HP psc750xi

I have two of these all-in-ones, one at home and one at work.  I have never had a problem until the last few months.  If I try to print from a receipt window, shopping list window or an attachment window - it will not print.  Printer makes noise only.  If I restart the computer, sometimes it will print what I was trying to print.  If I run the diagnose utility, it shows a print queue issue.  When I "fix" it, and try to print from say, Word, it seems that the communication is slowed from the computer to the printer before print starts.  If I restart the computer, then everything is fine again.  Any ideas?????

While I was reading your reply I was thinking it could be an issues with WIA, but since the camera is still working WIA would be working fine.
Will the PSC 750xi still make a copy? What is the exact error on the front of the printer when you try to scan, you have mentioned its says to turn off and on, is that all it says?
Check for a install any Windows Updates to ensure the Operating System is running at best ability. Also, type in the search bar after clicking start; change device installation settings> click the option and ensure the selection is set to on.
You could try deleting and adding the printer from Devices and Printers. To delete, right click printer and click Remove device. To add, this Microsoft document will provide the steps: Install a printer.
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Similar Messages

  • HP PSC750xi Cannot activate the scanner

    The printer is able to print and copy, however, when I try to scan from any program(wordprocessor, windows fax and scan,or from the control panel) I receive a device not ready msg or the wordprocessor does not see the device. When I try to scan from the printer, I get the error and recommend to turn printer off and then on. This does not work. I am using Windows 7 pro. The printer is hooked up with USB.

    While I was reading your reply I was thinking it could be an issues with WIA, but since the camera is still working WIA would be working fine.
    Will the PSC 750xi still make a copy? What is the exact error on the front of the printer when you try to scan, you have mentioned its says to turn off and on, is that all it says?
    Check for a install any Windows Updates to ensure the Operating System is running at best ability. Also, type in the search bar after clicking start; change device installation settings> click the option and ensure the selection is set to on.
    You could try deleting and adding the printer from Devices and Printers. To delete, right click printer and click Remove device. To add, this Microsoft document will provide the steps: Install a printer.
    JERENDS
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • My PSC750xi printer is very slow

    I have used this printer for a long time with few problems.  Of late it runs very slowly, suddenly picks up speed then slows down again.  It's like it prints a few lines then stops for a while to think about it, prints a few more then stops again, and so on.  I have read what I can on the web - replace the ink cartridge, unplug power and connection, wait 30 seconds, etc., but to no avail.  Suggestions would be appreciated.
    I run a home tower computer with XP Home SP3, lots of free RAM (2MB), lots of free memory (250GB), 1.8GHz, well maintained.

    I should have included that I run a home tower computer with XP Home SP3, lots of free RAM (2MB), lots of free memory (250GB), 1.8GHz, well maintained.

  • Scanner Failure on hp psc750xi

    I have been getting scanner failure. I have tried all that hp has to offer for solutions. No Luck.
    Any other suggestions?

    Thanks Rainbow7000 for the info 
    I did try all of these to see if it would help but with no life at all in the scanner it looked pretty terminal 
     I have therefore called HP support and I now have a replacement on its way to me!
    Have a good weekend too...........

  • Can you print four months to a page in iCal?

    Can you print four months to a page in iCal?

    Yes.
    From any application you can print multiple pages on a single page. In the Print Dialog click on Copies & Pages to open up the drop down menu, then select Layout.
    iCal defaults to one month per page, so select the 4 pages to a page Layout to get what you want.
    Does that answer your question?
    G3 DT/SonnetEncoreZIFG4/1GHz/768MB/WingsAV/DVR-106D/psc750xi/graphire4-6x8   Mac OS X (10.4.8)   TempoUltraATA66/120GB Maxtor/120GB Seagate;TangoUSB/FW;ATI9200/204B/172N

  • PCI ATA 66 RAID size limit?

    I was wondering what the max hard drive size is for a PCI ATA 66. And can you make a larger volume via RAID 0 that exceeds that limit? For example, can you combine two 120GB physical disks into a single RAID volume on the ATA66 interface, or will the combined RAID volume size also be limited to <137GB?
    On my system I use a single partition 120GB drive, and backup nightly with DejáVu to another 120GB drive, both are bootable 10.4 sytems. I am about 80% capacity now, and will be planning on adding some space in the future, so I was thinking about getting an external 250GB FW bootable drive for backup, and RAIDing the two 120GB drives into a single 240GB volume, if possible on a single cable on a PCI ATA 66 card.
    <br>
    G3 DT/SonnetEncoreZIFG4/1GHz/768MB/WingsAV/DVR-106D/psc750xi/graphire4-6x8   Mac OS X (10.4.8)   TempoUltraATA66/120GB Maxtor/120GB Seagate;TangoUSB/FW;ATI9200/204B/172N

    The article cited below states that the ATA drive size limit is 200 GB for your Mac.
    86178- Macintosh: Using 128 GB or Larger ATA Hard Drives
    The last reference it cites talks about Volume sizes, and that is the important distinction for RAID. With most RAID schemes, you are creating a larger (or mirrored) Volume out of two smaller Drives (or portions of Drives).
    I suggest you reconsider putting both drives on the same cable. Because of the way ATA/IDE works, there is NO Overlap in commands on a single cable. Each drive must initiate the seek, wait milliseconds for it to complete, and transfer the data in its entirety before any other transaction can begin on that cable. So one drive waits for the other to complete before it even starts its seek.
    Users at MacGurus who are posting their whiz-bang RAID performance numbers in their forum are all using SCSI (which supports overlapped commands and overlapped seeks) or have the two drives on two cables. This allows one seek to start, the other seek to start on the other drive, the wait for milliseconds to overlap each other, and then transfer1 followed by transfer2, or possibly even some overlap in the transfers.

Maybe you are looking for

  • No Inputs in xserver(unable to access /etc/rc.conf to change startup)

    Hello everyone, I've installed arch on an older notebook and of all the steps I could miss, I forgot to add hal to the daemons array in /etc/rc.conf so now when arch boots up it goes directly into xserver(kde) without any input hotplugging resulting

  • Settlement rule not getting defaulted in IW32

    Hi Gurus, This is a specific issue related to the 'settlement rule' defaulting in the refurbishment order.  At the time of creating order and trying to release the order, the settlement rule is getting defaulted in the order, but once I save the orde

  • Cache Notification

    Hi In my ID "cache Notification" cache Instance : Integration Server has cache updated status red square cache Instance : af.sxi.cache has cache updated status red square and                  Perform Notification status has Red square (Notification  

  • Settlement of Service Order

    Dear All , Following is my scenario : I have one service order which have actual cost of 100$ , i make debit memo and generate billing document and relase to accounting with 150$ with profit . Now when i came back to my service order there is nagativ

  • I am trying to access Organizer in Premiere Elements and it just shuts down the programme

    I am trying to access Organizer in Premiere Elements and it just shuts down the programme.  I tried reinstalling the programme but it just does not let me get to Organizer.  Now after reinstalling, it does not let me into the programme.  It just keep