HP Quality Center Adapter ST-QCA

We've just installed solution manager 7.0 ehp1 sr1 and hp quality center.
Is the adapter a separate purchased product for solution manager?
Do I need to purchase and install ST-QCA in solution manager?
Thanks,
Daniel

Is the adapter a separate purchased product for solution manager?
Do I need to purchase and install ST-QCA in solution manager?
The adapter works on 2 fronts, the SAP side and the HP side.
The SAP Interface is free, and can be downloaded from the marketplace however, HP will sell you the Enterprise Integration Adapter which has to be bought along with BPT licenses if you decide to implement automated testing using Quick Test Pro and SAP TAO.
Hope that helps
Cheers!

Similar Messages

  • Quality Center Adapter - Connecting Multiple Solution Manager Systems

    We are running Solution Manager 7/Enhp 1 and Quality Center 10 successfully using the Quality Center Adapter integration. My question is, can we connect multiple Solution Manager systems (i.e. SMP/SMS/SMX) to a single Quality Center server simultaneously? Or is there a one-to-one relationship restriction. Thanks.

    I have answered this question in this post below:
    http://forums.sdn.sap.com/thread.jspa?threadID=2110531&messageID=10962875#10962875
    To quote myself
    Each tie up is based on the logical ports at the Solution Manager end and the relationship between the two entities is between Projects. So if you set up the configuration like you would in a normal scenario and at the right moment, connect the projects in SolMans to the corresponding projects in HPQC, you should be fine.
    Hope that helps.

  • Hp Quality Center Adapter for Solution Manager two-way

    We just recently installed the SAP Adapter for Quality Center 2.0.  The installation worked to the point of sending requirements to QC but when we try to send test results to Solman we just get a "In progress" and it never completes. 
    We reviewed the QC logs and we don't see the url information for Solman in the log. It just blank.  Does anyone have any idea of what the issue could be.

    Hi
    I'm actually in a project where we want to integrate SAP SolMan Stack 18 (EHP1) with HP QC 10.0. So, to my knowledge, we need to have from SAP the SAP Adapter for QC 2.0 (which you have installed) and from HP the HP Enterprise Integration Release 2.0.
    My problem now is, that I can't find anywhere on sap.com this SAP Adapter for QC 2.0. There is only 1.0 available.
    So, as you can imagine, I would be very eager to know where you got this Version 2.0?
    At the moment we got, officially from SAP, this name form a responsible in India who we should contact and nothing else.
    Thanks for clarifying and helping.
    Thomas

  • SAP Solution Manager Adapter for SAP Quality Center by HP (ST-QCA)

    Hello Folks,
    I am configuring Solution Manager, and the current activity asks to download to add-ons that I can't find in the Marketplace - they are required to activate Solution Manager Enhancements:
    SAP Solution Manager Adapter for SAP Quality Center by HP (software component: ST-QCA)
    SAP Support Enablement package (software component: ST-SEP)
    Does anyone know where to get those components?
    Thanks a lot,
    Marco

    Hi Ravindra babu/ Murali:
    I have one very quick doubt and would be really glad if you can help clarify.
    As per documentation from SAP and also IMG screens etc. it seems like 'a project' in SolMan will hand-shake with 'a project' in QC.
    Can I therefore assume that if there is only one instance of SolMan (productive) and one QC server alone (again, productive), any number of trials I carry out between SolMan project and QC project will not spill over into other projects in these two systems and thus have no impact whatsoever at server level.
    The reason for my asking this - in my project, Testing has started using QC in a standalone mode already. We have just one server. If I have to carry out any tests/ demo between SolMan and QC, it shouldn't impact other 'standalone' projects being done in QC.
    Regards,
    Srini

  • ST-QCA: SAP Quality center adaptater

    Hello,
    I would like to test integration between Solution Manager 7 SP14 and Quality Center 9.2 but I need to install the addon ST-QCA.
    This addon is supposed to be on the software download area (SAP ADAPTER FOR QC 1.0 is released since the 02.07.2007), but I cannot find it.
    Could someone tell me where to find it, or send me the addon?
    Thanks, François.

    The documentation I received on the 2 way adapter states that you must be at least Support pack Stack 15
    Download KITLEBA.SAR from the Marketplace
    Review Note 1109650 for installation
    Review Note 1059350 for Configuration
    Maybe this will help

  • Solution manager adapter for HP Quality Center

    Hi All,
    We want to use Solution manager adapter for HP Quality center. Can you please provide some documentation/information regarding it's installation prerequisite, installation process and Licences.
    Regards
    Vivek

    >
    vivek b wrote:
    > We want to use Solution manager adapter for HP Quality center. Can you please provide some documentation/information regarding it's installation prerequisite, installation process and Licences.
    As a first overview:
    [SAP Solution Manager Adapter for SAP Quality Center by HP    |http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000725149&_SCENARIO=01100035870000000202&]
    Best regards,
    Ruediger

  • How do i start doing SolMan integration with HP Quality Center?

    Hi guyz,
    I am new in this SAP field with zero knowledge on it and my first task being assigned to me is to integrate SolMan with HP Quality Center. So how do i start? What do i need to know before doing the integration? As iI know by far SolMan need to have QC adapter to communicate with HP Quality Center. What is the adapter anyway? Correct me if i'm wrong. Really need you guyz expertise on this. Thanks.

    Hi,
    The SAP Solution Manager Adapter for SAP Quality Center by HP is an interface between
    SAP Quality Center by HP and SAP Solution Manager. SAP Quality Center by HP extends
    SAP Solution Manager testing capabilities u2013 together they achieve a full integration of test
    people, test processes and test data in the SAP Solution Manager Application Management
    Platform. The integration on SAP Solution Manager side is realized via the SAP Solution
    Manager Adapter for SAP Quality Center by HP.
    After installing the Adapter, please check the Note: 1285941 for the installation of EIM versions and Solution Manager versions.
    Please refer how to guide in Learning Maps.
    https://websmp104.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000706460&_SCENARIO=01100035870000000202&
    We have to check for the activation of SM_QC_AD Enterprise Addon from IMG activity SAP Solution Manager->Configuration->Scenario-Specific Settings->Activate
    Solution Manager Enhancements.
    Then follow the IMG activity transaction spro: Scenario Specific Settings-> Third Party Integration-> SAP Quality Center by HP-> Integration Test Management & Integration Defect Management.
    Hope this helps.
    Thanks,
    Raghavendra.

  • SolMan integration with HP Quality Center

    Hi Friends,
    Is there any way by which we can integrate Solution Manager with Mercury Quality Center?
    Please let me know.
    Thanks,
    Rock

    Hi Rock,
    The short answer is - yes, you can, after buying a 'Adapter' that SAP sells.
    I am not sure if you have already seen some relevant pages and still have this doubt. In any case, I have listed some places where you would find relevant literature.
    (1) http://service.sap.com/rkt-solman
    In the above link, after supplying your OSS ID and password, you have access to various training documents. One of the links contain SAP Tutor and PDF files on this subject.
    (2) For Adapter information, please got to the following link:
    http://service.sap.com/upgrade
    Click on Product Availability Matrix and then search for Adapter QC in Quick Search for Product Versions  box.
    You would get a window message that confirms that the Adapter is made available by SAP since 13.03.2008
    (3) You also find some more information from 'Online Help' section on Solution Manager
    Trust this helps.
    Regards,
    Srini

  • BW and HP quality Center Report Error

    Hi ,
    We have installed BW7.0 and EP 7.0 . Testing are running from Load runner with HP quality center. It is running some time properly and last minute we are getting error.
    Basicalley performance testing is we are doing on the sap systems.
    Cannot get connection for 60 seconds. Possible reasons: 1) Connections are cached within SystemThread(can be any server service or any code invoked within SystemThread in the SAP J2EE Engine), 2) The pool size of adapter "SAPFactory" is not enough according to the current load of the system or 3) The specified time to wait for connection is not enough according to the pool size and current load of the system. In case 1) the solution is to check for cached connections using the Connector Service list-conns command, in case 2) to increase the size of the pool and in case 3) to increase the time to wait for connection property. In case of application thread, there is an automatic mechanism which detects unclosed connections and unfinished transactions
    Can some body help on this??
    Regards,

    Hi,
    Any ways we can get the log of the error to see here.
    Also see for replicating the problem couple of times, check the log if its different for different tries please paste all those logs here.
    Regards,
    Ravi

  • How to configure SolMan for interfacing with SAP Quality Center

    Hello everyone,
    Our company has only recently acquired and activated the permanent license for SAP Quality Center by HP. We would like QC to interface with SAP Solution Manager. My question is how to perform the configuration steps to make the interface work with Quality Center? I need to set up the IMG addon SM_QC_AD, which can be found under the transaction SPRO, but I need documentation on which steps to take and why.
    I am often referred to SAP note 1059350 and/or the configuration guide, but these only say that I should configure the IMG but not how.
    There is a SAP tutor available on the service marketplace, but I think it's rather uninformative.
    Can I find better documentation elsewhere?

    Hi ,
    [Configuration Guide SAP adapter for SAP Quality Center by HP|https://websmp101.sap-ag.de/~sapdownload/011000358700000612662007E/Adapter_Configuration_.pdf] might be useful.
    Check [Master guide|https://websmp201.sap-ag.de/~sapdownload/011000358700000612672007E/Adapter_Master_Guide.pdf]  also.
    Regards
    Naveen
    Edited by: Naveen kumar Palanichamy on Feb 19, 2009 6:38 AM

  • HP Quality Center Enterprise Integration problem

    Hello,
    I have a problem with the Solution Manager Enterprise Integration for Quality Center. I configured the adapter without any problems. Anything set up, BUT when I try to export the Business Blueprint in solar01 using send to quality center I always get the error QC_INTEGRATION030 "no node selected", even though I selected nodes for export and also the entities have a document in the quality prerequisites.
    Does anybody have a clue what I'm missing, or where the problem is?
    Any help would be appreciated.
    Thanks in advance!

    The root cause seems to be
    XRFC> -
      <
    XRFC>                                                                     <
    XRFC> TRACE SOAP RUNTIME - trace records                                  <
    XRFC>                                                                     <
    XRFC> -
      <
    XRFC> E SOAP_RUNTIME 20090512110746.8590000 : CL_SOAP_RUNTIME_CLIENT      <
    XRFC> ->EXEC_PROCESSING Exception handling in SOAP runtime                <
    XRFC>                                                                     <
    XRFC>                                                                     <
    XRFC> E SOAP_RUNTIME 20090512110746.8590000 : CL_SOAP_RUNTIME_CLIENT      <
    XRFC> ->EXEC_PROCESSING SOAP Fault Exception caught: : com.mercury        <
    XRFC> .erp.spi.qcsmintegration.service.UnknownException                   <
    XRFC>                                                                     <
    XRFC> -
    XRFC> End of user trace
    Would that help?
    Please let me know how I can further circle the problem

  • What is the best quality headphone adapter out there?

    I use a pair of ultimate ears 5 eb pros and I dont want it all to go to waste because i have to go through a low quality headphone adapter. i know the long belkin one sold at the apple store is the only popular one, but is there a high end model worth looking at?

    Sorry, it's called Text+ (Plus) in the iTunes store in the Lifestyle section. I don't use any phone feature but it gives you a free phone number. This is simply so that other people texting you have a real number, not a pass through so they can text back without having to do anything special. All my friends, etc... we just add that number to our contacts as another text option. Works great for the iPad also that doesn't have a native text feature. Here is a link to their website. They have three version for the iPhone. Really nice, for .99 cents.
    http://www.textplus.com/

  • Connecting solution manager to Hp quality center

    Dear friends ,
    could someone please give me the steps involved in connecting Solution manager to Hp quality center to be used for testing purposes , any documents or links describing this configuration will be greatly appreciated
    thanks
    Harsha

    Hi Harsha,
    Check Note: 1059350 - Installing SAP Adapter for SAP Quality Center by HP.
    Here you will find all the steps required.
    Thanks & Best Regards,
    Raghavendra.

  • FREC Error while Generating Reports in Quality Center

    Hi,
    We usually generate reports using Dashboard module of Quality Center . While generating reports on  a particular PC, we are getting the following error.
    The SQL Query <sheet1> has failed to run, with the following error:
    Returned Result is not valid FREC.
    We are able to generate the same report on a different PC.
    Does anyone encounter this issue earlier? Could someone help us out in solving this issue.

    Issue popped up with me a few times and seemingly uncontrolled.
    I resolved one query with replacing quotes in the string i.e. replace single with double by replace([field],chr(39),chr(34))

  • How to test the SAP modules like SD and MM By using Quality Center and QTP

    Hi Experts,
    How to test the SAP modules like SD and MM By using Quality Center and QTP. Can you please provide the documentation regarding this.
    Regards,
    Skumar.

    Hi Sampath,
    First install QTP and SAP Addin with in QTP.
    2nd use QC to develop the test plan and then convert that test plan design to Test Scripts (QTP vesrion using settings)
    3rd record the R/3 GUI screen of SAP for SD, MM like Create order or Create PR.
    Once recording is done QTP will create a script in VB
    SAPGuiSession("Session").SAPGuiWindow("SAP Easy Access  -  User").SAPGuiOKCode("OKCode").Set "/nVA01"
    SAPGuiSession("Session").SAPGuiWindow("SAP Easy Access  -  User").SendKey ENTER
    you can always add a parameter and other customization according to your requirement.
    Let me know if you need more information regarding this.
    Good Luck!

Maybe you are looking for

  • Resetting of partial cleared accounting document

    Dear Experts: I have two invoices from customer. Invoice A is of amount 100 and invoice B is of amount 75. I wanted to clear amount 50 from invoice A. But mistakenly i cleared invoice B. How can i reset the wrong document without reversing it? I am n

  • Outlook will not launch properly after initial attempt at setting up Exchange e-mail

    I initially posted this on the general Outlook forum, but they said it was an Exchange problem so I should post it here for an answer. I recently had to wipe my laptop and perform a clean install of Win 7 Home Professional 64 Bit.  I re-downloaded an

  • Error in account determination:T030K

    Dear all, While doing billing in SD i am getting following error message, Error in account determination: table T030K key XYZ JN7 Message no. FF709 Diagnosis In the chart of accounts to be posted to, no accounts are defined for the tax code you used.

  • Do I need to configure any settings of Virtual Machine for 64bit guests?

    I have installed VirtualBox on a Windows 2008 R2 64bit machine which has Intel Xeon E5506 processor. Now, I have started to create Virtual Machine for: 1. Oracle Linux Release 5 Update 7 for x86 64 (64 bit) 2. Windows 2008 R2 64bit I think I need to

  • Praise

    I have had a  bit of trouble with inconsistent download speeds. I did post on the forums and got a lot of help from the guys  so praise for that. I did phone the BT help line who passed my problem higher up and today BT telephoned me asking if everyt