility simply CANNOT find my printer even though it is installed, works properly and even windows sees it! No amount of recycling the ON/OFF button or rebooting the computer allows this utility to detect the printer at all. It is installed via USB on the Windows 7 64-bit Family PC and windows updates are always fully updated.
I am currently considering the purchase of a new HP OfficeJet 8600 Pro Plus to use as the family printer with the Windows 7 system - and move this HP PSC 2410 upstairs to connect it directly to my Windows XP Pro SP3 personal desktop and use the original CD to install it. My Canon IP4200 Pixma has just died on my personal PC upstairs.
However, until I do that, is there any of the Software Suite available that would work in the Windows 7 environment that would allow me to use the various functions such as Fax and cleaning that were available under the old XP environment and obtained via the CD? Was the Suite of software ever updated for Windows 7?
Thank you,
Lee James
West Sussex UK
This question was solved.
View Solution.

Hi BAW9DV,
I hate to hear you are having issues. While there will not is not a specific software utility that will complete the tasks desired, maintenance can be completed from the front panel of the unit. Windows also has an application for faxing from the computer as well that may work with this device. Please see the information below that may enable the functions desired.
Faxing:
1. Use Windows Fax and Scan
   A. Type Windows Fax and Scan into search box
   B. Configure fax machine for use. Click Here to view Microsoft documentation for use. Note: This is a 3rd party website. HP and I are not responsible for content of this site.
   C. Select New Fax
Maintenance tasks from front panel:
Running the Clean Print Cartridges Utility Click Here
Printing setf-test page Click Here
Evaluate test page Click Here
Align the Cartridges: Press setup-Press 5, then press 2
If you the work around options are not acceptable the 8600 model would most certainly meet your needs when compared with this unit. However I encourage you to contact HP to see what upgrade options are available for this unit. It will most likely be another Photosmart model/type unit, but in many cases upgrades are offered at a discounted rate to our valued out of warranty customers. Global contact information can be accessed Here.
P.S. If you upgrade through technical support, be sure to ask about carepacks. Extended warranties may also be available at a discounted rate for upgrading.
Hope this helps!
Also, remember a click on the Kudos star to the left is a quick "Thanks" for a helpful post.
Please select the "Accept as Solution" button on the post that best answers your question.
I appreciate your input !
Thank You,
I work for HP.

Paper Jam for HP PSC 1610 All-in-One Printer

Paper Jam for HP PSC 1610 All-in-One Printer:
I had a paper jam and cleared the paper from the printer. Now every time I turn the printer "on" it picks up the top piece of paper from the tray and runs it about ½ to ¾ of the way thru the paper feed, stops, and then displays message "paper jam clear paper and then press OK". When I do that it simply picks up the next piece of paper off the tray and does the message again. If I push the OK button on the printer it will simply finish the ejection and then pick up the next paper from the tray, and do the same thing. I have examined the interior (and exterior) of the printer for paper scraps and any other obvious sign of trouble (dirty drive wheels, missing rollers, broken springs, etc...) and can not see anything unusual. I can not print a test print because of the paper jam message. I am running Windows XP and the printer has been working fine for months (until this recent jam). I did all the steps from the HP fix it site including clean rollers, plug and unplugged, carriage travel OK and more. Don't know what to do now........Any help would be great!!!! Thank you!

Hi my printer psc 1610 hp not picking paper

Paper feed out of sync on HP PSC 1510 All-in-One Printer Scanner

Paper feed out of sync on HP PSC 1510 All-in-One(SN MY59SD224W0498). Goes to flashing orange light. With Vista Home Premium 32-bit, 6.0.6002 Service Pack 2 Build 6002. USB connection to HP Pavilion GU658AA-ABU a6250.uk .
After cleaning ink drip tray including removing & refitting the small panel in the base towards the rear RHS of the printer and also Super Glueing a small wedge of timber to close split shaft bearing for rear print feed rollers - looking from rear with clean out door removed this is at the LHS where the cogs are - paper feed is out of sync. When turned on with paper in feed tray printer draws in paper until about 2" (5cm) of paper protrudes from delivery slot & then stops. Paper jam is indicated by flashing orange light. On pressing Cancel/Resume, paper is expelled & another sheet taken in with the same results. Have turned off & restarted. Have moved cartridge cleaner tray right from front to rear & tested & then brought it right forward again & tested. Have turned off & unplugged power & USB & restarted after more than 30 minutes. Have uninstalled driver & downloaded & installed anew. Downloaded & ran the HP Print Diagnostic Utility. All to no avail. Any suggestions anyone?

Hi there nobster,
This article should cover the blinking light. However, I suspect the printer requires servicing.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Hp psc 1315 all-in-one printer

I have installed a hp psc 1315 all in one printer on my new Mac OS X version 10.9.5.
While I can print without any problems, I don't have access to scan a document from the printer to my computer.
Can anyone help with this?
Thank you.

Hello @annlf
Welcome to the HP Community!
I hope to help you with the scanning concern you have today.
Unfortunately, you will not be able to scan using HP software with your PSC 1315 (older model), on Mavericks (newer OS X), as there is no Full Feature driver (includes scanning software) available.
However, you do have some other options to scan. See this link for your options. Scroll down when the guide loads and select "How do I scan with the driver from Apple Software Update?"
OS X v10.9 Mavericks: Installing and Using the Printer on a Mac
Have a wonderful Wednesday
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

HP psc 1210 all-in-one printer and Mac OS 10.9 (Mavericks)

I just installed the new OS X (Mavericks) on my mac yesterday, and now my printer, an old but reliable HP psc 1210 all-in-one, will not install. I was previously running OS 10.6 (Snow Leopord) and had no problems with the printer. Is there anything I can do to install my printer on the new OS? My computer doesn't even recognize that there is a printer connected via USB when I try to install it... is there anything I can do?

Hello,
Here is a link to a support document on hp.com on how to install on OS X Mavericks.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03967522&tmp_track_link=ot_faqs/top_issues/en_u...
Let me know if this was usefull by clicking on the Kudos button.
I work for HP.
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
Click the KUDOS STAR on the left to say “Thanks” for helping!

Installing HP PSC 1350 all-in-one printer/scanner

In the past, I could usually solve the "Offline" or "Not Connected" problems by unplugging my printer for a few minutes, but that no longer works. So, I decided to buy another one. However, just before clicking on the BUY button on Amazon, I decided to try to fix the problem one more time. Part of the "fix" was deleting my printer from the computer and then reinstalling it. This is where I'm now stuck. I deleted it, but I can't reinstall it. I get to the ADD window, but everything is grayed out. So, how do I install my printer? I might add that the HP instructions that I was following (OSX v. 10.9 Mavericks- Installing and using the printer on a Mac) are what got me this far.

Have you installed the v10.9 Mavericks compatible driver yet >> Software & driver downloads HP PSC 1350 All-in-One Printer | HP® Support
After you download the driver, open System Preferences > Printer & Scanners > Print
Delete the current printer by selecting it then click - (minus)
Then click + to add the printer back in.
That should load the driver for you.

HP PSC 1210 All-in-One Printer -- need Software (scanner directory), for windows 7 (64) bit

hi,
I am kind of done with this Printer ! lost hope in customer care and support hit with HP ! from Past 10 days searching a software to scan few doc from my printer 1210 (HP PSC 1210 All-in-One Printer) but i dint find.... i got one from some source (166 Mb) file, but to my surprise its not compatable with Windows 7. i am totally depressed now.... Please help me to find software for this (scanner document) I have lost the CD lont time back can i download This some where?

Hi there,
I understand you're looking for drivers for your PSC 1210 on Windows 7. I will certainly do my best to guide you in this issue.
At this time there are no HP drivers available for this printer for Windows 7. You can still use the printer with Windows 7, you will just have to use the drivers available within Windows 7. That document will walk you through what you need to do in order to get printing again, and will also show you how to scan with this Windows driver.
Hope this helps, have a great day!!
Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
**MissTeriLynn**
I work on behalf of HP

Scanning in win 8.1 for HP psc 2355 all-in-one

I can't get my HP psc 2355v all-in-one to scan. The printer tells me to install HP software for this feature when I try to start scan from the printer. I have installed the drivers multiple times and cannot find a way to execute the scan from my computer.

Welcome to the HP Community @bleubeck ,
I read about how you are having troubles with scanning to your Windows 8.1 system from your PSC 2355 printer, and I wanted to reach out. There are no drivers or software available to install with this specific printer model on Windows 8.1, as the model is older and OS is newer. I would think that your best bet would be to try running the Print and Scan Doctor to see if the diagnostic tool can detect the printer and scan. If this does not work, you can also try scanning from Microsoft Paint as a work around option.
If all else fails, you can contact HP directly and discuss your printer options to upgrade to a new printer compatible with Windows 8.1.
Reach our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
Good luck, and thanks for visiting the HP Forums!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

HP PSC 1410 All in One HANG INDEFINITELY with Remote Downlevel Document

Hi, after a few days of setting up my PSC 1410 All In One Printer, which is hooked up to a Compaq Presario V3000 running on Windows XP SP3 with AMD Turion 64x2 processor; and shared print to a Sony Vaio VGN FW33G, and a Mac Pro running on Snow Leopard OS X 10.6
Just yesterday, my printer was jammed with a "Remote Downlevel Document" which I can't remove after using these methods I've researched:
1. "Right Click and Cancel" x [indefinite] times
2. "Right Click and Refresh" x [indefinite] times
3. "Restart" x [indefinite] times
4. "Restart" with printer hooked on/off to the USB x [indefinite] times + [indefinite] combinations of whichever comes first
5. "Unhook USB and Click Start>Run "net stop spooler" and Rehook USB and Click Start>Run "net start spooler" x [indefinite] times
6. Did virus scan for suspicious virus using Anti Vir
7. And in between, combinations of the above x [indefinite] times
8. Search on the internet which obviously there's no real solution
Please help.
Regards,
Bobby

Am (attempting) to print direct from my MacBook - admittedly I did not install any printer drivers during the Leopard (clean) install and am a bit confused as to whether I'm now using the right one, but from what I can gather from the threads like this now littering this forum it wouldn't have made much of a difference. I had infact presumed my problem was just that - that I hadn't the right driver.
Like I hinted at previous; I can reconnect the HP to my old G4 running Tiger and print with no trouble whatsoever.
Trying to print from Leopard brings up the print dialog, and subsequent utility as it should but then nothing - as if the MacBook's not talking with the HP (though it happily recognises it as being there and what model it is etc.).
I have not yet attempted to print over the network, mainly because I couldn't succeed as is. Or tried to scan as it happens (I hardly ever use the built in scanner as I have a better one and the PSC is my backup - I scan a lot in my job).

HP PSC 1410 All In One, have driver problems...............................

I have an HP PSC 1410 All in one printer that I cannot print items from my computer on. When I try to print something from my computer my computer tells me that no driver for the printer is detcted but when I open "MY COMPUTER" and click Devices, it shows the printer listed as operational and that it is functioning properly.

I tried installing the driver and couldn't so I called HP and found out the printer is obsolete and no drivers are available........ they don't support that model anymore , So I'm screwed................

HP PSC 2355p All-In-One.

Similar Messages

Maybe you are looking for