HP PSC1610 won't print from internet. Error message says connect computer.

When trying to print from the internet my printer start to accept the paper, but then spits it out with nothing on it. I looked at the help menu and an ERROR message said "no connection; connect computer or install device software. This has never happened in the past until I installed new ink cartridges. I unplugged and disconnected the printer then reconnected, etc. Same problem. Then I uninstalled and reinstalled the printer. Installation successful, showed connection to computer, but failed to print document. The error message is the same. Help! Thanks Xara
I

Actually this is an addendum to the above. the computer used to send the command to the printer uses Windows XP. When the command is sent the printer goes into warm up mode for 2-3 seconds and I hear the parts moving before it spits the blank paper out and aborts. The printer queue is empty on my XP as if the job was finished. Thanks Xara

Similar Messages

My epson stylus SX235W has all of a sudden decided it won't print from my mac. it says rastertoescpII has unexpectedly quit. what is this and how do i get it to print from my mac again?

my epson stylus SX235W has all of a sudden decided it won't print from my mac. it says rastertoescpII has unexpectedly quit. what is this and how do i get it to print from my mac again?

Open the Sharing pane in System Preferences. If the Computer Name is not set, enter a name. You may first have to click the lock icon in the lower left corner and authenticate to unlock the settings.
Credit for this solution to ASC user Yuengdog1983.

I am unable to receive or send email from my IPAD. The error message says "Connection to server failed". Help!! geandreamer44

I am unable to receive or send email from my IPAD. The error message says "Connection to server failed". Help!! geandreamer44

Reset the device:
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings
If that doesn't help, tap Settings > General > Reset > Reset Network Settings
You will have to re enter your Wi-Fi password.
If nothing above helped, restart your router.
No data is lost due to a reset.

I am unable to download from the APP store. I get an error message saying my computer is not verified and click support under quick links..

I am unable to download from the APP store. I get an error message saying my computer is not verified and click support under quick links..

Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US

I can't download iTunes to my vista computer. Error message says that computer is not connected to internet, when it is.

I can't download iTunes to my vista computer. Error message says that computer is not connected to internet, when is is. Firewall allows iTunes.

This is a common issue, temporarily disable the Anti-Virus and Firewall software on the laptop.

Why is Adobe website refusing to validate my Adobe Acrobat package ? The error messages says: "Your computer seems to be offline. An Internet connection is required . Please connect to the internet and try again". My computer is already online. it says

Why is Adobe website refusing to validate my Adobe Acrobat package ? The error messages says: "Your computer seems to be offline. An Internet connection is required . Please connect to the internet and try again". My computer is already online. it says this each time I try to validate my package.

Hi justuser,
Please try the steps mentioned in the 'Troubleshoot connectivity issues' section of the KB: Sign in, activation, or connection errors | CS5.5 and later
Regards,
Rave

MacBook Air will not boot. Error Message says "Your Computer restarted because of a problem."

MacBook Air will not boot. Error Message says "Your Computer restarted because of a problem."

If you can't start up and log in in the usual way, try in safe mode.
During startup, you’ll see a progress bar, and then the login screen, which appears even if you normally log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Log in as an administrator to carry out these instructions. If you have only one account, you are the administrator.
If you don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
Safe mode is slower than normal, and some things won’t work at all.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t start in safe mode.
If you're able to log in, launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A panic report has a name that begins with "Kernel" and ends in ".panic". Select the most recent one. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
If you don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report.

IPod won't restore...error message saying "Can't mount iPod"...

I have determined that I need to restore my iPod based on my problem (I manually update playlists and cannot add a playlist because I get an error message saying "The disk cannot be read from or written to.") So I open iPod updater 11-17-2005 to try to restore my iPod and I get an error message saying "Can't mount iPod". I can't restore or update my iPod because of this error message. Can anyone help me? I've been all through the discussions, online help, etc., and can't find this particular error message. Thanks!!

I came to charge my iPod because the battery went low, after few minutes it came on with this do not disconnect, i tried to restore it also says can't mount, it has been exactly two days. I disconnected the iPod and the backlight and the message did not go off until the battery ran out. I also need some help my address is [email protected] Seriously I just got my iPod click wheel 30Gb color display, video, photo.

HP Officejet6210-All-in-One Won't print from Internet

I have a Verizon DSL Modem. A Dell desktop (approx. 5 years old) with Windows XP. The printer works fine when printing documents from MS Word or other non-Internet programs. However, I can't print anything from the Internet i.e. Map Quest Directions etc. I called my phone company and they said it was an HP problem. I contacted HP. They no longer offer phone support but directed me to this website.
Can anyone help me?

does the pritner show up in the printers list when you try to print? do you get any error messages when you try to print? and what version of Internet Explorer are you using?
Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"
I am an ex-HP Employee.

Officejet Pro 8500 A909g Wireless suddenly won't print yellow; no error messages

Is it possible that a printhead needs to be replaced even when Diagnostics Pages all say "Printhead health: Good"? I don't have any error messages. There are no obvious white lines through the colored blocks on test pages. In a couple of blocks on some test pages, there is one, very fine, barely visible line, but it's not the same on all pages. (Today I've printed about a dozen test pages of three different kinds that have colored blocks on them, and there are no white lines like the ones shown in examples of bad test results.) I have used the tool for cleaning the printheads many, many times today and have cleaned at all of the levels. The ink level in the yellow cartridge is fine, and it's been working well until yesterday and today.
The printing of the five colored blocks on test pages is good, bright, and clear. The only problem is that the block which is supposed to be a light orange color is only pink, and the block that is supposed to be green is only blue: they are lacking yellow ink.
I haven't had any problems with the paper I've bought at Staples for six years (I also bought my printer at Staples ). The printer is six years old but has not been used hard. I use it regularly for a page or two a few times a week, so the printer isn't sitting idle for weeks at a time.
I read something in "help" information about using a straight pin to gently remove excess adhesive from the nozzle of a new ink cartridge, which didn't apply to my cartridge, but I decided to experiment anyway by pushing a pin through the nozzle of the partially-used, yellow ink cartridge, The test page I printed after that is the page with just four colored blocks on it rather than the five blocks on a different test page. This is the only time in two days that the yellow ink has printed. However, it printed in a wide horizontal band a little streaked with gray in the middle of the block. Then there are fairly wide white bands (no ink) both above and below the wide yellow/gray streaked band in the middle, and there are very narrow, yellow, horizontal strips printed along the very top edge and the very bottom edge of the block. In other words, the sequence of horizontal printing in this block only is: narrow yellow strip, wide white band, very wide yellow/gray streaked band, wide white band, and narrow yellow strip.
It seems this might mean that some yellow ink actually got through after I'd poked the pin into the center of the nozzle of the partially-used ink cartridge? However, when I tried printing the same test page again, there was no color, no ink showing at all where the partially-printed, yellow block had been on the previous test page. There was only a totally blank, white space where the yellow test block was supposed to be. The blue block, the red/pink block, and the black/gray block all printed well.
When nothing solved the problem of yellow ink not printing, I replaced the partially-used, yellow cartridge with a new yellow cartridge, but that didn't make a difference either: the yellow ink is still not printing. Yes, I use genuine HP ink cartridges. I buy new ones whenever I need them -- never refill them or use any other brand but HP.
I used the alignment tool once to fix some slight wavering in the lines on a test page. The lines are now perfectly straight.
I apologize for being so wordy, but I wanted to send all of the details that might help diagnose the problem. I read other questions and answers in the forum about yellow ink not printing, but while there were some similiarities, none of them was 100% exactly like my experience with the problem. What shall I try now? Thank you for any suggestions.

Good day.
Can try the steps in this document?
http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/docDisplay?javax.portlet.begCache...
Although I am an HP employee, I am speaking for myself and not for HP.
Say "Thanks" by clicking the thumbs up in the post that helped you.

Hp officejet 4500 wireless won't print from laptop. It is connected to laptop.It prints from desktop

We have a HP Officejet 4500 wireless printer which was first installed in 2011 without any problems. We also utilize a HP LaserJet P1006 printer (not wireless) with our network. I cannot print from my laptop to either printer, but hubby's desktop has no problem. Both printers stopped working for my laptop at the same time. Everything worked perfectly until a few weeks ago when I could no longer print directly from my Dell Inspiron laptop. When I check on the connectivity of both printers to my laptop, the information tells me the printers are connected to my laptop.
My husband has a Dell desktop (our main computer).
I have tried everything I know to fix this problem, including shutting down the desktop, my laptop, the router, and the printers (including disconnecting the printers from the desktop with the cords that connect to the printers). I have followed all instructions on how to restart the entire system...plug the router in, plug in the printers & turn them on, and lastly restart both computers.
I am not what one would call "computer savvy"; as a matter of fact, I am quite computer-challenged. If any of you can tell me in extremely-easy-to-understand language what to do, I would appreciate your help.

Hi,
Pleae download and run HP Print and Scan Doctor utility which should resolve most of printing issues.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=oj-106151-2&cc=us&dlc=en&lc=en...=
Although I am an HP employee, I am speaking for myself and not for HP.
--Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

Itunes won't load latest upgrade, error message says 'the itunes update server could not be contacted' Any ideas on how I can fix this?

I've been trying to update my version of Itunes for ages now and I keep getting an error message. When I get the automatic alerts for the upgrade this also won't work or the upgrade to Quicktime & I'm getting a bit miffed now. I've bought an iphone and as I have an old version of itunes I can't download my music to it.
Any help would be appreciated.
Thanks
Lyn

See the futher information area of Troubleshooting issues with iTunes for Windows updates for download advice and direct links if required.
tt2

Added iCloud to ipad but now iTunes won't allow downloads. Error message: cannot connect to iTunes

I can open iTunes but if I click to download any app an error message pops up stating cannot connect to iTunes please try again later. I reset my Wifi router n deleted address and reset it on ipad, iTunes password reset then updated on ipad, restarted devices and still nothing. I just added iCloud to my ipad and it may have an incompatibility problem and all my phones and iPods don't get an error message and downloading completes no problem. Please help,

Welcome to the Apple Community.
Logging into iCloud with the Apple ID you use for iTunes, won't affect iTunes in anyway.
The following article(s) may help you.
Can't connect to the iTunes Store

I did an update today to my itunes WITHOUT my ipod and now itunes won't open. The error message says it is corrupted.

I did an APPLE update today and now my itunes will not open. It give an error message of corrupted. What can I do to open it?? The message was still he same when I plugged in my ipod. This happens with almost every update. Thanks.

See Troubleshooting issues with iTunes for Windows updates. Use the steps in the second box to repair your iTunes installation. Your library should be unaffected by these steps but there is backup advice elsewhere in the user tip.
tt2

ITunes won't open from windows - error message

Every time I try to open iTunes or Quicktime from my desktop or anywhere else, this message something like this comes up: "Windows has encountered a problem and must close iTunes. Sorry for the inconvenience. Please click here to send an error report." Because of another problem on my computer, which has already been fixed, I have had to reinstall all my progams recently, including iTunes, but after installing and reinstalling a number of times yesterday, it cannot open. Other programs, like skype, are all working fine. Can someone help me figure out why my system can't open iTunes?

Have you had a look at these troubleshooting pages? They may be of some help:
iTunes for Windows: Troubleshooting unexpected quits, freezes, or launch failures
iTunes for Windows in Windows XP or Windows 2000 doesn't open after upgrading

HP PSC1610 won't print from internet. Error message says connect computer.

Similar Messages

Maybe you are looking for