Hp r007tx hotkeys

though I have instanlled the chipset driver, the hotkeys are not fuctioning for laptop. Pls advise.
hot keys- like Fn+F1 for hibernate, is not functioning

Hi @imman ,
Welcome to the HP forum!
I understand that your hot keys are not functioning. When I checked the specifications for your notebook, I see it came with Free Dos.
What Operating System are you running?
Has there been any recent changes to your system?
Have you done all your Windows updates?
Have you ran The HP Support Assistant to aid with updates and resolving issues?
Have you tried Using Automated Troubleshooting (Windows 8) to help overcome this difficulty?
Here is a link to Notebook Keyboard Troubleshooting (Windows 8) to aid you.
If you would like further assistance, please provide your Operating System and the results from the troubleshooting.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Similar Messages

Why is it not possible to assign a hotkey to onion skinning? (For toggling on/off)

In Flash CS6 when animating frame-by-frame by hand, I'm constantly toggling onion skinning on and off, and the same with the "loop" button right next to it for looping a certain range of frames. Neither of these appears to be assignable to a hotkey, meaning I need to take the mouse/pen away from the drawing and hit these buttons several times a minute, really putting a damper on the workflow.
Might we be able to get this in the next patch? It seems like a no-brainer, especially for a program that many people use for hand-drawn animation projects.

Hi Steve -
Thanks for the info. I have a few more questions...
Andy,
Yes, this is exactly the issue. Currently I am
invoking the UIX servlet not as a registered portlet
but as a hard-coded URL link on the portal page.Are you saying that in order to access the UIX application, the user clicks on a link which navigates out of Portal? If so, is this by design, or did you go this route because of problems creating a portlet for your UIX servlet? That is, would you prefer to have your UIX application run inside of Portal as a portlet, or do you explicitly not want this?
Also, can you provide more background about your deployment environment? In particular, is the UIX application running locally on the same machine as Portal, or remotely on another machine? Is the UIX application running in the same application server/servlet engine as Portal?
The application runs connected to the database but
without the context of the SSO Portal user. I want to
be able to display the Portal username on the uix
pages, have the VPD context in the database
connection (we have striped the tables but it only
works if connected via Portal!!) and potentially have
access to some of the extended Portal functionality
in the JPDK (this last one a "nice to have").Unfortunately I have no idea whether this is possible, so I'm not going to be much help on my own. The best I can do is try to track down someone who can actually speak to this issue. However, given the lack of documentation and the fact that you weren't able to get a solution through support, I wouldn't be suprised to find that this type of integration simply isn't supported yet.
I think you mentioned in the TAR that you had seen support for similar integration with Struts. If you know of documentation which shows how to do this type of thing with Struts, could you point me at it?
Andy

[SOLVED] Hotkeys on Asus 1015 PEM

Hey everyone,
So i've been trying to install arch linux on my Asus netbook (ASUS 1015 PEM) and it's been working spectacularly well. Things have just been working that I wouldnt've expected, and it's really great. My only problem is that I'm currently unable to get my hotkeys to work well. Specifically, the one to blank the screen doesn't work and the sound ones are laggy/buggy.
I followed the guide here to get acpi-eeepc-laptop working:
https://bbs.archlinux.org/viewtopic.php … 43#p881743
and it got a lot of my buttons working. The sound ones work (increase volume, decrease volume, and mute) but they are really buggy. Specifically, they're slow to react and it seems like they almost stack; if i hit increase volume 10 times but the volume is maxed out after 5 times, i have to lower the volume 5 times before i can actually lower the volume. It's like I have to cancel out the other 5 times. It's really peculiar and I was wondering whether anyone has run into similar problems and found a solution.
Here's my /etc/rc.conf:
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# DAEMON_LOCALE: If set to 'yes', use $LOCALE as the locale during daemon
# startup and during the boot process. If set to 'no', the C locale is used.
# HARDWARECLOCK: set to "UTC" or "localtime", any other value will result
# in the hardware clock being left untouched (useful for virtualization)
# Note: Using "localtime" is discouraged.
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
# VERBOSE: Verbose level (from 1 to 8). man 3 syslog for level info
LOCALE="en_US.UTF-8"
DAEMON_LOCALE="no"
HARDWARECLOCK="UTC"
TIMEZONE="America/Chicago"
KEYMAP="dvorak"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
VERBOSE="3"
# HARDWARE
# MOD_AUTOLOAD: Allow autoloading of modules at boot and when needed
# MODULES: Modules to load at boot-up. Prefix with a ! to blacklist.
MOD_AUTOLOAD="yes"
MODULES=(!net-pf-10 !pcspkr loop acpi-cpufreq cpufreq_ondemand eeepc-wmi rfkill bluetooth eeepc_laptop)
# Udev settle timeout (default to 30)
UDEV_TIMEOUT=30
# Scan for FakeRAID (dmraid) Volumes at startup
USEDMRAID="no"
# Scan for BTRFS volumes at startup
USEBTRFS="no"
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
HOSTNAME="luna"
# Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available interfaces.
# Interfaces to start at boot-up (in this order)
# Declare each interface then list in INTERFACES
# - prefix an entry in INTERFACES with a ! to disable it
# - no hyphens in your interface names - Bash doesn't like it
# DHCP: Set your interface to "dhcp" (eth0="dhcp")
# Wireless: See network profiles below
#Static IP example
#eth0="eth0 192.168.0.2 netmask 255.255.255.0 broadcast 192.168.0.255"
eth0="dhcp"
INTERFACES=(!eth0 !wlan0)
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
gateway="default gw 192.168.0.1"
ROUTES=(!gateway)
# Setting this to "yes" will skip network shutdown.
# This is required if your root device is on NFS.
NETWORK_PERSIST="no"
# Enable these network profiles at boot-up. These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network.d
# This now requires the netcfg package
#NETWORKS=(main)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
# If something other takes care of your hardware clock (ntpd, dual-boot...)
# you should disable 'hwclock' here.
DAEMONS=(hwclock @syslog-ng dbus @acpid !network !dhcdbd !networkmanager wicd netfs @crond @alsa)
and my /etc/conf.d/acpi-eeepc-generic.conf
# Configuration file for EeePC ACPI utilities
# Please edit to your liking!!!
# http://code.google.com/p/acpi-eeepc-generic/
# http://aur.archlinux.org/packages.php?ID=23318
# Copyright 2009 Nicolas Bigaouette
# This file is part of acpi-eeepc-generic.
# acpi-eeepc-generic is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.
# acpi-eeepc-generic is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
# You should have received a copy of the GNU General Public License
# along with acpi-eeepc-generic. If not, see <http://www.gnu.org/licenses/>.
# Put your username in "XUSER". It _is_ important.
# Some defaults are defined, but
# they might not work on your system. For example, the task manager
# used is "lxtask", which is part of the LXDE desktop environment.
# You can install it with "pacman -S lxtask". You can use
# something else if you want, just be sure to edit the appropriate
# variable.
# Format:
# Format of the settings is as follow:
# VARIABLE_NAME=("command number 1" "command number 2" "etc.")
# Note that:
# -Commands with spaces _need_ to be double-quoted
# -You can put as many commands as you want, as in the previous example
# -Some defaults are provided which might not work on your
# system. Please edit as your liking. Look at
# COMMANDS_WIFI_POST_UP for example. It uses by
# default "wicd" for for network management. It is killed and
# re-run to save battery. If you don't use wicd, please remove
# it from the commands to run!!!
# -All commands are executed as root. To execute a command as
# yourself (not root), put @ in front of the command. This allow
# graphical applications to work.
# -If a key is not working, uncomment KEY_SHOW. It will show
# you the code of the key you pressed. Then report it to me
# with your model number.
# -Change your wifi module. By default it uses "rt2860sta", which
# is the one used in the 901/1000*.
# -You can choose between different OSD:
# libnotify: by default (GTK), you need "notification-daemon"
# knotify: OSD used by KDE, you need "kdebase"
# dzen: Small OSD, you need "dzen2"
# NONE: You guessed it... none :)
# Different helper script you can use:
# Rotate the screen
# /etc/acpi/eeepc/acpi-eeepc-generic-rotate-lvds.sh
# Suspend to ram
# /etc/acpi/eeepc/acpi-eeepc-generic-suspend2ram.sh
# Toggle bluetooth on and off
# /etc/acpi/eeepc/acpi-eeepc-generic-toggle-bluetooth.sh
# Toggle between different monitors
# /etc/acpi/eeepc/acpi-eeepc-generic-toggle-displays.sh
# Toggle a suspension lock on and off
# /etc/acpi/eeepc/acpi-eeepc-generic-toggle-lock-suspend.sh
# Toggle card reader on and off
# /etc/acpi/eeepc/acpi-eeepc-generic-toggle-cardr.sh
# Change between supported screen resolutions
# /etc/acpi/eeepc/acpi-eeepc-generic-toggle-resolution.sh
# Enable or disable the touchpad (needs SHM)
# /etc/acpi/eeepc/acpi-eeepc-generic-toggle-touchpad.sh
# Toggle webcam on and off
# /etc/acpi/eeepc/acpi-eeepc-generic-toggle-webcam.sh
# Toggle wifi on and off
# /etc/acpi/eeepc/acpi-eeepc-generic-toggle-wifi.sh
# Different hardware states can be saved and restored when needed.
# To restore at boot, just add "eeepc-restore" to your DAEMONS
# array in /etc/rc.conf
### Fallback user to be used for X session if autodetection fails
XUSER=parth
### Choose what kind of notification you want. libnotify is the
### default, but can disable it with NONE.
NOTIFY="libnotify" # Gnome, XFCE, GTK
#NOTIFY="kdialog" # KDE, QT
#NOTIFY="dzen" # dwm, wmii, xmonad or any other
#NOTIFY="naughty" # Awesome window manager
#NOTIFY=NONE
NOTIFY_DURATION="2000" # Duration, in ms, of the OSD
### Show the ACPI key event
#KEY_SHOW="1"
### Some scripts needs to be run as root. Specify how to gain priviledges
SUDO="sudo"
#SUDO="kdesu -i eee"
#SUDO="gksu" # Append "--sudo-mode" to use sudo instead of su
### Drivers used by this Eee. Most used are "rt2860sta", "ath9k"
### and "iwlagn". For Madwifi, you can try this exact list:
### "wlan_tkip" "wlan_ccmp" "ath_pci" "ath_rate_sample" "ath_hal" "wlan_scan_sta" "wlan"
WIFI_DRIVERS=("rt2860sta")
BLUETOOTH_DRIVERS=("bluetooth")
CAMERA_DRIVERS=("uvcvideo")
# Let acpi-eeepc-generic load/unload modules?
#DRIVERS_LOAD="no" # default: yes
#DRIVERS_UNLOAD="no" # default: yes
### Volume options
ALSA_VOLUME_MIXER=("Master") # Mixer(s) to change volume
### Defined commands on specific key press
### Please edit to what you want!!!
### Some defaults are provided, but they might not work on your
### system if you don't have the utility installed.
COMMANDS_POWER_BUTTON=("/sbin/shutdown -t3 -h now")
# Users of LXDE might consider the following:
#COMMANDS_POWER_BUTTON=("@_LXSESSION_PID=`pidof lxsession` lxde-logout")
# See http://code.google.com/p/acpi-eeepc-generic/issues/detail?id=26
# and http://wiki.archlinux.org/index.php/LXDE#Shutdown_and_Reboot_from_LXDE
# These are the 4 silver buttons, located above the Fn+F2 to
# Fn+F6 on certain models and the Fn+Spacebar. The first just
# shutdown your screen to save power. The second toggle the touchpad on and off.
# Note the "@" in from of the two user button commands: because
# of this, theese commands will be executed as yourself and not root.
# The User1, User2 & User3 (when available) are executed as your username!!!
COMMANDS_BUTTON_BLANK=("xset dpms force off")
COMMANDS_BUTTON_RESOLUTION=("/etc/acpi/eeepc/acpi-eeepc-generic-toggle-touchpad.sh")
COMMANDS_BUTTON_USER1=("@terminal")
COMMANDS_BUTTON_USER2=("@pcmanfm --no-desktop")
COMMANDS_SHE_TOGGLE=("/etc/acpi/eeepc/acpi-eeepc-generic-toggle-she.sh")
COMMANDS_SLEEP=("/etc/acpi/eeepc/acpi-eeepc-generic-suspend2ram.sh")
# On some models, calling the wifi toggle script can prevent the card from
# being re-enabled. If you have that problem, just don't call the script and
# let the BIOS dis/enable the card.
# See http://wiki.github.com/nbigaouette/acpi-eeepc-generic/wireless
COMMANDS_WIFI_TOGGLE=("")
COMMANDS_WIFI_UP=()
COMMANDS_WIFI_DOWN=()
COMMANDS_WIFI_PRE_UP=()
#COMMANDS_WIFI_POST_UP=("/etc/rc.d/wicd start" "@wicd-client")
#COMMANDS_WIFI_PRE_DOWN=("pkill wicd-client" "/etc/rc.d/wicd stop" "pkill wpa_supplicant" "pkill dhcpcd")
COMMANDS_WIFI_POST_UP=()
COMMANDS_WIFI_PRE_DOWN=()
COMMANDS_WIFI_POST_DOWN=()
COMMANDS_BLUETOOTH_TOGGLE=("/etc/acpi/eeepc/acpi-eeepc-generic-toggle-bluetooth.sh")
COMMANDS_BLUETOOTH_UP=()
COMMANDS_BLUETOOTH_DOWN=()
COMMANDS_BLUETOOTH_PRE_UP=()
COMMANDS_BLUETOOTH_POST_UP=()
COMMANDS_BLUETOOTH_PRE_DOWN=()
COMMANDS_BLUETOOTH_POST_DOWN=()
COMMANDS_TOUCHPAD_TOGGLE=("/etc/acpi/eeepc/acpi-eeepc-generic-toggle-touchpad.sh")
COMMANDS_RESOLUTION=("/etc/acpi/eeepc/acpi-eeepc-generic-toggle-resolution.sh")
COMMANDS_BRIGHTNESS_DOWN=() # Brightness down controled by BIOS
COMMANDS_BRIGHTNESS_UP=() # Brightness up controled by BIOS
#COMMANDS_SCREEN_OFF=(/etc/acpi/eeepc/acpi-eeepc-generic-rotate-lvds.sh)
COMMANDS_SCREEN_OFF=("${COMMANDS_BLUETOOTH_TOGGLE[@]}")
#COMMANDS_XRANDR_TOGGLE=("@lxrandr") # Run as user (not root)
COMMANDS_XRANDR_TOGGLE=("/etc/acpi/eeepc/acpi-eeepc-generic-toggle-displays.sh")
COMMANDS_XRANDR_TOGGLE_VGA="above" # VGA is: right-of, left-of, above or below of LVDS
COMMANDS_TASKM=("@lxtask")
#COMMANDS_TASKM=("@xterm htop")
#COMMANDS_TASKM=("@ksysguard")
# If you use OSS, you can use http://ossvol.sourceforge.net/
COMMANDS_MUTE=("alsa_toggle_mute")
COMMANDS_VOLUME_DOWN=("amixer set Master 5%-")
COMMANDS_VOLUME_UP=("amixer set Master 5%+")
COMMANDS_AC_UNPLUGGED=()
COMMANDS_AC_PLUGGED=()
COMMANDS_ON_LID_CLOSE="yes"
COMMANDS_LID_CLOSE_ON_AC=("xset dpms force off") # Just turn the backlight off
#COMMANDS_LID_CLOSE_ON_AC=("${COMMANDS_SLEEP[@]}") # Do the same as COMMANDS_SLEEP
COMMANDS_LID_CLOSE_ON_BATTERY=("${COMMANDS_SLEEP[@]}") # Do the same as COMMANDS_SLEEP
### Check for these processes before suspending
SUSPEND_BLACKLISTED_PROCESSES=(vlc mplayer smplayer kmplayer skype dragon songbird-bin amarok)
### Change the suspend commands.
SUSPEND2RAM_COMMANDS=("echo -n \"mem\" > /sys/power/state") # Simple suspend
#SUSPEND2RAM_COMMANDS=("pm-suspend") # Use pm-utils
#SUSPEND_QUIRKS_VTSWITCH="yes"
### Display toggling options (excluding LVDS only, since you
### need that one!). You can use any of these three, in any order.
#XRANDR_AVAILABLE_MODES=("clone" "vga" "both")
XRANDR_AVAILABLE_MODES=("vga" "both")
### Restore feature: On boot, restore different hardware states
RESTORE_BLUETOOTH=0
RESTORE_BRIGHTNESS=0
RESTORE_TOUCHPAD=0
RESTORE_WIFI=0
### If you mount /var/log in ram (to protect an SSD drive), you
### might want to backup them on shutdown/suspend, just in case.
### Add "logsbackup" to your DAEMONS array in /etc/rc.conf. You
### can also set the folder where to send these compressed backups.
LOGSBACKUP_FOLDER="/logs_backup"
### Please comment/remove the following, to prove that you edited
### and read fully the file ;)
### Else, you will get a 20 second warning.
#EEEPC_CONF_DONE="no"
#EEEPC_MODEL="1015PEM"
#EEEPC_CPU="Atom"
Any help would be greatly appreciated, thank you!
-parth
Last edited by plutoisaplanet (2011-05-20 23:07:03)

Okay, I was able to fix the issue by disabling the volume commands in etc/conf.d/acpi-eeepc-generic.conf (as shown in the code)
COMMANDS_MUTE=("")
COMMANDS_VOLUME_DOWN=("")
COMMANDS_VOLUME_UP=("")
and then having openbox bind the volume keys to commands (amixer sset Master toggle, amixer sset Master 5%+, etc.).
It's a workaround but it works.
As for blanking the screen it's not the biggest issue in the world so i'll probably leave it for another time.
-parth

Not able to find driver page for HP 15-r007tx

Not able to find driver page for HP 15-r007tx.
The web site is able to detect my product, but when clicked on link Software & Driver Downloads, it says page not found.
Please help. I am looking drivers for windows 7 ultimate.

Hi Anoop22Sharma
Install:
Intel Chipset Installation
Intel Video Driver
NVIDIA High-Definition (HD) Graphics Driver
Synaptics Mouse Driver
Realtek Ethernet Controller Drivers
MediaTek(Ralink)802.11 b/g/n Wireless LAN (WLAN) Adapter
Ralink Bluetooth Software Driver
Intel USB 3.0 Driver for Intel 8 and U/Y Series
Realtek High-Definition (HD) Audio Driver
Realtek PCIe Media Card Reader Driver
HP 3D DriveGuard

Is there a way to hotkey between Input Methods?

Dear all,
My macbook air has a JIS/Japanese keyboard. I use two IMEs which translate to “Select Word” (I’ll call it ‘Japanese IME’) and “Chinese Word-Complex Characters” (I’ll call it ‘Chinese IME’).
The Japanese IME uses hotkeys such as “ctrl+shift+k” and“ctrl+shift+j” to switch between Japanese writing styles.
For the Chinese IME, I only use one method, chongkit, its hotkey is “ctrl+shift+c”.
While using the Japanese IME, “ctrl+shift+c” does not activate chongkit. I have to use my mouse and click select from the options in the top right. Likewise, while using the Chinese IME, I cannot hotkey the Japanese writing systems.
The issue is clear… the Chinese and Japanese IMEs do not interact.
It is easy for me to exit the Chinese IME. The JIS keyboard has keyboard keys that can put me in English or Japanese.
I write English (including this posting) with the Japanese IME’s roman character option.
So, is there a way I can hotkey chongkit from the Japanese IME?
Or, is there a way I can hotkey switching between IMEs?
Note, this is not an issue specifically about Japanese and Chinese IMEs, this is an issue with IMEs in general.
Thank you

The option that you referenced only cycles between your two most recently used input styles. It does not change the IME, unless one of the recent ones was coincidently from another IME. If the combination is pressed shortly after starting the system, then it only cycles through English and a Japanese phonetic system. Anyway, this is not what I need.
If command is held and then space bar is pressed, a box appears that permits me to cycle through all styles, I can eventually get to chongkit. Also, alt+command+space cycles through all the options without the box. It is better than the mouse, but I would rather cycles the IMEs.
The goal is to go immediately from the Japanese IME to the Chinese IME, not cycle around styles within one IME.

Hotkey (Ctrl+B) is not working after migration from Forms 6i to 10g

Dear Gurus,
Need your help regarding the following problem:
After migrating from Forms 6i to 10g (Rel 2), Ctrl+B (used to list the blocks in a form) hotkey is not working anymore (all other hotkeys are working fine). I've checked my FMRWEB.RES and it contains an entry for Ctrl+B:
66 : 2 : "Ctrl+B" : 70 : "Block Menu"
Additional Information:
OS: AIX
NLS_LANG = UTF8
fmrweb_utf8.res also contains the same text for Ctrl+B as above.
I tried to reproduce it on my Windows Machine (with NLS_LANG set to AMERICAN_AMERICA.WE8ISO8859P1) and its not working as well. I don't have right to put move files on AIX server but i can try anything (on my local system) suggested by the Oracle gurus.
Best Regards,

Dear Gerd,
"are you sure, that it is the hotkey"
Yes, i am dead sure. Since:
(1) It was working fine in forms 6i
(2) If you run a form and select Help => Keys, you will see Ctrl+B on the top of list
The problem is its not taking into account the keys which i am defining in the file (although i am following the same procedure detailed on metalink.oracle.com).
Regards

How do I get my keyboard hotkeys to work on itunes while it's minimized?

On my keyboard I have keys for the normal stuff (pause, play, stop, forward, back) and they all work with itunes but only if itunes is open...which sort of defeats the purpose. Is there a way to get them to work while itunes is minimized to the tray?

I'm trying to find a PC compatible keyboard I can buy that will interact with iTunes while I'm in other applications.
Google "itunes hotkeys windows" and it comes up with several results for third party plugins. (No thanks)
This should be a built in feature IMO. In those plugins they use things like ctrl+inert/pg down/pg up/etc to navigate your music when you're not in the iTunes window.
This is one area where Winamp has an advantage, since it has hotkeys built in.
At work, however, I use a mac with the cast aluminum keyboard that has the pause/play, forward/backward keys built in and they work when I'm in any app. They aren't usually very responsive (I have to tap relatively hard) but they do work.
For now I'm still browsing.

How can I remove a hotkey in Firefox, I don't want anything to happen when i press ALT

When I press ALT the menubar pops up, I use ALT as a PTT button so it is very annoying. I would like to customize the hotkeys for Firefox if possible.

Anyone having the same problem as me, get this add-on [https://addons.mozilla.org/sv-se/firefox/addon/personal-menu/ Personal Menu]

Can't get panes to re-size with hotkeys

I have a small annoyance whereby sometimes my hotkeys to re-size existing panes doesn't work. I had changed the hotkeys to move from pane to pane to be Alt-Left (arrow) and Alt-Right (arrow) key. After looking at the default settings by running tmux's in-pane help (the hotkey shift-?) I commented those two keys out thinking that would reset tmux to its default behaviour. It hasn't worked so far and I'm not sure where else to look aside from my .tmux.conf file. It's based on Thayer's own config:
#~/.tmux.conf - tmux terminal multiplexer config
# Based heavily on Thayer Williams' (http://cinderwick.ca)
## Environmental Options
# Enable tmux to use a 256 colour terminal
# Provided the underlying terminal supports 256 colours, it is usually sufficient to add the following to ~/.tmux.conf:
set -g default-terminal "screen-256color"
set -g terminal-overrides 'xterm*:smcup@:rmcup@'
# If you SSH into a host in a tmux window, you'll notice the window title of your terminal emulator remains to be user@localhost
# rather than user@server. To allow the title bar to adapt to whatever host you connect to, set the following in ~/.tmux.conf
set -g set-titles on
set -g set-titles-string "#T"
# open a man page in new window
bind m command-prompt "split-window 'exec man %%'"
## By default, all windows in a session are constrained to the size of the
## smallest client connected to that session, even if both clients are
## looking at different windows. It seems that in this particular case, Screen
## has the better default where a window is only constrained in size if a
## smaller client is actively looking at it. This behaviour can be fixed by
## setting tmux's aggressive-resize option.
setw -g aggressive-resize on
# mouse-select-pane [on | off]
# # If on, tmux captures the mouse and when a window is
# # split into multiple panes the mouse may be used to
# # select the current pane. The mouse click is also
# # passed through to the application as normal.
set -g mouse-select-pane on
## Upon starting to use tmux, I noticed that I had to add a noticeable delay
## between two characters in a command sequence for it to recognize the
## command, for example between the C-a and n in C-a n. This is because tmux is
## waiting for an escape sequence. Fix that by setting escape time to zero.
set -s escape-time 0
### Hotkeys and Commands
## Binds
# set prefix key to ctrl+a
unbind C-b
set -g prefix C-a
## Quick way to mosh/ssh into another system bound to S [Shift-S]
bind S command-prompt -p 'SSH to:' "new-window -n %1 'mosh %1'"
# reload config without killing server
bind R source-file ~/.tmux.conf \; display-message "Config reloaded..."
# toggle last window like screen
bind-key C-a last-window
# more intuitive keybindings for splitting
unbind %
bind v split-window -v
bind - split-window -v
unbind '"'
bind h split-window -h
bind \ split-window -h
# send the prefix to client inside window (ala nested sessions)
bind-key a send-prefix
# confirm before killing a window or the server
bind-key k confirm kill-window
bind-key K confirm kill-server
# toggle statusbar
bind-key b set-option status
# ctrl+left/right cycles thru windows
#bind-key -n C-right next
#bind-key -n C-left prev
#bind-key -n M-right next
#bind-key -n M-left prev
# open a man page in new window
bind m command-prompt "split-window 'exec man %%'"
# quick view of processes
bind '~' split-window "exec htop"
# scrollback buffer n lines
set -g history-limit 5000
# listen for activity on all windows
set -g bell-action any
set -g bell-on-alert on
set -g visual-bell off
# on-screen time for display-panes in ms
set -g display-panes-time 4000
# start window indexing at one instead of zero
set -g base-index 1
# disable wm window titles
set -g set-titles off
# disable auto renaming
#setw -g automatic-rename on
# border colours
set -g pane-active-border-bg default
#set -g pane-border-fg blue
# wm window title string (uses statusbar variables)
set -g set-titles-string "tmux:#I [ #W ]"
#set -g set-titles-string "tmux"
# session initialization
#new -s0 -nTTYtter 'ttytter'
#neww -t0:1 -nvifm 'vifm'
#selectw -t 1
### default statusbar colors
set -g status-fg white
set -g status-bg default
set -g status-attr bright
### White Yunzi - statusbar
set -g status-interval 1
set -g status-justify centre # center align window list
set -g status-left-length 30
set -g status-left '#[fg=white,bright] [ #[fg=green,bright]#H#[fg=white,bright] ]#[fg=white] Up #(uptime | cut -f 4-5 -d " "|cut -f 1 -d ",")'
set -g status-right-length 30
set -g status-right '#[fg=green,bright][#[fg=white,bright] %a %m-%d-%Y %H:%M #[fg=green,bright]]'
### Silver Yunzi - statusbar
# set -g status-interval 1
# set -g status-justify centre # center align window list
# set -g status-left-length 30
# set -g status-left '#[fg=white,bright][ #[fg=blue,bright]#H#[fg=white,bright] ]#[fg=white] Up #(uptime | cut -f 4-5 -d " "|cut -f 1 -d ",")'
# set-option -g status-right '#[fg=yellow]%k:%M #[fg=blue]%a,%d-%b#[default] '
# set -g status-right-length 30
# set -g status-right '#[fg=blue,bright][#[fg=white,bright] %a %b-%d-%Y %H:%M #[fg=blue,bright]]'
# set-option -g status-right '#[fg=yellow]%a:%M #[fg=blue]%a,%d-%b#[default] '
### Pink Yunzi - statusbar
# set -g status-interval 1
# set -g status-justify centre # center align window list
# set -g status-left-length 30
# set -g status-left '#[fg=white,bright] [ #[fg=magenta,bright]#H#[fg=white,bright] ]#[fg=white] Up #(uptime | cut -f 4-5 -d " "|cut -f 1 -d ",")'
# set -g status-right-length 30
# set -g status-right '#[fg=magenta,bright][#[fg=white,dim] %a %m-%d-%Y %H:%M #[fg=magenta,bright]]'
### White Yunzi - active window title colors
set-window-option -g window-status-current-fg green
set-window-option -g window-status-current-attr bright
set-window-option -g window-status-current-bg black
set-window-option -g window-status-current-attr bright
### Silver Yunzi - active window title colors
# set-window-option -g window-status-current-fg blue
# set-window-option -g window-status-current-attr bright
# set-window-option -g window-status-current-bg default
# set-window-option -g window-status-current-attr bright
### Pink Yunzi - active window title colors
# set-window-option -g window-status-current-fg magenta
# set-window-option -g window-status-current-attr bright
# set-window-option -g window-status-current-bg black
# set-window-option -g window-status-current-attr bright
### default window title colors
# set-window-option -g window-status-fg white
# set-window-option -g window-status-bg default
# set-window-option -g window-status-attr bright
### Silver Yunzi - command/message line colors
set -g message-fg white
set -g message-bg black
set -g message-attr bright
# show some useful stats but only when tmux is started
# outside of Xorg, otherwise dwm statusbar shows these already
#set -g status-right ""
#set -g status-left ""
#if '[ -z "$DISPLAY" ]' 'set -g status-left "[#[fg=green] #H #[default]]"'
#if '[ -z "$DISPLAY" ]' 'set -g status-right "[ #[fg=magenta]#(cat /proc/loadavg | cut -d \" \" -f 1,2,3)#[default] ][ #[fg=cyan,bright]%a %Y-%m-%d %H:%M #[default]]"'
#if '[ -z "$DISPLAY" ]' 'set -g status-right-length 50'
Insights appreciated!

No--
In the Motion tab... right click the video in the sequence and send to viewer...
Then under the MOTION tab... twirl down the DISTORT triangle and then check the aspect ratio there... set either to 0, 33 or -33.
Good luck,
CaptM

Is there a way to change the hotkey for starting firefox in safe-mode?

The current default hotkey is shift. Holding it when starting firefox will start it in safe mode (true story). My super duper favorite handy windows hotkey for starting programs pinned to the task bar in windows 7 is windows_key + shift + #, and that conflicts with the firefox setting, and i always end up starting firefox in safe mode because im that lazy.

Greetings!
I'm an irssi user, and I have awesome mouse gesture addon for it, and I'm afraid I can't live without it anymore.. But it requires Shift key for opening links, therefore Firefox, as my default browser, always starts in Safe mode :(
I'm not a programmer, easiest workaround would be modifying the irssi addon, but I suck on that, too.
If there's a way to bypass Safe Mode in Firefox, or at least a way to change the Shift key to something else, that would make my miserable life a tad easier.

Hotkeys no longer working - ThinkPad Edge 14, Windows 7

Hello,
my hotkeys to control volume, brightness, wifi, microphone, webcam no longer working. Some hotkeys (previous track, play/pause and next track) still works fine. I had this problem two times before and in this cases bios update helped. But now, i have newest BIOS version and i can't update BIOS...Simple restore BIOS properities to default didn't work...I have exactly the same problem on Windows 7 Professional 64bit and Ubuntu Linux 10.10 32bit. Any ideas how to fix this or i must use my warranty?
I'll be very grateful for any advice!
Thinkpad Edge 14 O578KNG

f1 at startup, into the bios. config should be highlighted, enter. power, enter. make sure hibernate by timer is enabled. f10 to save and exit. yes, boot to windows.
T430u, x301, x200T, x61T, x61, x32, x41T, x40, U160, ThinkPad Tablet 1838-22R, Z500 touch, Yoga Tab 2 Windows 8.1, Yoga Tablet 3 Pro
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
If someone helped you today, pay it forward. Help Someone Else!
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Media player hotkeys doesn't work with Windows Media Player 11

Hi;
I upgraded my windows media player 10 to 11 version. Now my hotkeys doesn't work. I was wondering if there is a way to solve this problem.

Hi
Do you mean the Toshiba Control buttons which control the WMP function like play, pause, stop, etc
On some Toshiba notebooks the Toshiba control buttons can be configured manually.
Please check this in the control panel -> Toshiba controls.
If you will be not successful I would recommend reinstalling the Toshiba utility again

External ThinkPad USB Keyboard with TrackPoint issues with scroll (55Y9003) and hotkeys on a x201

Hello
Once more there is a glitch with the drivers for this external keyboard 55Y9003.
I have the drivers:
16.2.19.13 for the ultranav system of the x201
1.10 for the external keyboard
My system is XP sp3.
The keyboard of the x201is fine relative to the one 55Y9003.
The scrolling is set to standard for both systems.
Please do not advise to select smooth; it is not a solution and the smooth scrolling has been systematically utterly unusable.
The issues:
-the hotkeys on the external keyboards are not all working:
basically, fn+f4 and fn+nmlk work but the rest does not (say fn+f8)
-the scrolling of the external keyboard is not at all identical to the scrolling of the x201.
For instance, in pdfs viewed with foxit for instance, I have not a problem to scroll horizontally with the x201 starting with the hand tool.
WIth the external keyboard, whan I press the middle button to activate the scrolling, it remains the hand tool, I can scroll vertically but not horizontally.
FIrefox as also issues whith the middle button.
-the external keyboard still suffers from the sticky shift key.
I know the x201 and the 55Y9003 are no longer fashionable, but Is there some directly guy working at Lenovo who could help ?

I have the ThinkPad USB keyboard on a non-Lenovo desktop, and it works.
Yes the keyboard driver installs, but not the Lenovo System Interface Driver, for obvious reasons. All the buttons and TrackPoint work.
Yes the TrackPoint does not scroll in all programs. Search the community for "trackpoint scroll fix" and you will come up with instructions on how to fix this.
I don't work for Lenovo. I'm a crazy volunteer!

W530 Hotkeys stop working with Firefox

Hey Guys,
I just received my w530 about a week ago and the laptop was pretty fast and everything was working well until I watched a youtube video on Firefox. When I pressed play/pause on the interface my volume hotkeys on my keyboard wouldn't work. It would start working again if I clicked on the volume icon. So I figured I probably just needed an update. I update the machine and I get even more errors with my machine saying something about some files lost and it was being fixed.
I fully update everything including the BIOS and I'm still gettng the same Firefox problem. I don't really want to reformat or feel like I should have to reformat a new machine. I do know that the problem is within FIrefox because I tested it on Chrome and IE and didn't get the same problems....Help anyone?

Did Youtube decide to switch to HTML5 for you? That might be why.
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

[SOLVED] Suspend hotkey broken in gnome 3.2

Hi,
After upgrading a lot of pacakges, many of them related to gnome 3.2, the hotkey for suspending stopped working. Suspending still works fine using the menu. I have an acer 3820TG laptop, and the hotkey use FN+F4 keys combination. What's strange, though, is that the rest of FN+XX hotkeys still work. Has anyone else experienced something similar? I am looking at the wiki for troubleshooting tips and possible workarounds, but haven't found the reason behind this problem yet. Any help is appreciated,
jorges
Edit: The issue disappeared after upgrading the system
Last edited by jorges (2011-10-21 10:07:42)

wonder wrote:in fact it might be a regression only in 3.2.1 introduced here:
https://bugzilla.gnome.org/show_bug.cgi?id=660267
You're probably right, as updating the system yesterday fixed the issue. I'm marking the thread SOLVED. Thanks for you help.
jorges

Hp r007tx hotkeys

Similar Messages

Maybe you are looking for