HP PSC3210 changes IP adress every few days or loses IP adress.

Hi all,
There is a problem that is bothering me. With more than 10 years of PC and ome network building experience, this one's a pain in the ass. The situation is as follows. A HP Photosmart PSC3210 is connected with a network cable to a router. The router has wireless functionality and a few laptop computers running Windows 7 and/or Windows XP are the clients for the printer. This has always worked perfectly. A few months ago the ISP replaced the router and suddenly, the printer could not be found by the clients. It appeared that the printer IP adress had changed, however DHCP lease time in the router is set to Forever. I fixed the problem by changing the settings in the client PC's and everything was ok again. A few days later - same problem! It appeard now that the printer had lost the IP adress, changed to 169.xxx.xxx.xxx . Reset the network settings, problem solved.
This situation is going on for a few months now. Client PC's have all been reinstalled with OS. I even replaced the original Zyxel router with a cheap Belkin router I use as a spare. Same problem! Closer monitoring learned that when the printer receives a printing order, it drops oud of the router DHCP list and thus loses the IP adress. This makes no sense? Of course the UTP Cat5 cable from the printer to the router was replaced. Even more, I switched the clients PSC3210 with my own, identical machine! Now the clients machine works at my home for weeks without problems. And my machine works at the clients home with the same problems that I mentioned before.
I really can't get my head around this and I would appreciate any help from you guys!
Thanks a lot!
Thomas

Hello thwbaur.
Maybe you can try setting a static IP address to the printer. For this, you simply need to enter the EWS of the printer by typing its IP address in a web browser, then go to Network and set a static IP address.
Cheers!!
Wixma.
I am an HP employee.
Say thanks by clicking the Kudos star in the post.
If my reply resolved your problem, please mark it as as Accepted Solution so that it can be found easier by other people.

Similar Messages

I am losing communication to the FP-3000 every few days.

I am communicating to the FP-3000 via OPC. Every few days I lose communication to the FP-3000. The ready light has turned off. Rebooting the unit corrects the problem. Does anyone have any ideas?

It sounds like the problem of I/O module. Make sure the I/O module is firmly seated, the terminal base is firmly attached to the terminal base on its left.
You may look for bent pins on the bottom of the module or between terminal bases (don't forget power down the bank before removing terminal bases).
You can also send e-mail to "[email protected]" for further support.

My host name changes every few days, since Xmas adding a macbook its changed 6 times. Do I need to stop this? Does it cause problems with sharing between the iMac and macbook?

my host name changes every few days, since Xmas adding a macbook its changed 6 times. Do I need to stop this? Does it cause problems with sharing between the iMac and macbook?

There are several possible causes for this problem.
1. Two (or more) computers on the local network have the same Bonjour name, such as "X's-MacBook-Pro.local".
2. You have two simultaneous connections to the same local network: probably Ethernet and Wi-Fi. If applicable, disconnect the Ethernet cable or turn off Wi-Fi.
3. A Mac wakes from sleep due to network traffic. This is due to a bug in OS X that may only affect some models.
4. A device that gets its network address from the router wakes from sleep, and the address it was using before has been assigned to another device.
5. A third-party wireless router has incompatible settings or firmware. In that case, refer to the manufacturer or ISP for support. Restarting the router may help, temporarily.
6. See also this support article.
Rename the computer in the Sharing preference pane.

IPhone loses WiFi every few days

Hi. My iPhone 4S has been acting strange recently. Every few days or so my WiFi will stop working. It shows In the corner that it's connected but nothing that uses the Internet works. I go into Settings and turn WiFi off and on and it tries to connect but the wheel just spins next to the network name. Other devices in my house work fine during that time but the iPhone won't connect. Usually the only way I can get it working again is to reset my network settings on the phone.
I'm wondering if it's my router possibly? It's a Linksys WRT54G that we've had for a long time. I'm using WPA Personal. Could my router be getting too old? Ive also noticed lately that my WiFi strength goes from two to three bars quite a bit on the iPhone. I always had full bars in the past. My channel is on 11 but I tried to change it the other day which caused my Xbox to not connect so that's another reason I'm leaning toward the router being too old. But the fact that my phone can lose signal while everything else in my house is unaffected makes me feel like it could be the phone.
Any help would be appreciated!

Hi. My iPhone 4S has been acting strange recently. Every few days or so my WiFi will stop working. It shows In the corner that it's connected but nothing that uses the Internet works. I go into Settings and turn WiFi off and on and it tries to connect but the wheel just spins next to the network name. Other devices in my house work fine during that time but the iPhone won't connect. Usually the only way I can get it working again is to reset my network settings on the phone.
I'm wondering if it's my router possibly? It's a Linksys WRT54G that we've had for a long time. I'm using WPA Personal. Could my router be getting too old? Ive also noticed lately that my WiFi strength goes from two to three bars quite a bit on the iPhone. I always had full bars in the past. My channel is on 11 but I tried to change it the other day which caused my Xbox to not connect so that's another reason I'm leaning toward the router being too old. But the fact that my phone can lose signal while everything else in my house is unaffected makes me feel like it could be the phone.
Any help would be appreciated!

New AirPort Extreme w/ Time Machine disk crashes every few days

I bought an AirPort Extreme base station about a month ago. It's currently in bridge mode, connected to my U-Verse residential gateway, and has a 1 TB hard drive attached to it that I use for Time Machine backups. The drive is formatted HFS+ and both computers that connect to the AirPort are MacBooks. Every few days, usually overnight, Time Machine will stop working, saying that it cannot connect to the backup disk. If I try to access the shared disk in FInder, it times out. The Internet connection works fine and if I go into the AirPort Utility, it shows up. But if I click on "Manual Setup," it will time out. If I try to restart the router from the menu bar option, it will time out. The only way to fix it is to manually unplug the router and restart it that way. Is anyone else having a similar issue, or know how to prevent it?

Jonathan Kleinow wrote:
I bought an AirPort Extreme base station about a month ago. It's currently in bridge mode, connected to my U-Verse residential gateway, and has a 1 TB hard drive attached to it that I use for Time Machine backups.
I hate to have to tell you this, but backing-up that way is "iffy" and +*not supported by Apple.+* See Using Time Machine with an Airport Extreme Air Disk (or use the link in *User Tips* at the top of this forum).
Every few days, usually overnight, Time Machine will stop working, saying that it cannot connect to the backup disk.
Yup, that's the sort of thing that happens sometimes in this scenario.
You might be able to improve that by, of all odd things, changing some names. See #P1 in the same place.
Another possibility is the external HD going to sleep and not waking up quickly enough. Check with the maker for firmware updates or ways to adjust it's sleep (or "spin down") performance.
But if I click on "Manual Setup," it will time out. If I try to restart the router from the menu bar option, it will time out. The only way to fix it is to manually unplug the router and restart it that way. Is anyone else having a similar issue, or know how to prevent it?
That, I suspect, is a different problem (and mostly out of my area).
But this Apple article may be helpful: http://support.apple.com/kb/ht3728
Hopefully one of the networking gurus, such as Tesserax or Bob Timmons, will have more insight.

Cookies every few days makes a *.bak file and starts anew (win7-64 with FF33)

Upgraded from FF5.1 to FF33. Only problem was black screen, fixed with hardware switch. Cookies are somehow storing a backup file every few days, and starting new file. Checked cookie settings and same as used in FF5.1
Last night hand purged about 2/3 of cookie file using FF33. File size didn't change (about 1534K)
Manually restored cookie BAK file twice, without problem.

Do you have security software or cleanup software that might be causing this and is cleaning out the cookies?
It is possible that the cookies.sqlite file that stores the cookies got corrupted.
*Rename (or delete) <b>cookies.sqlite</b> (cookies.sqlite.old) and delete other present cookies files like <b>cookies.sqlite-journal</b> in the Firefox profile folder in case the file cookies.sqlite got corrupted.
*http://kb.mozillazine.org/Cookies
*https://support.mozilla.org/kb/Deleting+cookies

Airport Express goes MIA every few days

I am using Windows Vista, and Airport Express to create a wireless network (it is the only wireless router, connected to a wired router). Every couple of weeks or so on average, my computer will be unable to find the network. I have found no pattern, no triggering action. Out of the blue, one day, it will not find the network. Nothing but a hard reset and going through the setup again will help (and even then, it takes 15-20 attempts before the Airport Utility finally sees the freshly reset Airport Express).
I have tried this with two different laptops. It is only the one that is used to update/setup the Airport Express that refuses to find it afterwards. Other devices will continue to be able to see and connect to network (Android phone, iPhone, iPad, etc).
This has been bothering me for at least a couple of years now. I have tried lots of different security settings, and pretty much all the options I can see. I have scoured Google and can't really find anyone else having had the same problem. It is driving me crazy.
Does anyone have any idea what might be happening? I am currently in the position where my laptop has lost the Airport Express, Airport Utility can't see it and I have to use a different wi-fi. Other devides continue to see and use the network I had created with my laptop.
This happened with Win 98, and now it is happening with Vista on a new laptop. This has happened with two different routers, two different ISPs, and on two different continents. I really want to use Airport Express for iTunes, but this will drive me mad!
Any help will be massively appreciated. Thank you.

Welcome to the discussions, Bob!
+I have an older igloo airport extreme and every few days it will drop internet connectivity+
If the problem seems to have started recently, that would be a clue that someone near you has probably setup a new wireless network that may be interfering with your signal, or there may even be a new cordless phone next door that is causing some issues.
(My neighbor...across the street...can literally knock me off the internet if he happens to walk out his front door talking on his cordless phone; something I found out only by accident one day)
The easiest potential solution, without downloading utilities to try to identify other networks near you, is to simply experiment by changing the channel on your wireless network to see if you can find some better airspace. Keep a record so you can track your changes, what works better, what doesn't, etc.
Here's how to change the channel on your wireless:
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click Manual Setup
Click the Wireless tab below the row of icons
The Channel setting is on this page
Click Update to save your changes and the Airport Extreme will take about 20-25 seconds to restart again.
Maybe start on the high channel...11 and try that first, then work down from there as the lower channels 1 tend to be more crowded, but there are no hard and fast rules.
Hopefully, there are not too many networks around you and you'll be able to find the "right" channel.

My Timecapsule Stops Working every few days!

I have a 2TB Timecapsule that has worked flawlessly for about 18 months. Over the last month it has stopped working every few days. When I say it stops working the wirless networks go off and the wired router stops. The lights are green on the back where the cables connect and on front I have a green status light. But the devices stops functioning. I pull the power and wait a little while and plug it back in and everything works again for a few days (could be a week) could be 2-3 days.
It is running the latest firmware and I haven't changed its configuration in many months.
No idea what to do... Any sugestions?
Joe

The lockup is across all devices??
Are any still working when the computer say is unable to connect?
It could be the latest firmware that is the problem.. that changed about 1-2months ago.
You can try doing a factory reset and a new clean setup but more than likely the issue will continue.
To go back to earlier firmware hold down the option key when you choose firmware. It will then show older as well as new versions.. Select 7.6.1 or even 7.5.2
Factory reset after the firmware and do the setup again.

I am having to reset my icloud password every few days

I have had this recurrent problem over the last 2 - 3 weeks. Every few days I find that Mail won't log in to my .mac account and tells me to reset my password. When I go to the reset page it tells me my password has been locked 'for security reasons'. I am on maybe my 5th or 6th new password in around 3 weeks, when I have not had to reset my password for over a decade previously. This is all obviously a massive pain: I am now having to use passwords I cannot readily remember, because iCloud won't let me re-use old passwords; and I am, of course, also having to change the password on my iPad and my iPhone and re-enter it for various iCloud sync'd services such as Address Book.
Can anyone please explain why this is happening and if there is anything I can do to stop it?
Thanks.

In my case I have to change the password every week.
The requested reset takes long time when I am on mobile modem with low quality connection (traveling). Have file on Desktop, where type my new password instead of the old one every reset. Do not think this is secure - but what to do...
The only guess is - Mail is checking the account every several minutes (I have it open when in office) and Apple has some limit to the number of connections before such request is issued.
I would prefer not to be bothered by this. I was using the same password from the beginning till quite recent time when this reqests started. There were no problems with security and I do not like and do not want to change password so often.
Anyone in here managed to avoid these requests? I am not using LinkedIn. Actually do not remember anything where I could put my iCloud password even once (especially to put it each week after weekly reset) - except iCloud itself...
Or are there just 5 of us with such problem - something common with the iCloud registration? I have my account since iTools/.Mac. May be they simply want me out?

HT203768 iPad air ios8 deletes mail in inbox every few days.

IiPad air ios8.1.2 deletes inbox email every few days.

Some where along the lne the Mail app changed from hom many emails you could keep to the lenght of sync, it's been this way at least since IOS 6. It's normal, to free up room on your iPad. Remember just because a email auto-deletes it's not gone, it's just not on your iPad. You can go to your email account onlne to see how many email you have. You can also use the search field if you also know the name. if you live near an Apple Store it might be a good time to stop in and find out why you don't have the option to change the sync amount.

Late 2012 iMac Freezes every few days

My iMac has been in the Apple Store for a week with the Geniuses and they came back saying they couldn't find anything so putting this out to this community in the hope someone else can help. Here are the details.
Model: 21.5 inch Late-2012 iMac
RAM: 8Gb
Processor: 2.9Ghz Intel Core i5
Graphics: NVIDIA GeForce GT 650M 512 MB
Hard Drive: 1.12 Tb Fusion (653Gb free)
OS: 10.8.4
Software: Fairly vanilla with no MS or Adobe Apps. No system extensions or hacks installed.
Symptom: Every few days or so the iMac locks up. Certain running applications will still work but many common ones such as Pages, Aperture, App Store & TextEdit will hang when trying to open. Force Quitting them doesn't affect them. When I try to shut down the computer it goes to the grey screen and stays there. Eventually the power needs to be turned off to reboot it. This has been doing this for the last several months.
Solutions Tried:
- Fixed permissions
- Reset PRAM
- Re-install OS X
I can't replicate the crash but today it happened again. At around 3:50pm I went to the iMac and noticed that Pages wouldn't load. Force quitting the App didn't do anything. Aperture was not responding so force quit that. Still wouldn't re-open. Mail was working fine and I was able to send a test message. Safari worked fine. Launched System Preferences ok but could not launch TextEdit or App Store. Calendar opened and closed fine. Attempted to restart the Mac but got the grey screen and after 5 minutes of waiting turned the computer off & relaunched it.
Here is a snapshot of some Console entries:
5/09/13 2:27:41.316 PM coreaudiod[122]: Enabled automatic stack shots because audio IO is inactive
5/09/13 2:28:16.449 PM coreaudiod[122]: Disabled automatic stack shots because audio IO is active
5/09/13 2:28:17.262 PM coreaudiod[122]: Enabled automatic stack shots because audio IO is inactive
5/09/13 2:28:50.579 PM com.apple.usbmuxd[68]: _heartbeat_failed heartbeat detected detach for device 0xdf3-10.0.1.10:0!
5/09/13 2:37:54.690 PM com.apple.usbmuxd[68]: _heartbeat_failed heartbeat detected detach for device 0xdfc-10.0.1.10:0!
5/09/13 2:42:04.656 PM lsboxd[209]: @AE relay 61657674:6f646f63
5/09/13 2:47:21.156 PM com.apple.usbmuxd[68]: _heartbeat_failed heartbeat detected detach for device 0xe05-10.0.1.11:0!
5/09/13 4:03:23.428 PM com.apple.launchd[1]: *** launchd[1] has started up. ***
5/09/13 4:03:23.428 PM com.apple.launchd[1]: *** Shutdown logging is enabled. ***
5/09/13 4:03:24.934 PM com.apple.launchd[1]: (com.apple.automountd) Unknown key for boolean: NSSupportsSuddenTermination
5/09/13 4:03:26.157 PM airportd[30]: _processDLILEvent: en1 attached (down)
5/09/13 4:03:26.342 PM UserEventAgent[11]: Captive: [HandleNetworkInformationChanged:2435] nwi_state_copy returned NULL
5/09/13 4:03:26.609 PM fseventsd[39]: event logs in /.fseventsd out of sync with volume. destroying old logs. (419745 5 419906)
5/09/13 4:03:26.612 PM fseventsd[39]: log dir: /.fseventsd getting new uuid: A3689432-84D2-4FB0-8C25-0352BC004F8B
5/09/13 4:03:26.666 PM mDNSResponder[40]: mDNSResponder mDNSResponder-379.38.1 (Apr 25 2013 19:19:56) starting OSXVers 12
Notice that the last Console entry was at 2:47pm (in red) and then nothing. I went to use the computer at 3:50pm and did several actions on it. Plugged in iPad, opened iTunes. Copied a file from the iPad to the desktop. Prior to that it hadn't been used for several hours. The shutdown that I selected does not appear in the log (although it only managed to go to the grey screen rather than complete a full shut down).
Appreciate any clues at all here. This is very frustrating and has been going on for far too long.
TIA. Jordan

Back up all data immediately as your boot drive may be failing.
If you have more than one user account, these instructions must be carried out as an administrator.
Triple-click anywhere in the line below on this page to select it:
syslog -k Sender kernel -k Message CReq 'Channel t|GPU D|I/O|Previous Sh' | tail | open -ef
Copy the selected text to the Clipboard (command-C).
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V).
The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
A TextEdit window will open with the output of the command. If the command produced no output, the window will be empty. Post the contents of the TextEdit window (not the Terminal window), if any — the text, please, not a screenshot. The title of the window doesn't matter, and you don't need to post that.

I need to share a file with sec.(windows based). She uses it all the time. I need to just download updated version every few days. I have an old airport extreme and was hoping to attach an external drive. Will this work?

I need to download an updated version of a file every few days to use. My secretary works on the file all the time. I thought i could use my old airport extreme and attach an external HD and set up a network to do just this. At work we alll use pc's. How can i make this work? At the moment we use usb stick to transfer which is getting to be a bit of a pain as the file grows every week. Presently 5GB.

I thought i could use my old airport extreme and attach an external HD and set up a network to do just this.
Yes, you can use either the 802.11g or 802.11n AirPort Extreme Base Station (AEBS) to attach an external USB HDD for file sharing. Either AEBS model would allow you to share out this HDD to either Macs or PCs. From the PC, the shared HDD would appear as a network drive which you can map via Windows Explorer.

Does it create a problem if I only connect the backup external drive every few days for use with Time Machine? Should I have purchased Time Capsule instead?

After a near miss with my 4-year old MacBook, I finally wised up and purchased a WD My Passport for Mac to back up my hard drive. I connected the Passport today and have performed the first full backup. However, I do not wish to keep it permanently connected to the laptop. Does this create a problem if I only connect the drive every few days? Should I have purchased Time Capsule instead?

Hello,
I don't think it'll cause a problem, but I'd disable/turn off Time Machine before disconnecting, then turn it back on after you connect it again.

Smtp in Hangs for every fews days.

I am running iPlanet Messaging Server 5.2 sp1 on solaris 2.8 with kernel patch level 23 .
For every few days say for 3-4 days once smtp process stops hanging. When I do a telnet to port 25 , it just stop as "Escape character is '^]'." It is not displaying the iMS banner.
If a do a restart of services , it is ready to accept the requests.
imsimta version o/p
iPlanet Messaging Server 5.2 Patch 1 (built Aug 19 2002)
libimta.so 5.2 Patch 1 (built 23:25:07, Aug 19 2002)
Please help.
Rgds
Prem.

Hi
Please find below the truss o/p of tcp_smtp_server & dispatcher process ..
tcp_smtp_process:
lwp_sema_wait(0xFE0C1E30) (sleeping...)
signotifywait() (sleeping...)
lwp_sema_wait(0xFE111E30) (sleeping...)
poll(0xFE0F01C0, 1, -1) (sleeping...)
lwp_sema_wait(0xFE33FA08) (sleeping...)
Received signal #14, SIGALRM, in lwp_sema_wait() [caught]
lwp_sema_wait(0xFE33FA08) Err#91 ERESTART
sigprocmask(SIG_SETMASK, 0xFDE0BDE4, 0x00000000) = 0
lwp_sema_post(0xFE0C1E30) = 0
lwp_sema_wait(0xFE0C1E30) = 0
sigprocmask(SIG_SETMASK, 0xFE34AD68, 0x00000000) = 0
setcontext(0xFDE0B6C8)
sigprocmask(SIG_BLOCK, 0xFE33F9F8, 0x00000000) = 0
sigprocmask(SIG_UNBLOCK, 0xFE33F9F8, 0x00000000) = 0
time() = 1072237388
lwp_sema_post(0xFE33FA08) = 0
lwp_sema_wait(0xFE33FA08) = 0
sigprocmask(SIG_BLOCK, 0xFE33F9F8, 0x00000000) = 0
setitimer(ITIMER_REAL, 0xFDE0BC68, 0x00000000) = 0
sigprocmask(SIG_UNBLOCK, 0xFE33F9F8, 0x00000000) = 0
lwp_sema_wait(0xFE0C1E30) (sleeping...)
signotifywait() (sleeping...)
lwp_sema_wait(0xFE111E30) (sleeping...)
poll(0xFE0F01C0, 1, -1) (sleeping...)
lwp_sema_wait(0xFE33FA08) (sleeping...)
Received signal #14, SIGALRM, in lwp_sema_wait() [caught]
lwp_sema_wait(0xFE33FA08) Err#91 ERESTART
sigprocmask(SIG_SETMASK, 0xFDE0BDE4, 0x00000000) = 0
lwp_sema_post(0xFE0C1E30) = 0
lwp_sema_wait(0xFE0C1E30) = 0
sigprocmask(SIG_SETMASK, 0xFE34AD68, 0x00000000) = 0
setcontext(0xFDE0B6C8)
sigprocmask(SIG_BLOCK, 0xFE33F9F8, 0x00000000) = 0
sigprocmask(SIG_UNBLOCK, 0xFE33F9F8, 0x00000000) = 0
time() = 1072237448
lwp_sema_post(0xFE33FA08) = 0
lwp_sema_wait(0xFE33FA08) = 0
sigprocmask(SIG_BLOCK, 0xFE33F9F8, 0x00000000) = 0
setitimer(ITIMER_REAL, 0xFDE0BC68, 0x00000000) = 0
sigprocmask(SIG_UNBLOCK, 0xFE33F9F8, 0x00000000) = 0
lwp_sema_wait(0xFE0C1E30) (sleeping...)
signotifywait() (sleeping...)
lwp_sema_wait(0xFE111E30) (sleeping...)
poll(0xFE0F01C0, 1, -1) (sleeping...)
lwp_sema_wait(0xFE33FA08) (sleeping...)
Dispatcher Process
*** SGID: rgid/egid/sgid = 10 / 1 / 1 ***
accept(13, 0xFE031CE8, 0xFE031CD4, 1) (sleeping...)
signotifywait() (sleeping...)
lwp_cond_wait(0xFE7F5548, 0xFE7F5558, 0xFE7EEDB0) (sleeping...)
accept(9, 0xFE0F1C9E, 0xFE0F1C98, 1) (sleeping...)
lwp_sema_wait(0xFE7EFA08) (sleeping...)
lwp_cond_wait(0xFE7F5548, 0xFE7F5558, 0xFE7EEDB0) (sleeping...)
lwp_cond_wait(0xFE7F5548, 0xFE7F5558, 0xFE7EEDB0) (sleeping...)
lwp_cond_wait(0xFE7F5548, 0xFE7F5558, 0xFE7EEDB0) (sleeping...)
lwp_sema_wait(0xFDF0DE30) (sleeping...)
poll(0xFD530250, 1, -1) (sleeping...)
Received signal #14, SIGALRM, in lwp_sema_wait() [caught]
lwp_sema_wait(0xFE7EFA08) Err#91 ERESTART
sigprocmask(SIG_SETMASK, 0xFDE0BDE4, 0x00000000) = 0
lwp_sema_post(0xFDF0DE30) = 0
setitimer(ITIMER_REAL, 0xFDE0B730, 0x00000000) = 0
lwp_sema_wait(0xFDF0DE30) = 0
sigprocmask(SIG_SETMASK, 0xFE7FAD68, 0x00000000) = 0
setcontext(0xFDE0B6C8)
sigprocmask(SIG_BLOCK, 0xFE7EF9F8, 0x00000000) = 0
setitimer(ITIMER_REAL, 0xFDE0BC68, 0x00000000) = 0
sigprocmask(SIG_UNBLOCK, 0xFE7EF9F8, 0x00000000) = 0
fork1() = 12612
lwp_cond_wait(0xFE7F5548, 0xFE7F5558, 0xFE7EEDB0) = 0
lwp_cond_wait(0xFE7F5548, 0xFE7F5558, 0xFE7EEDB0) = 0
lwp_cond_wait(0xFE7F5548, 0xFE7F5558, 0xFE7EEDB0) = 0
lwp_cond_wait(0xFE7F5548, 0xFE7F5558, 0xFE7EEDB0) = 0
lwp_mutex_wakeup(0xFE7F5558) = 0
lwp_mutex_lock(0xFE7F5558) = 0
lwp_mutex_lock(0xFE7F5558) = 0
lwp_mutex_lock(0xFE7F5558) = 0
lwp_mutex_lock(0xFE7F5558) = 0
mmap(0x00000000, 73728, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_NORESERVE|MAP_ANON, -1, 0) = 0xFD7E0000
mprotect(0xFD7E0000, 8192, PROT_NONE) = 0
lwp_cond_signal(0xFE7F5548) = 0
lwp_cond_wait(0xFE7F5548, 0xFE7F5558, 0xFE7EEDB0) = 0
lwp_mutex_wakeup(0xFE7F5558) = 0
lwp_mutex_lock(0xFE7F5558) = 0
lwp_self() = 9
lwp_sema_post(0xFD7F1E30) = 0
lwp_sema_wait(0xFD7F1E30) = 0
lwp_mutex_wakeup(0xFE7F5558) = 0
lwp_mutex_lock(0xFE7F5558) = 0
lwp_cond_signal(0xFE7F5548) = 0
lwp_cond_wait(0xFE7F5548, 0xFE7F5558, 0xFE7EEDB0) = 0
time() = 1072237298
lwp_sema_post(0xFD7F1E30) = 0
lwp_sema_wait(0xFD7F1E30) = 0
lwp_mutex_wakeup(0xFE7F5558) = 0
lwp_mutex_lock(0xFE7F5558) = 0
lwp_mutex_wakeup(0xFE7FB1D8) = 0
lwp_mutex_lock(0xFE7FB1D8) = 0
lwp_cond_broadcast(0xFE7FB210) = 0
munmap(0xFE040000, 73728) = 0
accept(13, 0xFE031CE8, 0xFE031CD4, 1) (sleeping...)
signotifywait() (sleeping...)
lwp_cond_wait(0xFE7F5548, 0xFE7F5558, 0xFE7EEDB0) (sleeping...)
accept(9, 0xFE0F1C9E, 0xFE0F1C98, 1) (sleeping...)
lwp_sema_wait(0xFE7EFA08) (sleeping...)
lwp_cond_wait(0xFE7F5548, 0xFE7F5558, 0xFE7EEDB0) (sleeping...)
lwp_cond_wait(0xFE7F5548, 0xFE7F5558, 0xFE7EEDB0) (sleeping...)
lwp_sema_wait(0xFDF0DE30) (sleeping...)
lwp_cond_wait(0xFE7F5548, 0xFE7F5558, 0xFE7EEDB0) (sleeping...)
poll(0xFD530250, 1, -1) (sleeping...)
Received signal #14, SIGALRM, in lwp_sema_wait() [caught]
lwp_sema_wait(0xFE7EFA08) Err#91 ERESTART
sigprocmask(SIG_SETMASK, 0xFDE0BDE4, 0x00000000) = 0
lwp_sema_post(0xFDF0DE30) = 0
setitimer(ITIMER_REAL, 0xFDE0B730, 0x00000000) = 0
lwp_sema_wait(0xFDF0DE30) = 0
sigprocmask(SIG_SETMASK, 0xFE7FAD68, 0x00000000) = 0
setcontext(0xFDE0B6C8)
sigprocmask(SIG_BLOCK, 0xFE7EF9F8, 0x00000000) = 0
setitimer(ITIMER_REAL, 0xFDE0BC68, 0x00000000) = 0
sigprocmask(SIG_UNBLOCK, 0xFE7EF9F8, 0x00000000) = 0
time() = 1072237327
time() = 1072237327
time() = 1072237327
time() = 1072237327
time() = 1072237327
Received signal #14, SIGALRM, in lwp_sema_wait() [caught]
lwp_sema_wait(0xFE7EFA08) Err#91 ERESTART
sigprocmask(SIG_SETMASK, 0xFDE0BDE4, 0x00000000) = 0
lwp_sema_post(0xFE111E30) = 0
setitimer(ITIMER_REAL, 0xFDE0B730, 0x00000000) = 0
lwp_sema_wait(0xFE111E30) = 0
sigprocmask(SIG_SETMASK, 0xFE7FAD68, 0x00000000) = 0
setcontext(0xFDE0B6C8)
sigprocmask(SIG_BLOCK, 0xFE7EF9F8, 0x00000000) = 0
setitimer(ITIMER_REAL, 0xFDE0BC68, 0x00000000) = 0
sigprocmask(SIG_UNBLOCK, 0xFE7EF9F8, 0x00000000) = 0
fork1() = 12666
lwp_cond_wait(0xFE7F5548, 0xFE7F5558, 0xFE7EEDB0) = 0
lwp_cond_wait(0xFE7F5548, 0xFE7F5558, 0xFE7EEDB0) = 0
lwp_cond_wait(0xFE7F5548, 0xFE7F5558, 0xFE7EEDB0) = 0
lwp_cond_wait(0xFE7F5548, 0xFE7F5558, 0xFE7EEDB0) = 0
lwp_mutex_wakeup(0xFE7F5558) = 0
lwp_mutex_lock(0xFE7F5558) = 0
lwp_mutex_lock(0xFE7F5558) = 0
lwp_mutex_lock(0xFE7F5558) = 0
lwp_mutex_lock(0xFE7F5558) = 0
mmap(0x00000000, 73728, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_NORESERVE|MAP_ANON, -1, 0) = 0xFE040000
mprotect(0xFE040000, 8192, PROT_NONE) = 0
lwp_cond_signal(0xFE7F5548) = 0
lwp_cond_wait(0xFE7F5548, 0xFE7F5558, 0xFE7EEDB0) = 0
lwp_mutex_wakeup(0xFE7F5558) = 0
lwp_mutex_lock(0xFE7F5558) = 0
lwp_self() = 10
lwp_sema_post(0xFE051E30) = 0
lwp_sema_wait(0xFE051E30) = 0
lwp_mutex_wakeup(0xFE7F5558) = 0
lwp_mutex_lock(0xFE7F5558) = 0
lwp_cond_signal(0xFE7F5548) = 0
lwp_cond_wait(0xFE7F5548, 0xFE7F5558, 0xFE7EEDB0) = 0
time() = 1072237328
lwp_sema_post(0xFE7EFA08) = 0
lwp_sema_wait(0xFE7EFA08) = 0
sigprocmask(SIG_BLOCK, 0xFE7EF9F8, 0x00000000) = 0
setitimer(ITIMER_REAL, 0xFDE0BC68, 0x00000000) = 0
sigprocmask(SIG_UNBLOCK, 0xFE7EF9F8, 0x00000000) = 0
lwp_sema_post(0xFE051E30) = 0
lwp_sema_wait(0xFE051E30) = 0
lwp_mutex_wakeup(0xFE7F5558) = 0
lwp_mutex_lock(0xFE7F5558) = 0
lwp_mutex_wakeup(0xFE7FB1D8) = 0
lwp_mutex_lock(0xFE7FB1D8) = 0
lwp_cond_broadcast(0xFE7FB210) = 0
munmap(0xFD7E0000, 73728) = 0
accept(13, 0xFE031CE8, 0xFE031CD4, 1) (sleeping...)
signotifywait() (sleeping...)
lwp_cond_wait(0xFE7F5548, 0xFE7F5558, 0xFE7EEDB0) (sleeping...)
accept(9, 0xFE0F1C9E, 0xFE0F1C98, 1) (sleeping...)
lwp_sema_wait(0xFE7EFA08) (sleeping...)
lwp_cond_wait(0xFE7F5548, 0xFE7F5558, 0xFE7EEDB0) (sleeping...)
lwp_cond_wait(0xFE7F5548, 0xFE7F5558, 0xFE7EEDB0) (sleeping...)
lwp_cond_wait(0xFE7F5548, 0xFE7F5558, 0xFE7EEDB0) (sleeping...)
lwp_sema_wait(0xFDF0DE30) (sleeping...)
poll(0xFD530250, 1, -1) (sleeping...)
Received signal #14, SIGALRM, in lwp_sema_wait() [caught]
lwp_sema_wait(0xFE7EFA08) Err#91 ERESTART
sigprocmask(SIG_SETMASK, 0xFDE0BDE4, 0x00000000) = 0
lwp_sema_post(0xFDF0DE30) = 0
setitimer(ITIMER_REAL, 0xFDE0B730, 0x00000000) = 0
lwp_sema_wait(0xFDF0DE30) = 0
sigprocmask(SIG_SETMASK, 0xFE7FAD68, 0x00000000) = 0
setcontext(0xFDE0B6C8)
sigprocmask(SIG_BLOCK, 0xFE7EF9F8, 0x00000000) = 0
setitimer(ITIMER_REAL, 0xFDE0BC68, 0x00000000) = 0
sigprocmask(SIG_UNBLOCK, 0xFE7EF9F8, 0x00000000) = 0
fork1() = 12673
lwp_cond_wait(0xFE7F5548, 0xFE7F5558, 0xFE7EEDB0) = 0
lwp_cond_wait(0xFE7F5548, 0xFE7F5558, 0xFE7EEDB0) = 0
lwp_cond_wait(0xFE7F5548, 0xFE7F5558, 0xFE7EEDB0) = 0
lwp_cond_wait(0xFE7F5548, 0xFE7F5558, 0xFE7EEDB0) = 0
lwp_mutex_wakeup(0xFE7F5558) = 0
lwp_mutex_lock(0xFE7F5558) = 0
lwp_mutex_lock(0xFE7F5558) = 0
lwp_mutex_lock(0xFE7F5558) = 0
lwp_mutex_lock(0xFE7F5558) = 0
mmap(0x00000000, 73728, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_NORESERVE|MAP_ANON, -1, 0) = 0xFD7E0000
mprotect(0xFD7E0000, 8192, PROT_NONE) = 0
lwp_cond_signal(0xFE7F5548) = 0
lwp_cond_wait(0xFE7F5548, 0xFE7F5558, 0xFE7EEDB0) = 0
lwp_mutex_wakeup(0xFE7F5558) = 0
lwp_mutex_lock(0xFE7F5558) = 0
lwp_self() = 9
lwp_sema_post(0xFD7F1E30) = 0
lwp_sema_wait(0xFD7F1E30) = 0
lwp_mutex_wakeup(0xFE7F5558) = 0
lwp_mutex_lock(0xFE7F5558) = 0
lwp_cond_signal(0xFE7F5548) = 0
lwp_cond_wait(0xFE7F5548, 0xFE7F5558, 0xFE7EEDB0) = 0
time() = 1072237358
lwp_sema_post(0xFD7F1E30) = 0
lwp_sema_wait(0xFD7F1E30) = 0
lwp_mutex_wakeup(0xFE7F5558) = 0
lwp_mutex_lock(0xFE7F5558) = 0
lwp_mutex_wakeup(0xFE7FB1D8) = 0
lwp_mutex_lock(0xFE7FB1D8) = 0
lwp_cond_broadcast(0xFE7FB210) = 0
munmap(0xFE040000, 73728) = 0
accept(13, 0xFE031CE8, 0xFE031CD4, 1) (sleeping...)
signotifywait() (sleeping...)
lwp_cond_wait(0xFE7F5548, 0xFE7F5558, 0xFE7EEDB0) (sleeping...)
accept(9, 0xFE0F1C9E, 0xFE0F1C98, 1) (sleeping...)
lwp_sema_wait(0xFE7EFA08) (sleeping...)
lwp_cond_wait(0xFE7F5548, 0xFE7F5558, 0xFE7EEDB0) (sleeping...)
lwp_cond_wait(0xFE7F5548, 0xFE7F5558, 0xFE7EEDB0) (sleeping...)
lwp_sema_wait(0xFDF0DE30) (sleeping...)
lwp_cond_wait(0xFE7F5548, 0xFE7F5558, 0xFE7EEDB0) (sleeping...)
poll(0xFD530250, 1, -1) (sleeping...)
Received signal #14, SIGALRM, in lwp_sema_wait() [caught]
lwp_sema_wait(0xFE7EFA08) Err#91 ERESTART
sigprocmask(SIG_SETMASK, 0xFDE0BDE4, 0x00000000) = 0
lwp_sema_post(0xFDF0DE30) = 0
setitimer(ITIMER_REAL, 0xFDE0B730, 0x00000000) = 0
lwp_sema_wait(0xFDF0DE30) = 0
sigprocmask(SIG_SETMASK, 0xFE7FAD68, 0x00000000) = 0
setcontext(0xFDE0B6C8)
sigprocmask(SIG_BLOCK, 0xFE7EF9F8, 0x00000000) = 0
setitimer(ITIMER_REAL, 0xFDE0BC68, 0x00000000) = 0
sigprocmask(SIG_UNBLOCK, 0xFE7EF9F8, 0x00000000) = 0
time() = 1072237387
time() = 1072237387
time() = 1072237387
time() = 1072237387
time() = 1072237387
Received signal #14, SIGALRM, in lwp_sema_wait() [caught]
lwp_sema_wait(0xFE7EFA08) Err#91 ERESTART
sigprocmask(SIG_SETMASK, 0xFDE0BDE4, 0x00000000) = 0
lwp_sema_post(0xFE111E30) = 0
setitimer(ITIMER_REAL, 0xFDE0B730, 0x00000000) = 0
lwp_sema_wait(0xFE111E30) = 0
sigprocmask(SIG_SETMASK, 0xFE7FAD68, 0x00000000) = 0
setcontext(0xFDE0B6C8)
sigprocmask(SIG_BLOCK, 0xFE7EF9F8, 0x00000000) = 0
setitimer(ITIMER_REAL, 0xFDE0BC68, 0x00000000) = 0
sigprocmask(SIG_UNBLOCK, 0xFE7EF9F8, 0x00000000) = 0
fork1() = 12680
lwp_cond_wait(0xFE7F5548, 0xFE7F5558, 0xFE7EEDB0) = 0
lwp_cond_wait(0xFE7F5548, 0xFE7F5558, 0xFE7EEDB0) = 0
lwp_cond_wait(0xFE7F5548, 0xFE7F5558, 0xFE7EEDB0) = 0
lwp_cond_wait(0xFE7F5548, 0xFE7F5558, 0xFE7EEDB0) = 0
lwp_mutex_wakeup(0xFE7F5558) = 0
lwp_mutex_lock(0xFE7F5558) = 0
lwp_mutex_lock(0xFE7F5558) = 0
lwp_mutex_lock(0xFE7F5558) = 0
lwp_mutex_lock(0xFE7F5558) = 0
mmap(0x00000000, 73728, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_NORESERVE|MAP_ANON, -1, 0) = 0xFE040000
mprotect(0xFE040000, 8192, PROT_NONE) = 0
lwp_cond_signal(0xFE7F5548) = 0
lwp_cond_wait(0xFE7F5548, 0xFE7F5558, 0xFE7EEDB0) = 0
lwp_mutex_wakeup(0xFE7F5558) = 0
lwp_mutex_lock(0xFE7F5558) = 0
lwp_self() = 10
lwp_sema_post(0xFE051E30) = 0
lwp_sema_wait(0xFE051E30) = 0
lwp_mutex_wakeup(0xFE7F5558) = 0
lwp_mutex_lock(0xFE7F5558) = 0
lwp_cond_signal(0xFE7F5548) = 0
lwp_cond_wait(0xFE7F5548, 0xFE7F5558, 0xFE7EEDB0) = 0
time() = 1072237388
lwp_sema_post(0xFE7EFA08) = 0
lwp_sema_wait(0xFE7EFA08) = 0
sigprocmask(SIG_BLOCK, 0xFE7EF9F8, 0x00000000) = 0
setitimer(ITIMER_REAL, 0xFDE0BC68, 0x00000000) = 0
sigprocmask(SIG_UNBLOCK, 0xFE7EF9F8, 0x00000000) = 0
lwp_sema_post(0xFE051E30) = 0
lwp_sema_wait(0xFE051E30) = 0
lwp_mutex_wakeup(0xFE7F5558) = 0
lwp_mutex_lock(0xFE7F5558) = 0
lwp_mutex_wakeup(0xFE7FB1D8) = 0
lwp_mutex_lock(0xFE7FB1D8) = 0
lwp_cond_broadcast(0xFE7FB210) = 0
munmap(0xFD7E0000, 73728) = 0
accept(13, 0xFE031CE8, 0xFE031CD4, 1) (sleeping...)
signotifywait() (sleeping...)
lwp_cond_wait(0xFE7F5548, 0xFE7F5558, 0xFE7EEDB0) (sleeping...)
accept(9, 0xFE0F1C9E, 0xFE0F1C98, 1) (sleeping...)
lwp_sema_wait(0xFE7EFA08) (sleeping...)
lwp_cond_wait(0xFE7F5548, 0xFE7F5558, 0xFE7EEDB0) (sleeping...)
lwp_cond_wait(0xFE7F5548, 0xFE7F5558, 0xFE7EEDB0) (sleeping...)
lwp_cond_wait(0xFE7F5548, 0xFE7F5558, 0xFE7EEDB0) (sleeping...)
lwp_sema_wait(0xFDF0DE30) (sleeping...)
poll(0xFD530250, 1, -1) (sleeping...)

I have a new I phone 5c and every few days the screen icons get bigger , almost like the don't fit the screen anymore. I have to shut phone down , why is this

I have a new I phone 5c and every few days the screen icons get bigger , almost like the don't fit the screen anymore. I have to shut phone down , why is this

probably your zoom is on. try double tapping with three fingers on your screen, it should go back to normal and then goto
settings>general>accesibility>zoom and disable it

HP PSC3210 changes IP adress every few days or loses IP adress.

Similar Messages

Maybe you are looking for